How To Make RC Trainer Airplane. DIY Model Airplane For Beginners

[@ChickenPotato.Chitato]

My dad recently told me that he missed his old collection of model airplanes so I’ve started trying to make him a few! Thanks for the tutorial! I’ll be watching this a lot lol

[@CardZed]

You seem like a very good son/daughter. Good job!

[@Onealcasamis1996]

snail

[@ChickenPotato.Chitato]

@@Onealcasamis1996 snail

[@depenetrator310]

@Aron Zakai nice try

[@briannajames4274]

Hello

[@user-lh4je7yg7m]

One of the first planes I built when getting into the hobby of scratch buiilding. It's truly a great trainer for building and learning to fly. Thanks for helping us out.

[@KubuzaAbe]

Hy, your comment really interest.i leave in Nigeria precisely Taraba state,i need those electronics to build my owned,pls help me out.

[@dalemckenzie9394]

This video rekindled a long lost fascination for flying model planes , at 68 I will begin again and who knows maybe some of my grand kids will come on board. Thankyou so much.

[@michamachlanski7095]

I built it and it flies amazing, thanks

[@salmankhan-ek2dj]

Plz tell me where you get the materials and list of materials required for this plane only

[@hassanulhadi1335]

@@salmankhan-ek2dj from the description

[@kerimakdeniz9165]

How much does it cost ??

[@kerimakdeniz9165]

@abdul bari ok thanks

[@Kula88443]

Where do you get the receiver and levelators

[@johnmichaelvoss6194]

Very nice. Amazing how inexpensive it is in both material and workmanship, yet it flies flawlessly

[@LazorsGD]

it's quite expensive

[@muhammadyakubu1919]

Quiet expensive bruv. RC plane hobby is an expensive hobby

[@ludwigsnihonto8757]

Yeah currently building it it’s like 70 hours 200$ in

[@ludwigsnihonto8757]

But lots of fun

[@briannajames4274]

Hello how you doing?

[@Nothsa-mt4yo]

You are actually a legend, this is one of the best DIY videos I've seen in general. Very thankful for providing diagrams and the parts list in the description!

[@sean7058]

This is as good as flight test i like the measurements highlight in the video thats great

[@someone.-_497]

What's your age

[@alexanderange]

@@someone.-_497 your mom

[@peruccaeditz]

@@someone.-_497 Why asking?how does it relate with the subject matter?🤡

[@keshabchowdhury8243]

Ke ke metarias lagbe. Amio try korbo

[@mehdisy3d]

Who the heck would want to downvote this?!! Incredible job building and flying this and thank you so much for sharing!

[@sunitagupta8601]

This is the only RC plane guide that is complete My RC plane could not have been possible without this thank you a lot for making this.🙏😃

[@abdulhadialamri4859]

I made one after seeing this and it flies. It is the first thing that I built myself. Unfortunately, it was getting dark and I didn't know exactly where it was heading and had it stalled and crashed. Luckily, there was lots of sand that it didn't totaled. A new propeller and some hot glue and will be ready. Can't wait to fly it again. Thanks for creating this beauty 😊

[@furkanerdal.]

How long does it fly?

[@jacksampson7711]

Wow!!! This is a great build. Seems very simple and straight forward. Plane looks great. Love the landing gear.

[@ammar_arain]

Thanks for helping me make my first RC plane that works! My first plane was a delta wing, didn't work because the wings were too small, then I tried your design but made it 1.3x bigger and tested it twice, it flew both times but I only flew it for 5 seconds the first time and 10 seconds the second time since I never flown an RC plane before. Thanks again for this amazing video!!!

[@randomcat201]

How much did itvtake

[@ammar_arain]

@@randomcat201 The transmitter and receiver were around $75, motor was $15, foam was $3, pack of 4 servos were $5. So a little over $100.

[@randomcat201]

@@ammar_arain damn

[@pescetv8371]

@@ammar_arain yo, are all the parts in the description or are there extra parts? How many wheel stoppers did you need?

[@ammar_arain]

@@pescetv8371 All the parts seem to be in the description. I didn't use any wheel stoppers because I didn't have any available so I just cut out a piece of foam and stuck it to the end of the rod (a pretty bad way to actually do it). But 3 wheel stoppers should be enough for this design.

[@andymunnings9109]

"Before I say anything, I want you to know? I Greatly appreciate you. Would you believe? This was exactly how I was one time ago. I always use to take my time and construct model airplanes from foam board and fly them when they are completed. We share the same interest. I love how you measured the center of gravity in relation to the battery's pitch for easy control and stabilization of the aircraft. Your project was a good flyer. It is good enough to market and sell at a profitable rate due to the electric easy start system. I would like to be friends with you, we share common goals. You are a great builder. It was simple, but? It was done properly; That was the achievement due to success." Good, Job! I appreciate you. 👍

[@dlboarman]

Wow, super job showing how to do this and particularly providing a complete list of where to find everything!

[@Ephraim610]

I have a question how does he get the servo working without a receiver do you need a receiver for servos to work?Thanks in advance.

[@Ephraim610]

Oh nvm

[@Saiteja-bg9gj]

@@Ephraim610 see the video he connected the servo to the receiver

[@thesocialistmind9880]

Finally a plane which doesn't need 3d printing, cheap and top-notch quality. Greetings on behalf of India!

[@bekodevs1793]

You can buy a cheap 3D printer He is so useful

[@matix4668]

@@bekodevs1793 *it

[@AavegS]

This is one of the best DIY airplane I have seen

[@georgewere100]

Man when the camera captured the wheel in take off and landing.. that was soo satisfying. Am going to try this out.

[@ushamannam8961]

Not only is this a very good video, it might as well be the most affective asmr vid lol

[@laurencesun_]

This comment is what I was expecting

[@argonaut6386]

Fantastic clear video. I used to fly glow fuel planes as a youngster and would love to have a go again. This looks ideal but it does look a bit fast for my reactions learning again 👍

[@jojoseph22]

Love your RC planes builds ❤️❤️ a lot!! And I'm trying to make one 😁

[@epiaduk5234]

0

[@epiaduk5234]

00

[@ahmadnawaz7006]

Lbbj

[@ralphfrasier2079]

Nice project for dad and the kids! BTW Great looking flying field! Thank you for sharing................

[@garymullenTube]

Thank you so much for the instructive video. This is the first plane I've ever made from scratch. It was easy to build and it flies great!

[@leossmallengines]

Typical Ryanair Landing 0:13

[@Lenny_123-o6p]

Lol

[@see_it_through_my_eye]

Omg! Your skill is next level and you say this is for beginners 😅 Very gracefully done airplane buddy!

[@rodrigonagrampa]

Hahaha I think for skillful beginners....like me I am new to flying rc planes actually I do have a 2 channel beginner plane and with 3 or 4 times I have flown my plane....and saw this video....I am interested in building my own plane and this is a very good tutorial and very informative approach for creating a diy plane....I want to try creating a 3 channel not much advance like the owner of the video. But indeed he's very skillful and a genius!

[@ALPHA_-]

@@rodrigonagrampa i would reccomend getting a rtf one first, like the sport cub s or 500. They have 3 modes and pre-built gyros and are easy to fly

[@echolee1197]

Saya senang kamu mau memberikan pola beserta ukurannya.jadi orang lain bisa belajar dan pintar membuat pesawat mainan untuk anak"nya AWESOME GOD JOB 👍👍👍

[@nirmaln5684]

I was looking for something like this . Video with measurements . Thank you from Kerala , India .

[@patrickprakash8]

Malayali da

[@Visalvyasan]

chumma poli

[@joyalpjoy8830]

Pinnale

[@ViShNu_K3]

Mallu pewer

[@politecat3299]

Dhe malayalee

[@ถามมันทีมันมีดีอะไร-ฬ9ฑ]

ชอบช่องนี้มาก สอนละเอียดดี ดีกว่าบางช่อง ห่วงวิชา

[@ulurucota8058]

Best rc aircraft I have ever seen for now. Congrats

[@matthewforan6397]

After building (and crashing), here's my beginner feedback: The wheels aren't worth the effort. If you do include them, make sure your wire is strong. You should also include some velcro or something to hold the battery in place. Every time after launching or landing my CG would be in a different place because the battery slides.

[@logiknotlogic6586]

Hey im planning to buy a 1000kv motor. What is the best battery for it and prop size? Also how long will I be able to fly with that battery?

[@matthewforan6397]

@@logiknotlogic6586 I used the recommended parts from the video. Flight time depends on a lot of things, including how "hard" you are flying. Just use a low voltage beeper so you know when to land.

[@logiknotlogic6586]

@@matthewforan6397 Ok but can you tell what prop size you used as Im extremely confused on what size to use?

[@logiknotlogic6586]

@@matthewforan6397 Will a 10x4.5 prop work well with a 1000kv motor? And using a 4S battery at 2500mah will give a lot more flight time than 3S with 2500mah?

[@matthewforan6397]

I just used the ones the video recommended. There is a parts list in the description

[@Doomguynowaying]

My brother and me now have 2 planes😊 thankyou for this great tutorial and the technics used are very nice❤ we cant wait to fly them

[@AeroDesignRC]

I think this is one of the best tutorials for building a rc plane, congratulations! Keep it up!🔝🔝🔝

[@kushanvimanka8323]

Absolutely fantastic 😍

[@nogluewall2574]

Most liked part of the video was BLDC holder 💯💯💯 and beautiful landing also👍👍👍

[@gustavoeverton5431]

it must be a lot of fun ... congratulations got too much.

[@Vallabhkarnekar_95]

Thanks it is awesome it was flying like a real aeroplane 🎉🎉

[@Ayush-lr3bt]

this is my first time on this channel i clicked on subscribe just after watching 5 mins

[@niltiwari380]

He could be lying

[@vittorioqwerty]

@@niltiwari380 the real question is: IS HE?

[@laurencesun_]

OMG SAMEEEEE

[@chaltonmumo2654]

I feel satisfied! No gimmicks no jokes.. it worked! Definitely subbing!

[@TysonRowley-c8g]

Looks great I like the way you did it building one now.

[@legendsoffortnite3835]

Best and simple plane to make and enjoy

[@smesui1799]

Abi, mükemmel olmuş ! 🇹🇷🧿 ... 👍

[@Gama_Technology_Arduino]

Slm

[@Science-bp5pg]

Best landing I've seen in an homemade rc

[@mickerdoodle51]

I love this. I hope to build with my grand son.

[@crazygamingparadiseff1603]

Thanks a lot bro! I am just a kid 10 year old kid but coz of u I could make my first plane that too in this age!!😃. Just need to learn how to fly though😅Thanks again

[@xdragclick2074]

i already got one, but i also want to make another (to drop stuff midair like a bomber)

[@titansito506]

hi

[@titansito506]

i want to do it

[@ManuelPetrosi-es7rk]

i am planning to built this rc airplane this video is very help thank you !! grazie dall'italia

[@michaelhickam7774]

Wow! Great trainer/ intermediate aircraft and build vid! FPV is just icing on the cake

[@MasboyRC]

Awesome !! It's so stable and flying perfectly. I really love your video footage on maiden flight, it's so beautiful sight of landscape.

[@freddykoopmans6985]

WTF, I did see the plane only fly at a high speed, andthat was to fast and too small for teaching any new RC pilots.

[@samwan8573]

Your creation and video are amazing.

[@jgreco]

So far, I have built two models based on your designs. They are amazing!

[@VMgeschwader4117]

@Richard 150$ maybe

[@lightbulb6802]

Great job! I love your video! Now it is much easier for me to understand how to make a rc airplane!! Great Job!!!

[@samrpitindianclassicalmusi2783]

Ha par electronic saman khaha se milta hai please tell

[@premlatapandey2532]

@@samrpitindianclassicalmusi2783 amazon

[@TythetankguyWT]

I'm very happy after watching this because everything in this video I was already going to do, it just reassured me

[@electronic7979]

Mükemmel olmuş. Elinize ve emeğinize sağlık

[@aeromodelisme45]

Très bien comme vidéo, bravo pour cette présentation et réalisation !

[@KJIaBogaB]

perfect!!! thank you from Russia!!!

[@senerumutsen4152]

inanılmaz güzel işler yapıyorsunuz . izledikce bu hobi merakımı gerceklestirmek istiyorum, birgün deneyeceğim :)

[@erdembulut7955]

o gün bu gün

[@shinej11]

Wow! I love it. You're quite a good pilot too. Thank you for sharing 😇😇

[@rustygaming5147]

Thats a hell lot of precision and perfection right there . Good job buddy 👏

[@tonyross1181]

Amazing build - Thank you for sharing it with us.

[@babumohan4549]

dear sir, the making of trainer is superb than flying.the bgm and other sounds are entertaining.thank you boss.congrats.

[@hobbycornerkerala]

Welcome to Hobbycornerkerala.

[@babumohan4549]

@@hobbycornerkerala hi pls mention your link.thanks.

[@JesseDunham]

I loved how I could draw my own templates on my foam board.If I tried to print them my plane would be so bad😂.Please do another one like this.

[@선풍기FAN]

I learned a lot from your video and was also inspired by your sensible production methods. Thanks~!

[@DovlandRally]

THERE YOU GO! :d

[@somkidnotesrisamai945]

good

[@melikbey2354]

Where are you from?

[@gokulkrish6703]

I never imagined that creating an airplane would be this much easier.

[@astrox9097]

You are actually a legend, this is one of the best DIY videos I've seen in general. Very thankful for providing diagrams and the parts list in the description!

[@astrox9097]

LoL i just copying to get u likes

[@rejanduka]

U

[@randywetzler5976]

Thanks for sharing your skills and expertise, you make it look easy! I'm in the process of trying this build and struggling a bit with making the wing. I couldn't readily source the Kraft type foam board. How important is the type foam board? I sourced some foam board, Elmer's brand 20 X 30 inches from our local Wal-Mart, $1.77ea. It seems to be of fair quality but doesn't seem to want to make the sharp bend around the spar as easily as shown in the video. In the video it looks like your just scoring through the paper on the 1cm spaced lines, is this correct? Maybe it just takes more practice to get the hang of it. Mine seems to break open as I'm flexing it around the nose of the spars, probably my cuts are to deep.

[@Kendin-Yap]

Kraft foam board is different from insulation foams. The outer surfaces is covered with paper (kraft type paper). In this way, it is more robust. And it is more suitable for bending operations. Insulation foams do not allow large angle bends. In this case, you can cut the lower and upper surfaces of the wing as two separate pieces. And then you can paste it to create the wing form.

[@assassings3030]

@@Kendin-Yap Please make a video on DELTA WING as well, I made it but it didn't flew, I damaged one of my Wooden Props as well, So plzz make a video!

[@saigonvangbong4952]

@@Kendin-Yap phane

[@beachabcd]

I bought exactly that type of plane 40 years ago. I built that using all the compartments in your video (these compartments were already cut). TY for reminding...!!!!

[@bobbymalta73]

Cheers mate Thanks for sharing May God Bless You!

[@particulatemini]

Kanal gayet eğitici ve eğlenceli.

[@GamingWorld-my6su]

You have a runway😃great👌👍

[@debashishdas4865]

Amazing 👌👌👌👌👌

[@martincarne1771]

Thanks for your incredible job!! You are a master!! Congratulations!! Excellent video too!!

[@keithfreeman5204]

Been flying model airplanes since 1959 from C/L to R/C. I build about the same sized airplane. I use Balsa and a .049 engine and 2 channels of radio. Fly all afternoon on less than a Quart of fuel.

[@tratymorg]

Pretty good, I enjoyed watching and thanks for sharing

[@jhonnatanbatista6973]

Thanks a lot. I've made one for my son and it flyes very nice. Congrats!!!

[@CorbuldelaSnagov]

Good job mate well done👏👏👏👏👍👍

[@will.ecrowe2090]

Nephew used this same procedure to build a spitfire for me. Excellent work ✌

[@youngcuzzoproductions]

DUDE THANK U SO MUCH UR AWSOME

[@glsksv5490]

Hayranlıkla izledim 👏👏👏

[@Susceptive35]

Emeğinize sağlık çok keyifle izledim.

[@Banjar-Belajar5587]

Z

[@MCsCreations]

Beautiful work, my friend! Really nicely done! 😃 Sorry for the absence, I haven't had enough time lately. 😕 Stay safe there with your family! 🖖😊

[@MrCaiokem1000]

Very good you are good pilot i liked it congratulations!

[@knownanhhis_gaming5871]

Im acutaly a kid and i wana be a engineer when i grow up so im starting at grade six and this might help me learn alot about engineering sice i watch alot of engineering and all the basics ty

[@골댕이-p9y]

im actually a kid too and from korea

[@deldridg]

This is awesome and *thank you* from Sydney. My son and I are about to build a 150% model of this and have all the components ready. We'll be attempting to build it from corflute (or coroplast as it's called elsewhere). Slightly heavier material but we'll give it a crack anyway. Cheers and thanks - Dave and young Will

[@fatihbural7845]

Have you started it yet? If yes what's the current situation? Greetings from Turkey.

[@deldridg]

@@fatihbural7845 Hi Fatih - thank you for your interest! Yes, we did make it but our maiden flight was not so successful due to high winds. Since then we haven't yet flown it properly but will try to do so when we get a chance. My experience tells me that it should fly pretty well (on a calm day). Here is a video my son and I made of the build: kzbin.info/www/bejne/lZnNfGhqbsqopdU Cheers from Sydney, Dave :-)

[@maxabeywickrema8975]

What about the receiver? What did you use?

[@fatihbural7845]

@@deldridg well congrats for making and having this experience! I have checked the link and also subscribed to the channel. Great work!

[@sedatergezer4837]

Congrats. I think your design was %150 bigger than @kendinyap. I just wonder that what did you use motor, propeller, esc and battery combination. Also, can you say that bigger is better for this plane for training stage. Thanks and hello from Turkey. Last one, could you please share detailed dimensions of your design and plans if it is possible. Thanks in advance.

[@ichigodyeagergutskenpachicruz]

This is my first build thanks it flew very good 😊

[@fiapo3104]

Muito da hora o aviãozinho, parabéns 👏👏👏👏

[@kostiakostiuk1677]

Hello! I am from Ukraine, you are TOP!

[@АндрейАндрей-х1ф5ы]

Чем проще тем генеральный! Отличное пособие для начинающих авиаторов! Однозначно лайк

[@muhammadhuzaifashahbaz1320]

Your videos are wonderful, I totally loved it. I was wondering if you make a giant plane with 4 brushless motors, wider wingspan and larger in scale. I was willing if you perform 25Kilometres round. I am willing to make such a project as well. But the battery in low size isn't allowing me to do.

[@unity3d706]

Yes bro its amazing keep it work 25 km wao I want to see your plan videos plz

[@ermiyassamuel6134]

Hey

[@davecollado1333]

wow , i wish i could do one of this. this is awesome

[@junaidalam190]

One of the great video with full information 👏👏

[@jrome6821]

This is ABSOLUTELY amazing

[@mjc7771]

So excited to try this myself :) thanks for sharing your wisdom and craft

[@the-electronic-guy]

I build it and it is insane thanks dude 😎

[@raggedrascal5463]

This is amazing. You are a genius. I've been considering building an RC plane for some time and this has given me the inspiration to make a start.

[@billwerner6362]

Very nice! But a very important item was left out... the dimensions for the dihedral brace that joins the two wing halves together.... How much dihedral is in the wing, and what would the dimensions of the brace be?

[@Kendin-Yap]

1:28

[@steve-j5k]

i give this video a 10 out of 10 very good

[@dovranes]

hocam! brao diyorum. Çin'den selamlar gönderiyorum

[@gundogduhatipoglu2151]

Çin'den bizim için kargoya malzeme koy da yolla gelsin toprağım :) orda ucuz

[@demoguz]

kardeş ayıp olmasın ama bok mu var yarasa yiyonuz

[@baklavaki3602]

kardeş orda yarasa yiyen varsa annesine benden taraf selam söyle

[@muhammadharunyole1539]

Unlimited motivation..✊ Thanks man 🙏

[@franciscorivera8389]

Muy buen trabajo..amigo Gracias

[@shloktahlani7028]

The best thing about his vid was that he gave the templates

[@transporder]

are you right 👍

[@shloktahlani7028]

@@transporder yes check the link

[@mustafaark9979]

hocam iniş takımlarına yaylı sistem yapsanız daha rahat iniş yapabilirsiniz !!!saygılar..!!

[@akademiktercume2178]

yaylı gibi yapmış zaten

[@serhat2820]

Tel esneyebiliyor

[@mahmoudzitouni7924]

Magnifique technologie❤

[@easy_3d]

Loved the video..thank you so much for making this video..it was really helpful

[@kadiryasinsit8492]

Hocam ben kendimce başarılı buluyorum seni ve severek takip ediyorum. Yaptığın şeyi değerlendirecek ustalığa sahip değilim ama çalışma vizyonunu beğeniyorum.