#141

[@KAMiJUINs]

The Verreal RS Pro + Mad wheels reviewed this time was not flashy but very attractive boards. Among them, the performance of the movement was overwhelming and I was personally very satisfied. If you love street-type wheels and pavement rides, it's worth considering. The boards used in the review were supported by Verreal. RS Pro - verrealboards.com/products/verreal-rs-pro-electric-skateboards-longboards Mad 105mm wheels - verrealboards.com/products/verreal-mad-105mm-wheels 이번에 리뷰한 Verreal RS Pro + Mad wheels은 화려하지는 않지만 매력이 참 많은 보드였습니다. 그중에서도 무브먼트 성능은 압권이였고 개인적으로 너무 만족스러웠습니다. 스트릿 타입의 바퀴와 포장도로 라이딩을 사랑한다면 정말 고려할만합니다. 리뷰에 사용된 보드는 Verreal로부터 지원받았습니다.

[@RobertCole1981]

I would love to watch you customize this board in white! 👌 (I also have the RS Pro, and I'm very happy with it 👍 except I have cloudwheels.)

[@KAMiJUINs]

I think it'll be not easy to change it to white lol :) Yeah, I thought it was a good board after riding it. If you have a chance, experience the Mad Wheel. Thanks~

[@TrOlsalot]

I have another question about the verreal, how is the regenerative braking when u let go of the throttle? does the speed decrease significantly when u let go of the throttle or can u let go and roll for awhile?

[@RobertCole1981]

@@TrOlsalot I have the RS Pro and a Wowgo 3X. If you're thinking that regenerative braking will be like a Tesla when you let off the throttle, you'll be mistaken. Both free roll, and only brake on reversing the throttle. But I can say that I've got the dreaded overcharge buzz on both boards free rolling down hill. Didn't risk it, and dragged my foot to slow me down. Hope that helps.

[@MadDonJuan]

Great review. As an ex ambassador to Verreal I can say they are great boards, I still ride the first version of the RS and it has well over 6,000 miles and still goes like new. I also been testing them wheels for a yr. Now and haven't take them of the RS max since, by far my favorite urathanes. Not shore it they told you but the wheels are From "Madesk8" My main Sponsor in Colaboration with Verreal. Great Video Bro. Thanks for sharing

[@KAMiJUINs]

Thank you for letting me know, bro :) and thank you for coming as always~

[@KAMiJUINs]

11:49 - Harvey Wing ------> Hobbywing

[@Numbzeh]

Just recently getting into electric skateboards and ordered my first board. from all the content creators in the scene that i've come across, your style of aesthetically pleasing though informative as well videos & reviews have been some of my favorite and played a huge part in me picking the board I did. Definitely a fan and cannot wait to see what you bring to your channel next

[@esk8unity]

“pleasing” is definitely the right word for his content. i couldnt think of the right word, but u hit the nail on the head 👌🏼👌🏼🤙🏼🤙🏼🤙🏼

[@Numbzeh]

@@esk8unity Its definitely some of the more enjoyable content i've seen on this side of youtube so far. Also, crazy enough, I actually ended up watching some of your videos to help decide on my board too lmfao. I was considering the b-one balrog at first so i checked out your videos on it, ended up going with their Hercules model in the end though

[@esk8unity]

@@Numbzeh ahh nice nice! hope u enjoy it 🤙🏼🤙🏼🤙🏼

[@KAMiJUINs]

I love you guys so much lol :) I'm glad my videos made someone to be pleasing.~

[@mrreddington777]

Agreed man. Been watching him for a long time and he is amazing.

[@AlexRodriguez-nv9pr]

The boosted 105 wheels are easily the best wheels I've ridden. So smooth and grippy. I got an original set from Boosted and they got over 1000miles going strong

[@KAMiJUINs]

I agree with you, and I think Mad wheels will, too~ Thank you for watching :)

[@eBoard3R]

*So nice seein a Verreal on your channel* ⚡🤩🤩⚡ My ideal board, very happy with my RS so far. I've got blue caguamas on mine, still considerin Mad 105s for group rides... Great video again bro! 👏🏼👏🏼 Thank you for the range test 👌🏼

[@KAMiJUINs]

I've known through Insta that you recently bought this board. So when I took the video, I wondered how you would feel about your RS. lol You know I'm always grateful, right? HaHa :)

[@eBoard3R]

@@KAMiJUINs Really enjoyed the riding footage in this, the little paths, the deep turns 👌🏼⚡👌🏼

[@fujio001]

Great review! MAD wheels are made of soft 72a urethane. The urethane allows for great range while still being super grippy when turning. These wheels are a collaboration between Verreal and MAD ESK8. They are identical to the original Boosted 105 wheels. Made in the same factory as the originals but available at a way lower price!

[@KAMiJUINs]

Thank you for the exact information ~ :)

[@ratheonhudson3311]

I think that's the cutest angle of Kami I've seen. Also, this is a work of art! Transparent grip tape looks great!

[@KAMiJUINs]

Thanks, bro~ :)

[@2424jhg]

Was on the fence about these wheels, decided to get them after watching this.

[@KAMiJUINs]

In my experience, I'm sure you'll be satisfied if you like the same style of riding as me :)

[@jeanprofite8339]

Yep 👍 vidéos toujours aussi bien 👍

[@KAMiJUINs]

Merci d'avoir regardé, mon ami.~ :)

[@esk8unity]

Iv been sayin, boosted 105 r my favorite “big wheel”. Which these are the same 👍

[@KAMiJUINs]

Yes It was :) I'm watching your new wheel video, too. lol :D

[@jonassvensson1819]

Do the Mad wheels work with Kegel pulleys? I am very interested in softer rubber wheels that look like normal wheels and 105 mm is perfect.

[@fujio001]

Yes. They work with Kegel pulleys. Keep in mind the wheels are 72a urethane. Awesome range while still being super grippy.

[@KAMiJUINs]

Thank you for the answer~

[@jonassvensson1819]

@@fujio001 Thank you!

[@mitsuracer87]

My first eskate was a Verreal RS with 20Ah 10s4p battery and 105mm cloudwheels. I went DIY shortly after, mainly because I wanted a large deck due to my size 13 feet. My DIY is 11.1" wide, compared to the Verreal which I believe is around 9" wide. I did enjoy the feeling of the dkp trucks though for carving and never had any issues with the board. I sold it to my friend and I think it has a battery issue now since the board won't turn on anymore.

[@KAMiJUINs]

Oh, no~~~ It is suspected that the battery is fully discharged.

[@DrewElia]

fantastic review, love the wheels and how soft they are! grip for days!!

[@KAMiJUINs]

You should experience the mad wheels when you have a chance :) Thank you for watching ~

[@DrewElia]

@@KAMiJUINs fantastic videos that you make. Truly love them!

[@_Zer0202]

you always bring good things to the channel good review bro 😊👍

[@KAMiJUINs]

Thank you for saying that, Bro :) Yeah, I'm trying to do like that way~

[@user-fi6hg8vq6c]

I have the original RS. Would love to try out a set of these wheels

[@KAMiJUINs]

I hope you try it~ Thank you for watching :)

[@johnglover4318]

Very nice video, basically the same board as the Onsra but lower price. I want those wheels!

[@KAMiJUINs]

when you have a chance, experience the Mad Wheel.~ Thank you for watching :)

[@johnglover4318]

@@KAMiJUINs Thank you, yes I am very interested in the wheels. Perfect size, wide contact patch and soft. Very good and entertaining video

[@Acherus1432]

Great review Kami! I am a big fan of your videos because you are so technical with your reviews. Can I get your advice between getting the Verreal RS Pro or the B-One Hercules since you reviewed that board as well? Which has better range, torque and top speed? Thank you.

[@KAMiJUINs]

RS pro - nimble, (12s3p) Hercules - longer range, stable (12s4p) Since both use a 12S battery configuration and have similar ESC output, the maximum speed and torque change are almost the same depending on the wheel diameter or gear ratio used. Thanks!

[@mayyank82]

Fan of your style of making videos. Was a treat watching you ride such a pretty and carvey board. What bushings/hardness was used on this board? I might use them in my DIY. 😁

[@KAMiJUINs]

I think the bushing hardness is about 90-92A Thank you for watching :)

[@mayyank82]

@@KAMiJUINs thanks for replying. Did you experience any vibration due to the wheels at low speeds? I read a few people talk about it.

[@esk8omg]

So happy you got them how do you like them 😀

[@KAMiJUINs]

It's not fancy, but I think it's an attractive board with good basic skills. Especially with Mad wheel :) Thank you for watching as always, bro~

[@adriananto5499]

Great review, thank you! Do you know if the TITAN-X55 motors can be mounted on this board? Is there enough space for the motors and are they compatible with the ESC?

[@KAMiJUINs]

The number of sensor pins on the motors will be different. This board's motor has a 5-pin sensor and the X-55 has a 6-pin sensor. I've done an experiment with this before and there were many errors when I connected with HobbyWing ESC except for the temperature sensor on the 6-pin sensor. And since the current output of ESC remains the same anyway, it is hard to expect a big change even if the motor can be replaced. Thanks~

[@tedan1998]

와우 영상 잘봤어요^^ 매드휠 궁금하네요 일반 st바퀴에 비해 배터리 많이 잡아 먹겠죠? 이볼브 보드에도 장착이 가능할까요?

[@KAMiJUINs]

네 시청감사합니다~ 바퀴 풀리(Kegel)만 맞다면 당연히 사용가능합니다. 그리고 지름차이가 많지않아서 전비 차이도 거의 없다고 봐도 될것같습니다.

[@andrejoslakovic3476]

My board did die after 6 months . ECS and BATTERY by by . But is cheap board so what to expect .

[@cezarykorecki7641]

Hello KAMi! Thank you for all your reviews. I have been riding on e-boards for over 3 years. First a GT Bambbo with AT tires. Then GT Carbon with AT tires. Currently GTR Bamboo - first with 97mm evolve wheels, then Airless Eovan Rubber 105mm, then ABEC 107mm and from yesterday Verreal Mad 105's. I use original Evolve bearings and Evolve 32T gears. I am very concerned because I can feel the vibrations coming from the MAD wheels. All of them. Front and rear. Of course, I tested on smooth asphalt. Important: the frequency and strength of the vibrations are most troublesome at slow speeds. Above 30 km / h they become less noticeable. The vibrations do not affect the driving stability. Please, Can You help me?

[@KAMiJUINs]

I think it's a phenomenon that happens often on new wheels that are soft. I think it'll be okay if it's worn out a little more. Also, for your information, the 40T pulley was a good match with the wheel. And should check the condition of the bearings too. Thank you for watching~

[@clintroberts1]

Yeah I noticed the vibration too on my Madesk8's. My Cloudwheels 105mm do something similar but I thought it was more to do with the ridges on the outside of the tire ("tread"). Kinda frustrating really. Faster speeds do help make it less noticeable. I am thinking the Cloudwheels are the smoother of the two with less thud on sidewalk cracks and less vibration too. I've never slipped out as I dont ride aggressively (just carvy) so I think my Cloudwheels are still it until the new Momentums Hollow comforts get here in January to test. I dont like the rubber wheels out there either. Too much drag and range loss. I'm hoping someone figures out small pneumatics.

[@linaandersson5815]

Great board for the price! Nice footage. Are the Mad wheels really rubber? If they are of less weight and obviously wider contact patch than other rubber wheels they are very interesting. Verreal should thank you for this video.

[@KAMiJUINs]

I'm not sure know the exact material, but I've always felt rubber. And someone told me it might not be rubber. I need to ask them about the exact material. Thank you for watching :)

[@KK001]

A guy in the comment above said theyre made of urethane.

[@linaandersson5815]

@@KK001 OK, but soft apparently.

[@TrOlsalot]

@KAMI JUINs Hello I'm thinking of buying the verreal RS pro or the normal RS, But since this is going to be my first board I'm not so sure what their actual differences really are, I know that that they are using different batteries and that the RS pro is slightly faster. I've watched some reviews and some say the RS is better than the Pro and some say the opposite. What is ur opinion on this?

[@KAMiJUINs]

Hi~ The difference between the RS Pro and RS is the difference in torque and maximum speed due to the difference in the number of battery bolts and the discharge rate. Instead of the 12S battery configuration, RS Pro has good torque and maximum speed, the battery has a short range than the RS due to its small total capacity. If you are big or want more torque and top speed, choose "Pro" model. If not, RS would be enough.

[@TrOlsalot]

@@KAMiJUINs Would u recommend the mad wheels over the all terrain wheels for a beginner? I've been skating and longboarding for years so i think i can get the hang of it pretty quick, I was thinking of starting with the AT wheels for a safer ride and then switching to the mad wheels if i want more range/gotten comfortable with the AT wheels.

[@simpkahn]

As always, love the vid bro! keep it up :)

[@KAMiJUINs]

Thank you so x 1000 much, mate :)

[@acarrillo0024]

Great content as always! Do you prefer the Mad 105s over the 165 Cloudwheel Rovers? Was thinking about getting the 165s but sounds like the 105s are a better option for my RS (10s4p 16ah battery). Thanks for posting!

[@KAMiJUINs]

Each rider may have a preference, but in my case, I think Mad wheels are more right. Thank you for watching as always~ :)

[@BigO-Stonks]

brooooo i need to know how you made that flower pattern on the deck. it looks great. also i love the content so keep it up.

[@KAMiJUINs]

I didn't make it myself~ Check this out! verrealboards.com/

[@bisuh7]

Now l am your real fan, verreal rs pro is the perfect esk8 for me with 7inch wheels as a intermediate board as you recommended. I could go around, as l wish, at any places near my house. The only one concern is my wife is angry at the board, and still worried about a high speed accident.

[@KAMiJUINs]

HaHa~ :) I hope you can ride it without any worries! And I'm glad you like it, too

[@Allebaggen1]

Nice video, just ordered the wheels now! How did u get the RS Pro with that grip tape? Its all black on there site?

[@KAMiJUINs]

Thank you for watching~ And I received the board assembled on the old deck due to their being out of stock. If you want a deck like me, contact them.

[@ratheonhudson3311]

I wonder if there's a limit to how wide you can make wheels for traction and grip and yet make it soft

[@KAMiJUINs]

I'm curious, too. I think the reason why it can't be extended too wide easily is probably durability and stability

[@ualoopmusic5808]

Nice board :D

[@뀨잇-w3v]

그립테이프가 투명인가요??

[@KAMiJUINs]

그립테이프는 아니고 유리가루를 뿌리고 점착시킨 형태입니다.

[@오리다-e9u]

베리얼 rs 20ah 사용유저입니다 개인적으로 이보드의 장점은 낮은 가격에서 오는 가성비가 좋은거같습니다. 데크가 엄청나게 하드해서 무빙 자체가 무게중심을 누르는 만큼 무브먼트가 나와서 좋은 무브를 보여주지만 데크가 하드해서 충격이 많이 오는게 단점이기도 한거같습니다

[@crabcrackcrap5694]

저도 1년 정도 사용했어요. 처음엔 발이 많이 아팠지만 지금은 그런가 합니다. 모터 하나가 말썽이었죠. 전반적으로 만족하지만 품질과 서비스는 의구심이 듭니다.

[@KAMiJUINs]

시청감사합니다~

[@obonekay]

What :3ildcat does for The Mech Keyboard enthusiast community , you do for the eskate community! I highly appreciate that! Thank you for such amazing videos!

[@KAMiJUINs]

Thank you for saying that and watching :)

[@ConvidadoVip-jk3wm]

Where can I buy new wheels straps?

[@jb_terahertz]

How did you get that deck? . The rs pro comes with black grip tape.?

[@KAMiJUINs]

They sent me the deck of the previous model because there was no new black one. Maybe if you like the deck in this video, ask them to email it before you order.

[@ConvidadoVip-jk3wm]

Can I put gear drive in this Verreal RS pro?

[@황호성-w5t]

영상 잘 보고있습니다. 좀 생뚱맞긴 한데 전동보드 헬멧을 알아보는 중이라 혹시 헬멧이 어느브랜드 모델인지 알 수 있을까요?

[@KAMiJUINs]

국내브랜드인 "홍진" HJC 트랙스타 제품인데 단종된지 좀 되었습니다. 현재는 구할수 없는 제품으로 알고있습니다. 시청감사합니다~

[@johanarifin5191]

🤤 dream not come true

[@worachart111]

nice.. nice Wheels

[@KAMiJUINs]

it was awesome~ you should try if you have a chance!

[@allroundermusiclover]

Does the battery have bms installed?? I dont see it when you open the battery.

[@KAMiJUINs]

Almost all finished products contain BMSs in the battery pack. And of course, it's included in the board!!!

[@nsxlai2000]

How’s the grip between the board and the feet? It doesn’t seem to have grip tape on the board (unless the pattern is the grip tape?)

[@crabcrackcrap5694]

instead of grip tape, grains of sand are spread over the deck. so if you want to put the grip tape on it you should grind the surface of the board. the grip is pretty good. sometimes the sand came off the board but it did nothing to weaken the grip.

[@KAMiJUINs]

It's a transparent form of glass powder. The grip was good enough :)

[@nsxlai2000]

Thanks for the reply. I like the aesthetic of the board….. love the review!

[@chengarfield4726]

nice!

[@maxsioulas7794]

awesome i need those wheels...

[@KAMiJUINs]

Yeah, It was good enough to used~ I hope you try :) Thank you for watching!

[@pchoice0]

제대로 된 바퀴가 와우 소프트하고 충격도 적고

[@KAMiJUINs]

네~ 사용한 바퀴 정말 괜찮았어요. 시청감사합니다!

[@archellegil928]

wish can afford that one

[@KAMiJUINs]

I hope you can try it someday and thank you for watching ~

[@crabcrackcrap5694]

온스라 115mm 70a 미포 110mm 73a경도에 고무휠. 이건 72a 폴리우레탄인것 같은데 재질상 차이점도 있나요? 비교가능할까요? 그리고 도로말고 벽돌길이나 작은 자갈길 주행느낌 알고 싶어요. 주행후 피로감 같은거요.

[@sinjh111]

까미님도 항상 안라하세요 !

[@KAMiJUINs]

준희님 오랫만이세요 ㅎㅎ 시청감사합니다 :)

[@mrreddington777]

Where’s the doggy?????

[@KAMiJUINs]

He's next to me now lol ~ Thank you for watching :)

[@닉네임-t3s]

굿굿 (영어 몰라서 한글로 쓴거아님)

[@KAMiJUINs]

ㅎㅎ 시청감사합니다~ :)

[@mbsquidward]

F

[@KAMiJUINs]

???

[@steveshot81]

This board has 4 reviews and out of the 4 reviews 3 people are having issues with the board.So what does that say?DO NOT BUY THIS BOARD

[@KAMiJUINs]

I haven't seen anyone else's review of this board yet. So I can say that it's okay to buy the RS Pro + Mad wheel that I experienced. Thanks!

[@steveshot81]

@@KAMiJUINs it’s on their website

[@shawnchambers3416]

Spend 2-3k OR educate yourself. I have 1k and now I can do anything in esk8 world or you can dole out twice as much and get help for everything forever

[@stradedigital3725]

🔸power button short circuits if you go over a puddle. instant power off/on/off/on/off over and over while riding 🔸silicone gasket doubles in size in 2 months. doesn't even fit holes anymore. 🔸support is a joke, Victor is a salesman. better help from esk8 forums 🔸deck screws always loose. loctite them and they'll chew into the wood. you'll have to destroy the deck to get them out 🔸waterproofing inexistent 🔸you can stick a screwdriver into the battery pack and touch the cells. pray there's never a loose screw inside that enclosure. 🔸grooves on enclosure cut the blue plastic on battery pack due to road vibrations 🔸shock absorbing tape over battery pack instead of under. wrong side mate, wrong side 🔸paralell groups not insulated from each other 🔸flimsy battery pack fiber glass as thin as paper. nickel strips break from the pack flexing. board dies while riding. had to redo battery pack with PROPER standards 🔸BMS NOT bipassed on discharge lead. kiss breaks goodbye if overheating/undervoltage/anything happens. HUUUGE SAFETY HAZARD!!!