How to implement Barrel shifter using 2:1 mux's and 4:1 mux's ? Explained with example rotate right

[@afshanaminkhan8162]

This was a beautiful explanation, I saw it more than once at first to get things clearly but once I got it 16 bit was so easy.. ThankUU!!!

[@KarthikVippala]

Namaskaram AFSHAN 🙏, thank you , good luck, great health 👍😊

[@ApoteoseComuna]

Great explanation, thanks for your video!

[@KarthikVippala]

Your welcome☺

[@lordmax8729]

Nice and clean explanation. Thank You !

[@KarthikVippala]

Your welcome🙏

[@mohamedeljahmi2454]

Thank you so much. I will listen to it more to gain a better understanding.

[@KarthikVippala]

Namaste Mohamed Eljahmi🙏 , thanks for support and taking time to re-watch , good luck & great health 👍😊

[@mohamedeljahmi2454]

@@KarthikVippala Thank you. I watched it today multiple times and I feel grateful for your illustration. As you started from the basic concept and ended at two selections for MUX for 4 bits output. Could you help me visualize how to use the 4-bit configuration in a modular way to produce 16-bit output? I understand we need to use 4-bits as select lines, but the MUXs have only 2 bits select lines, how could we possibly make correct mapping?

[@kamleshverma-s2w]

awesome explanation❤

[@KarthikVippala]

Thank you so much

[@Shrawankumar-oc2vj]

Great Explanation

[@KarthikVippala]

Thank you🙏

[@AmadeColenbrander]

What would change in rotate left?

[@barlowy]

Awesome! Thank you for you work, keep going

[@KarthikVippala]

Namaste Barlowe🙏, glad you liked it, good luck & great health 👍😊

[@stuki0699]

Nice Vid! Greetings from Germany

[@KarthikVippala]

Thanks stuki06 , hope you are doing great , good luck 👍

[@scotteon1]

Good explanation. Thank you.

[@KarthikVippala]

Thanks for the feedback .👍

[@manuradha955]

Can u upload some more tricky questions like this and also i m very appreciate to dual priority encoder .

[@KarthikVippala]

Hey anuradha , thanks for the support , I will do them but it requires some time. Thank you so much , good luck👍

[@manuradha955]

@@KarthikVippala its OK.u can do it later .atleast can you say what topics are u going to upload.topic should be entirely different from other KZbin channels.tq.jai barath

[@KarthikVippala]

Yup I will let you know whe I do them 👍

[@manuradha955]

Can't u say topics😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠

[@manuradha955]

Reply

[@hemantkumar-ri5to]

Very good content !!!!!!!!!!!!!!!!!

[@KarthikVippala]

Namaskaram Hemant _/\_ , good luck & good health:)

[@chenamonivenkataiah5354]

Hi sir I m suresh.can u clear my doubt. If counter has 10 flip flops . counter is initially set zero ,then after 2078 clock pulses what might be the decimal number that counts??

[@KarthikVippala]

Hey sharath , please stop spamming with other accounts , I will not respond back if you do this kind off activity

[@KarthikVippala]

Hey thanks for asking the question , If 10 flops are there then we can count till 1023 , that me after 1023 we will get 0 again at 1024 this will repeat so at 2048 we will get 0 2049 = 1 So we Keep on doing it we will get 30 at 2078 hope this clears your doubt.

[@kishan.murthy]

How to perform 16bit circular rotations using multiplexers, code in verilog?

[@KarthikVippala]

Hey thanks for asking, it's similar to barrel shifter shown in the video we need to add few more logic blocks . I don't have the code , but I can help you ,if you are stuck, good luck, good health 👍😊

[@lilyrawat245]

@@KarthikVippala but how exactly can we implement this using mux in code?

[@Jawu523]

is it m log 2^m?

[@boraaltinok9876]

THANK YOU MAN !!!!!!

[@KarthikVippala]

Namaskaram 🙏 Bora, good luck, great health 👍😊

[@VEMURIKIRANKUMARREDDYBEC]

hi sir, this is kiran. could you please explain the procedure for rotate left operation for the same example.

[@KarthikVippala]

I can help you ,if you have questions ,but I can't make a video on it . Good luck, good health 👍😊

[@VEMURIKIRANKUMARREDDYBEC]

@@KarthikVippala yeah. Thank you for the response. can you send me the schematic diagram for barrel shifter for rotate left using any type i mean cmos or transmission gate any type of simulation diagram

[@AmadeColenbrander]

@@KarthikVippala what would be different if it were to rotate left

[@aviroxi]

thank you i have exam tomorrow

[@KarthikVippala]

All the best 👍,hope you do great in your exam 🙏

[@nikhilankam3049]

Can you give me the vhdl code for this?

[@KarthikVippala]

I can help you with your doubts while coding , but can't give it . Good luck, good health 👍

[@Cherub-vl9bc]

Its bits not beds

[@KarthikVippala]

Thanks for correcting!🙏

[@chitranjali9108]

nice sir but pls dont use fake accent it is very disturbing

[@KarthikVippala]

Thanks for feedback, improving on it🙏

[@akankshapatil4498]

You are an INDIAN but still using false accent?

[@KarthikVippala]

Namaskaram 🙏 Akanksha, I am trying to change it and improving on it , thanks for the suggestion, good luck & great health 👍😊

[@pavanireddy9719]

@@KarthikVippala telugu na meeru 😊by seeing your name I guess

[@KarthikVippala]

Namaskaram🙏 pavani avunu andi

[@devgandhi1917]

Bakwass accent

[@KarthikVippala]

Improving on it dev 👍