KAWASAKI NINJA 1000 SX | PUIG SLIDER INSTALL VIDEO | 2020 - 2023 ONWARDS

[@marco-58]

Pyramid plastics also made the seat back stop/pad for my ZX9R which i fitted today. Buy British.

[@davidspeight2890]

Thanks Tony. Wish I’d seen your vid before I ordered my new Kwaka N1000SX which I pick up next week from the dealer. Paid them to instal genuine Kawasaki sliders 😮 Watched your other helpful videos also and will instal my own Quadlock stem mounted phone holder. I’m in Australia, in northern New South Wales on the coast. Tweed Heads area. Take care Turbo Tony and thanks for sharing your experiences and knowledge. Appreciated 😃👍

[@THETURBOTONY]

Absolutely awesone bike mate, youll love riding it. All the best David. Let me know how u get on with it 👍🏻👍🏻

[@davidspeight2890]

@@THETURBOTONY thanks so much Tony. I’ve had many bikes over the years and just sold my almost brand new BMW F850GS which is an adventure bike. Only had 1,580km on the odometer as I didn’t ride it much because it’s too tall for me. Shame as it was a nice bike and had heated grips etc. all the extras. The Kawasaki Ninja 1000SX I’m getting is apparently the 2023 model but no real changes apart from paint. I’m getting the green and black similar to your beautiful Tar Monster but it’s more black with just some green stripes. I’ve owned Kawasakis in the past. The Ninja ZX-10 when I was younger and before that the Z1R Mk2 and before that the Kawasaki Z900. Similar to the one they used in movies like Mad Max and the movie “Stone”. Those in-line four cylinder Kawasaki 16 valve engines are 4 generations older now. They’re awesome. Thanks again for your videos Tony. Much appreciated and I’m a subscriber now with bell reminder ticked 👍🙏

[@CrowsQB]

Hello from Canada. I have the same beautiful bike :) I ordered the factory sliders with the intent to install them myself, but I just didnt have the confidence to take apart my new bike, so I took it to the garage and paid them to do it lol After watching your vid, I think I could have done it !

[@THETURBOTONY]

Hello. You cant beat having it Installed professionally. Least you have piece of mind that it should be right and under warranty. All the best to you in Canada

[@Mr53T]

Good video and very useful showing how to remove the fairings.

[@THETURBOTONY]

Thanks. Took me a while to figure out where all the bolts and rivets was lol

[@AutoPod]

Thanks for the video mate looks easy to install

[@THETURBOTONY]

No problem mate enjoy

[@jasong728]

Another stellar video Tony. Greetings from Canada, I have the same bike, in that color, with the bags, too. I love it. Have the taller wider oem screen and I just installed the Moriwaki 2-position slip on retaining the catylic converter. Love it . Sounds deeper but not loud. Safe riding T !!

[@THETURBOTONY]

Hey, thanks for the comment. Ill check out the Moriwaki never heard of them here in the UK. Im looking at upgrading my exhaust but have not made my mind up yet , too many choices. Awesome bike in best color 👍🏻👍🏻

[@TheButcherKhan]

Awesome video. I've just bought a 17 plate z1000sx... Its a great bike.... I've ordered some sliders and will be installing them next week... Your video has helped me a lot... Cheers pal.

[@THETURBOTONY]

Thankyou for the comments. All the best with the bike

[@freddiepad9619]

mint video mate, YUH

[@THETURBOTONY]

Yuh

[@vladogabris625]

Great video. Vlad

[@THETURBOTONY]

Thanks Vlad. Hope your well

[@MattDiabloTours]

Great video, just ordered the sw motech but there's a significant delay in delivery of weeks so may switch to these with your code!

[@THETURBOTONY]

Looked at a few different brands but I preffered the look of the Puig sliders, delivery was fast just a few days. 👍🏻

[@andyninja949]

What a stunning bike mate lol ...as usual fantastic vid again 👏👌

[@THETURBOTONY]

Todays the day we allowed to ride right ?

[@andyninja949]

Yes mate 👍👍

[@fredorico41]

Trim clips, well what the pop rivet thing is.

[@THETURBOTONY]

Nope

[@THETURBOTONY]

Think they are just called plastic pop rivets

[@tjbrandon68]

Hi mate I can see a new career as a Kawasaki technician looming soon 😊keep them coming my friend 👍

[@THETURBOTONY]

Hey up mate. I wish that would be my second dream job 😀

[@jasong728]

@@THETURBOTONY first dream job ?

[@THETURBOTONY]

Lol My career at the moment is on hold due to covid, however Im a Club dj here in the UK, playing music to crowds is the best thing in the world, my dream job 👍🏻

[@jasong728]

@@THETURBOTONY right on 👍👍🍻

[@vladogabris625]

Hi, this is Vlad from Northern Ireland. Did You Have to warm up engine before taking engine bolts out ? Thank You

[@THETURBOTONY]

Hi, No I didnt warm engine up before removal, all the information I had didnt mention anything about it. Thanks

[@conradaranez6465]

nice bike Tony, planning to have one like that

[@THETURBOTONY]

Crackin bike mate. Glad I got it 👍🏻👍🏻

[@conradaranez6465]

@@THETURBOTONY that bike was my first choice but I settle with a middleweight i got the versys instead, I was afraid that I might not be able to handle its power, nice content Tony, I'm very glad to saw your channel, keep us updated brother with your modifications of the bike.

[@THETURBOTONY]

@@conradaranez6465 great bikes the versys mate, that was my second choice when I was looking at bikes. Did u get the 650 or 1000?

[@conradaranez6465]

@@THETURBOTONY i got the 650, it's quite tall for me but I think its the best bike for our road condition here in the Philippines, I installed several components for my protection this is actually my first time to handle a big bike , last I had was kawasaki rouser 200 model 2010, if you will be able to visit the Philippines You will be very much welcome here in our place , here is my email. [e-mail]

[@Tom-zy6ke]

Hey Tony, great looking bike, and a great video. I may well be getting a Ninja 1000SX myself, and was wondering if you store you bike outside all year round and if so how it copes with cold damp weather corrosion wise?

[@THETURBOTONY]

Hey. No I dont keep my bike outside. Stored in a lockup over winter. So far no corrosion apart from on the chain, even though I have oiled it regular. Theres another channel on here called @sergeant sodom, he has just had problems with corrosion on his Ninja 2020, might be worth a look. Honestly they are great bikes 👍🏻👍🏻

[@Tom-zy6ke]

@@THETURBOTONY Many thanks for the reply mate. Roll on April 12th when the bike shops open again!!

[@WalkinSalmon]

Great video Tony, like most just had myn delivered and looking to add some parts. I can’t make the discount code work :( Keep up the good work

[@THETURBOTONY]

Sorry mate the discount code was time sensetive and I didnt know. Its run out now.

[@mohsinrekhivlogs]

What windscreen have you replaced the orignal with ?

[@THETURBOTONY]

Puig darkscreen

[@mohsinrekhivlogs]

@@THETURBOTONY looks beautiful. Have you seen the touring screen from kawasaki ?

[@THETURBOTONY]

Yeah I have got the Touring screen by kawasaki aswell

[@mohsinrekhivlogs]

@@THETURBOTONY oh awesome. Which one do you prefer and why if you dont mind answering this last one buddy

[@THETURBOTONY]

In all honesty wind performance wise the Kawasaki Touring screen is best by far.only reason I put Puig on was for the darker screen looks.

[@armandblake]

Dang I wish I did this before dropping mine, just fell from side stand since I left it parked in a downhill driveway not in gear. Don’t you have to support the engine underneath before removing the bolts? Does everything line up fine without any support?

[@THETURBOTONY]

Everythings fine without support.

[@armandblake]

@@THETURBOTONYinstalled mine yesterday, went for the SW Motech, hopefully I didn’t over tighten them. Screwed in pretty tight but did not put my weight on it

[@THETURBOTONY]

@@armandblake spot on mate. Hope it does the job for ya

[@LeeMacfarlane]

worth getting a cheap torque wrench on amazon. its just as bad if not worse to over tighten than it is to under tighten made me cringe seeing you add the AJ for extra leverage

[@THETURBOTONY]

🤣🤣🤣🤣🤣🤣🤣 it got sorted elsewhere

[@kapiljolly]

I made a purchase on their website and your discount code does not work.

[@THETURBOTONY]

Think the discount code has ended now.

[@kapiljolly]

@@THETURBOTONY Oh. Thats ok. Thanks for a quick reply. cheers Tony

[@THETURBOTONY]

@@kapiljolly sorry pal. Ill email them and aak for extension

[@heilaw7002]

The oem one looks so much better than this

[@THETURBOTONY]

Nah oem look shite

[@markharrison2484]

£12k bike but no £30 torque wrench. 🤷‍♂️

[@THETURBOTONY]

Proper talk wrench is hundreds. I have a torque bar that I used. Div