Kaon 4wd (Pajero) Stand alone rear shelf

[@rossdaws6042]

I reckon you could get a second shelf and mount it from the passenger seat handles, and just remove the front fence from the rear most one. With all the adjustability of how you position them, I reckon you'd be unlucky not to be able to get it all to line up. In fact now I'm thinking about mounting the fence on a hinge so you can lay it out flat to extend the rear unit, or lock it in place vertically if you want to take the front one out.... There's potential there! Thanks for the review, love seeing stuff for the Paj!

[@010Tracer]

Ordered one of the Kaon shelves today mate will give you a report on delivery here to UK ....would have never seen them if not for your channel !! take note Kaon!....cheers Mike.

[@DENMONKEY]

Yeah cheers Mike. It's be curious how it travels..fyi a good portion of aus is getting impacted by covid again as of these past few weeks. Fingers crossed she comes through nice and quick.

[@DENMONKEY]

Kaon IS in QLD Australia :)

[@kookmar7431]

Just ordered one for my pajero sport, its on the way to Mexico! Thanks for the review mate.

[@DENMONKEY]

Nice. Welcome and thanks for the watch

[@MicksGarageDarts]

Love the comments about people not doing things for the Pajero. I find there are a number of places that do Gen 4 but no older like the Gen 3. I know most things on the Gen 3 & 4 are about the same but its still a pain if there is a minor difference. As you said the Paj is everywhere. I noticed you were putting that handle on upside down at first, see you fixed it. Ive got some spares if you want one. Now for the actually topic comment lmfao. Actually do like them, They look great and would come in very handy for us tourers. As mentioned on FB I think I would know myself out sitting up in the back but if we catch up for a weekend trip Brett I wouldn't mind seeing just how much rom there is.

[@steveberg2685]

I've got the Kaon cargo barrier and this shelf is on my wish list. Your review just sealed the deal. Thanks Brett.

[@DENMONKEY]

Sounds like there are a few who have the cargo barriers. I didn't know they were so popular. Here I was thinking I was sharing a well kept secret. turns out, everyone already knew 😁

[@buster_1972]

It's great having you show all stuff for Pajero's. Love our NP Pajero. Out camping and 4wdriving now with my daughter at Wyperfeld Nat park. Keep up the great work 👍

[@DENMONKEY]

Cheers mate. Enjoy the outdoors for me. I'm working 😶

[@Naes755]

I got sick of waiting so made my own, makes a huge difference for packing and organisation of the back of the car especially when camping! Working on a MK2 now that I'm going to get laser cut

[@DENMONKEY]

gotta love a bit of DIY. Nothing like going through the progressions until you're happy with it. sometimes the making is better than the having and using.

[@MrDunk66]

I made a cargo net for my Pajero. Weighs nothing but best for soft items, not pie ovens! Been great. Good to see some made to fit accessories available for this car.

[@DENMONKEY]

I tried to make something like this from a trailer net, but when I stuck anything in it, it just hung too low and blocked my view. yeah, its about time alright

[@010Tracer]

Arrived by UPS JUST NOW 4 1/2 DAYS TO HERE IN UK! WELL IMPRESSED

[@DENMONKEY]

Holy shit. That's bloody good, especially in these times.

[@Handleyman]

What a great idea that shelf is! It’s an area that is usually wasted so it won’t be in the way at all. Excuse me while I head off to take a look at their site. Cheers.

[@DENMONKEY]

do what ya gotta do Dave. I think I took like less then 3 minutes from spotting it come up on the site to the time the money came out of my account :) I have been waiting for them though.

[@4x4touring47]

Kaon do some great gear! I recently installed one of their Prado 150 rear door tables in my 90 series Prado. Worked out absolutely awesome! Better than I thought it would. I took the door card off and replaced it with a sheet of 3mm ally and is made a perfect splashback!

[@DENMONKEY]

they certainly look like a nice clean unit alright. im almost sold on one but i spend sooooo much time making my own and its not even finished yet. as much as I like it, I like not to be the same as everyone else, so DIY allows me to have that.

[@mikewasowski1411]

Awesome!!!! I was waiting for something Paj related from Kaon. They do heaps of great stuff, just not heaps for Paj. Hopefully more to come. Great review Brett. Cool lights.

[@DENMONKEY]

Morning Mike. I've been watching for these for ages. All I need to do now, is use it.

[@DENMONKEY]

Reply from kayon re stock 'The next batch of non sunroof Pajero roof shelves will be ready mid next week. The sunroof version will be available in three weeks time. We are in the process of packing our first batch of the Pajero rear door tables that everyone has been waiting for.’. Fyi there is mention of a 10% off end of financial year sale. And. Pajero sport standalone shelf is on our product development road map.

[@muzzaball]

Hey Brett, another fine video, thanks very much. Your doggo is cool - he knew you were talking about him! Nice shelf, doesn't suit me as I have a Navara ute, but this is still the sort of content I enjoy. It will be good to see your oven mounted underneath - easy access and little chance of catching anything on fire. Look forward to seeing the light install/review next. Cheers mate.

[@VasVN]

Just ordered the rear table along with the chopping board the other day... Can't wait to get it. Also with the rear shelf, it will also fit the Gen 4 SWB, just no room for anyone sitting in the back seats when it's in.

[@DENMONKEY]

cheers Vasd, thanks for the sweet info on the SWB. I did not know this

[@guanghunglo3594]

Ordered one of these yesterday. Looking forward to receiving it!

[@DENMONKEY]

did you get it yet ?

[@guanghunglo3594]

@@DENMONKEY Yes, going to install it tomorrow. I'm about to watch your video again to see if I can get some installation tips. Pretty easy from memory, I'll get my son to help out (he's a mechanical fitter and a wizz on the tools). Should be a breeze. Just got back from a 4 day trip down south. Checked out some great camp sites! Paj went great. Got bogged on the track to Long Point (nothing that Max Trax and a bit of shoveling couldn't handle though). Just bottomed out on the wheel ruts and soft sand. I think the Paj needs a lift and some decent tyres. Cheers.

[@stevekeane831]

Great idea just ordered mine thank for the reveiw didnt even know they were available.

[@DENMONKEY]

No worries. You should have saved your money though and stopped at the free alarm video 😁

[@graememellor8319]

Kaon lightweight barrier and the shelf are great gear. Very well made, light weight & super easy to fit Great value for $$$

[@graememellor8319]

The lightweight barrier is also great and bolts onto those same sidewings hence the rivnuts. They need to be reversed ie rivnut to the front for the barrier fit

[@DENMONKEY]

Thanks Graeme , I figured that just be what they were for . I'm yet to hear any negative feedback about their gear. All seems to positive.

[@grahamclarke6211]

Looks like this will be on my wish list now. Just got the idoing unit delivered today

[@DENMONKEY]

its almost tax time. the government might pay for it for ya let me know if there's any updates on the idoing will you? curious if theyve made any changes

[@grahamclarke6211]

@@DENMONKEY looks like they have changed the plug on the back to several mult pin. With 300mm usb leads from them . Not sure what else they have changed. Also what app do you use for the obd? And yes tax time night help to, prob heading to new bcf at glendale tomorrow morning to see what deals they have too

[@nigelmaxwell5751]

Face it Brett, Titan is the 🌟. This shelf is a Boomer. Great Aussie product, I agree it is frustrating when you see something good only to find they do not have a Paj version. Keep up the good work.

[@DENMONKEY]

I know he is Nigel. Everyone tells me so. You get used to it as a pajero owner. Not as bad as it was when I owned a delica.

[@davidbarber5554]

Kaon make awesome products I have a few in my prado 120 now I have the rear stand alone shelf,rear door table,cutting board for rear table, front bash plate Best of all as you said Australian made

[@DENMONKEY]

You Prado guys get all the good stuff first

[@CheeseNoodleOZ]

Brett you bloody ripper buddy. I have been looking at the light cargo barrier for ages for the Paj. Then I saw the other day they now have the rear table and this shelf. Cake here looking for reviews and looky looky my ol mate Denmonkey has a review. Perfect. Interesting they say shelf is rated to 10KG. Their promo video on KZbin has his son (40kg) doing pull ups on it in back of the car lol.

[@DENMONKEY]

What up cheese. Mate I reckon they could handle more than 10 BUT the weak point I think is then using the plastic handle pieces to mount the shelf. If it was mounted direct, if say it would hold more. That said I'm finding you need to strap even light things in because it all rolls out the back when you accelerate.

[@CheeseNoodleOZ]

@@DENMONKEY I'm prob gonna buy it and the cargo barrier they do too, and the drop down table lol. Then I gotta sort out a floor/drawer system that can handle the 100L fridge and the Rottie and still allow me access to under the floor. And looking at an MCC triple loop bar for the front. Better find some money too haha.

[@JocksAway]

Another great review packed with great tips and ideas.

[@DENMONKEY]

Thanks j

[@mummaduck7054]

Fantastic video Brett, love seeing what you find and what you do with your rig, aannddd thank you for mentioning us Girls, am proud of my rig, nicked named "Dumbo" by my kids because of the Towing mirrors I have on it. Keep up the great work. Can't wait to see your next vid... Mumma 🦆

[@DENMONKEY]

Hey mumma d, how's the CB going .? 10 4 big rubber chicken . 😁 I'll keep em coming if you keep watching

[@karl4834]

These are back in stock at Kaon. Just ordered mine. Would have got the rear door drop down table had I been able get it in the same parcel as the rear shelf to save postage...which means if you get a discount code up on the table, I might be able to utilise that. Frankly, if it weren't for you I doubt many of us would have been aware that Kaon had these items on offer🤔

[@DENMONKEY]

Beauty, thanks heaps Karl for the update mate. I know there was a few people waiting for them. Much appreciated.

[@karl4834]

@@DENMONKEY No probs, Brett. Now pull your finger out and upload another vid 👍🤣

[@DENMONKEY]

Will do Karl

[@reececulver3606]

Friggen love it! Thanks again for more great content! Once I've got actual money in the bank, I'm getting one!

[@DENMONKEY]

Hey Reece,, thanks mate. I'm still waiting on Powerball to come through ,

[@thejollyhangman2703]

Yep.... sold...Buying next pay. If your giving them suggestions... ask them for an add on or a separate part that covers the two side rear windows. Then you can have molle panels on the top and both side.

[@DENMONKEY]

Ooh yeah. That would be a good idea. Can always use more places to store stuff😁

[@prado.offroad]

Fitted one of these to our Prado 120 a couple of weeks ago, these are awesome, all of our Kaon products we have are great quality, beats the gear out of Rago fabrication or orange box fab out of the US

[@DENMONKEY]

I do love it when Aussie stuff is good gear. makes me proud to see videos and stuff of guys in the US with it. even if its only ARB or something. we just need to make sure no kings stuff gets out of the county with our flag on it :)

[@prado.offroad]

@@DENMONKEY we get the kids to play "count the kings awnings" whenever we go to 4X4 show anywhere, usually attached to some bogans ford ranger than will never go offroad, just built the remote control compressor project you did, thanks for the great info

[@adamgreaves8173]

KAON is in Brisbane right near Alvey reels. I have 1 of their cargo barriers. Great item

[@DENMONKEY]

Thannks Ads. I'm guessing the barrier is pretty much made of the same material etc ?

[@adamgreaves8173]

@@DENMONKEY yeah mate. Made of the same stuff. I put up a pic in the Facebook Pajero group

[@DENMONKEY]

Sweet

[@bendudley3248]

I bought one for my 2017 Paj GLS. Awesome product, it fits perfectly. I didn't get the velcro Kaon patch though, only a sticker. Cost saving....................

[@DENMONKEY]

No patch? What a pisser. Mine is still stuck on my box where I put it in the video. Kinda forgot about it

[@bendudley3248]

@@DENMONKEY yeah never mind, not have item. I am going to grab a COMPANION Rover 70 Ah lithium battery box tomorrow. They seems pretty decent

[@narg87]

ahh geez I knew I shouldn't have watched your vid, now I have to put an order in for one lol. great work mate keep it up

[@DENMONKEY]

Sorry Ivor. I recommend you stop watching my videos to save money 😁

[@mattyP_7428]

Its Sunday morning and I have three Kaon products to install to the Paj - Rear Shelf, Cargo Barrier and rear door shelf (and an EVC throttle controller) will be interesting to see how the rear brackets for the shelf & cargo barrier go since they use the same mounting point on the rear grab handle....

[@DENMONKEY]

That's not a bad way to spend a Sunday I reckon. If it's anything like the shelf it should all go together pretty easy I think. That will give you get l extra time to go hooning after you get the controller in. They're easy too.

[@DENMONKEY]

What's the feedback on the controller? Loving it?

[@mattyP_7428]

@@DENMONKEY Yeah makes a difference - will only use the performance setting when towing the pop top. Looking forward to trying the economy setting off road to dumb down the throttle response for rock work etc - got a 2008 Disco 3 with Terrain response which is awesome and Im hoping to mimic it. Dont suppose you have or are going to review a DP Chip Vs Steinbauer ? thinking of one of these for the future - atm Im leaning towards DP Chip.

[@ozxplorer2258]

The rivnuts are for the half cargo barrier for those that still have kids and need the backseat. Very good option over other brands

[@DENMONKEY]

Thought so Jason, thanks . I did mention that but it got cut because I wasnt sure. seems I should have cut the bit about victoria too :)

[@ozxplorer2258]

@@DENMONKEY Sorry to be Capt obivous, just check the 2 side wings. Yes, us Qlder's get upset very easy :) but we still love the content. Oh yeah KAON is in Queensland :)

[@raymondnecke5806]

Great stuff , love seeing stuff available for our Paj's . Scored yourself a new sub 👍👍

[@DENMONKEY]

Cheers Ray. Welcome aboard mate

[@MudducksTouringAustralia]

I have been thinking of one of those for the 200. Cheers Steve

[@DENMONKEY]

have you got room ?

[@MudducksTouringAustralia]

@@DENMONKEY Yep

[@danielgraham602]

Great review, love it!!!! Can the nuts and bolts that attach the shelf the the bracket be reversed to have the thread of the bolt sticking out of the shelf so it doesn't catch on whatever you store in there

[@DENMONKEY]

Yeah absolutely

[@danielgraham602]

@@DENMONKEY cheers mate. Just thought maybe there was a reason you did it that way so It didn't hit the trim or something. Making them bolts a bit shorter would be an improvement kaon could make.

[@Somethingaboutsomething21]

i was hoping you would get hold of these, i just installed the cargo barrier in my paj. now just waiting for a shelf to come back in stock.

[@DENMONKEY]

I can't do the barrier because of the bed build in he back but how do you find it ? I know another mate who managed to get one of these too. must have been a limited number

[@Somethingaboutsomething21]

@@DENMONKEY literally only installed it today, but its great for our purpose. 2 kids carseats restricted us for a full barrier. only negative is that i wish it was higher and wider. but is perfect for us

[@4bnewb969]

You could do with one of those shelf’s in a larger size for your shed...lol Enjoyed the upload again👍 Cheers

[@DENMONKEY]

You know what, you're an ideas man. I could make that . im only 5'4 so there's a lot of wasted space above my head in that shed

[@guanghunglo3594]

Hey that shelf looks brilliant! I'm gunna get one of those!👍

[@DENMONKEY]

Its very handy Mr LO :)

[@karl4834]

Bit of info to follow up on Brett's informative video. If, like me, you have a GLX, the spot where you fix the Kaon bracket to the roof might just be blanks i.e they won't have the fasteners like Brett demonstrates here, so you will have to find some elsewhere. I haven't yet measured the size but know the thread is an unusual metric because I had nothing at home that matched it. If I had the right fasteners here I would have cut off the bit of the blank that inserts into the present thread and drilled it out to insert the fastener through it (probably adding a washer for extra clamping) as you will need the blank to help hold the Kaon bracket in, as you will observer in Brett's vid. Anyhow, as its hailing here and I have no suitable fasteners, I am too discouraged right now and have resigned myself to going around a few wreckers to find the factory bits I need.

[@DENMONKEY]

Cheers Karl.

[@karl4834]

@@DENMONKEY Got the bits I needed today, job done. Such a handy space 👍👍👍

[@DENMONKEY]

@@karl4834 let me know if your stuff rolls out the back

[@karl4834]

@@DENMONKEY Will do, but so far so good; however, there is nothing up there yet that really rolls, just soft and light things. Thinking of storing my solar blanket up there, too, but that might bring it up past it 10kg limit with the other crap there.

[@DENMONKEY]

That's exactly what I'm thinking of sticking up in mine. I purchased some sort occy straps though just for it.

[@bjp107]

Good review. I have a genuine cargo barrier - bed to try and work out if it will fit in front of it. I suspect it won’t.

[@allanpower8041]

Hi Brett Would love to see a vid on how to attach the travel oven and wire it to your 12 volt system.

[@DENMONKEY]

I'll do a vid when I get it mounted. Hopefully in the next week or 2. At this stage I'm just going to use the Anderson plug that I already have in place but I want to redo that area for wiring but that's on the list for later. Got a bit of other stuff that needs to happen first

[@geralddattar1489]

like the idea of the shelf. does it sit right uu against the cargo barrier ?

[@brentonmiddlemiss7873]

This is a great video as is all of the stuff you produce. One of the downsides of a Pajero has been the horn which is a toy. Are you able to recommend a replacement and if possible do an installation video? If you have already installed one in your vehicle could you maybe provide a brief demo on how you did it. It would be great if you could use the original wiring

[@MRCtouring]

That is cool, I’m guessing the rivnuts threads match screw in i-bolts

[@DENMONKEY]

They go into the cargo barrier I've been told

[@dmac201]

Whats the vision like looking out the rear window? Does the shelf block it much?

[@pallet2play596]

Bloody awesome Brett will definitely be getting one and a drop down table, also are you aware Emuwing are releasing an Emuwing for the Gen 4 very soon? Hey not sure you’ve realised yet but you put your rear grab handle on upside down😉 Cheers mate and thanks for the all the great vids👍🏻

[@DENMONKEY]

Ooh didn't know about the emuwing. Still suss out it. Yeah people have pointed out the handle being upside down 😁 I only needed it to hold the bracket in, so all good.

[@grunfgrunfic4366]

The rear grab handle (on left side which is attached just below roof) is folding up when in closed position. When you installed it back, you installed it in a wrong way, folding down when in a closed position.

[@Smash_Moore]

really great content as always. can you still see easily out the rear window while driving?

[@DENMONKEY]

Took her for a spin to check. Should have left that in the video. Yeah all good. You can see it but doesn't block your view. If you stick anything on bottom is definitely will

[@crazyduck1254]

where do we get the window coverings from?

[@mcduncanpresents9389]

Hey Brett, great video as always. Got me thinking of getting one myself... Just an off topic, since you have it in your video, why go the bigger Daly BMS? And where'd you get it through? Aliexpress?

[@livingjacqueline]

Thanks for showing the shelf installation! My handles are missing just two bolts exposed so don’t think the shelf will still attach? 🤔 Also where are your silver back window covers from?

[@DENMONKEY]

Welcome. The screens are from solarscreens Australia. I have a few reviews on them if you that helps. Very happy with them.

[@terrythompson-fs2wy]

Hi Denmonkey. Where did you get your quilted window inserts from?

[@DENMONKEY]

kzbin.info/www/bejne/fmHCZayVbr1_hZY. Solar screens Australia are the guys youre after

[@lancer1993]

Looks great, tried to order one but they are out of stock.

[@anthonyroelofs9640]

Great video Brett and love this shelf. Does anyone know if it will fit an NP Pajero? I asked Kaon and they could not say, only stating it is designed to fit the NX.

[@DENMONKEY]

Thanks Ant. Not sure on the NP query mate if they cant even tell ya. bit of a pisser

[@InTimeZone1993]

Hey. could you please tell me the dimensions of the shelf?

[@bouncingboxer]

@denmonkey I'd love to know the approx height and depth you get (so I can see what would fit in). Thank-you for this video.

[@nicko4785]

Do you happen to do bench tops for a living? If so I met you on the Glebe road job at Adamstown. I have the old 95 paj and was laying the floor at that job.

[@DENMONKEY]

Haha no mate I don't. Just be my twin

[@LogitechXibanga]

@DENMONKEY theres an option to ignore your comments and limit the comments 1 for each user, theres options there, i reccomend checking it out before you start to use it, if you still have doubts on it please check youtube video tutorials on giveaway programs, im sure theres plenty of videos, also sorry for my grammar i try my best to communicate. Thank you.

[@DENMONKEY]

I'm going to use the same one I used last time. It worked well. I'll have to find it again though. It was a long time ago. That one didn't have that option but it would be handy if I could find one that does. I'll do some checking before it's time to do the draw.

[@lesneilson5632]

never thought about one of these hmm will have a long think and by the way are you still happy with your Idoing and does the nav maps do the job for you thank Les

[@DENMONKEY]

yeah Les, still happy with the idoing. Because its chinese android, it doesnt get the android updates so Im wondering if Im missing out there. as for maps. Onroad I use waze and off road I use locus maps. it also has the normal google maps on it that you can use too. the world is your oyster from that perspective. anything you can put on a tablet you can put on that.

[@df5118]

Do you plan on doing any fishing videos out of the boat?

[@DENMONKEY]

definitely not. Im a shit fishermen

[@df5118]

@@DENMONKEY 😂😂

[@lesneilson5632]

Well I just bought one, so how is yours going can you still see reverse mirror wise did you need to adjust it at all Onya Brett

[@DENMONKEY]

Hey Les, yeah mate can still see out back. I was going to hang stuff under it but that will certailny be in the way . I am still going to put the road chef under it but seems its not a straight fit like i thought. need to drill some holes. I'll stick it on the drivers side and it shouldn't pose any issues visually.

[@tgfcujhb7583]

Anybody notice the grab handle is upsidedown 🤔😂🍻👍👍

[@DENMONKEY]

haha, yeah it was :) . i didn't even realize till you just mentioned it.

[@alwynvanderlinde9507]

Any idea if this will fit the SWB?? nx

[@DENMONKEY]

Sorry Al, No idea

[@andrewhowells3522]

Could always extend the brackets and lower it another inch to mount the oven inside the rack. On another note, any chance your able to tell me the measurement from the floor to the rack?

[@DENMONKEY]

Hey Andrew, Yeah could do that but since driving with it in, I don't think I would want it any lower. You can see it in your rear view but it doesn't obstruct it. Any lower and it definitely would. Give me 2 shake and I'll go measure

[@DENMONKEY]

87cm

[@andrewhowells3522]

@@DENMONKEY your a genuine legend. cheers

[@sydneymowerandautomotivece4319]

If you want a full length, can you use 2, 1 in the rear and 1 in the middle section and only put the end on the front 1 ?

[@DENMONKEY]

I don't know. They suggested getting 2 to try that .I don't know what I've done with my other grab handles though

[@sydneymowerandautomotivece4319]

@@DENMONKEY big washer and new screws, easy bypass.

[@DENMONKEY]

It's a fair gap. I'd like need to stack washers. Or just make a square one from aluminium strip or something

[@sydneymowerandautomotivece4319]

@@DENMONKEY which is easier, making the alloy or looking in the shed ?

[@DENMONKEY]

Got that right . Could always get some from a wreckers

[@iankindervater8008]

How can you fit cargo barrier?

[@DENMONKEY]

I believe the cargo barrier is designed to fit with these in place. I've removed my test seats and have the bed build in the back so can't fit a cargo barrier in mine

[@theinsanekidxx9664]

Do they do them for a pajero sport looks good 👍 🍻

[@DENMONKEY]

cargo barrier and bash plates only so far it seems

[@morphshag]

Yeah I like that. I’ll show my patents too. They have a paj.

[@DENMONKEY]

cheers JPP

[@troy3312]

Instead of one long one could you fit 2?

[@DENMONKEY]

That was what they suggested. But I'll see how one goes first before I order another and try it.

[@phatmax90]

IV got a mk2 pajero and would love for the door not to shut when on a slight slope.. Instead of turning round every time..

[@DENMONKEY]

Don't theyn have a lock under the door to stop it doing that?

[@benc7102]

Great review Cheers

[@DENMONKEY]

thanks Benny

[@benc7102]

@@DENMONKEY Question You mentioned brackets for fog lights What brackets were they Cheers

[@LogitechXibanga]

wouldent it be better to just use a nut and a washer instead puting that grabhandle bar there? It would also be nice for you if you could find a storage thingy mabob that went full lenght of the back of the car that would slide on rails so you could pull it out and reach the items in further part of the storage, Hopefully you understand what i mean. :)

[@DENMONKEY]

Yeah I get and that would be bloody perfect. Just slide it in and lock it somehow. That would be tops.

[@yindyamarra]

That shelf is a bloody ripper

[@DENMONKEY]

Shit yes it is 😁

[@craigvk2paw17]

Try getting stuff for Mahindra Plenty in South Africa none here

[@DENMONKEY]

Haha

[@Khaled.sa84]

I want to buy

[@NeoXTC]

Kaon is in Qld :)

[@DENMONKEY]

I did say I wasn't sure :) but yes you are right

[@darrenbryans8288]

Looks like a great product, shame it can’t carry more than 10kgs I would have loved to slide a flat water tank on it for gravity fed showers

[@DENMONKEY]

Apparently theres a video of some kids hanging off it on their website. so ive been told. havent seen it for myself. But it says 10kgs in the manual. that would be a bloody outstanding use for it. I guess you could get a flat 10L up there

[@karl4834]

Far out, I stopped cooking tea as soon as I saw this video (anyone who knows me knows not to get between me and food 🐷) and went to Kaon page to order one....but they're sold out already 😥

[@DENMONKEY]

Hey Karl, what was on the menu ? Ben mentioned he missed out too. If they let me know when theyre back in stock, I'll post something up

[@karl4834]

@@DENMONKEY lamb cutlets. Cheers, Brett, for heads-up👍

[@TheFained]

that discount code will get em a sale from me

[@DENMONKEY]

I'm working on it . they do have an end of financial year sale coming up it seems. so if I can't work something out for everyone, that might save ya a few bucks . no idea what the sale involves though.

[@grahamefellows8030]

Mate Kaon is in Brisbane not Victoria

[@DENMONKEY]

I did say I wasn't sure :) but yes you are right

[@adamsankey8702]

Let’s just say I was extremely interested until I found out the don’t make them for my nm Pajero. Very disappointed ☹️

[@adriandean2900]

They do now, bought one for my np a couple of weeks ago

[@adamsankey8702]

@@adriandean2900 yeah I did end up emailing them and they did say that it was about to be released but I decided to make my own version

[@mini696]

Not a fan of Kaon gear. Their customer service leaves a lot on the table. Typical small Aussie business. Too focussed on making the cash to spend a little on service.

[@DENMONKEY]

can't say I've had that experience with them. this turned up in 2 days and they were responding to my facebook questions real quick. I didn't mention the youtube thing either at the start. so it wasnt because of that. Havent had to speak on the phone or anything but so far, theyve been good for me .

[@mini696]

@@DENMONKEY Hopefully it was a bad day for them. We all have those. Their gear is legit though.