2007 Volkswagen Passat 2.0L Diesel Clutch Replacement

07376369067
www.williamsmo...
Support the Channel Donate:
www.paypal.com...

[@pcgrey69]

I spent twenty years in the garage and can honestly say I wish I had 10 lads as good as you. Brilliant video step by step process. Well practised and knowledgeable and to do all that on your back fair play to you

[@WMCS]

Your review means a lot coming from someone who’s been in the trade for that many years ..,, thanks for the support and word of encouragement.., really appreciated ✨🍻🍻🍻

[@sendheron1]

Great video no messing about or no annoying music, just showing you exactly what's involved, some strength too, to be able to lift that gearbox & put the bolts in at the same time😳wow best part of the install easy, great job👍👍👌

[@WMCS]

They’re not that heavy once you do one or two .,

[@paddrivers]

The Master....anyone who think this games easy, give it a go on your driveway .👏

[@WMCS]

It’s not for the faint hearted is it Phil .,, that’s where we separate mechanics from technicians 🍻😁✨

[@ivandrago1267]

@@WMCS yeahhh! 😉☺

[@jemmace2586]

@@WMCS My Cousin is a Mechanic, he's worked at Mercede's, Porsche, VW... all of them, over the years. He says the same as you Kevin, There;s lads who swap parts and the one's who truly know their craft. I do my own work on my car, confidence permitting... using a 3 tonne jack and stands, not easy at all and certainly not the standard or speed you work at. Hat off mate, you're always efficient and dilligent.

[@dantolhurst7802]

I did the c1 last week off the guide much appreciated.. u made it look easy hahaha

[@pauljblo]

Is red rubber grease the best one to use for the clutch spline? Wondered what grease to buy?

[@CrazyHHO19]

i get well tired after 2-3 hours of work on cars...clutch take much longer and you still had plenty strength left in you..its not a small job and you managed to film it.well done to you rome salute you..

[@WMCS]

That’s great you realise the work that has been put in to get these repairs on video .,, thanks for the support

[@davidbird1599]

I've just done my passat today using your video following it and managed to do it I needed help from a friend to line the box back up but apart from that I managed. You make it look another easier than it was . Thank you for making the videos you have saved me a fortune

[@WMCS]

Thanks for the feedback

[@kmcca08]

One of the nicer clutches to do, most time consuming is the drive shaft bolts! Awesome job as always!

[@WMCS]

Yes it takes a little bit longer than the conventional driveshaft. But nonetheless a great design ✨✨🍻🍻🍻

[@deninsrmic4165]

Laborious but amazingly very accurate undertaking which you managed pretty well Kevin. Thanks for recording it on VW Passat B6. I watched your recordings on B7 and other VW models but this is the first one on B6 which is brilliant. Thank you very much working on my car here Kevin, you helped me out tremendously and car drives so smoothly now. I am glad I have hired you. Keep up good work. Many thanks for you labour and help. 👍👍👍👍👍👍👌👌👌👌👏👏👏👏. Merci.

[@WMCS]

Thanks for a great review. It was a pleasure meeting you and having a chat .., all the best for the future. Kind regards. Kevin-Albert.

[@iulianconstantin221]

Good job, thanks to your presentations I managed to replace my own clutch, respect!

[@alessandrer3616]

The best mechanic in UK ! Thanks for sharing ! Respect man !

[@danutababei9922]

Ai las-o si tu acum, cel mai bun mecanic din UK! Munceste si el saracul la aia care nu se incumeta sa mearga la un service adevarat. Daca te uiti, cam toate masinile la care lucreaza sunt tigai vechi.

[@abergbe1]

This must be the most exacting clutch exchange of all those services which he has done. Impressive performance indeed!

[@bahatyrishmatov5721]

professional. genius. I wish you success in your business. thank you for the video.

[@WMCS]

Thank you for the encouraging words ✨🍻🍻

[@jennifernicholas523]

Great video, no talking, just showing what you need to do. Excellent.

[@fillo1971]

Tutta la sequenza sembra di una semplicità unica, ma non lo è affatto. Sei un maestro e se non fosse che io ti scrivo dall'Italia, sarei assolutamente senza ombra di dubbio il tuo cliente assoluto. Sei un Maestro. Grazie per i tuoi video. 👍🏻💯💪🏻

[@t5jerry]

very clever, "pre-soaking" the bolts before removal, sign of a TRUE mechanic.

[@WMCS]

✨😁🍻🍻.,, always. I go round two or three times and keep soaking them up. I’m surprised you noticed that 💫💫

[@t5jerry]

Have a couple of questions if you don't mind. 1. Will you fit a clutch kit that the customer supplies ? 2. Which in your opinion is better quality, SACHS or LUK, I think the Sachs clutch is slightly more expensive, but I've also been "told" they are better quality ??

[@ScarbadosSlim]

I've got this exact job to do on my 2008 1.9 b6 when the parts arrive, but I've gone for the single mass conversion instead. Thanks for another fantastic video. Just like you I'm doing it on the driveway, so let's hope I find it as relatively straightforward as you make it look.

[@WMCS]

Ouff..

[@ScarbadosSlim]

@@WMCS I did the clutch on my old Mk2 Mondeo diesel on the driveway and also did a complete Subaru EJ22 conversion in a 1972 VW camper. I'm very experienced at rolling around on the drive, swearing and losing tools. Just hate the way this shit always seems to need doing in the middle of winter. Oh well... If only every clutch was as easy as on my old Cavalier.

[@milanlilic8419]

Majstor,puno si mi pomogo tako da smo mnogo naucio,i skino i namestio menjac kao ti! Hvala,pozdrav iz Srbije!

[@swms9679]

Another awesome video, i just changed the clutch on my Corsa using your videos as a guide, couldnt have done it without it, thank you Kevin!

[@WMCS]

That’s great John.,, glad the video came through for you .,,

[@swms9679]

@@WMCS it was by far the hardest job iv done on a car but i enjoyed it, you make it look like its nothing 😀

[@RoarFossdal]

Thanks to this video I was able to change flywheel, clutch and pressure plate 😃 fantastic video, even bleeding went well! Lots of respect and thanks from Norway 👍

[@MekanixFlow]

Hadde du løftebukk Roar, eller tok du det med akrobatisk letthet som vår superhelt her?

[@RoarFossdal]

Det ble uten løftebukk, men med god hjelp av en som sto over motorrommet og hjalp til å løfte den av og på. Den girkassa var tung nok, så det er imponerende å se supermann løfte girkasse som om det var en liten startmotor 😅

[@MekanixFlow]

😂👍 Ja for oss vanlige dødelige så er det nok ikke dumt med litt hjelp heller nei 😂👍👍

[@rodrigocampos5438]

Hi , you did my Van Today, really good service, great man!!! Really Professional!!! 😁

[@WMCS]

Rodrigo..🤩✨✨..,, by the time tour son mentioned it I was nearly done. Otherwise I would have filmed it 🍺🍻🍻..,, it was a pleasure .,, and it drove lovely afterwards

[@roy9727]

Iv'e been in a mechanic since i left school in the late 70's and always had the facility for doing this kind of work on a workshop lift, and in years gone by iv'e done the odd clutch change on someones drive, and once in the pouring down rain, that was unpleasant to say the least i couldn't/wouldn't do it now (I'm in my late fifties), we don't see your face but i suspect your a young man, and that's what it is, its a young mans game, it's damned hard work doing a clutch change on the floor, hat's off to you mate, all the best..

[@WMCS]

Hey Roy. Always great to hear from a fellow mechanic.,, thanks for taking time for sharing on our forum. I’m young enough. 43yrs. But reckon I can smash this till my early 70’s. 🍻😁 The mask is purely for protection. The consequences of being exposed to oil and clutch dust can be detrimental. So no chances are taken here .,, especially doing it on a daily basis. .., Hope you’re keeping well .,, be sure to subscribe for more videos. 😁✨🍻 Regards Kevin-Albert

[@NWIE76]

Without doubt, the best instructional video I have watched on the tube to date 👍 A job I will surely be taking on with my B6 soon as I have a rattling noise in there somewhere after the first start of the day until the clutch is depressed! Thanks so much Brother for the upload. Wishing u and yours many blessings 👍🇮🇪

[@pierrevilliere7921]

Congratulations kevin , the road mecanic teacher !!! we believe when we see the video that the work is easy but !!!! your the best !

[@greensboy1]

hello, I wanted to thank you that without you I would not have dared to change my clutch of my volkswagen passat motor bkp year 2006, thank you very much for your videos, it has helped me to change the clutch without problems, thanks

[@WMCS]

Thanks for the feedback. Really glad to know the video came in handy. 🍻

[@superuser87]

You make it look so easy bro. U do it like a king. Best video on KZbin. Thank you!

[@1b9e7n3z]

Congratulations, mechanic Stig, you do a great job only I saw, maybe Im wrong, you greased a little bit more than normal the primary, everything is amazing and thanks for the video, very motivate, regards by Spain

[@WMCS]

Yes a little bit more love is being given to these gearboxes 🍻🍻😁

[@cupo6178]

Profesionalno odradjeno,uzivao sam gledajuci video👍👍👍👍👍👍

[@capitanpiruleto]

Right now, im stuck on the bolts on the flywheel on my passat. Lets see tomorrow....the hard part its to put the gearbox back. I love your move with the leg on the jack while hanging the gearbox.

[@slhedn6749]

Vw is really the best !! You can see how everything is high quality and good placement unlike other brands

[@aston0708]

Amazing the way he pops all types of gearbox in a matter of seconds,,,,,and then gives a little smack on the bot,,,lol

[@stephenlyons5649]

Super job can't fault the man, made it look simple, well done mate 👍👍👍👍

[@mixandfix7]

You make it look so easy i had to fight it two people to put it back , great job and thanks for helping vid

[@Niels.OZ3NO]

@ Kevin-Albert Williams This is the best video i have seen in my whole KZbin life: I love that you do not say anything in the video, but only point because you can get so damn confused if you also have to listen to someone who explains what is being done. I'm going to change the clutch and flywheel on my 2007 Passat 2.0 TDI. And this video has really made it easier for me. Really Good Video ....

[@myshots101]

Hi. This is my first time watching one of your videos. Just an FYI. If you use a motorcycle jack, then you can use that to hold the transmission on and off the car. It will save your back. It will also make it pretty easy to put it back in there without tiring. I had to do the clutch on my mr2 twice and that motorcycle jack holds the transmission just perfect since they have that odd shape.

[@WMCS]

Thanks a lot for taking time to leave us a feedback and for the advice with regards to the jack. Very much appreciated 🍻🍻✨✨✨

[@akhlaqsawar7683]

Fantastic video mate I might attempt replacing my clutch after watching your video 😃

[@WMCS]

An extra pair of hands might come in handy lifting the box in/out they weight a tidy sum ..✨✨

[@mohammedzahboune824]

I've subscribed because you deserve it. The product you present is high quality in everything.

[@WMCS]

Thanks. Really appreciate the support

[@anthonyoreilly3983]

Excellent job Excellent video Excellent camera work

[@WMCS]

Thanks for the feedback

[@nikolatesanovic5640]

Nice job,never use cleaner on flywheel because u have grease in springs and i'll always replace crank oil seal.Wish u a good luck u have amazing skills.

[@WMCS]

Thanks for the support. Out of curiosity what would you personally use to dr grease the surface of the flywheel..,

[@nikolatesanovic5640]

@@WMCS I use a old cloth lightly soaked in petrol, i don't spray the cliner because it pours inside and dissolve grease in dmf,just wipe lightly and that's it.

[@Franz_giblet]

Do you torque the flywheel/pressure plate bolts or just know him tight to go with the gun? Great videos 👌🏻👌🏻

[@WMCS]

I just go by feel. ., If it’s stretch bolts as soon as it hits hard I get a 90• turn on top. If it’s solid bolts as soon as it hits hard I get a 45• turn on top. Thanks for the support. ✨🍻🍻

[@EnemyDwarf-TTV]

please say you used a torque wrench on those wheel bolts because i didn't see one in your hand the whole video.. just the Buzzy gun.

[@ademiarmin]

31:31 Did you guys noticed in every video when @Kevin put the new clutch in, he do a circle and slap that clucth. (like good boy) ! . haha :D:D:D

[@WMCS]

🍻🍻✨😁..,

[@diypapie8428]

Yeah he does that also stroke's the hood when openings or closing like ( be a good boy) Only can say respect from a bus mechanic 🍻

[@adrianalbertopanuccio8497]

Very good Kevin !! Warning gear box man !! Heavy and dangerous manipulation More you have muscle and inteligent . And more ...simplicity !! Good worker !! Salutations of argentina !!!

[@WMCS]

Saludos 🍻🍻✨✨🥩

[@jakehollins9836]

Hi just a quick one, I'm taking this job on myself, but I've been told I need the self adjusting clutch tool, although in the video, I see you use only the clutch alignment tool, how necessary is the self adjusting tool? The tool is supposed to give the flywheel the correct preload on to the flywheel I've read. Thank you an kind regards

[@WMCS]

Jake to be honest I haven’t used one. Never had any problems to date with just the clutch alignment tool.

[@jakehollins9836]

Top man thank you, hopefully mine goes as smooth as this 🤞🤞 one of the easier ones I'm led to believe. Great work buddy, you do a great job of positioning the camera so we can see exactly what's going on. Keep up the great work !

[@fizaraja2205]

I love watching your videos and in fact i did change yaris clutch cuz of your detailed video’s. Top Man 👍👌

[@WMCS]

Thanks babar ✨✨✨✨☕️☕️🚬

[@jassongege1523]

he's good as working alone I did mine on Golf IV, same gearbox, same clutch, I just needed help by a freind to lift the gearbox to put in place , I got scared that I wiggle the gearbox by myself and something happen, we don't know.... you get under the car and you start thinking bad scenario.... otherwise all by myself, and I'm no machanic I am a nurse. I just like to do things myself... so he is very good the guy 5 stars.

[@vasileconstantinpalade9663]

I really liked what you did on this passat I think I'm going to start changing the clutch myself after watching this video you posted on KZbin Thanks for everything

[@WMCS]

Glad I could help

[@typiak56]

Salut, encore une superbe vidéo, tu utilise quoi comme dégraissant ? nettoyant frein en bidon ou autre.

[@t5jerry]

have you ever thought of getting into "wrestling" , the way you do your moves on these gearboxes, i think you`d be a natural . 💪💪

[@WMCS]

😁✨🍻🍻😆

[@abrahamvelazquez3852]

Decente AND hardwork put food on the table, blessings

[@WMCS]

Thanks mate.

[@bensnare1181]

An other cracking video but wasn't the same without the rain lol good job Kev

[@WMCS]

Ben looking at the forecast you shouldn’t be too disappointed with the next video., We have summoned the 🌧 rain gods🤩🍻✨

[@andresalvarez3631]

Great video. One question: Is it necessary to remove the fluid from the gearbox?

[@jorgefonseca9225]

Great vedeo 👏👍👍 we must said the true this guy is a really good mechanic 👌 this guy is a really fucking good 👍 👏 he knows really about this caind of the work cheers from Portugal 🇵🇹

[@WMCS]

Thanks for a great feedback and for supporting the channel 🍻🍻

[@PLASTERKINGCOUK]

top graft there mate really enjoyed watching i bet you were buzzing when wheels go back on ooooof

[@WMCS]

Render king to be honest ., I get that buzz when I turn up fo the repair. There’s always a level of adrenaline rush ...

[@PLASTERKINGCOUK]

@@WMCS yes I can tell I work outside too rendering obviously my attitude is the same right let's have it... If you don't feel that you shouldn't be doing the job... Really good work mate I've watched 5 hours today and loved it all buzzin off you haha. Keep it up

[@mobilrz]

Absolute quality job. I like how you take a moment after you fit the flywheel and clutch then run your hand over it like a proud dad! What is it with these 2.0 litre Passats, think you've filmed 3 to date. Just wear and tear. Done any A4 2.0 litre TDIs?

[@WMCS]

You captured that in words like a picture .., there’s a great sense of satisfaction whenever the clutch is finally bolted on.., I do it all the time even when I’m not filming 😁😂.. All three ones are different engine code variants .,, there’s slight difference in the build

[@messaoudaboudissa4935]

Merci pour tout et bonne continuation... شكرا جزيلا على كل المعلومات المفيدة والتي فيها الكثير من الخبرة.... Merci

[@poppo2003]

Great work every time 💪👍. What kind of degreaser do you use in the pump sprayer??

[@markknights5109]

A would I say clutch and brake cleaner wot do I know???

[@WMCS]

Definitely brake cleaner .,, but any solvent works just as good

[@martinshaw4676]

I’ve got a 2007 golf with the same lump and gearbox, it’s got 199k on the clock and the clutch pedal travel is more or less none existent but does have good bite tho

[@WMCS]

It’s definitely getting close to that time .., I’d say it’s the flywheel that’s slowly giving in ..,,

[@josematos6030]

OLA SOU DE PORTUGAL TAMBEM SOU MECANICO SO TENHO UMA COISA PARA LHE DIZER VOCE ESTA DE PARABENS E UM EXCELENTE PROFISSIONAL UM TRABALHO DESSES FEITO NA RUA A PORTA DO CLIENTE NAO E PARA TODOS 5 ESTRELAS

[@WMCS]

🍻🍻🍺🙏🏽

[@robertcochrane9491]

the kit you took off wasn't a self adjusting clutch the one you fitted was and you supposedly need a special fitting kit to fit it properly you just banged it on no problem lol i could do the job but could never put the box back being a weakling by myself good video nice work

[@WMCS]

Thanks for the review.,, never had any issue using the £10 clutch alignment tool compared to the £1200 alignment tool .,, one thing I’ll point out tho., always tighten down bolts in increments until fully tight. And the adjuster in the clutch plate are there to pick up any slack as the friction plate wears down rather than a fitting adjustment.

[@offbeatwarble]

Good job, on a side note, how do you find your van, has it been reliable? Have you had the dreaded injector fault?

[@WMCS]

So far the van has been good as gold .., Considering it’s only a 1.5, because I drive very long journeys the likelihood of the engine getting clogged or injectors failing is almost zero to none .., One thing with Piezo injectors they like heat to work efficiently and long range .., I drive on average 2 hours each way. So it’s very unlikely to get clogged up.

[@charlesdale5965]

Wow! Gotta feeling you've done this before.

[@WMCS]

Once or twice 😁🍻✨

[@PaulGomes-nc4yq]

Hi Kevin did one of these the other day only took 7 hours 😂 on a dead end narrow lane with a brambles bush to my side as I worked in the rain! 😂 trying to follow your foot steps! Would it ever be possible to come work with you for a week?

[@colin5064]

If you owned a VW/AUDI which required a new DMC would you go Luk or Sachs based on your experience.Which of the two brands would you chose for quality and longevity? If anyone knows its probably you. Cheers Col.

[@WMCS]

Colin for VAG engines I will always go for LUK it’s more expensive than SACHS., Reason being *LUK’s pressure plate has an automatic adjuster built in between the contact surface and fingers .,, *LUK’s pressure has designed a vent system in the plate cover to allow maximum airflow to keep the friction plate cool., Sachs hasn’t got the extra features which in my opinion *causes the clutch system to heat up and as a result damages the thin spacers in the flywheel., *on very long journeys the pressure plate springs becomes rigid which makes the clutch pedal feels hard. A lot more pressure on the slave cylinder. For a Non DMF I will always go for Sachs as the flywheel design allows air to flow freely through the cut outs .,, What I’ve found over years clutch wears 50% Quicker due to lack of air flow .,

[@colin5064]

@@WMCS Hi Kevin, thank you so much for sharing you experience and hard won knowledge.I will be following you good advice and buying a Luk DMC in the future for my Golf Mk 6 1.6 tdi cayc.I very much appreciate your detailed answer,thank you for taking the time. Stay safe and strong in your work,glad you always use double axle stands and removed wheels under the vehicles you service.

[@mohammedzahboune824]

Hello Kevin! I have a passat b6 2009. Last summer, I changed its clutch. It was a LUK clutch. Everything was fine. But recently I've noticed that the gear shift gets hard to engage in the first gear. This usually happens at stops. It isn't frequent but it occurs from time to time. What could be the cause?

[@WMCS]

Bleed the clutch system again and see how you get on.

[@mohammedzahboune824]

@@WMCS Thanks a lot. Does this mean that liquid pressure doesn't operate well?

[@kanfida]

This man is awesome honestly this video is informative

[@samirsamir2882]

you are the best of the best anonymos mechanique auto of world👍🏼👍🏼👍🏼👌👌👌✌✌✌

[@sudinebabz8651]

the great clutches warrior !

[@WMCS]

🎉😁🤩✨.., salut sudine..

[@sudinebabz8651]

@@WMCS salut Kevin , c est toujours un plaisir de te voir travailler 👍🏽

[@dragan216]

Great video. Which milwaukee do you use?

[@WMCS]

It’s the M18 Fuel.

[@ryanravencaller]

Now time to put it through the paces, WHATS IT GOT STUNTMAN?!

[@WMCS]

It’s got everything you’d expect from a Passat 🍻✨✨

[@joseantoniorodriguezcontre3106]

Un gran video, muy laborioso y mucho trabajo para cambiar el embrague. Felicitaciones desde España

[@WMCS]

Merci

[@MsMicheal12345]

editing brilliant and top job there kevin

[@WMCS]

Thanks for the feedback.,, and happy new year

[@andrewprichard2209]

Love your videos mate, keep up the good work, what size is the quick jack you use on some of your jobs?

[@WMCS]

Thanks .,, I’ll get some details and post it re: quick jack 🍻🍻🍻

[@adrian-stefan3053]

Hello! I watched with interest how you changed the clutch to the 2007 Passat. Great!👌 I would have 2 questions: 1) Last week I changed the following at my Diesel Passat (BKP 2005) to a service in Austria: Reconditioned gearbox (6-speed manual HDV), new complete clutch kit from Valeo and shift cable - new (3C0 711 265AD). The company from which I bought the reconditioned gearbox (Getriebezentrum Europa) , expressly requested in the Warranty Certificate that 3.8L oil be poured into the gearbox because the gearbox was completely disassembled and reconditioned (those from VW in Exchange say 2,3-2,4 Even if the box has been completely disassembled), The same Company says further: it should be changed after between 500-1500Km and again after 20000km, on the contrary, I do not benefit from the guarantee. What do you think? What do you think about quantity? Why is there such a difference from what VW says? Have you ever encountered something like this? 2) Now when I start from the spot, while I leave the clutch slightly and accelerate at the same time, in the middle of the clutch pedal stroke, there is a tremor (the car shakes a little at that moment, which is also felt by the other passengers). The same thing happens when I want to stop and apply the clutch before applying the brake (speed of 3-5 km / hour). At the service I complained about this fact which was not present before and He was told to drive 1000km, until the components run in because they are new (I didn't feel anything before because there were lose) ... He said he also made the necessary adjustments to reset the cables / gearbox. However... Today I took the car out of service and I keep thinking about these 2 problems. From what can it be? Have you ever faced such problems? Thanks! 👋

[@WMCS]

Definitely follow the gearbox company’s instructions. This will make sure all the gears are properly coated with oil. Then drain and re fill with correct amount. Did you change the clutch kit and flywheel..?

[@adrian-stefan3053]

@@WMCS Sure, as I wrote I changed everything starting from the hydraulic pressure bearing to the double table flywheel everything new from Valeo (because the kit from Sachs arrived incomplete-without flywheel and the mechanic said to mount it) . Today I was to VW to change winter wheel and he said that is not normal. It's a problem with clutch- but what? They can't get involved in the work done by another service, but they can mount them again if I want - for a fee of course.

[@MisdaadKanaal2K22]

37:40 damnnn you did go into beast mode... Even in the garage we shout for a second person to help fit it in😅😅

[@WMCS]

✨🍻😆.,, it wasn’t that bad to be honest. Harder when standing up I suppose.

[@steven907]

Another great job by Kevin top class👍👌👏👏👏

[@jamiedpsiphone3g]

Great video showing how to do the job. hat off to you made that look easy on the drive well done !

[@pabloetchepare7160]

excellent tutorial !. thanks for sharing. impeccable made. Now I have to repair my passat. :). Thank you for doing this . Pablo.

[@kevinoakes1171]

Great job dude. That crappy little tin plate cover behind the o/s drive shaft cup with the 10mm bolt though....!, good thing you knew it was there, sneaky bastards at VW would have me fighting with that box all day for the sake of a hidden 10mm !. Haha.

[@WMCS]

It’s a right struggle getting the box out without removing that little shield. 😂😂.,, I learned the hard way many moons ago.

[@imperia777]

Great job. Which engine is that Passat?

[@deninsrmic4165]

PD TDI

[@imperia777]

@@deninsrmic4165 I meant the engine code. BMP?

[@deninsrmic4165]

@@imperia777 oh, it’s BKP, can’t be BMP as this is 16v.😁

[@imperia777]

@@deninsrmic4165 I see. thanks

[@deninsrmic4165]

@@imperia777 👍

[@ErlandStrendo]

Great video😊 I also had a non SAC clutch from Sachs original, but the new one I ordered is a Luk-SAC clutch. On my parts it looks like the new parts vs. old parts have some different meassurements; fingers on the diaphragm spring is sticking more far out from the pressure plate than the old one. Have you had any concerns with this? Or is it just the design that fools me, and the total distance from the crank to the fingers is the same as the old one? Is it common to change from non SAC to SAC clutch?

[@WMCS]

Do not fit it. It will not work. It has to be one or another. Either you fit a complete LUK Kit. Or a complete Sachs kit.

[@ErlandStrendo]

Thanks for your reply😀 The new parts is a Luk kit with clutch and DMF. And today i saw that the original Sachs clutch and DMF on my car looks to be a SAC clutch after all. I just didnt see it.( Different design than the Luk clutch). So things look the same as in your video. If its a Sachs kit replaced by a Luk kit? (My concerns where about the two kits looking so different).

[@ErlandStrendo]

With the new info, do you think the new complete Luk kit will fit?

[@martinjones849]

Yet another excellent job Kevin

[@wayneconnell631]

You are the freakin man Kev..🙌🏾🙌🏾🙌🏾💪🏿💪🏿💪🏿💪🏿

[@catalincata8993]

Hi, of cuorse you are the best,please i would like know what impact wrench do you use ....

[@abdelkrimmansour3952]

You are the master. Very good work . Thank you for your fantastic video. Bravo

[@WMCS]

Thanks for the great feedback and for supporting the channel. Very much appreciated

[@jemmace2586]

Great job KAW! how it's done and making the hard way (on a driveway with no lifts or compressor's) look easy, which it msot certainly isn't! Well not to us mere mortal's or the aspiring D.I.Y'er! :)

[@WMCS]

Jem that’s the reason I make the videos so the weekend but serious DIY’ers can have a good guide to tackling their own repairs.

[@oscarmontero5724]

Good work and clear space! I might say that VW is a bit boring. Some red rubber grease in the joining cup of the drivestaft to avoid leaking? I still wonder how you manage to change the hydraulic jack position to raise the engine... 600 luk points is about a bag of peanuts or something? 😄 It seems you changed the syringe and the pressurized brake cleaner. Thank you very much for the video!

[@WMCS]

600 points you get just the bag of nuts without the peanuts .. Yes a new syringe. New pressure bottle new jack yet to be used and some replacement tools .,, I believe in re investing in my work tools and equipment before they fail.. Swapping the jack to the gearbox I can’t show on video due to health and safety. .,, I hold the gearbox with one hand and swap the jack with the other hand ..,,

[@oscarmontero5724]

@@WMCS Man, that is awesome! Thank you very much for the classes on mechanics. I thingk that showing your job makes it more valuable. Specially for those who think these things are easy and take little time. Take care! Are you using a mail for PayPal support?

[@gicapacioianu3037]

Hi there when u wil came to roumania to fix my renault clio 1.5 dci i have a lot of work to do on her the shock absorbers front and behind the disc brakes and other small things ,things that other mechanics from here don't know how to do or do not wanted because they are lazy ,fat ones and their only preocupation is to get money to easy and not to work properly to peoples cars.i will watch u every time u post a video to learn something or to enjoy ur work,thank u sir.good day

[@WMCS]

Thanks for subscribing.., stay tuned ..

[@Britishfever456]

I have the same engine (bkd). How much will a sachs kit (flywheel, clutch and csc bearing) and labour cost me Kevin? Thanking you in advance.

[@WMCS]

Hi there. If you send over your details and I’ll put a quotation together for you. www.williamsmobileclutch.co.uk Regards. Kevin-Albert.

[@MOHAMEDHUSSEIN-pb2br]

You are brilliant & really Professional

[@WMCS]

Thank you Mohamed ✨✨

[@mariuba22]

what oil for clutch reservoir? same as brake fluid or do they share reservoir? going to do a singlemass flywheel swap on my BMP engine, anything i need to know?

[@MyloFresh87]

this dude is nothing without his milwaukee screw driver haha ... good work ^^

[@leenlou3562]

How you doing buddy,i remember the days i used to do this on my drive,getting a bit to close to 50 now to be bothered,but i got a 2007 passat tdi 1.9tdi 105bhp to good to scrap family owned since new. is sachs dual mass flywheel and clutch ok to fit or should i do something else.i wish you was in my area but your not cheers lee

[@WMCS]

Hey Lee., Personally I think they are both equally good. The only reason I alternate between the two is I tend to fit what is already in the car. So I replace like for like.

[@shaunfreeman3007]

Cool as always all the best Shaun

[@sudinebabz8651]

👍🏽👏 again the clutches warrior ! But how much does this thing weigh , the gearbox ???

[@WMCS]

This one was a big baby .,, I had to proper cradle it. Easy 70kg I’d say

[@sudinebabz8651]

@@WMCS Waou ! 💪bravo 👏👏👏

[@MrDzigibau1986]

Great job. Can you tell me if you can, how much cost all this for this car whit your work and parts? If you can, please. Thank you.

[@WMCS]

Hi iavan. Submit enquiry via : www.williamsmobileclutch.co.uk

[@dervincent1054]

KEVIN, the cover photo of your video :" 2005 Rover 75 1.8L Petrol Clutch Replacement" you look like Batman, black clothes and mask. Good job man

[@WMCS]

Thanks man .,, working outside directly underneath and in close contact with dirt .,, the correct PPE is a must ..,

[@markanthony6128]

This guy is a human clutch robot

[@WMCS]

I love it .,, life wouldn’t be the same otherwise 😁🍻🍻

[@gustavoromero3830]

👏👏muy bien. Con pocos recursos. Excelente trabajo

[@ivandrago1267]

You are an iron man ! How you can do this ? I changed my clutch on fiat grande punto following your videos, but when I tryed to lift the gearbox with my body like you .. I lost !! So after I used a pallet truck an some piece of wood to lift the gearbox and I finisched the work but ... it was a hard job ! Top Kevin, I like very much your videos !

[@WMCS]

Ivan they are a bit heavy some of the boxes. But for a fiat I’d say it’s not so bad. But glad you managed to use some initiative to get it back on. Well done to you ✨✨✨🍻✨🍻✨

[@matrix7725]

Wie viel kostet es? Der Preis für das Stück mit der gesamten Installation? Mein Auto muss gewechselt werden.

[@gregdelasavoie2105]

Hi...." The Clutchinator" how are you ?? Volkswagen hold no secrets for you...

[@WMCS]

🤩🤩🤩.,,, gregos ca vas .., Always nice to hear from you .,, no secrets with the VAG.,, nice and heavy 😆😄

[@gregdelasavoie2105]

@@WMCS thanks my friend 🤣🤣🤣🤣👍👍👍👍🍻🍻🍻🥳🥳