Just another vote of thanks for putting these videos online. They are a really fantastic resource and I cannot believe how much I am learning from your experience. Judging by how much kit I feel I need since watching your videos, must be doing wonders for sales of engineering tooling and measuring around the world :-).
@JoggingWithForks11 жыл бұрын
Every single update just puts a smile on my lips. Love the channel and the content you put out. Why this isn't on TV is beyond me. It should be shown in classrooms to inspire kids and to show them the value and satisfaction of an honest days work.
@DaveStroble11 жыл бұрын
I have no idea what I just saw, but it was awesome! Thank-you. Always great to see a craftsman at work.
@FredMiller11 жыл бұрын
Kieth, Your tip of centerpunching a cut line with a series of dimples is sheer genius! You have made my day with another great tip. I am going to ration watching this series of videos just because I COULD sit on my butt all day and watch you work BUT I need to get something done here too. Great video!
@atomgonuclear11 жыл бұрын
I stumbled across your videos and it made me miss the days of working in a big machine shop, I left to pursue other things, but I did a lot of the same stuff you did (shafts, pumps, bearings) It's always good to see another human that really enjoys what he does and this has inspired me. I'm going back into this field and your videos helped.
@1232sean11 жыл бұрын
I watch your advertisements because I value the wisdom and knowledge you share You show the brilliance of accurate measurement before any metal is removed. Others less knowledgeable might assume material surely needs to be removed sice the bearing won't fit - according to the customer. Don't assume anything!!!!
@ProBulletMagnet11 жыл бұрын
Mr. Fenner, KZbin recommended this video. I decided to watch and immediately my jaw dropped. You are an incredibly skilled machinist. I've been machining as a trade for 20 plus years. I will subscribe and am sure learn from you. Keep up the good work and thanks for uploading!
@NGinuity11 жыл бұрын
I enjoy the music you add... it makes your machining operations engaging and suspenseful.
@mikegdiz666211 жыл бұрын
Keith, just wanted to say thank you for taking the time to make your videos. I have become quite addicted and very much appreciate the quality of video and editing.
@marvinroark983511 жыл бұрын
Keith I Hope That You Enjoy Your Work As Much As I Do Watching You, Wishing I Had That Talent. You Must Have Fun , Because That Is An Art That Seems To Have A Lot Of Satisfaction. I Have Watched All The Shaker Vids And with Great Pleasure I Have To Say Thanks For The Vids
@craftchick67411 жыл бұрын
I don`t have a TV, because of all the crap. This is what it`s all about. Thank you very much for uploading videos and giving me the opportunity to learn from a pro.
@ArtemiaSalina11 жыл бұрын
People used to complain that the potential of TV was being wasted, but Keith and many others are making KZbin into what TV COULD have been, a great educational tool. I salute them for that!
@KeithFenner11 жыл бұрын
Hello Elizandro, Thanks you for the comment, everyone should think about their own safety while running the machines they operate. Keeping, what I call, a healthy fear! In cold climate, during winters I wear tight long sleeves, making sure I have no frayed holes or tears. I'm glad there are safety suggestive videos out there, on KZbin. I create my videos to share my 37 years of experience and if you grasp the proper sense of safety, you should be fine. ;{)-----
@warrenpamment11 жыл бұрын
hi I like the way you fast forward thru all the noise but still show how you make things great video
@WAVETUBE8411 жыл бұрын
Another great video/episode of the Keith Show! One tip: my friend made a center punch out of an old/dull tap. He ground off the teeth and then ground the tip to a point. That sucker works super,.
@stevemackelprang847211 жыл бұрын
Hurrah another video! A tip for cutting thick steel with a torch is while you are center punching the cut line, give the corner edge a hit with a cold chisel. This will raise the metal just a little and when you start your preheat, this raised metal will get to cutting temp much quicker, you can start your cut a lot sooner saving both time and gas. I like to also run some soapstone over the centerpunch marks , this makes them super visible.
@terapode9 жыл бұрын
I have to confess that watching you guys working with imperial units makes sense.
@txm1008 жыл бұрын
Not.
@KeithDDowning11 жыл бұрын
Nice Keith. So you will mount the boring bar in the chuck with a live center at the tail stock, then bore the non-rotating tubing with the using the carriage feed. Neat stuff. Looking forward to more.
@FKSPARTO11 жыл бұрын
you did a good job with that big request in your small shop.
@RaysGarage11 жыл бұрын
Nice work Keith, and thanks for the snap gage tip!
@danielhoffman229911 жыл бұрын
I agree Toly....I was apprenticed to a fine old gentleman who was a former flight engineer on a B-26 and became a machinist there after...The learning experience was the best time of my life..If I only had a nickel for every time he told me to think solid you darn hippie kid I'd be a rich man today..He could make almost anything with the most basic shop tools..including the shaper that I only saw used by him in the 25 years I was there.
@martinwalters19548 жыл бұрын
I wish my jazz guitar teacher would have been as open and in depth as you are. :)
@CadEngineer111 жыл бұрын
I like the hole in the wall for a shaft to pass through :-) (At the end of your lathe)
@Brokoro11 жыл бұрын
I stumbled across this video. I did enjoy it and there are a few things I could definitely learn from you. btw you have some pretty nice machines from what I could see. I think I'll be sticking around to see what else you'll upload.
@ch408w111 жыл бұрын
Great tip on the snap gauge...I've always hated those things....maybe I'll give them another chance !!
@frankpitochelli67868 жыл бұрын
You sir are a true craftsman...machinist, this is a lost skill that was so prevalent during WW II....men like you built the machines and tools that won the war and built this industrial machine called America. You are a true and smart craftsman..!!! well done, Great vid r o and great work. !!!
@MilanDupal11 жыл бұрын
Impatiently looking forward continuation of the story, new lesson to improve my knowledge!
@KeithFenner11 жыл бұрын
It's a trade with no real door with and enters here sign on it, now that Technical schools are closing because the funding has gone elsewhere! A lot of hobbyists buy machines that have been retired and sit in used tool houses, EBay and Craig’s list. Clean them up and start practicing with the information found on the web, KZbin and owner’s manual. There are a lot of guys out here that are just as much interested in sharing as those who want to learn. ;{)-----
@dhaval32mistry8 жыл бұрын
you are doing good word by making this whole videos... thanks i learned to much from them.
@bobbydigital61159 жыл бұрын
keith your fast forward scenes are awesome
@KeithFenner11 жыл бұрын
Well in the winter I work in long sleeves that are tight and not loose or hanging. I find that the camera makes the beard seem closer than it is in real life, to some danger, believe me I'm the last person that wants’ it to get caught, as I have gained more experience, I have less tendency to cram my face right into my work, to see what’s going on. I will fold and band it if it becomes too long for the project at hand. I love the concern and thanks for the comment! ;{)-----
@RichardKinch9 жыл бұрын
Well done demonstration and videography.
@bigfootGeorgia11 жыл бұрын
Thats a good size lathe, thanks for sharing your knowledge...
@KeithFenner11 жыл бұрын
If I was machining hot roll or some real out of round material I would have skimmed the outside first. Thanks for your comment and to skim it, is to make it 100% true and that is why you learn to do that. The set up I was using was closer than that needed without being to nit picky, for a non rotating part. ;{)-----
@desmes6211 жыл бұрын
I love your signature ;{)----- That's all you did;) I have a small lathe and milling combined HQ800, and I can not afford arosage fountain or flood machine. Thank you for your precisions.
@jamcat6211 жыл бұрын
I'm glad you put the note about the face-shield in there. Wearing one, kept what was a severe injury in it's own way, from becoming even worse. I didn't need plastic surgery after my accident, but my face-shield needs replacing. :)) I even made a stupid video about it. "Why I haven't made vids lately."
@blthetube19 жыл бұрын
I hope all people in the education field are making notes.... This IS the future of education. Virtually NO MORE classrooms.
@idomake44297 жыл бұрын
For the most part I'm in your camp on this, except for trades. Watch all the machining vids you want, but until one runs one under the watchful eye of an experienced master, one will NEVER get all of the skills required.
@mrmann23877 жыл бұрын
Rubbish!!! People like you are dangerous and cut body parts off.A Machine Shop is a class room.I am a union trained toolmaker,Trust me,you and those of your ilk are dangerous to people like me.
@danielzunigagutierrez6300 Жыл бұрын
Exactly. Nothing Is happening in the classrooms. They eliminated trades in schools long ago and children are being left behind. You are either academic material or your future Is your own responsibility; no one else's.
@billdlv11 жыл бұрын
Nice work Keith, glad to see you using the cutting torch by hand again. Not that I am against the plasma but something about nice flame cuts by hand :>
@floppy04118711 жыл бұрын
Wish i had a workshop like that!
@ChrisB25711 жыл бұрын
Haha - oops, my bad, sorry! Thx for reply and I'll look closer next time. I guess it was a sort of 'conditioned response' seeing a chuck key sittin' there :). Great work sir - I'll be watching your material a lot more, thank you.
@GeneralG181011 жыл бұрын
Holy cow .002" runout at the jaws of a 3 jaw chuck, that's a nice chuck
@KeithFenner11 жыл бұрын
In the can is sulfur based cutting oil and on the ways is way oil. Some chucks only have one square drive to tighten the chuck and the ones with three are for convenience, sometimes you get the need to check them all but one should do the job. Also one may close the part in the jaws closer than the others. ;{)-----
@KeithFenner11 жыл бұрын
Hi Mehmet, I wasn't sure if you were asking if it was hard to do the job in the video or it was a hard job making the video of the job. Anyhow I can tell you that both are challenging and gaining a little bit of experience with each project helps build the confidence and skills of the next. ;{)----
@jeffryblackmon48468 жыл бұрын
I like your video and your oxy-acetylene cutting advice. Thanks.
@devadasan123das57 жыл бұрын
Jeffry Blackmon
@robertx690611 жыл бұрын
hey Keith everyone is waiting for the next video we are all addicted - better than.... ha carry on!
@chemech11 жыл бұрын
One of the best displays of what safety glasses can do for you was in the personnel office of a factory where I unsuccessfully applied for summer work back in high school... Photos of ugly-assed guys with facial bruises and ear-to-ear grins holding up their busted safety glasses which had just saved their eyes... Cal-OSHA's "Convincer" with the pictures of punctured eyeballs was a close second...
@KeithFenner11 жыл бұрын
It was challenging at first, but after you get use to switching hands it cool! I had no problems with the Clausing too. If your a good free hand mill operator you can easily switch hands for the lathe also, just like switching your stance on either side of the knee. ;{)-----
@crabbydale11 жыл бұрын
I love your Vids... You would make an Excellent Instructor
@KeithFenner11 жыл бұрын
No, I have never had a problem with hands & grime, but I do wash them when need be. they do hold stains from time to time depending on what I'm working on and I have to use crack cream sometimes, because I dry them out from washing quite q bit. ;{)----
@turftone11 жыл бұрын
I love your videos! your tooling is just amazing, the way you utilize your lathe and pimp it out to do a specific job is super cool. I have not seen in any of your videos a tour of what all is on the shelf above your lathe where you keep your tailstock drill chuck and quick changes tool holders and various centers. Any chance of a close up of that and possibly a description of what's there and why, prefered tools and favorite go to goodies, hope that's not asking too much for the future, thanks!
@DakGuy0511 жыл бұрын
Wow that sure is a beast compared to my 3/4 horse wood lathe!
@ChrisB25711 жыл бұрын
Enjoyable vid - as an old machinist I identified all way thru. BUT - spotted a real 'naughty' at 26:12 ..... chuck left with key in place!!! I guess we've all done it but always bothers me to see that! Nice bit of torch cutting BTW. :)
@12345NoNamesLeft11 жыл бұрын
I watch "How it's Made" but each segment is only 5 minutes long and full of errors. This is far more satisfying.
@KeithFenner11 жыл бұрын
Thanks for the comment! Really! Like I have stated in the past videos If spit out, slang or nick names or miss call a tool or etcetera, jump in and keep me inline. I do see the importance in one needing to look it up or reference to shop for one! ;{)-----
@spb14141410 жыл бұрын
I love the fact he is using a HD "Employee's Only" tape. roflmao.
@KeithFenner10 жыл бұрын
It was laying in the parking lot next to my truck when I was loading my purchase and I grabbed it, Had to laugh when I got back to the shop and saw it said Employee's only! You know the tape OSHA approved, modified so you can't get hurt or hurt others! ;{)------
@spb14141410 жыл бұрын
I've used many, many over the years. That model was semi usable.
@Bowtie4111 жыл бұрын
Keith,been watching your vids for awhile.I am a disabled ex-machinist but still try to make things when I'm up to it.As for their +000/-.002 tolerance.....Why wouldn't you do a light knurl and turn the OD back down.I would think it would still leave more than enough surface are over the bearing area.Keep up the great videos!
@mikldude11 жыл бұрын
great video, thanks for posting.
@KeithFenner11 жыл бұрын
Thanks for the comment! And yea that is the name of the game, sometimes! love it when it's a combo of machining and welding or welding then machining. ;{)----
@KeithFenner11 жыл бұрын
I don't skid my wheels at a stop signs either! LOL, I take it easy and just slows it down enough so I'm not waiting forever! ;{)-----
@teguhjayatehnik59692 жыл бұрын
Thank you
@Excel4wd11 жыл бұрын
Yeah!... Duluth fire hose pants. my favorite work pants hands down.
@nealmeal200011 жыл бұрын
good snap gauge info
@AbominalBos11 жыл бұрын
Can't get enough of your vids. Love it. What is the name of the boring bar sleeve/bit holder that you use and where can I get some?
@cleodionilsonalvesdasilvacas037 жыл бұрын
gostei ai do seu trabalho com o micrometro eu tambem vou atuar nesta área de torneiro mecânico é oque mais gosto de fazer ,, meus parabéns muito lindo seu trabalho ja me escrevi no seu canal do youtube ok
@michaeljp8611 жыл бұрын
Home depot has some stuff called dark thread cutting oil, I was going to pick some up next time Im in the area. With what little tinkering I do that should last me 10 years. I appreciate you answering my question.
@KeithFenner11 жыл бұрын
Thanks for adding your comment on this subject, I'll try the chisel trick next time, I would have smeared in some soap stone if it was right there handy. ;{)----
@Strum222311 жыл бұрын
Proper etiquette for spinning a wrench- spinning with the thicker end towards direction of travel.
@KeithFenner11 жыл бұрын
It was on one end of the shaft, the tolerances were called out by the manufacture of the bearings, not the manufacture of the equipment, I made a note of what they were in writing, the stock size of the shaft, .001" under that and going into the sand & gravel pit, not really even making a full revolution I saw it not that important. ;{)-----
@KeithFenner11 жыл бұрын
Thanks for the comment and I'll keep that in mind. ;{)----
@KeithFenner11 жыл бұрын
Chris, thanks for the comment, but look closely, you'll never see the chuck wrench in a lathe chuck in my shop but I do leave it in the lathe chuck that was modified for my weld position er for handiness, that has no centrifugal force at all! LOL ;{)-----
@KeithFenner11 жыл бұрын
I have been working on one for a week now and have trashed hours of footage, I was not happy with and had to tend to some work at hand. I am working on the next box giveaway, video with new nominations and new tools for the chest, along with some insights to the project of the giveaway. I want to get over this hump of a video also! LOL ;{)---
@KeithFenner11 жыл бұрын
I use; dark sulfur based cutting oil, popular names are Hercules and Ridge. on the steels and stainless steels and I use Alumtap for the aluminum. ;{)-----
@sisseeboy11 жыл бұрын
damn brother you need to invest in an air chugger for that chain hoist.
@stanleyrodgers337511 жыл бұрын
TheFlyBoy is correct and I agree with the importance of keeping the newbies straight, but I hesitate to call you out on an occasional lapse in tool terminology, given the rich effort you make to provide useful information and entertainment! However, since you asked for it...LOOK OUT, LOL!
@hunterthelord11 жыл бұрын
at our old shop we had the tail end of our lathe up against the john. if you where taking a crap the chance was good to see a spinnig peice of steel right in front of you. the sink drained into the toilet via an old bicycle inner tube....
@KeithFenner11 жыл бұрын
It was supplied by the customer for this pacific job!
@KowboyUSA11 жыл бұрын
Thanks for sharing.
@KeithFenner11 жыл бұрын
It is the same kind of products that you use on pipe cutting machines but I buy it in 5 gal. containers, last over a years time. ;{)----
@PacoOtis9 жыл бұрын
Thanks!! Very well done. Learned a lot. There are always, always sharp shooter Sunday morning quarterbacks about stuff like this. It appears they forget that it is true 6+6=12 but so do 7+5. Again, Thanks!
@KeithFenner11 жыл бұрын
Telescoping gages is another name for them! ;{)-----
@millomweb11 жыл бұрын
YAY ancient Colchester Student ! Am I right in thinking the start/stop handle also has the position to short the motor connections to effect braking ? Oh, nice workshop!
@gbowne111 жыл бұрын
23:30 Keith, no burning your shoelaces. Been there done that.
@LuizCarlos-cj3nu8 жыл бұрын
acompanho sempre esse canal,gostaria por favor que traduzicem para o português,ou colocar legendas em português
@wingarcher11 жыл бұрын
Hooray for a new series! Quickie about the advertising- do you get shafted if we click "skip ad" after the 5 seconds, is it better to let it run to the end, does it even matter? I hate advertisement but am happy to let them run and ignore them on your clips if doing that helps you out.
@doogdoogdoog34211 жыл бұрын
Good video and what type of lubricant are you using in that can with the brush? Are you using way oil on the lathe slides? I always thought that you should tighten the chuck scroll by using the three slots provided but it looks like you are only using one.
@KeithFenner11 жыл бұрын
It actually has a small drum brake on main shaft, on the inside of the belt pulley. ;{)-----
@millomweb11 жыл бұрын
It didn't seem overly effective - is it out of adjustment ? With the one I used, I think it was reckoned that even at top speed (1200rpm?) it could stop the chuck in half a revolution. Ours hasn't got a brake but a clutch instead - so the motor continues to run.
@KeithFenner11 жыл бұрын
I had noticed to high rub areas where the bore of the bearing was making contact, and very clear that they were what was causing most of the problem so I hit those two areas without working the whole diameter. ;{)-----
@peeyushsingh509310 жыл бұрын
very nice job.. :)
@peeyushsingh509310 жыл бұрын
great job.. i am seeking for projects as ATV, and Solar vahicle etc. i have a team and we'll do it well asap.
@KeithFenner11 жыл бұрын
I will have to look on my computer inside to the real title, but a melody loop by Keven Mc something I'll get back to ya! ;{)----
@stanleyrodgers337511 жыл бұрын
Cool, another series! First time I've seen you use a cutting torch, glad to see having the plasma cam didn't make you get rid of it! Really looking forward to this series since I've never seen line boring done in the lathe before. Quick question: How do you work it with your customer when you need to buy special tooling, like a boring bar, for their project? Is the entire cost added to their bill or is it shared, assuming you own the tooling after the job is done?
@desalvo669 жыл бұрын
stick a disk neodydium magnet on the end of your measuring tape. helps out a bit..
@Branistar11 жыл бұрын
23:30 i mark it with chalk, works every time :-) but centerpunching seems also cool
@KeithFenner11 жыл бұрын
Thanks for the comment! ;{)-----
@KeithFenner11 жыл бұрын
Later down the road I may have a course video on heat straightening my take ;{)-----
@millomweb11 жыл бұрын
There are so many 'naughties' it wasn't worth commenting on ! He'd soon be kicked out of work in the UK -with lack of chuck-guard, goggles, safety boots, polishing with emery in the hand - yes, we've all done it and still do/would !
@1963Franksworld7 жыл бұрын
pmailkeey thats why we yanks all left europe and never looked back. if you want regulations the try on our epa , osha
@algae100011 жыл бұрын
Great videos! In the beginning, you show some torch marks that you used to take out some warp. After heating it, do you apply pressure in order to make it move into alignment, or?
@VitorCardosoItu11 жыл бұрын
Parabéns, ótimo video, tanto lixo na internet mas deves em quando acho alguma coisa interessante.
@TECHNO_TURK11 жыл бұрын
nice machine :) you can make a V12 krank shaft with this