Die Cutting Tips & Tricks for Beginners

  Рет қаралды 16,134

CuriouslyAbigail

CuriouslyAbigail

Күн бұрын

Пікірлер: 58
@TheLakingc
@TheLakingc 6 ай бұрын
Thank you for the link to the magnetic sheets and primer to paper piecing. I keep wanting to do that, but not sure how. Nice and simple. ❤
@victoriakelly8989
@victoriakelly8989 5 жыл бұрын
Thank you so much for showing us paper piecing dies. I am more of a beginner myself and my projects never look like others on you tube. I think a lot of crafters have been doing it so long there is an assumption that we all know the basics but, at least in my case, that is not the case. I really appreciate your taking the time to show us newbies the ropes.
@lasinmt106
@lasinmt106 3 жыл бұрын
Fun video to watch. Enjoyed even though I do have the larger Platinum 8.5 same rules for plates. Now when you have an embossing folder that won't press in as well as you want add a cardstock shim or two even. Cereal boxes the flat larger sides many of us save for this very purpose. I go through a Post Brand shredded wheat box every week for the fiber. Oh wait and Cardboard FIBER too. I ended up with saving so many I had a stack of over 40. So quit. But I also save smaller thin boxes that some items arrive in and you throw away too. NOT the thick corrugated cardboard it's thinner material that is often printed on. Ok great shims. And another hint but I do not always follow is to spritz your paper lightly and put into the folder and run through Once bring back through towards you and run again making it three times through before peeking into the folder to see how well it embossed. And so Tim Holtz rule of thumb is 3 times through for embossing period or always. And he spritzes too using small very fine spritz bottles that Amazon and some other sellers including I bet Micheals sells on the cheap too. One light spritz is probably enough most times. By now it's two years plus later and you are an expert at this. But incase others are wondering how to get better results these three hints, cardboard shim or two or cardstock, three times through and finally spritz or not to spritz. (If you colored your paper or water colored you may not want to for example. I often use pastel chalks myself so spritzing is not my choice and I get good results from the shim and three through rule.
@jeepgirlscozycrafts
@jeepgirlscozycrafts 5 жыл бұрын
Eeeks so much work! I just use white card stock and color with markers, colored pencils or water color... just don’t use a ton of water with your paints. TFS
@ElishasCraftyHoplop
@ElishasCraftyHoplop 5 жыл бұрын
I wish I'd found this video BEFORE I started mucking around with my new die cutter--made some beginner mistakes--but somehow managed to avoid breaking the machine. I love this video. Thanks for the great tips!
@MissMala
@MissMala 9 ай бұрын
Five years later and this is still very helpful!
@charlottewhitehead20
@charlottewhitehead20 3 жыл бұрын
You have to use both cutting boards for the thin ones, thank you for sharing!!
@CajunPride777
@CajunPride777 3 жыл бұрын
Different makes of embossing folders need different sandwiches. For really thin ones you need to add a shim
@unexplodedbombshell3998
@unexplodedbombshell3998 4 жыл бұрын
I hope you've worked out your embossing folder problem....add more thickness by putting card stock or paper into the sandwich. Just enough to make up the thickness between the Sizzix, and the ones that work for you. Great review. You're very thorough. Thanks.
@barbarabisson2551
@barbarabisson2551 3 жыл бұрын
So, will 3-D folders work in this machine then?
@Kammitoes
@Kammitoes 3 жыл бұрын
@@barbarabisson2551 The quick answer to this is that every die cutting machine will handle 3D folders. Just use the base plate, then load up your 3D Embossing Folder with cardstock loaded in, then the top plate you usually use when die cutting. If you find the embossing is too deep and breaks the card, load it up again and this time spray the card with a fine spray of water. If you find the impression isn't deep enough, put a layer of cardstock under the embossing folder and try again....or shim it with the metal plate you use for intricate dies. Good luck
@barbarabisson2551
@barbarabisson2551 3 жыл бұрын
@@KammitoesJust so you know, not every machine accepts 3-D folders. The opening in the electronic Logia I just bought is not wide enough to accept a 3-D folder. Otherwise it embosses thin folders very well. None of the machine descriptions tell you the depth of the opening, so unless they specifically say it'll emboss 3-D, you're gambling.
@Kammitoes
@Kammitoes 3 жыл бұрын
@@barbarabisson2551 Sorry Barbara, I guess I was a little too encompassing in that statement. I admit I've never heard of the Logia and it was implied that I was referring to all Die Cut and Emboss Machines with a cutting width 6" and greater. Just looked the Logia up - do you mean 3D Embossing Folders won't fit height wise? You have to adjust the plates...it will fit just fine if you don't try to load the sandwich up as if the folder were a thin die. Take a look at the Gemini how to's for a more detailed explanation. They have thin feeding slots too.
@barbarabisson2551
@barbarabisson2551 3 жыл бұрын
@@Kammitoes thanks for the try, but it would have to go through without ANY sandwich. Logia looks to me like the cheaper brand of the Anna Griffin electric machine. Embosses the thin folders so well with just the top and base plates..maybe if there where 2 very thin plastic adjustment plates, but they said they don't make any. I, also, assumed that every die & emboss machine would handle any depth with adjustments. It was my mistake. I should've called them before buying. I miss my Grand Caliber, where I could adjust the sandwich to cut and emboss everything, except steel wool dies, which I don't like anyway.
@severussnape3949
@severussnape3949 5 жыл бұрын
I Have Mine In My $5 Michaels Bag Also + Another Bag Filled With Magnet Sheets That Hold My Dies. Those Bags Are Great For Everything!!! x
@nedanashu5025
@nedanashu5025 2 жыл бұрын
I have the same problem with the sizzix embossing folders just don't work in the spellbinders they are very thick, also have a problem with sizzix intricut dies they don't cut the details out......I'm thinking of selling it & getting the sizzix foldaway.
@webdeb3745
@webdeb3745 2 жыл бұрын
Love the bag you have it in. Where did you get it??? Thank you for the informative video.
@kathyfay5486
@kathyfay5486 Жыл бұрын
So I'm new to this. I was following the picture of the sandwich and I put everything backwards. I put the die upside down and cut it into my mat. Is it ruined?
@kkacz7783
@kkacz7783 8 ай бұрын
Lightly mist your card stock before putting it into the embossing folder and running it through the machine. It softens the fibers of the card stock allowing the embossing to happen. Or, add an additional piece (or two) of printer paper over the folder but under the embossing plate. This acts as a shim to increase the roller pressure. You may have to experiment to see whether 1 or 2 “shims” helps your end result.
@AnasCreations
@AnasCreations 5 жыл бұрын
My cutting plates are worn too and I also get the imprint on my paper when I run it through. I own a big shot. I don't like the fact that it doesn't fold for when I haul it to crops. I really like your bag & the fact that your machine folds up. TFS! XOXO
@thegreenwoodhub1279
@thegreenwoodhub1279 4 жыл бұрын
Hello, do you know if the big plus die cut fits to cut on the platinum spellbinders machine? Thank you.
@CraftingandRelaxing
@CraftingandRelaxing 5 жыл бұрын
Thanks for sharing. I wasn’t familiar with your machine because I have Big Shot. That bag was a good deal! 😊
@bettybedford2333
@bettybedford2333 4 жыл бұрын
You’ve helped me a lot, thanks.
@DianaHernandez-kn1ne
@DianaHernandez-kn1ne 5 жыл бұрын
Great explanation, thank you.
@addiecarter4356
@addiecarter4356 5 жыл бұрын
Thank you so much for sharing this information.
@sandramullen7804
@sandramullen7804 3 жыл бұрын
I've just received my platinum today. It cuts really well from this , can't wait to use it. I hope someone else more experienced in the folders gives you an explanation as to why it didn't emboss , I need to know too as a beginner. Tfs👍💙
@barbarabisson2551
@barbarabisson2551 3 жыл бұрын
Sounds like you'd need to add shims to add thickness to the sandwich. Folders come in 3 thicknesses. None of the machines seem to advertise if they'll accept 3-D embossing folders, which is the thickest folder. (I had a bunch of these folders with the Grand Caliber machine, which broke using a thick die. go figure) The electronic Logia machine I bought won't accept the thick folders. Sounds like this Grand Caliber upgrade should accept them, though. Thinking I'll need to invest in the Platinum, too...but the price is about the same as the electric! yikes
@Jeanninemh123
@Jeanninemh123 3 жыл бұрын
Use your embossing mat
@nedanashu5025
@nedanashu5025 2 жыл бұрын
@@Jeanninemh123 my embossing mat doesn't fit with the 3D embossing folder, I think i should have bought the sizzix foldaway.
@jeanheming
@jeanheming 3 жыл бұрын
love ur video!!
@DaQueen57
@DaQueen57 5 жыл бұрын
This is so neat. TFS
@DistractedDaisy
@DistractedDaisy 4 жыл бұрын
When the embossing folder is not working because it's too thin.. just add some card stock or thin plastic as a shim.. I use 3 pieces of card stock.. and it worked.. 4 pieces work also..just depends on you folder and how thick it is.
@Creating4Fun
@Creating4Fun 5 жыл бұрын
Wow! That’s a lot of work! TFS
@ermajaramillo7815
@ermajaramillo7815 3 жыл бұрын
Now I want one of those machines.Lol😀
@na7554
@na7554 2 жыл бұрын
When I have the card stock facing up with the embossing mat on top, my embossing mat ended up being destroyed :( Do you know the reason why and what can I do to stop that from happening again?
@cassiesherlock
@cassiesherlock 3 жыл бұрын
Hi, will paper color foam work on die cutting????
@etchingsofthepast6781
@etchingsofthepast6781 5 жыл бұрын
Thank you for this! 😊
@TheLakingc
@TheLakingc 6 ай бұрын
Add a plate or two. For embossing.
@helgahofmann6393
@helgahofmann6393 Жыл бұрын
Maybe use a shim and/the mat or maybe use both plates see what works. I have to use a shim on my machine. Good luck
@GinaLovestocraft
@GinaLovestocraft 5 жыл бұрын
Great tips ❤️ Great video 🌸 TFS
@hairbyhernandez4935
@hairbyhernandez4935 5 жыл бұрын
Hola. I use a piece of card stock underneath. Makes the folder alittle fatter.
@CuriouslyAbigail
@CuriouslyAbigail 5 жыл бұрын
+hairbyhernandez that’s a great idea! I’ll definitely have to try it out
@KatheD
@KatheD 5 жыл бұрын
Sizzix and Spellbinders use different specifications and Just Judy Crafting is right, you need a shim. You may need cardstock or even cardboard. I use the thicker pieces that back paper pads. You'll need to experiment until you get it right, but don't force too thick of a "sandwich" or you could damage your machine.
@CuriouslyAbigail
@CuriouslyAbigail 5 жыл бұрын
KatheD thanks Kathy! I appreciate the advice. I’ve tried cardboard but it wouldn’t feed and didn’t want to force it and I tried cardstock but maybe I just need to experience with layers of cardstock.
@nedanashu5025
@nedanashu5025 2 жыл бұрын
@@CuriouslyAbigail I had the same problem. it just doesn't work.
@user-lc7zc6cj4z
@user-lc7zc6cj4z Жыл бұрын
that embossing tip... bravo!!!
@ceciliajimenez7927
@ceciliajimenez7927 4 жыл бұрын
Can I use 2 papers at a time ?
@kathygroves5540
@kathygroves5540 5 жыл бұрын
Next time place all three colors together and cut all at once the spellbinder can cut it if it’s not really thick paper
@ritahoagland7247
@ritahoagland7247 3 ай бұрын
Thin dies need an extra shim
@jenniferburgess8844
@jenniferburgess8844 2 жыл бұрын
You just need to add a shim (a piece of paper). If it still doesn't just add another shim.
@justjudycrafting7401
@justjudycrafting7401 5 жыл бұрын
On the die you couldn’t get to work you need to shim it up. Put a thick piece of paper on top as a shim.
@CuriouslyAbigail
@CuriouslyAbigail 5 жыл бұрын
Just Judy Crafting thanks Judy! I’ll have to try that. I appreciate the tip
@sandratheprocraftinator945
@sandratheprocraftinator945 5 жыл бұрын
$60 really? And a coupon? Where? Lol. Cuz I was told we couldn't use a coupon with these. I've heard we can use a self healing mat instead of the plastic plate, I haven't tried it. tfs I have the big shot and I wished it would fold. I just used a new toothbrush and a needle lol. I could use those magnets live your storage box , I need to but one like that for my dies. I like it and all in one place, my dies are lil in three different places im unorganized at the moment 😱
Are you making these 5 common DIE CUTTING MISTAKES?
11:40
CraftStash
Рет қаралды 104 М.
What you should NEVER do with the Betterpress!!
17:38
Stephanie Chestnut
Рет қаралды 21 М.
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
Metal Die Cutting Tips & Tricks *HIGHLY REQUESTED*
14:26
Scrapdiva29
Рет қаралды 65 М.
Because You Asked: How to Emboss with Various Embossing Folders in Platinum Machine
17:29
Annoying Lines On Your Die Cuts?! Do This!
8:43
Handmake With Love with Anna Helman
Рет қаралды 67 М.
NEW! Spellbinders Black Platinum 6 Die Cutting and Embossing Machine
20:56
Lisa Mears Designs
Рет қаралды 3,7 М.
How To Cut Dies WITHOUT using a Die Cutting Machine
12:55
Faithful Designs by Christy
Рет қаралды 278 М.
🤩 Mind Blowing Die Cutting Hack! 🤩
6:57
Handmake With Love with Anna Helman
Рет қаралды 88 М.
My Favorite Die Cutting Hack! (Handling Lots of Little Die Cuts)
31:23
Jennifer McGuire Ink
Рет қаралды 131 М.
How to use dies to emboss
13:40
Christine Stokes
Рет қаралды 24 М.