Stamp Carving Tutorial for Beginners

[@aprilezell3784]

Thank you for showing how to put the blade in the handle. You are the only person I have seen demonstrate that and I'm embarrassed because I had a hard time with it before!

[@Karagami]

April Ezell I'm glad it helped! I sure did need some help when I was starting out too ☺️

[@theantonbomb]

you just keep the parts in. you can just slightly unscrew the top and just slide the cutters in and out. re-tighten. :)

[@luxiolooma]

I was thinking the same thing and cringing so hard when she took it all apart.

[@amandathompson4692]

Thanks for sharing. I bought some supplies to stamp designs for etching metal jewelry, but was intimidated to use them. Now I'm more motivated.

[@Karagami]

amanda thompson oh yay! i'm so happy to hear that ☺️ I'll make more carving videos 💕

[@castleincorporated]

Thank you for teaching me how to cut stamps! I'm so excited to carve my first one

[@synthetic240]

Thank you! Yours was the first result that wasn't a bunch of techbros with laser cutters.

[@AnthonyMonaghan]

Thank you. Excellent tutorial. Happy stamping...

[@nadiazayman779]

Thanks for sharing your skills. I plan to use these for polymer clay, both to imprint textures, and to print patterns on the raw clay. Can't wait to try it!

[@nafl350]

I'm so glad you showed some of the carving in real-time! I've been seeing all these sped up videos so I was carving fast but now I know it's normal to go slowwwww.. Any suggestions for carving detailed/tight areas- should I not apply too much pressure?

[@Karagami]

Thank you, Lisa! Check out my latest video--the topic is mental health but I carve a detailed ruler. You can see how I do it :) Hope it helps!

[@nafl350]

@@Karagami thanks, I was wondering about a craft knife -wasn't sure about how to "scoop" out the inner pockets. Hopefully your technique will also work on the Speedball rubber!

[@j-verified7577]

Wow!!! You replied so fast..... Appreciateable......it shows that you are the best and really respect your subscribers👍👍👍👍

[@patriciadistefano7467]

Very helpful! Love your stamps. Thanks for sharing.

[@Rita-yw2tn]

I’ve never tried this but I want to so bad ! You’re excellent at this great job !

[@pammipayne3334]

Thanks for the tutorial, I am about to do my 1st stamp carving.

[@sarazorel]

i used baking paper before coz I didnt have transfer paper. :)

[@Karagami]

You can or parchment paper, also works! :D

[@rosethorne9076]

@Sahaj Saxena fools?

[@lindawitherspoon446]

Great video. I’m so inspired.

[@MysteryMycology]

I hope you are still printing! Nice video.

[@jpopbest]

hi there! i know this video is quite a few years old now.. but i was wondering what type of transfer paper that is? i use carbon which makes a mess! i tried looking around for it but it hasn't turned up. thanks so much!

[@j-verified7577]

Wonderful 😁😁😁😁 work.... Actually I also started this but I got bored and stopped it but after watching you... I again got the inspiration....... Thank you very much

[@Karagami]

Sanju Prajapati yay so glad you're back into it! ☺️

[@alexthefox1175]

Your good at it

[@lospenguin5208]

great job 💙🦅

[@cherylburkitt9722]

Great job.they turned out nice

[@susanb760]

Great video!!

[@Lucky4193]

How did you cut it down to size? Scissors? Exacto knife

[@dreicornelio22]

I now have a new hobby cuz of you

[@Monnis3]

This was so lovely! Thank you:)

[@sirvalhart7464]

thank you!! you just carried my butt through my screen printing class

[@dreamkiss4u]

whats the rubber square material that you used ? or what kind of plastic is that and where can i get that?

[@Karagami]

dreamkiss4u all items are in the description box :)

[@dreamkiss4u]

Karagami oh I didn't know it was a eraser that's why hehe I thought it was something else special or something.

[@cookievf]

dreamkiss4u The eraser is to use if any mistakes with the pencil. "Speedycarve" is the pink stuff! You can also carve erasers!

[@lindawitherspoon446]

Fantastic. Love it.

[@Giacomomullova]

You are amazing!!!!! Thank you so so so much for this video!!!

[@Itz_DC]

I done this in art class and it’s very fun and easy

[@ananyaakap]

Hey, what a lovely video. Just stumbled upon your channel. I wanted to ask- is there a way to recycle/reuse the tiny pieces of waste rubber? Can I melt them and remould them into a new rubber block?

[@sueallen952]

NO

[@X37adventures]

I am a stamp carver & a plastics recycling artist. Unfortunately, I have yet to find recyclable stamp carving material. I even contacted Speedball asking the question & they said no too. 😞

[@rahulsehrawat1798]

can you share me link from where i can purchase all these things

[@bibhutiframing650]

Hey didi very happy your video i.am like it 😀😁ok

[@mmandpt64]

What did you use to cut your block down to smaller blocks?

[@MsJespa]

Yes, I’d like to know that too

[@Lucky4193]

Me too

[@whoscountingthesheeps4266]

It's satisfying! 😍😍

[@Karagami]

yay! 😊

[@anapaulacosta2054]

what is the name of the plate on which the drawing is decaled? Thanks

[@keepyourshoesathedoor]

Thank you so much. 👏

[@bellaNwonderlnd]

What kind of transfer paper is normally used? Like the kind used on shirts?

[@daphne4407]

No definitely not. Its stuff that's got charcoal on the back so drawing on the front leaves marks on whatever is behind

[@canfunfawip4682]

Great job! And thanks! What is the name of the pencil you use for do the tranfer?? And where you buy it... if possible! Thanks!!!

[@canfunfawip4682]

Bone folder!! Never mind !! Thanks!! 🙏🏻🙏🏻🙏🏻

[@izzyroof6541]

Is it possible at all to recycle the linoleum?

[@tzaphkielmelekiyah1518]

Link the amazon they’ll give you a kickback and it’s easier for us

[@ibkristykat]

PS lovely images. what kind of flower did you say that was called? they stamped so cleanly. :) TFS

[@Karagami]

it's hibiscus/gumamela 🌺 😊

[@k.a.i._7745]

where to buy speedball here in manila? thanks! nice vid!! 👌👌😊

[@Karagami]

K.A.I. _ you can grab them from Deovir :)

[@ronj5714]

you are good! Thx.

[@asdsyria9434]

What is the name of this paper?

[@SirCharles12357]

What do you call that green measured board you are working on? Great video btw!

[@Karagami]

Charles Brown It's a cutting mat in itsy coaster size 😉

[@zidelmelabdelkader4560]

Awesome

[@luxiolooma]

I've always just unscrewed the tool a bit and slid the nib in to put it together. It's much more convenient than unscrewing the whole thing... It just seems like this whole video is just taking the long way around everything. Some of the things are completely unnecessary. You do not need to use the same piece of tracing paper to draw each piece on. You do not need to trace the shape of the rubber bit. It just causes more of a headache.

[@Karagami]

Thank you for taking the time watch the video 😊 I will be updating this one in the future, I really appreciate the feedback ❤

[@accounthacker1655]

How much does it cost?

[@tatyssg]

Hola! Alguien que hable español, ¿podría decirme cómo se llama esa goma?

[@ladydede88]

I want to try

[@painchaud2000]

Nice!!!

[@luqmanhafeez55]

Thank you for this tutorial

[@ranadobedny1937]

plese,cut the windows for mini house ♥

[@celinabesson5173]

Nice video, don’t cut towards yourself it’s really dangerous

[@yanavekshyna7922]

that’s not how you change the tip. I did it the way you showed, and now it’s stuck 😞

[@meowmeow3532]

How do you do it then?

[@yanavekshyna7922]

Meow Meow I figured this way is much easier and minimizes the risk of stucking kzbin.info/www/bejne/bIfXi6uJnM2sfaM

[@meowmeow3532]

@@yanavekshyna7922 Tysm

[@TheLightsOfGeomancy]

❤

[@venusurbina666]

Wow end pattern can almost be a mandala If you continued

[@darrianchasteen8020]

Its a gauge ... The tool

[@A.M.Independent.Consultant]

Thnx

[@ibraheemtalash5094]

I'm in love with your voice. Tell me you don't see a guy

[@shashiprasad4446]

😍👌

[@internalinjectiontrulyhere770]

I'm acting simple

[@keithhopewell340]

stop the mad popping noises pls...arghh

[@Karagami]

keith hopewell i did! check out my newer vids :)

[@hitonot822]

I struggle a little with the popping noises because I’ve had a stroke sorry I hate writing horrible things. Your voice is so soothing very nice voice. I struggle listening to voices and usually have to go to subtitles but not with you because you have a lovely soft voice. Fantastic video x

[@janicet917]

Carver me some?