kawasaki prairie 360 carb cleaning

[@davidpianosi4512]

You took the time and explained every step. So often these carb videos are sloppily done, but this is clean and concise, thankyou!

[@GarageVlogBob]

Glad it helped

[@cowboyup6438]

Great tutorial Bob, especially one handed!!!

[@GarageVlogBob]

Thanks for the feedback, appreciate it!

[@JamesFurr-u9c]

Love your compressed air for blowing out jets.😂

[@ericpigg2689]

At 1:25, you need to remove the black plastic knob from the petcock before lifting the tank out. It will catch on the frame and break most times if you don't. Nice video!

[@GarageVlogBob]

Correct

[@williamjolly5539]

You seem to know what you're doing with the 360. I have one that has the belt light flashing, and I've checked the switch and did the reset. It does rev up now, but the light is still flashing. I ordered a new belt as the one that's on it is toast, and im not going to try and move it till it's replaced. Any ideas as to why the belt light will not stop flashing? Im not familiar with the limp mode . The atv was given to me by someone who couldn't ride because of back injuries, so putting a few bucks into it is no big deal, so long as it's rideable . Great video! I can clean the carb on this one without any worries.

[@GarageVlogBob]

Unfortunately that was a few years back on a customers machine. I wish I could point you in a direction to fixing your issues but without seeing the machine again and doing some research on afraid I am of no help

[@williamjolly5539]

@GarageVlogBob that's no problem someone will surely have an answer. The carburetor video was a good step by step though. Thanks

[@GuillermoAlvaradoHernandez]

A cuentas vueltas va la esprea de el aire?

[@GarageVlogBob]

I'm unsure what you are asking

[@jeremynelsen4382]

What are the electric plugs for? I have the exact same 4 wheeler and all the carb replacements I find don’t have one of the electric plugs.

[@ryancaldwell5197]

Hey I did everything step for step and now my four wheeler cranks up right away but as soon as I start it it’s revving high like I have the throttle pushed in? Any advice?

[@GarageVlogBob]

You don't have the throttle cable installed correctly it's to tight

[@nicolasdemjan6222]

hello, I have the exact same four-wheeler(with automatic transmission), but I'm having problems putting it in any gear (it only works in reverse and neutral, and sometimes H and L jump, but again I can't put it in neutral), can anyone give me some advice, please, what should I do? Thanks for every reply

[@GarageVlogBob]

Sounds like you are in need of transmission repairs. Unfortunately there is not much in able to help you with over the internet

[@nicolasdemjan6222]

@@GarageVlogBob First of all, thank you for the quick answer :), I was hoping it wouldn't be the worst, but I probably won't do anything with it, I'll have to take it to the service...

[@DannyCortez-kk4fc]

Try giving it gas an then quickly put in gear. That works for mine

[@krishenning5923]

What was that last black tube for right before you took out carb?

[@GarageVlogBob]

Sorry I don't recall

[@davidpianosi4512]

Bowl drain tube

[@ИванЯкутск-е1ь]

👍

[@GarageVlogBob]

Thanks