KARCHER FC5 - No liquid flows ? Repair Cleaning Nozzle/Hose

[@mareksadkowski4739]

Incredibly helpful guide 👍

[@petermeadfoot]

Thank you very much, I can now clean my floors again without having to pay for expensive repairs.

[@fixfinito]

No Problem :)

[@ivaylokosev8230]

Great explanation! Thank you mate!

[@fixfinito]

Np ;)

[@ramonaneamtu6620]

thanks a lot! 😀

[@fixfinito]

Np :)

[@Laci017]

You just helped to fix my machinery :)

[@fixfinito]

Nice to hear it :P

[@patrycjastecyk7329]

Thank you! Now problem solved! 🎉

[@pietras321]

Me too

[@MrNehygienix]

Thank you. In my case, it was clogged nozzle on that water hose. A needle helped.

[@fixfinito]

Nice too hear it :)

[@pietras321]

No problem

[@kakashi1150]

very helpful, thanks for helping out!

[@fixfinito]

np :)

[@lahoof]

I can't find what's shown at 10 second in anywhere on my FC5. Can anyone help me out.?

[@fixfinito]

You need take out cover there

[@lahoof]

@@fixfinito Which cover.?

[@Taurmin]

@@lahoof Whats shown at 0:10 is the top of the cleaning head. The quick release cover has been removed, and so has the grey button that you depress to remove it. If you are only trying to clean out the water hose, forget about any instructions to remove screws it is completely unescesarry. What you need to do is: remove the top cover of the cleaning head, remove the part that sits around the release button and has the connection for the vacuum hoses on the cleaning head side ( should just pull loose with a bit of force), pry off the release button, remove the cowling just above the cleaning head as shown at 0:18. This should give you unubstructed access to the full length of the water hose and all the parts simply click back into place afterwards. No tools needed except perhaps a flathead screwdriver as a pry bar.

[@lahoof]

@@Taurmin Thank you so much for taking the time to reply with so much detail. I will try again based on your suggestions and will report back.

[@MyloFlappie]

Ik heb ook de FC5 witte Karcher, maar geeft geen water meer door. Alles na gekeken, terug geplaatst, lekt hij water. Weer uit elkaar gehaald, terug gezet. Gebeurd niks, geen druppel water komt eruit. Slangetje misschien de oorzaak?

[@fixfinito]

Ok

[@monikaaszewicz7855]

Great video! 💪

[@Clevergirl-00]

I feel like there are missing diassembly steps.

[@gaspardsaintolive325]

What type of screwdriver did you use? I dont seem to have the right size.

[@fixfinito]

Just normal cross, im not shure what size was it

[@m4ni3x]

Thx 4 help. nice job :)

[@Taurmin]

What was the point of removing the 2 screws and removing the cover above the dirty water tank? It doesnt seem like you ever need it for access and the "top 2 screws" you replace later in the video are not the same as the ones you removed earlier. It actually seems like removing any screws at all is unnecessary as the only things in the way of you getting to the hose are the two plastic covers that you pry loose...

[@fixfinito]

Ye ouu yee

[@MrKrusas]

So useless disassemble video. Without big picture ant to fast

[@jozsefmihaly9381]

Még egy ilyen mocsok termék, ilyen drágán....nincs is tán!!!

[@fixfinito]

No

[@bitcoinik9171]

great :)

[@minetuncer6830]

This is not for an ordinary housewife. The machine is very heavy to use already and things like fixing hoses, failures, uh no not for me.

[@fixfinito]

Thats true

[@fridolinoberboersch9425]

The construction is a fail

[@fixfinito]

Do you know somethink better in the same money?

[@fridolinoberboersch9425]

@@fixfinito Yes

[@MegaChickenPunch]

Then give us the model you genius....... ​@@fridolinoberboersch9425