Multiplexer Explained | Implementation of Boolean function using Multiplexer

In this video, what is a multiplexer, the logic circuit of the multiplexer, and how to implement the Boolean Function using the multiplexer are explained in detail.
The following topics are covered in the video:
0:00 What is Multiplexer?
3:10 The logic circuit of 2 to 1 multiplexer and 4 to 1 Multiplexer
6:12 8 to 1 Multiplexer using 4 to 1 Multiplexer (and 2 to 1 MUX)
8:51 8 to 1 Multiplexer using 2 to 1 Multiplexers
11:58 16 to 1 Multiplexer using 4 to 1 Multiplexers
12:43 Boolean Function Implementation using Multiplexer
For more videos related to Digital Electronics, check this playlist:
bit.ly/31gBwMa
What is Multiplexer?
The Multiplexer is the combinational circuit that has M inputs, 1 output, and N selection lines. And using the selection lines, any one of the inputs is connected to the output. The multiplexer is often referred as MUX during the block diagram representation.
If the multiplexer has M inputs then the total number of selection lines are log 2 (M).
Or if the multiplexer has N selection lines then the total number of inputs are 2 ^N.
Depending on the number of inputs and selection lines, there are different types of multiplexers, e.g 2 x 1 MUX, 4 x 1 MUX, 16 x 1 MUX, etc.
Large Multiplexer using Small Multiplexer:
As the number of inputs to the multiplexer increase, the required number of AND/ OR gates also increases. And hence the cost and the complexity of the design also increase. So, typically the large multiplexer is designed using the small multiplexers.
In this video, the design of 8 x 1 MUX using 4 x 1 MUX and 2 x 1 MUX is explained.
Boolean Function Implementation using Multiplexer:
The multiplexer can be used to implement different Boolean Functions.
In this video, two different methods for Boolean Function Implementation are shown using examples.
This video will be helpful to all the students of science and engineering in understanding what is multiplexer and how to implement Boolean functions using the Multiplexer.
#ALLABOUTELECTRONICS
#Multiplexer
#DigitalElectronics
Support the channel through a membership program:
/ @allaboutelectronics
--------------------------------------------------------------------------------------------------
Follow my second channel:
/ @allaboutelectronics-quiz
Follow me on Facebook:
/ allaboutelecronics
Follow me on Instagram:
/ all_about.electronics
--------------------------------------------------------------------------------------------------
Music Credit: www.bensound.com

[@ALLABOUTELECTRONICS]

For more videos related to Digital Electronics, check this playlist: bit.ly/31gBwMa

[@qwertyztrewq4190]

Thank you for explaining so elaborately along with examples and clean circuit diagrams!

[@hey__AJ]

You know what this is the best video to cover multiplexer from the syallabus such a amazing skills of teaching and material thank you so much for relaxing my mind by such easy explanation 🙏🙏🙏🙏🙏

[@optimistprime21]

Such an enlightening video… Thanks so much!

[@arnab94mallick]

Another level of explanation, excellent and touches all aspects of the topic.

[@poojashah6183]

Explanation is awesome👌🏻👌🏻

[@kunjalvara6113]

Your way of explaination is very nice

[@mjoh090]

Excellent explanation! Thank you.

[@user-ri8rv7sp5o]

Thanks a lot! Your material is so good that I can learn from it even though I am studying in a US university! Keep making such good content!

[@r.prabhakaraarjun6796]

Thx for the beautiful explanation sir.....the concept was made crystal clear...

[@AJ-et3vf]

awesome video! Thank you!

[@krrishkumar5417]

amazing work brother....god bless you

[@khoicanduc7601]

interesting. you make things become easy. Thank you for saving me a life

[@simranrawat1284]

This channel is gem💎.

[@zen_139]

Thank You so much for the great content :)

[@dhirajkumarsharma4808]

Amazing explanation

[@EnockMulundu]

This good,iam from Zambia

[@b.mardonov]

thanks bro you saved our lives

[@shilpapatel793]

Very nice 👌👌👌👌

[@princesoni7241]

Sir please do you your background fully dark . Because it helps viewers to see for long time and will not cause stress on eyes .

[@gameplay-ld6ch]

Thank you a lot 🙏

[@mayurshah9131]

JUST SUPERB

[@Barman1904]

Loved it ❤❤❤❤

[@shihabkhan7183]

Thank you so much

[@Cm-zc2zx]

Thank you so muchh sir ❤️❤️❤️❤️🤞

[@PriyanjaliMishra-bx4kz]

Thank you!!

[@bikashprasad1317]

Thanku sir . Very helpful❤

[@Lack_Of_Enemies]

I wish you taught ECE in my college

[@mohamed__swidan]

You are amazing

[@wyatteyler6508]

Thanx you!!!!!!!!!!!!🥰🥰❤❤❤❤❤❤❤❤❤

[@arielvaldman]

much appreciated! thank you brother!

[@noureddine1687]

thank you thank you thank you

[@EasyEnglishkhalidmohammed]

dle te bxom you are the best

[@shantolegendyt]

very nice

[@kingofkingss]

Can you post videos for such as tttl totempole and ecl and all those

[@extramail1775]

Sir apko naman 🙏🏻🙏🏻

[@rammohankola1380]

12:43 can we use encircle method for solving

[@syedzameerbashas4217]

Upload videos on Demux,encoder ,decoder

[@ShivanshRanjan-ty4mq]

Thank you so much!!!! Edit: Thank you for all the likes

[@sabbirhossan3499]

Bro there is only 2 likes

[@ShivanshRanjan-ty4mq]

@@sabbirhossan3499 no only one

[@Arya-lj9hp]

No its 3 now

[@sapir3xl497]

Mantap nee

[@christiancomire1138]

how do you do the last example, if the selectors are BCD, cause it would be different right?

[@ALLABOUTELECTRONICS]

Yes, it is different. Of course, you can make a table and find the relevant inputs. But it won't be convenient. Because, now your minterms in the table are not in a sequence. For example, for BCD = 0, you are grouping minterm m0 and m8. Likewise, for BCD = 001, in the table, two minterms will be m1 and m9. So, of course, you can make such groups, and find the value of each pin in terms of variable A. But it won't be a straight forward. I hope, it will clear your doubt.

[@islemkerbouche9939]

i didn't understande how did u complete the truth table of MUX 2x1 pls anyhelp guys??

[@syedzameerbashas4217]

ADC,DAC videos also needed

[@ALLABOUTELECTRONICS]

There is a seperate playlist on ADC and DAC. Here is the link : kzbin.info/aero/PLwjK_iyK4LLCnW-df-_53d-6yYrGb9zZc

[@arkodasgupta0412]

is it compulsary to starting numbering the selection lines S0, S1, S2.. from right to left ?

[@ALLABOUTELECTRONICS]

No it is not compulsory. But when you have multiple lines, and when you write the truth table for the selection inputs then S2 represents the MSB, an S0 represents the LSB. So, naturally when we label these lines in the multiplexer diagram, then we used to represent them in the same order.

[@arkodasgupta0412]

@@ALLABOUTELECTRONICS ok sir understood thank you

[@rithiksaviog21ec18]

are data lines and selection lines the same thing?

[@ALLABOUTELECTRONICS]

Data lines are the input lines, where we apply the input. Selection lines, select the specific input. And that input appears at the output. For example, in 4 *1 MUX, if selection inputs are 00, then first input will appear at the output. I hope, it will clear your doubt.

[@rithiksaviog21ec18]

@@ALLABOUTELECTRONICS Yes sir Clearly understood thank you.

[@zaibi012]

1.If possible explain how the output F came in last two tables.

[@ALLABOUTELECTRONICS]

I think, you are talking about the implementation of Boolean function using the multiplexer. In that, we have assumed that we have some function F, which is 1 for the specific input combination. And the corresponding truth table is represented. Here function arbitrarily chose.

[@isharajput9991]

Sir how can we find the value of F in table

[@ALLABOUTELECTRONICS]

Typically, while solving such questions, the Boolean expression of the function F will be given. And from the Boolean expression, you will get to know that, for what minterms, the function F is equal to 1.

[@indianparthiv523]

13:11 daggara unna

[@kuchv6564]

1456 input then what select line

[@palashbanerjee4903]

For min term 1,4,5,6. The select lines will remain A,B and C but the inputs will change. D1 D4 D5 and D6 will be 1 while D0 D2 D3 D7 will be 0

[@isharajput9991]

​@@palashbanerjee4903 how can we find the output (.F)

[@dattdude6077]

I couldn’t understand a word he said 🤷‍♂️

[@arkodasgupta0412]

then either you don't know english or you are dumb

[@mayurshah9131]

JUST SUPERB