Keep Your Engine Clean with This $30 Oil Catch Can Setup!

[@corystaples8948]

I need to stop watching this channel you’re making go broke buying all these things for my Jeep I didn’t know I needed 😂 enter me in for the drawing please!🤙🏼

[@trentoncooke9353]

lmaoooo same, i hate watching these haha

[@trjnsd6874]

Bought a used ‘05 WK three years ago and installed a catch can (BilletTechnologies) on the Hemi right away. Every oil change I empty about a third of a cup of oil out of the can! I learned about CC’s from KZbinr videos. Thanks Y’all!

[@allenvincentjr]

I put one on my ‘17 jku a month ago with 36k on it. Just did an oil change and in one month the amount it caught was astounding. I did use an actual fitted kit with hoses and bracket by mishimoto. It was eye opening enough for me to comfortably recommend a catch can of any sort to fellow Jeepers, or any car for that matter.

[@checkurselfb4uwreckurselfw173]

Like Ford, in their 6.7 from 2011-present, is still using a CP4 pump that will burst & brake up & inject metal shavings throughout the entire fuel system/engine - to the point the owner will have to pay $10K-12K to remedy. Ford knows this CP4 is a bust, but like their 6.0 engines, they do not care because their dealerships made bank off the frequent repairs. Ford sales a disaster prevention kit (LOL) for a truck that people paid $70K-90K. Great Ford. Really "Built Ford Tough". Now I hear that the Mopar 3.6L consumes oil like the vehicle just ate marijuana brownies & oil is its only appetite suppressor. So an oil catch can is most likely needed so one does not burn their motor up because the engine is "baked" (pun intended) & eating all the oil. People buy brand new vehicles at premium prices to buy POS's & have to modify their new vehicles to allow them actual longevity. Maybe the car moguls are wanting to build crap so we will all think EV is the way to go. IDK, but the post herein has validity & I am pissed because I own all motors herein (6.0, 6.7 & 3.6). IMHO

[@kenm9682]

Watched the video and it reminded me to put on on. I'm going to mount mine closer to the engine so it stays warm and doesn't freeze up. The Joy of canadian winters

[@leoaguilar5194]

Inspiring channel to do hands on work on my Jeep Jk. Thank you man for giving us all this material to work with. You are awesome. Don’t ever quit making JK videos!

[@KansasSlim64]

Hey, Ben! Throw my hat in the ring! And thanks for your service! USA retiree here.

[@legoMan104]

yall give so much good info to the community

[@davidcollie55]

my yj 350 needs an oil catch can help me out please sir

[@rcud1]

I saw this and put one of these in, get almost 1/2 a cup oil after just a 1200 miles or so. I got from UPR Products and came with really nice hoses and easy to remove to empty.

[@ToxicGamer-bl2sc]

Hey, I’d like to be entered or something. I’d love to install it on my own JK to keep that engine sparkling clean! Love the content, keep up the great work!

[@rmjryost]

Installed JLT oil catch can on my 2016 JKUR. I get about 1-2oz oil collected every month! Yes they work. Is it worth it? ABSOLUTELY!!!

[@scottlyng7994]

“Hey dad wanna have a catch..... can”

[@auntjanet2346]

Ha, you would win if 'twas up to me.

[@davidahrens1269]

I don’t want tell anybody how to work on their own rigs but I’d recommend silicone heater hose as oil can brake down the rubber in typically heater hoses

[@DJLO50KC]

Count me in the giveaway! I’d love to do another mod to drive my wife nuts! 😂

[@markblandford9346]

I really appreciate this video. I have been seeing people use catch cans recently, and you did a great job of explaining it's purpose. Thanks a million.

[@iloveredandblack]

“Just leave a comment”

[@keithgranado1101]

My wife and I just got a Jeep and we want to go to hidden falls. We’re very inexperienced and would love to join y’all on a trip. Love the channel guys keep the videos coming !!!

[@chadalcock7275]

Planning on installing one in my truck, so of course I'd like an entry. Great video except for 1 thing, the oil is going to destroy the heater hose. You need hose that is meant to handle oil.

[@Charles-m3t]

You still need to check your Pcv valve every 30000 miles because of seal wear on Pcv that rides on the cam shaft that will allow allot more oil to intrude past into your catch can. Just changed Pcv valve at 58000 on a 2019 Ram 1500 and seal was worn out .will be looking into catch can Thanks Jk gears and gadgets

[@spartan463]

Its insane how a universal one is soo cheap but the JK kits are like 10x more expensive. Already on Amazon...

[@bgt595]

New to the JKs land with a 2012 Rubicon and you're the first subscription regarding the specific vehicle.

[@amavisca77]

Thanks for the follow up with the JT visor on a catch can. Your video with the JK surprising the amount of oil sent back into the intake. Thumbs up to your channel and content.

[@BadMotor187]

Thank you, I had kinda written off a catch can as not necessary, but having watched this, I've changed my mind!

[@MichaelCook1981]

PVC is made from oil...so you're good 👍. I always say PVC , instead of PCV. I took my engine apart to fix the Pentastar tick, was replacing the intake manifold gasket and saw oil under the gaskets.

[@adrianbargen9727]

Best for turbo charged motors because of increased cylinder pressure increasing blow by. And only helps direct injection engines from gunking up intake valves over time.

[@redbarry2540]

I’ve been trying to figure out what to do for my JKU, an 08....? Would be nice to have a quick recap, and maybe see what you did again?

[@Mattie_Ice]

This is a common mod on 7.3s also know as a CCV mod. Crank case ventilator. Some guys dump to atmosphere simimar to semis but end up with a truck smelling like oil and smoking. Also whats important is to nevet let the oil freeze in cold climates otherwise your crank pressure will sky rocket and you could throw your spark plugs or injectors. So to remedy this keep it close to your engine to maintain warm oil in cold climates.

[@jad21964]

Thank you. I ordered the very can you have listed in the description. It looks great especially for $28 compared to some other name brands that are over $100. I installed it on my 2016 JKU today and fabbed a bracket from some aluminum angle stock I had left over from another project. I mounted it in the same place you have yours on your JK. I removed the OEM bolt on the fender (where your Switch Pro pod mounts) and put a bracket there to hold the can between the ECM and the brake module.

[@pennypackmtb2542]

I'm overhauling my WJ and the oil catch can is on the list of upgrades. It is a list, after all it's a 20 year old 4x4. Can't imagine the CRUD inside.

[@robertdeloatch8378]

Nice video, but a couple of questions/observations: In the video, it looks like the catch can is mounted higher than the dirty air comes off the motor. Also, looks like as the hoses go forward from the motor to the to make the turn back to the catch can, they are a bit lower than the can. While this may be a trick of the video (around the 11:25 mark) not showing true angles, if I’m correct, wondering whether or not that downhill run to the bend followed by the uphill run to the catch can might impact the flow of the dirty air; more specifically, will the bend/uphill run cause/allow the oil to settle out or pool there. The JK installation doesn’t look to have as severe angles.

[@mtoddvan]

Enter me too please! Not just the residual oil going into the intake makes it messy, but that oil can create deposits of carbon on intake values & can cause values to stick. Lol that I was the only person to invert pcv & pvc!

[@davidmiskiewicz5655]

I will be doing a can setup on my 4.7 wj. Luckily I can cap off the PCv valve at the oil fill neck, and catch the mist from the back of the heads to the can and just have a breather on the can outlet port. Luckily this engine runs on MaP vs MaF so engine wont see any difference.

[@joediver69]

Just got my 1st Jeep it's ATJ 2.4 l 6 speed manual when I always wondered about the catch CAD now I'm definitely gonna get it thank you guys loved the video

[@danwilson2560]

Glad you are showing a cheap way to do this. But I still think there is no benefit. Good on you for not pushing one of those expensive cans. For 30 bucks, it has low expense to go with the low (or no) benefit. I always enjoy your videos!

[@JKGearandGadgets]

I always thought the same way, until we opened up the Ls engine and spent 6+ hours cleaning up years of oil and carbon buildup.

[@danwilson2560]

@@JKGearandGadgets I think you'd have that anyway. Most carbon build up and oil build up would be there anyway. My 2008 Jeep 3.8 is clean as can be after 145k miles. Mobil 1 oil and Top Tier fuel had everything to do with it. But still, there's absolutely no harm in a catch can. So why not? Again, love your videos!

[@that68lifestyle]

I have planned to put one on my JK. I have one on my classic car. Works great.

[@chriscook8076]

Very nice install. I like very much. I’m all about losing the oil out of the PCV System. Thanks!

[@davidbaziii9779]

I'm totally doing this for my YJ and my 3.6 Charger now. Great video. Love both of channels you guys have!

[@JCJustice1]

I had honestly never heard of this option... Awesome information. Toss my name in the hat. Appreciate all the info you guys put out! Maybe one day I'll run into you guys at a Jeep meet here in Texas.

[@jeffleuenroth7849]

Good point about not pouring that oil back in the engine.

[@smokeGR14]

I have a 20 wrangler sport...love hitting the trails. In it...been to Rausch creek 2 twice ..I have 14k on it already just got it may 2020....I'd put this on..

[@MrHotrodder1964]

Change oil often, every 3,000 to 5,000 miles, us a high quality synthetic, like Amsoil or Royal Purple.. will make a big difference. I put an oil catch can on my 2019 Silverado, hardly any residue on two oil changes. On the right track.

[@jaybrown2424]

GOOD DAY FROM OREGON, JUST WATCHED THE VIDEO, GREAT PRODUCT FOR ANY VEHICLE, I HAVE FOUR CHEVYS AND A 2012 JEEP WRANGLER SPORT, THANK YOU AND YOURS FOR ALL THE VIDS.

[@erikbrown8289]

I just a LT1 put in my jk I had them add 1 I think u need even more with direct fuel injection

[@3brothersinarmsoutdoor43]

This is awesome to find an inexpensive way to do a catch can. And free is even better

[@irismercado1288]

Always good to see that you’re always doing something new something different something better in your jeeps and your wife’s jeep love you guys show keep up the good work and be safe

[@daivdpeach2740]

Been watching for a little while, love you guys!

[@josh_rit8045]

Ya count me in! That oil catch can would be sick! Great video too!

[@andrewmason1111]

Nice video Ben! I want to personally thank you for finally explaining in detail how the PCVsystem works. I ordered the plug and play model from your link, thank you again! And say hi to Cassie for me! The North East sure missing you! But you gotta go to Texas. Just as long as you dont become Dallas Cowboys fans! Lol!

[@williamh6547]

I prefer to vent DIRECTLY into the atmosphere 👍👍 make sure I do my part.

[@switchbackoffroad]

Missed your videos during the move. Glad y’all are back!

[@christopherkiger3354]

you can throw my name in too! love that you show and tell... real world jeep diy!

[@jadyoussef3604]

First time Jeep owner 🤙🏼, can’t say no to a giveaway

[@kbialo2340]

I’m in. Seems like a no brainer to protect the engine long term.

[@Bennett-xo6iu]

You guys are doin such a good job on both your channels.. keep the videos coming...

[@daniellorenzo7285]

Ok Im in I will try to installation now that I understand more about Catch can thanks.

[@johnhansen3298]

Great product...👍🏻it’s on my wish list, to install on my wife’s new gladiator, AWESOME VIDEO, watch and like all your videos, good job great channel and information! 😃🤙🏻

[@Mickale-Moranis]

What are your thoughts using the catch-can as a way to keep the oil from being placed back into the air filter on early jeep models. 94 YJ (2.5), 97 TJ (2.5), and 06 LJ (4.0). Seems ring blow-by causes pressurizing the incoming air through the air filter. I've checked the intake manifold nipple to see if there is oil residue in the incoming tube and the intake, found very little if any at all using a q-tip. But the air filter gets oiled up from that ring blow-by. Be winner.

[@JonSoucy]

I installed a catch can on my Infiniti G35 after opening the intake and seeing the oil puddles, it's amazing that OEM's wouldn't add this by default after seeing the amount of oil blow by. It really affected my Infiniti as I had an aftermarket Vortech supercharger and oil is known the lower gasoline octane which is the last thing I needed when I was racing. I never bothered with my 2016 JK because I never drove it hard, but I just ordered a 2021 Gladiator EcoDiesel and I'm trying to figure out if it's really needed since ... ya know it's an oil burner and all! Oh and if it's not too late I'd like to entered ... or something. Love your videos btw!

[@unwrangler11]

Thanks for a great idea! I’ll be doing it as soon as it comes in.

[@josephfink5029]

I’d love to be entered into the chance to get the catch can. Nursing school is rough. I could use some wrench time with my son to relieve some stress!

[@AlejandroSanchez-qo8qy]

Definitely wana see the results for I have a gladiator myself and yea it be awesome to be entered, seems easy enough to install

[@jaydenschmidt1999]

Just ordered mine, so happy I found this video 🙌

[@joehall6684]

Thought about adding one for awhile now.

[@jimmythesaint6184]

I CAN dig it. Count me in for this contest!

[@sailme2day]

yes liked the install video , should help keep that oil clean longer . I am interested in being in your drawing for a free unit. Thank you .

[@gregnixon1296]

I check mine every 500-600 miles. I get 3 tablespoons of a cream colored watery mix. I let it settle in a small glass to allow everything to separate. One third of that is oil. The rest is water and gas. 310k miles, 2002 Toyota.

[@gsdls]

Thank you for the video and thank you for adding the link to the specific hose that you got. I was able to go to Lowe’s and get some heater hose in 10 foot length and I’m ready to boogie and install this. Keep up the good work.

[@gsdls]

You noticed any negative effects of having a catch cam or did you find that you had to replace a standard fuel line with a steel braided line?

[@no2thenwo737]

@@gsdls You don't need a steel braided line, just a 5/8 standard hose. Mine has lasted for nearly 3 years and is good as new.

[@gsdls]

FYI the Lowe’s brand is no good cause it’s not for Under the hood application. It collapses on itself. I ordered the one recommended here.

[@vinjkdiesel3122]

That has to be the easiest & cheapest install vid you ever did brah 🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽

[@MrStatic101]

I have always despised pcv systems because of the whole concept of sending that filth back into my engine. I had no idea this even existed. Thank you so much for the great info. Also I’d like to be entered and win or something.

[@WillysRubicon]

Good review and quality as always, but some of the PCV history information and how it works or what it is for is incorrect. But basics for understanding positives of a catch can is good. Thanks!

[@salbellone4344]

Looks like a very fast easy installation great video

[@chrisreports9031]

Awesome video and useful content and budget friendly 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏✌️

[@kennywood6491]

I love your show and would love to add a catch can to my 1982 Cj 5 project.

[@bryanwatts2626]

I have a 3.8. What hoses and connectors will I need to adapt to the pcv hoses in my jku to connect to the cheap amazon can? 5/8” heater hose? Fittings? Thanks for the help and all the videos you post. Enjoy your channel.

[@lukemoser01]

I just recently bought a JKU and started looking up KZbin videos and came across your channel. The videos are great I just watched the ones about the headliner and the J.W. Speaker head lights. I'll definitely be doing the headliner. The headlights are great but a little pricey for me. I'm sure I'm to late for the catch can give away but if not woo-hoo I have a chance lol. Thanks for the great info on the JK. I just noticed hood the shocks on your JK hopefully the is a video on it. I'm going to look now haha

[@ArdisticCustoms]

You can throw my name in there as well. I need one for my wife’s JL and then one for my LJ. It would be nice to only have to buy only one....lol. Love the videos, both of y’all keep up the awesome work!!

[@royreedyT-Rex]

I would love to try this on our 2000 TJ. Love the information in your videos

[@jamierose4173]

Howdy, great video! According to my Magnusson supercharger install manual, my JK (2012 3.6l) has both a right and left PCV hose... Are you running two cans, one for each line? Or, what am I missing? Thank you!

[@smyerpropertiesllc3858]

Great option. I’m going to do this to all my vehicles! Keep em coming

[@edwardluciano6885]

I just got a beautiful black miniature lab. Any dog hacks for taking them off roading with the fam? I think that would be an awesome, unique video!!!

[@fox351swap]

Great item to add on to any jeep.

[@oscarpatino330]

Thanks for the video Buddy.... i love all of them, you've been an inspiration for me.... keep up the good work as well Cassie's channel....

[@JKGearandGadgets]

Thank you!

[@oscarpatino330]

@@JKGearandGadgets always… stay safe!

[@bradorr7223]

Appreciate you and Cassie. Love the channel!. 1st time commenter long time watcher ;). I have a 2 door JL Rubicon that would love the catch can.

[@JonnyBgooD007]

What are the odds, I was just looking to buy this. Specifically the RIPP Supercharger Brand, being that it's on sale. Great video man!

[@JKGearandGadgets]

Dont forget that the code Jkgear will get you a 12% discount!

[@JonnyBgooD007]

@@JKGearandGadgets that's right and will do! Thanks for the heads up 🍻.

[@stuschultz5968]

Hey. I need your opinion. I have a 2017 jku. I live in Wisconsin which gets cold weather. Do you think I would have a problem with this freezing? Or freezing in the lines which would blow the seals out. Or would you recommend not using it during winter. ? I understand that I would have to check more often during the winter.

[@southernstar_offroad]

Definitely need one for my JK. Also it was cool meeting you at Clayton's!

[@scottbrown7340]

I just got my catch can delivered today. What did you do with the "Brillo pad" looking thing? It is visible in your video as one of the parts, but when you showed us the oil caught by the one installed on your JK, it was not there. Did you just toss it, or is it inside your can?

[@davidwilkerson42]

hey Ben keep up the great work. your videos have help me in my build. I have a 2009 JKU on 37 's I love it. so glad y'all moved to Texas. we are in west Texas hope to meet y'all in person some time. Thanks again

[@herbscott11]

Count me in on the catch can give away. Keep them videos coming!

[@abelcatalan33]

I use a catch can in my 2019 mustang ecoboost and they work great

[@richardalderson1868]

I'd like to be entered or something, lol. It would be my first engine type mod for my JL Willys. Keep up the great works and as always enjoy yours and your wife's videos.

[@sniperfpv]

I ordered one. What is the benifit of putting this on the drivers side vs the passenger side?

[@tomgardner6294]

Going to install one on my 212 JK. Thanks

[@White.Elemant]

Hmmm... Legend has it, 3.6 pentastar has two pcv lines... haven't checked myself (freezing outside, garage full of junk), but if that is the case, you'd (I will) need a twin inlet catch can, or a Y -joint somewhere along the line...

[@JKGearandGadgets]

Usually setups with 2 pcv lines only have 1 dirty line

[@damonvibbert2933]

Love this idea. Makes sense to separate the oil out to eliminate issues!!! Count me in on the giveaway!! You two are great!

[@moabwheeling]

Heck yeah I would liked to be entered Ben . I would use it either on my wife's 07 JK or my 03 TJ . Thank you for sharing your experience with using one . Take care and be safe guy's .

[@Krondor03]

Great work. Been thinking about adding one myself, but there is a lot of controversy over the can isn't there?

[@corbind.9395]

Looks super easy. Wouldn't mind installing one myself! Thanks for the show how.

[@nosdujshsdl]

Did you do anything with the other side? Or does the 3.6 only have the one pcv valve? 3.8 owner here, thanks for the great videos as always.

[@azimutazimut3165]

hey!.. I used that Gates 28491 hose for my catch can and the hose is now collapsing.. I wonder if you are experiencing the same issue?.. I think that hose is not designed for PCV vacuum (which also resists oil and gas)

[@owenwest2402]

I'm so needing to do this cheap easy mod when I do the rebuild on my 4.0 288k no catch can and it shows! 😆