My FRS15 Skiff walkthrough

  Рет қаралды 14,816

Fishing With Hoang

Fishing With Hoang

Күн бұрын

Пікірлер: 65
@neaptidevlog3732
@neaptidevlog3732 Жыл бұрын
Nice skiff man. Presents very well.
@FishingWithHoang
@FishingWithHoang Жыл бұрын
Thank You!!!!
@tombutler7726
@tombutler7726 Жыл бұрын
Sweet! Your attention to detail is evident.
@FishingWithHoang
@FishingWithHoang Жыл бұрын
Thank You!
@tag_76
@tag_76 Жыл бұрын
Seriously great job building this boat!
@FishingWithHoang
@FishingWithHoang Жыл бұрын
Thank You! And thanks for watchin!
@LordDarthBaiter
@LordDarthBaiter 2 жыл бұрын
Great job on the boat. The "coaming bolsters" on the gunnel looks great. I redid mine this season.
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
Thank You! Yeah it was well worth the extra effort. Perfect height to lean against too.
@AAE-cg1il
@AAE-cg1il 5 ай бұрын
I have my 16 ft. Side console aluminum on a very similar trailer. If you are always bumping the middle cross member when loading……a cheap fix was to put one of those screw in trailer bumpers on it. Worked like a charm….no scrapes in the keel.
@tentwo6350
@tentwo6350 Жыл бұрын
Beautiful build
@FishingWithHoang
@FishingWithHoang Жыл бұрын
Thank you!
@popsfishing
@popsfishing Жыл бұрын
Thanks for sharing! I was wondering how to do the drains and the wires for my boat😎👍
@FishingWithHoang
@FishingWithHoang Жыл бұрын
Glad I could help!!!
@StealthFisha
@StealthFisha 5 ай бұрын
Awesome job on your boat. I think I have decided on building the FRS14 but after seeing your 15 I am having second thoughts, lol.
@FishingWithHoang
@FishingWithHoang 5 ай бұрын
@@StealthFisha Thanks bro! The 15 gets a bit more room and freeboard. I think the 14 was designed to be a stretched FRS12. They are more flat and float in a bit less water than the 15. Either one will be a great choice though!
@StealthFisha
@StealthFisha 5 ай бұрын
@@FishingWithHoang I normally fly fish off a standup paddle board or from a kayak but I recently moved back to the Houston area and started looking for something to cover more water. The 14 seems pretty much perfect for me but your 15 is making me think.
@redfishbum
@redfishbum Жыл бұрын
Great build! Thanks for posting this and other videos. I've just became aware of this boat kit company. Did you build this from their pre-cut plywood or did you just buy the plans to cut your own plywood parts? Thanks in advance!
@FishingWithHoang
@FishingWithHoang Жыл бұрын
Thank You! If you go onto my youtube channel, you'll see a slide show video of the whole build. I purchased the plans and cut my own plywood. The cuts did not need to be super accurate as they would be filled and glassed over. It did take around 8 hours to trace and cut all the peices.
@redfishbum
@redfishbum Жыл бұрын
@@FishingWithHoang Outstanding! Thanks!
@MrJmhess77
@MrJmhess77 Жыл бұрын
Top notch sir. The gunnel you have look much wider than the plans. Did you customize them when building? And do you have any plans or video of how you did this? I love the wider profile it gives the skiff! Great job. I’m getting ready to start my build this fall so doing some research for ideas.
@FishingWithHoang
@FishingWithHoang Жыл бұрын
Thank Ya! Yes my gunnels are wider. Instead of a single shear added to the sides, I four layers instead. Gave it that wide shear line which also directs spray outwards on them white cap days. Go onto instagram and look up my account. My detailed full build is there. "hoang.nguyen82" Good look on your build! If you have any other questions, I might have an answer!
@MrJmhess77
@MrJmhess77 Жыл бұрын
@@FishingWithHoang Sweet! Thanks for the reply. I’ll check it out.
@jasonkeith674
@jasonkeith674 2 жыл бұрын
Great job! I have the plans for the Laguna Madre LM18, from Boat Builders Central and Hoping to get to work on it soon. Any advice would be greatly appreciated. Or even a parts and material list you used on yours. Great boat man 👏👏
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
Thank You! Good luck on the build! I actually do not have a list. I bought mostly from online sources including ebay and amazon. Lumber was purchased locally. During the build, I would research on what I need. Then searched for the same product elsewhere online to see if I could find a better deal. Did that until I completed the boat a little at a time. Ex. Epoxy and fumed silica.. While cutting out the plywood and stitching, I searched for epoxy brands and fumed silica for a seller or dealer as close as possible for quicker delivery and cost. Ended up costing less where I got my stuff on ebay. Same goes with everything. In details of where I bought everything, I dont have that info anymore since I built the boat 2 years ago.
@jasonkeith674
@jasonkeith674 2 жыл бұрын
@@FishingWithHoang much appreciated on getting back to me. I’m sure I’ll be watching your videos over and over during the process. I ordered the fiberglass and resin a while back. Need to make sure it’s enough and correct. Hopefully HD or Lowes will have the wood. Im looking forward to the process for sure. Im up near Texoma, my goal is to have the boat ready for next spring and go to the Gulf for some fly fishing 👍
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
@@jasonkeith674 Have a few guys here in central Texas and hill country looking for marine plywood. There is a lumbar yard here in North Austin who has them and these guys drove to that store to pick up their plywood. Another guy from Oklahoma couldn't find any at all since he's way up there. He ended up ordering the plywood as a decent price plus shipping. I'm not sure if the Dallas area has any. If you need help with finding marine plywood, lemme know and I'll try to find some sources! As far as lumbar for floor supports, sheer bumpers and etc, I bought mine at Home Depot. I used 1x2 Cedar. Was not part of the plans but it was easier to purchase than to get what was needed and required by the plans. It had to be a certain size and no one had it precut. It needed to be custom cut. So with that being said, you can do some modifications but still have the same outcome.
@jasonkeith674
@jasonkeith674 2 жыл бұрын
@@FishingWithHoang man that’s great info and a bid help for sure. I’ll be doing some searching this week of my options. I salvaged some cedar boards not too long ago. I wonder if any of that would be usable? I really need to sit and lay everything out, do inventory, put a plan together. I want to make sure that when I start I’ll have everything needed or at least a parts list of needs and haves. I appreciate you reaching out. 🙏🙏 I’m sure once I get going on this, I’ll be messaging you plenty LOL.
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
@@jasonkeith674 Sorry for the late reply... Any updates on your project? The cedar you have will be great for floor bracing such as floor supports or the sheer bumper. Everything, minus the plywood, was cedar on my build.
@Thrandweel
@Thrandweel 2 жыл бұрын
Hey nice build man! I did the FS14LS from Boat builder central a few years back. Still fishes awesome. Looking at building something a bit bigger next. Hows the draft on it?
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
Thanks Tyler! These FRS boats are great hulls. Saltboatworks released their FRS16 plans not long ago so thats another choice. The draft on what the plans call out is 6". Just about all FRS15s that are on the water are drafting about the same.
@rigonz7804
@rigonz7804 2 жыл бұрын
So cool. I run an Ankona out of arroyo city and I’m surprised how comparable this rig turned out. Wish I had time to build one
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
Thank you! I wanted a Shadowcast 16 for the longest time!!!!! Didn't have the funds st the time so I decide to build one instead. The nice thing about building this boat was the ability to learn how a boat was designed and building one with zero knowledge. It did take time but man it's worth it!
@johnalvarado1337
@johnalvarado1337 2 жыл бұрын
How do you like that ankona? I considered a 1656 salt marsh with this same engine for use in arroyo city
@samh4232
@samh4232 2 жыл бұрын
What was your technique for your lids and the lip system for drainage? Would you next time add transom pods for more flotation and beef up the transom and the transom support to take a 40?
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
Do you have facebook? If you do, hop over to "Salt Boatworks Builders" group. Join and search for "hatch". There is a discussion about it and some detailed photos from a few of us builders.
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
I thought about transom pods. Still thinkong about adding it in the future to see if it'll float the hull in even skinnier waters but not sure if it will work with the trim tabs and all that I have attached to the transom. The FRS15 is rated for 30hp. It gets pretty hairy at full throttle depending on conditions. At 28-29mph solo with light gear, its pretty nimble.
@samh4232
@samh4232 2 жыл бұрын
@@FishingWithHoang yea I’ve been lurking through the FB posts…I didn’t see the hatches but will look. Are the for real looking to design a 20 foot frs? That’s crazy
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
@@samh4232 No idea on the FRS20. Haven't heard of anything in the works. I've only heard of the latest CB17 which I have been eyeing on.
@jeremyjones8484
@jeremyjones8484 2 жыл бұрын
Awesome job on the build. When’s the start of the 16. I was all set on the 15 and then the 16 had to be introduced.
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
Thankyou.. I thought about it and decided not to build the 16. The outboard cost goes up and everything else. So I am gonna roll with this 15 for a long while..
@sharonbraselton3135
@sharonbraselton3135 11 ай бұрын
Wrong 3d printing makes 16 foot cheaper
@RedfishInc
@RedfishInc Жыл бұрын
Damn nice boat, great job. Dude you might want to see a neurologist about your word displacement, could be an early symptom.
@FishingWithHoang
@FishingWithHoang Жыл бұрын
Thanks a bunch. There was a lot I wanted to cover and my mind kept bouncing around thinking ahead. It's unscripted and jacks up my speech lol!
@bipedalhominid6815
@bipedalhominid6815 2 жыл бұрын
Damn do you park it on rocks a lot? How has the bottom of hull handled wear?
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
No I dont park it on the rocks at all. This was actually the first time. There was no other area at this freshwater lake that is this shallow for me to park and privately talk to the camera. I've ran into sandbars left and right in the flats. This boat has beached on sand more than anything and I live 4 hours away from saltwater. 😁 There is no wear on the bottom of the hull. No scratches, etc. Just some bunk scuff marks from parking the boat back onto the trailer on them crazy cross wind days.
@frankbalcer9022
@frankbalcer9022 7 ай бұрын
I'm going to add a trolling motor to my FRS-15 Are you happy with the 55# thrust and 54" shaft length?
@FishingWithHoang
@FishingWithHoang 7 ай бұрын
Most definitely.. The shaft could be shorter but it still works great!
@josecorpus1267
@josecorpus1267 8 ай бұрын
Did you buy their kit or you got materials on your own?
@FishingWithHoang
@FishingWithHoang 8 ай бұрын
I did everything myself. No kits.
@josecorpus1267
@josecorpus1267 8 ай бұрын
@@FishingWithHoang amazing work, thanks for sharing
@FishingWithHoang
@FishingWithHoang 8 ай бұрын
@@josecorpus1267 Thank you! and thanks for dropping by my channel...
@feliperodriguez9693
@feliperodriguez9693 6 ай бұрын
Whatabout a12ft
@ArchieDisanto
@ArchieDisanto 3 ай бұрын
What sea deck/foam did you use
@FishingWithHoang
@FishingWithHoang 3 ай бұрын
@@ArchieDisanto Sea Dek on the deck and amazon eva foam for the floor
@tonystone6955
@tonystone6955 3 ай бұрын
What was your total cost to build the boat?
@FishingWithHoang
@FishingWithHoang 3 ай бұрын
@@tonystone6955 Somewhere around $8k
@scrappinwithlandon7485
@scrappinwithlandon7485 Жыл бұрын
I don’t know if I’m missed it how long is it in new to boats 😂
@FishingWithHoang
@FishingWithHoang Жыл бұрын
15 foot if you're asking about the length.
@BlueLinerMedia
@BlueLinerMedia 2 жыл бұрын
What was the total build cost you think?
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
Hull from plywood to paint was under $2k during 2019 prices. Expect around $3k now days.
@BlueLinerMedia
@BlueLinerMedia 2 жыл бұрын
@@FishingWithHoang with all the accessories in it what would you say it cost total?
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
@@BlueLinerMedia I personally did not add up what I spent but I'd guesstimate around $11-$12k. Other guys have spent more or less.
@HRTOutdoors
@HRTOutdoors 2 жыл бұрын
Where are you located?
@FishingWithHoang
@FishingWithHoang 2 жыл бұрын
This was in Austin TX
My Salt Boatworks FRS-15 Build Slideshow
22:52
Fishing With Hoang
Рет қаралды 123 М.
PEEL PLY: The Secret to Saving Time & Money on Your DIY Projects!
18:30
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
WTF Is A Fjordling?
19:35
VÉHICULE
Рет қаралды 8 М.
Here's Why I Can't Stop Buying Boats (+Buying A New Boat)
19:36
My First Boat
Рет қаралды 160 М.
Saving A Boat From The Earth
18:55
ThatBoatGuy
Рет қаралды 2,8 МЛН
Dream Boat Restoration FINISHED!
15:24
Hookset Happy
Рет қаралды 7 М.
Trolling For Trout Before Winter | Winter Fishing
10:01
Trollin’
Рет қаралды 84
The Cost to Build My SK14 DIY Skiff
5:59
Schwind Outdoors
Рет қаралды 19 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН