Kawasaki KRX 1000 Center Caps Keep Falling Out? Our Cheap Durable Solution!

  Рет қаралды 2,002

Rebelsoffroad

Rebelsoffroad

Күн бұрын

Пікірлер: 10
@rashellehelms3780
@rashellehelms3780 9 ай бұрын
Have used this for a year now on two machines. I bought them in black. You must have wheel spacers. We have not lost one yet and we have been up and down red and black trails. Thanks for video, hope it helps some people out. Easy on the wallet looks good, and it lasts.
@rebelsoffroad
@rebelsoffroad 9 ай бұрын
Thank you and Nate for the tip! This was a great idea. Good point about the spacers
@sinned96
@sinned96 9 ай бұрын
I bought my machine used when I went to take my wheels off to put my megabytes on I had a heck of a time getting the wheel off after all the lugs were removed. Turns out the previous owner silicone the caps on I swear he used a tube of silicone on each cap it was. They were so full of silicon it was tough to get off. I had to take a razor knife and cut all the silicone off the axle nut and threads and then wire wheel it to get it all removed but I'll tell you what you weren't losing no center caps
@rebelsoffroad
@rebelsoffroad 9 ай бұрын
I’ve heard of doing this as well but man I would have been mad if it had that much on it lol
@sinned96
@sinned96 9 ай бұрын
That'll only work if you have wheel spacers. Because the axle nut sticks out farther in the rear then those caps do. I noticed with my applesauce cups which are about the same depth as the stock caps. The applesauce Cup on the rear was right up against the end of the axle nuts. Couldn't run a flatter cap. I have wheel spacers now, and I can run a flat cap
@rebelsoffroad
@rebelsoffroad 9 ай бұрын
Great point!
@atcdan133
@atcdan133 9 ай бұрын
how's that sidewall slug holding up? do you have many miles riding with it in?
@rebelsoffroad
@rebelsoffroad 9 ай бұрын
It’s holding up great! Have a bunch of miles on it. Put it in in September and been all over Have almost worn the bolt off of it lol still holds air
@nicksaunders9756
@nicksaunders9756 6 ай бұрын
Why couldn't a guy just glue them on with some locktite adhesive.. don't they just stay in the wheels anyways when you pull them off ? I lost a cap on my krx on my first ride. Definitely irritating
@rebelsoffroad
@rebelsoffroad 6 ай бұрын
You could definitely use some adhesive if you haven’t lost them already haha I wasn’t so lucky
UNI Air Filter For The Kawasaki KRX & KRX4! Cleaning, Oiling and More...
35:37
黑的奸计得逞 #古风
00:24
Black and white double fury
Рет қаралды 17 МЛН
Human vs Jet Engine
00:19
MrBeast
Рет қаралды 46 МЛН
Testing Dangerous "Life Hacks" from 1910.
16:49
Turnah81
Рет қаралды 348 М.
swing out tail gate KRX 1000
5:06
Pro Steel Products
Рет қаралды 963
Is Your Car Ramp a Death Trap? Let's Find Out!
16:55
Project Farm
Рет қаралды 1,4 МЛН
Kawasaki KRX and KRX4 Wheel Width, Back Space, & Spacers Discussion
22:13
Building a Tiny Office Pod Under My Stairs
51:47
Man Made
Рет қаралды 4,4 МЛН
Krx 1000 suspension adjustment - preload and compression
8:22
Right Coast Off-road
Рет қаралды 33 М.
KRX Dash Removal - Getting Started with Accessories
12:44
Deranged Off-Road
Рет қаралды 25 М.