KEL-TEC PMR-30 All In One Bundle - Custom KEL TEC PMR 30 Upgrades & PMR 30 Accessories by M*CARBO!

[@MCARBO]

NEW 2021 PMR-30 BUNDLE VIDEO HERE! kzbin.info/www/bejne/lV6ylYWDZqqokLc

[@47Edge]

Very well done! Clear and easy to understand with no stupid music. An outstanding video that shows the quality of your products!

[@tdh72]

amen to no stupid music and Graphic distractions!

[@brianivey7749]

I just fired mine after the upgrade, and let me tell you, it is worth it. it was finally a joy to shoot, with out ANY issues. I would actually consider it for conceal carry with the 30 rounds, that's a lot of stopping power there. Thanks you MCARBO.

[@notimeforjokes.3570]

Good deal

[@barryreid2086]

Thanks for saving my sanity. Traded for one of these and couldn't even feed first round. The reason, the buffer was so melted, it was jammed all through the slide. Ordered the all-in-one kit from MCarbo, and 10 buffers from KelTec. Can't wait to see how this thing runs when I get everything replaced. Thought I had just traded for a lemon, now I know I'll be able to make lemonade.

[@-Agent_47_]

Did you get it already? If so how the functionality of it? Would you ever consider it for self defense? And is this worth the price?

[@leoashmore1971]

A new and improved buffer would be greatly appreciated.

[@robertallen1665]

Amen to that!!

[@rogerl8488]

Yes!!!!

[@matthewmramor5981]

Icing on the cake!

[@QuantumPyrite_88.9]

A 4 axis CNC machine and software is 30 feet behind me .

[@DA-zh9gi]

Nice two stage would be cool. Mini armaspec type...

[@13letsgoredwings]

Do The Buffer! You went this far Chris, now take it to the end zone! I just installed the feed ramps and mag releases on my pmr/cmr and they are works of art.

[@23bdubballa]

ok so it does work for Both, Thanks for that info , I didn't see it offered for the CMR knowing that it was the same weapon but i wasn't sure

[@pwrplnt1975]

I still can't believe Kel-Tec put a plastic feed ramp on the PMR 30. What a great bundle you guys put together! Great Video as well!

[@mfholz]

Using KZbin to repair or maintain just about everything from clothes washers to firearms. You are by far the best on showing and explaining what’s going on. So many time I am yelling at the computer “MOVE YOUR FINGER” or “show me what you just did” or “turn on some lights to show what you are doing”. BRAVO! Well done, I will be looking for more!

[@stormtrooper88]

the overtravel screw...have the threaded hole completely thru the trigger so it can be adjusted from the front so you don't have to disassemble the weapon to adjust it.

[@levmarcus8198]

Thank you so much for including an extra tiny piece of wire in the new recoil springs. At the last second mine bounced off my thumb and was lost to my floor for eternity. I spent about 10 minutes looking around and using a magnet to try and find it. When I returned to my desk I found the newly included wire in the bag. Awesome job guys! Thanks for thinking ahead.

[@Khaymen223]

As a machinist who does alot of finishing, I can verify that doing finish dremel polish work is relaxing. I start to nod off sometimes at work lol

[@SgtRudySmith31bRet]

Just completed my install , and I'm impressed! 4 mags and ZERO malfunctions. Time to order one for my CMR30.

[@danswalledin5829]

Did all upgrades as directed in video. First mag had one stove pipe. Second had zero. Thank you MCARBO! For the first time in a few years that gun is finally fun.

[@bertshelley2703]

DEFINITELY do the buffer please. And the little wire spring clip...

[@deplorabledave1048]

They did! Here it is. I just watched the video on it. MCarbo freaking rocks!!! I love the owner, Chris. What an amazing human being. VIDEO>>>>>>>>>>>>>>>>>> "New KEL TEC PMR 30 Upgrades Just Released! First Look at KEL-TEC PMR-30 Operator Mount! M*CARBO! 304 views Jul 1, 2021" kzbin.info/www/bejne/nJyxgXypdqijp8U Precision CNC Machined Peek High-Performance Thermoplastic Replacement Buffer that won't Melt or Deform under intense Heat & Pressure! Will outlast the factory buffer that melts. PEEK High-Performance Buffer can Take the Heat and Handle the Beating! Will maintain proper buffer thickness to ensure reliable cycling operations of the PMR-30. PMR-30 Peek Performance Buffer is resistant to chemicals and continuous operating temperatures up to 480° F. Precision CNC Machined 6061 Aluminum Replacements for Factory Plastic Safety Selector Switches Left & Right Aluminum Replacement Selector Switches Included in this Kit. KEL-TEC PMR-30 Operator Mount Coming Soon! Frame Mounted to ensure reliable operation of PMR-30 and Accurate Zero of Red Dot Optic. Mounted just high enough to use Fiber Optic Iron Sights and low enough to easily transition to your Red Dot Optics. Mount Position allows for a more balanced PMR-30 with a full magazine Avoids adding additional weight to the PMR-30 slide that will slow down the cycling operation just enough to induce Failure to Feed Malfunctions. No more PMR 30 FTF Malfunctions. Fixed the problems... now let's get a PMR-30 M-SERIES that will run right out of the box like a well-oiled machine! PMR 30 Mag Dump Action!

[@therajuncajun6487]

Dayum! That speed dump was exhilarating! I definitely want to buy one and get all of those enhancements to install!

[@chrisrock4428]

This is so awesome. I've been wanting a PMR 30 but reviews had me on the fence. This seals the deal.

[@michaelwilson6743]

I have one an conceal it i love mine !!

[@CLP2102]

Buy one and this kit, mines awesome

[@joehelvey5794]

I’m in, thanks fellas

[@mikerobino5986]

I've not had any issues with my PMR although I've only put about 500 rounds thru it. But I wanna buy this kit just because of the way this dude talks on this great video. And seriously....how many times do you see guys handle mistakes rather than editing them out.

[@thedicklife]

I have over 2000 rounds through mine with zero malfunctions. Love it.

[@therajuncajun6487]

Thank you for the in-depth video! Now we need a video of the gun actually functioning with some hollow point rounds!

[@satanlucifer8492]

They have a video shooting flat nose

[@DeanPatterson-j9q]

This is the package I got with MCARBO and definitely made it a new gun. Shoots perfect, it’s light and accurate. I have also bought many parts , mainly lighter trigger springs and such for many shotguns and rifles I have . Love me some MCARBO. ❤

[@jerryburcham3370]

This video made it extremely easy to install this upgrade. I really like the feel and smooth operation of my PMR 30. I will be on the lookout for other upgrades in the future.

[@davidmills9748]

I love my pmr 30, can't wait to get some up grades, however as long as you only use full metal jackets it works fine the way it is, but who wants to just do that when there are so many other choices

[@robertovillarreal8602]

Just what the doctor ordered!I need 2 sets.Who knew.👌

[@wilstandridge7388]

FLITZ polish included in this package is really great stuff,I polished an all satin guitar with this stuff, it came out awesome, great stuff.

[@rickygentry4417]

Good for percussion cymbals to

[@jdisdetermined]

Flitz polish is amazing, safe and very inexpensive. Their Powerball drill attachments are great too. I'm a professional detailer, I have endless polishes and tools on hand, and I still reach for the Flitz regularly. You can even use it on glass to get rid of water spots. 👍👌✌

[@CLP2102]

i'm one of the rare few that hasn't had any problems at all with my pmr, i'm still buyin this kit tho, seems like cheap insurance for what i consider a fantastic weapon

[@timmyburch9126]

mines been rock solid never had a malfunction that I can remember in 500+ rounds

[@lisaclearwater7544]

couple thousand out of mine only problem is bolt hold open while one round still in the mag. has happened 3 or 4 times

[@solidtv6211]

Almost 500 rounds in with no issues on mine

[@ctamarack5229]

When you said, "Hot brass down muh shirt" you sounded like Jerry Miculek!!!

[@BrassCatcher]

Enhanced recoil spring for the cp33! I would even settle for a forward assist! Thanks for the feed ramp, you’ve earned a repeat customer.

[@goodoldjam]

Just did this and a couple notes. The mag release screw/Stud was reversed on my gun. The hammer spring pin popped off and even though the hammer was forward it dropped back. So I needed to get the hammer back up which was simple. Just make sure you work on this in a area where if a part flies you can find it, I almost lost the hammer spring pin. My kit included a 2nd wire for the slide spring. I also did the slide lock upgrade which included 2 extra screws. The only hard part was the recoil spring wire which I saved because I didn't see the new one. Great video! I have a torque screw driver and the factory screws seem to be torqued about 3in lbs.

[@therajuncajun6487]

Definitely upgrade the buffer so that we don't have to go through the Meltdown process and have to wait for someone to make it letting our firearm catch dust!

[@wilycoyote9091]

Just another example of where Kel-Tec goes the cheapest route for the parts in their guns. Don't know how hot it gets there if you rapid fire a couple of mags, but the engineers should have anticipated owners doing something lke that and designed a part capable of withstanding a lot more heat than 60 rounds of rapid might produce. Big mags invite rapid shooting, sort of brings out the Rambo in you.

[@therajuncajun6487]

@@wilycoyote9091 lol yes sir!

[@hulkhogan4383]

Like to see the improved buffer and the recoil spring wire replacement, we know what gonna happen with that if were not careful. Would be nice to be able to stick the whole of 50 box count in to a mag but this kit upgrade is awesome!

[@sjwhitney]

Should be a simple mold extension to make a mag that will hold the whole box of 50. It would add almost 3" to the mag, 2.5 for the ammo space and another .5" for the extra spring length.

[@DA-zh9gi]

I can tell you've done this a gazillion times. Nice job. Much appreciated on the tips and details.

[@leonardkinsman8969]

Two yeats late but yes, include. When I finish my Sub I’ve got to deal with my PMR… So Thank You Chris for the hard work…

[@13letsgoredwings]

I love the extended Mag idea. A mag that holds a whole box of ammo would be epic. Of course the buffer. But I'll also throw out the idea of an extended rail for the cmr30. That be pretty cool.

[@jakegarrett8109]

I think at that point Glock might have this beaten (you can get drums for Glock, and I’d say a normal magazine is 33 round stick mag at like $15 or less). The cool factor of this PMR30 to me is that it’s normal size, no extension, otherwise you might as well get a calico which comes in the lowest capacity of 50x 9mm and their standard capacity is 100x 9mm and of course works on their pistol, (but it over doubles in its weight when loaded). They also make a 100x .22 rifle so if the NFA was unconstitutional you could of course bear that arm however you saw comfortable and have a pistol in a cheap plinking caliber with a bunch of ammo. I don’t know, ruins the mainstream clean look to me if it’s extended mag since there are so many options for common pistols in lots of calibers, it loses the nice aesthetics and would just be like a normal handgun with extended mag to me. Not that I’d ever complain about a gun having too adequate of capacity (I’d rather have 50x too many bullets after a gunfight than 1 too few).

[@13letsgoredwings]

@@jakegarrett8109 Looks wise it be funky on the handgun, but on the rifle it be very practical/tactical. I got plenty of Glocks and fun sticks but I don't trust the Korean products. If only Magpul would release there promised drums.

[@jeffvozeh1091]

i just bought the pmr30 kit and installed it. I sent the guide rod spring to M*CARBO to install because i lost the first clip and washer and it drove me crazy. It was $35 with shipping both ways , well worth it to me. Makes it a great reliable fun gun to shoot. Reliable now to even consider for EDC. I also bought the M*CARBO m series sub2000. Makes a novelty type gun into a reliable, great shooting weapon. . The sub2000 shouldn't be sold without this complete upgrade. Please put out the improved pmr buffer.

[@fredhoward5962]

Yes, yes, yes on the non-melting buffer. Also, I know you only need it once (hopefully), but an improved spring retainer for the recoil springs would sure be nice and not that big a deal!!!

[@johnceglarski9460]

Great job on the video. The lighting, views, and sequence explanation are beautiful. Especially the slide stop. I had trouble after I got both sides reassembled but noticed SOMETHING wasn't right. The slide stop had come off its base and it is very hard to realize without seeing the explanation/lesson you have here. Thanks again.

[@kenjohnson3412]

We need a improved buffer!!!

[@ericanewalt4009]

MCARBO is the BEST!!...Excelent quality parts and you come out with state of the art ideas ...

[@alonzohall9561]

I’ll be looking forward to ordering this stuff once my sub2k stuff comes in and gets done. Can’t wait to have the p17, pmr 30, cp33 and sub2k running great once I’m able to make it to the range. Would like to see the buffer replacement just for peace of mind. One less thing to worry about.

[@SouthernShodan]

Looks good. Thank you for the detailed installation steps. Just ordered a kit from you.

[@StevePetroski]

Please make an aluminum buffer. Also I just bought my all in one kit and can't wait to install it. Great video too. I feel much more comfortable after watching this. I'm really looking forwarded to this upgrade.

[@dr2casto]

Just finished Trigger and enhanced mag release, works fine testing tomorrow…. Will now do it again for feed ramp which I “FORGOT” to put on my order! Going to add Alum safety levers also.

[@RowdyRory]

Very nice. Thanks for the video. You really have a talent for teaching. Wonderfully clear. Ya gotta do the buffer and that extra wire thingy.

[@MillennialRebelion]

Mothers mag and aluminum wheel polish is the possibly greatest polish there is for cleaning up machining scares and flashing. No. 7 works really well to.

[@johnwilliams640]

All you need is a good speed loader I bought one on Amazon. The gun works perfect now.

[@gregorycombs2527]

Best video I’ve seen on gun repair

[@fancyultrafresh3264]

Random youtube confirmation review: These MCarbo accessories make it run like a clock. Absolute recommend to anyone who is on the fence.

[@MCARBO]

Awesome! Thanks Brother

[@phyuckyiu7685]

The upgrade is awesome, love this pistol now! Installed in October 2020!! Thanks MCarbo! And Ya-Huh please on a new buffer!!

[@2CabrasLocas]

JUST bought my PMR-30 today and want to THANK YOU for all the effort you're putting into this great little gun and these mods and videos!! I want to break it in stock with one trip the the range. But will be ordering some goodies SOON!

[@TheXV1CT0Rx]

As for the buffer....from a business standpoint I wouldn’t need to be pushed to make more money. Make the damn buffer already. You keep us happy and you make money

[@Vision-yg5oc]

I melted the buffer with two or more mag dumps and then it broke the take down pin in half! Luckily keltec was great and sent me all new parts for free. I own two pmr 30s and will be getting this kit for one to try out! Thanks

[@baltsosser]

I've fired a PMR 30 before. Really nice and accurate.

[@azrael3030]

It's kel tech your lucky if it fired

[@arecansawhillbille4463]

Oil and grease, runs perfect

[@briancurry2659]

For the buffer melting issue. I would recommend making a mold of a factory new buffer and then trying various consistencies (density) of silicon to achieve the buffering effect while allowing for a higher temp tolerance.

[@de4md686]

Hello. I bought this kit from you, and I must say, I am elated on the difference this has made. My pmr is a runner now! Night and day difference! Finally I can rely on this firearm. As for the buffer pad issue, I highly suggest making a silicone replacement, as the silicone will not melt. It would perform very well, would be easy to clean, and very cheap to manufacture. Thanks again!

[@danraup6089]

And here I am like one or two parts short....coulda shoulda woulda. Lovin the PMR30 now that it's broke in and up-parted. Had best day so far today with my CP 33 too. About 500 rounds, very few issues.... mostly with "wrong" ammo anyway. Action really smoothing out. And yes, I'm expecting some new stuff next Tuesday for it. Great fun to choot! And, most importantly, I am happy to support a company like MCARBO. Us Army 83-87, Support of Big Red One, Ft Riley.

[@mguerrrero]

Definitely buying this. Also definitely need a better buffer and also a better firing pin. Then release it as the "all in two" bundle

[@jimdaniel7297]

MASTERFULLY TAUGHT . ALL MY ADHD BRAINPARTS ACTUALLY FOCUSED ...

[@dwayner6597]

Thank you for the great video, I purchased the upgrade kit but had to wait until I could get a second pmr since my pops will not give my first one back. Lol I would love to see and upgraded buffer. It is way to hard to quit pulling the trigger to let it cool down. I just saw the video on the wrap around grip so now making another shopping list. Thank you for a great product and great service.

[@AntonioCesareMatteo]

Why doesn't Kel Tec just make all these fixes and re-brand the pistol as the PMR -30 Tactical and discontinue the old model.

[@timdietel9797]

Amen... KelTec needs to get on it

[@lancefarnsworth8089]

I do not own a PMR-30 I always like to concept I'm having 30 rounds but why do they not have a choice have been able to buy this pistol complete I don't know too many people want to screw around with a kit I think I'll wait to buy a PMR I love Celtic but I'm going to wait till I can buy a PMR complete thank you

[@lewstherin826]

Its all about cost over production. If they do everything Mcarbo does they drive up the cost, slow the production. All that kills the price point and profit margin. Personally I take great satisfaction from doing my own upgrading, MC just makes it easier.

[@wilycoyote9091]

@@lewstherin826 Profit always drives the ship. By the looks of all of the molded and injected plastic parts it would seem that the real costs were in the orgininal R&D and now cranking them out in volume has to have recovered all of the development costs a long time ago and they're sitting in the sweet spot of low production cost and high profit. Kel-Tec likes to inovate but ends up going low ball on the materials. A stock Sub 2000 is a great idea made as cheaply as possible, but then a niche market has opened up for an outfit like Mcarbo to come up with quality upgraded parts that vastly improve the product. As long as Kel-Tec is selling lots of them and making money it would appear they're happy with the status quo, besides a "tactical" model with metal parts would be an admission that they used cheapo plastic where everyone else uses metal. I look at it from a total cost standpoint, how much extra does it cost beyond the purchase price to get it working the way it should have been from the factory versus buying something else. In terms of the Sub 2000 there just isn't anything else like it, but it needs a bunch of upgraded parts to improve it and make it relaible over the long term which drives up the cost of ownership.

[@lewstherin826]

@@wilycoyote9091 That's a FACT. I am in the middle of polishing a sub ATM... Starting with the Bolt, bolt head and receiver. bolt is almost ready and super slick. Smooth action mean everything to me. And doesn't cost be a few pennies and time.

[@darylSKYTZOwillis]

Very good detailed instructions 👍

[@troy9er]

I love polishing too. All my feed ramps are super polished!!! My local Hardware stores aren’t carrying Flitz paste any more! 😡😡😡😡 they have Flitz, but it is a watered down version.

[@dcrump]

Wow.... I just recently heard of this pistol and have to say I’m excited to purchase a 22 💪💯💯

[@lexingtongreene400]

Love the excellent video that "fully" demonstrates the upgrade process. I have a PMR-30 which has been fine but can say this would be a huge plus to its operation and enjoyment. Haven't melted the buffer as I don't high speed it. WMR isn't the cheapest round, but the buffer enhancement and the replacement spring retainer in the kit make sense. I will shortly be buying one of THESE upgrade bundles FOR SURE!

[@okcrn361]

YEAH! Like it. Please to the buffer and guide rod clip. I'd actually like to see a replacement guide rod and e-clip

[@95sporty1]

Just received bundle for my pmr 30 I was going to pay a pro to install but honestly after just watching this video I’m going to do it myself thanks for the very informative video now wish me luck!

[@Tencargo]

My kit is in transit. Yes. A better buffer is a must and additional recoil spring circular clips. I’ll buy them to add to my gun.

[@rdiehl7809]

Great job. Great fix. Great person doing the video. Really better than a college class. Thank You. Planning on purchasing pmr and cmr. See you for your all in one bundles.

[@tommylane8878]

Great long, long, ....long video. Extremely informative. Great walk through process.

[@deschannel300]

Yep, I've melted a buffer before. I found the replacement easily on Kel tec's site and it was here in a few days. But Y'all need to come up with something that'll last. It seemed to melt pretty quickly. It's been a while but I remember being surprised how few mags it was in the dump before it malfunctioned. By the way, love Mcarbo. I live in Dunedin and have been to your shop. Y'all did the full Monty on my Sub-2000. I just bought PMR-30 kit.

[@forevercontrarian3517]

Watching and listening as I post. Impressed by the thoroughness of this tutorial. Heck, not sure if doable but I would prefer to send u my 30 and get this done. I have found though that using the Federal 50gr and mine seems to fire flawlessly. The trigger , also, seems very soft already. Still, improvements to any firearm are always welcome. Super post! 😷🍀🇺🇸⛄️

[@Chopper-nz2jq]

Great "How To" video!

[@sjwhitney]

Regarding the plastic buffer at the front of the gun that keeps melting with heavy use --- This would be best replaced by a formed piece of high temp Teflon such as you would find used in steam fittings of hydraulic cylinders. Some of the steam fitting (packing material for valve stems) Teflon is actually rather soft and would provide a great cushion and resist the effects of the heat greatly. My observations on installing the kit: 1. When removing the retaining ring wire from the slide spring assembly, it is far easier to hold the springs compressed when the assembly is still in the slide. It's sort of an even wash when trying to reinstall the ring. It is a little difficult to insert the spring assembly into the slide without them being captured by the ring but reinstallation of the ring is much easier because the compressed slide assembly is easier to hold in your one free hand. 2. I found it much easier to get the slide lock lever spring back into place by letting the lock lever's open C foot off the post so you have less to push the spring and it's more in the open. Once the spring is in the hole it's and easy small push to move the C foot back over the post. 3. With the two halves separated, I had no need for the alignment pin for the mag release spring and new release button. I simply made sure the post remained with the working half of the gun assembly and just popped the new part right in and held the spring with my fingers. I only had to chase it once... ;-)

[@corysornson8890]

Yes. Great video. Please include the the little wire ring and better buffer in the all in one kit!! Guys will thank you a million times!

[@raefordguns8243]

Rockin' the Skilcraft staple remover, Nice!

[@cb750k1974]

I don't have one of these guns but I was mesmerized by the video and how easy it seems to do these upgrades.

[@chriscarnes87]

Yes and add extra wire with Guide rod springs, and sale a pack of them

[@scudzuki]

The mirror finish on the feed ramp looks impressive, but I always polish feed ramps in the direction the bullet travels.

[@dancarbone7798]

Outstanding kit! I never had the misfortune of firing a bad PMR-30 because I installed this first. Took forever to install though...20 minutes to put the parts in and 3 hours looking for the damn retaining wire on the floor. Haha! Gun fires GREAT and accurate! Love the adjustable trigger. Buffers please, and thanks for a great product!

[@hokiecolt8107]

An improved buffer for the CMR-30 would be awesome! Thanks!

[@scottbatey3130]

I'm always biitchin; but I LOVE KEL-TEC. You guys are great!!! I'm just old and grumpy,,, he he he, so please keep up the good work!!!!

[@christiangray3304]

Just stumbled onto this. Definitely going to invest!

[@barryreid2086]

I finally got my kit, and can't wait to get to the range. I think a new buffer would be a great idea, but what about just including a whole new guide rod with the spring kit already installed? Would definitely be worth a few more $$ to be able to drop that in. Just a thought.

[@chriscarnes87]

Make anything you can think of for it and it will sell. Better buffers would be good, and a slide cover with better rear sights. Like adjustable.

[@STAYFROSTY1776]

👍👍 great products I'm buying more

[@ZChaosFactor]

One vote for you guys making a non melting buffer.

[@duanehenicke6602]

That little wire on the quide rod is a pain. New fully assembled rod with spring would sell.

[@anthonylewis9055]

i'll probably have to email chris at his office, take up his valuable time just to tell him.... "where's the buffer chris?" but let me tell you this all in one bundle is the bomb!! quality thru and thru!! i'll let you know of the results later, right now it's about the upgrade.

[@hankjones9212]

You have the most informative videos in KZbin history

[@JoJoJoker]

This is a fantastic pistol when it’s running right.

[@ericbergfield6451]

Hell ya! An all in one bundle, I can't wait to get a PMR30 soon and upgrade it to BOSS level awesomeness!

[@chriscarnes87]

A Flash enhancer would be awesome 😎 because how doesn’t like a bigger fire 🔥 ball

[@TerrySprey]

Do the buffer, I installed your bundle there were a couple of tricky parts but over all went great

[@jamesritch5245]

Picked up my PMR-30 yesterday! I want that 5 inc barrel tho lol

[@paulpawlik2105]

Agree with the improved buffer. I'll be the first in line.

[@ripcord8823]

Excellent video👍🏻 We definitely need to improve that buffer. Thank you.

[@kotklegg3367]

PLEASE MAKE AN IMPROVED BUFFER!!! Is it possible to make a buffer out of material that don’t melt? You guys do a great job! I got the entire kit for the Ruger LCP 380, and this thing has never worked this good since I bought it! Keep up the good work!

[@chriscarnes87]

Extended mag, because 30 rounds just isn’t enough 😂

[@TheXV1CT0Rx]

Weld two mags together and find a longer spring. Doesn’t look to hard. Some guy did it for his CMR30

[@solidtv6211]

Now we're talking

[@pinkflower313]

Extended 50 round Mag Would be good with the PMR and CMR

[@creightonleerose582]

Buzzed one of my mag followers down & IIRC can squeeze >3 MORE< in the mag! Figured Id have some function issues but havent had any as of yet with the mod'd PMR-34!.. Usually load em to 25/26 anyway... "Fixed" the mag release on my PMR & CMR-30's by digging around in my 1/35th scale military model spare parts box & epoxied a 1/4 inch high "Half Moon" piece around the top of PMR30 mag release to inhibit accidental mag release....-Kindve akin, but opposite in function to the TandemKross PMR30 Magazine bump/base pad offering which protects mag release from the bottom VS the top...sure, it may look janky, but I prefer function over looks as its a carry piece. Doesnt affect grip/shooting whatsoever... Used a "Dragon Models-1/35th scale Jagdpanzer IV Assault Gun" mod'd cannon mantlet-(The part that interfaces/welds directly onto the tanks glacis plate as it has a two part mantlet)- Such acting a mag release cover on the CMR-30. -If ones hand isnt choked all the way up on the grip one can easily hit the mag release w/the meat of ones palm due to different weight distribution in comparison to the PMR30...Both have been "Fixed" & have had rough use & are still holding strong.... ~Epoxy, zip-ties, bailing wire, duct-tape/hippie chrome, painted over rust & hope being the chief things that hold this old world of ours together.... The additions dont seem to bother me or my shooting one bit, Im surprised KelTec hasnt made such an addition next time they have to change their injection molds out? -Just a little upside down "U" rim around em would do the job.....Im sure some people would whine though?....

[@tommylane8878]

Lmfao!

[@Tencargo]

I just completed the kit except for the spring. I didn’t want to mess with the cheap spring clip. Yes. Design and offer a better buffer and spring clip, the gun is unique and fun. However, these and other upgrades are needed to move this from a novelty gun to a real sturdy firearm.

[@adaboy4z]

I have not had any problems with my PMR30. Bought it used/new at local gun and pawn. Now when I changed barrels to aftermarket longer barrel it had horrible feed problems.

[@eugenewhistledich5426]

adaboy4z ......Excel Arms makes a 22 mag with an 8.5 inch bbl in stainless, or blue steel. The ‘Accelerator’. The magazine only holds around 7 or 10 rounds.

[@richsellskc]

I wore out the cheap buffer and replaced it with a piece of stiff rawhide then lubed it up to make it pliable. works great. Just buy a cheap leather punch /plier tool and you can form a nice buffer making sure the leather is the right thickness as the stock buffer. Made a few extras as back ups....or, you can buy the cheap buffers from keltec for $2 each plus shipping...etc.