Rikon 10-326 Assembly

[@NRMGUY]

Both this Assembly and the Setup videos were essential to putting my Rikon 10-326 bandsaw together and accurately calibrating it to an optimal state, ready for use. The content covered everything I needed to know to get my saw set up efficiently, presenting the just right amount of information within each segment. The instructions are well-organized and well-paced, focusing on one topic at a time . Not only are the How-To steps clearly demonstrated, well lit, and cut to good close-ups as needed, but the reasoning behind each step in the process is also explained. This enhanced my understanding of the purpose behind each individual component and the overall mechanics of safe bandsaw operation. For this particular model, Acutabove Woodworking's tutorials are about as well organized, comprehensive, and concise as they come, and due to the product's popularity, there's no shortage of videos to choose from. In my opinion, for anyone who has recently bought or thinking of buying the Rikon 14" 10-326 bandsaw, these should be at the top of your watch list.

[@acutabove_woodworkings]

Well this was truly a joy to read. I honestly appreciate all your kind words and I am glad that the videos were helpful to you. That was their intended purpose and I'm glad that I achieved what I set out to do. Good luck with your new saw and thanks so much for tuning in.

[@mattfolker2135]

I just completed assembly and setup using your videos of this machine. Absolutely a huge benefit for a visual aid. Awesome videos and very well do. Simply can’t thank you enough for doing these videos.

[@acutabove_woodworkings]

I'm glad that they were useful for you Matt. Thanks for tuning in and for the kind words on the show. Good luck with the new saw.

[@Lugnut721]

I purchased a Rikon 10-326 a week ago and picked it up at my local Woodcraft store today. I had watched your assembly video a few days ago. My wife and I watched and paused, watched and paused it today out in the shop and used it to assemble the new band saw. Thank you for an informative and to-the-point assembly video, very helpful!

[@acutabove_woodworkings]

I'm glad to hear that you found the show to be useful Douglas. Congrats on the new bandsaw. I was using mine just today to re-saw some 8/4 walnut and cut a bunch of circles with a circle cutting jig. I hope you enjoy your new saw. Thanks for tuning in to the show and taking the time to leave the kind words. It's very much appreciated.

[@GuyPietrobono]

Great and very knowledgeable teacher. Quite well presented. Easy for a bandsaw beginner to understand. Looking forward to his video on making adjustments to my Rikon. Thank you.

[@acutabove_woodworkings]

Glad that you liked the video. Thank you for tuning in and for the kind words on the show.

[@stevemanzo7385]

Just purchased this saw today. Thanks for taking the initiative to make this assembly video. VERY HELPFUL!

[@acutabove_woodworkings]

I'm glad that you found it useful Steve. Thanks for tuning in and for taking the time to leave your comment. Good luck with your saw.

[@lakesidewoodworks1079]

Great assessment of the assembly, helped me tremendously. Very informative and no BS, thank you so much Kenny.

[@acutabove_woodworkings]

You're very welcome Rick. I'm glad that you found the show to be informative. Thanks for tuning in.

[@scottmorris4914]

I went through the same deal as you did. I went looking for a bandsaw, and decided on the Rikon 10-326. The price was right, and the 5 year warranty was a plus. I too work by myslef, and muscled it into the shop, and assembled on the floor and then lifted it to the vertical position.

[@acutabove_woodworkings]

Although it doesn't look like it, that saw is a bear to lift. I'm glad that you were able to get it set up Scott. Thanks for tuning in.

[@markk4015]

Hey Ken. I bought this saw based on a large part of your review. Your assembly video was hugely helpful! As you know, their written instructions left a lot to be desired. I haven't really put it through it's paces yet, but so far it looks like a great addition to the workshop. Thanks again for the help!

[@acutabove_woodworkings]

You're very welcome Mark. I'm glad that you found the videos to be useful and I hope that you have as much success with your band saw as I have had with mine. Thanks for tuning in and chiming in with your comment.

[@tneison23]

Thank you so much for posting this! I bought the 10-326 yesterday, used your video WAY more than the printed instructions it came with. Nice job.

[@acutabove_woodworkings]

Glad that you found the show to be useful Todd. That's great news. Thanks for tuning in.

[@wallyswoodcrafts9892]

This video and the one on setup helped me tremendously. It's people like Kenny that make KZbin such a great resource for useful information. Thank you!

[@acutabove_woodworkings]

I'm glad that I could help out Wally. Thanks for tuning in to the show and taking the time to leave the kind words. It's very much appreciated.

[@BooyaJoe]

I just purchased this saw and I just want to say this video is amazing. Thank you so much for making the tuning easier!!

[@acutabove_woodworkings]

You're very welcome Joe. I'm glad that you liked the show and that you found it useful. Good luck with your new saw. Thanks for tuning in to the show.

[@johnclark5971]

Excellent video. I just got mine today. I am more of a visual learner and you nailed it! No need for further comment, the previous comments speak for me!

[@acutabove_woodworkings]

Glad that you found the video to be useful John. Good luck with your assembly and your new saw. Thanks for tuning in to the show and taking the time to leave a comment. I truly appreciate it.

[@dirkbaumann9398]

I appreciate the two videos about the Rikon 10-326. The videos are well done and very helpful for me in assembling the band saw. Thank You for publishing this much needed video.

[@acutabove_woodworkings]

You are very welcome Dirk. This really is a nice saw and I am pretty sure that you will be happy with it. Thanks for tuning in.

[@robertmcevoy24]

Hi Ken received my Rikon yesterday, I viewed your vid awhile back , I found it very informative and helpful I only have a few more adjustments. I bought the Rikon for it’s resaw capabilities my Jet would only cut 6”. So I leaving my Jet set up for cutting curves . I started making wooden toys and I was burning up wood running it through my planer. I see you make toys as well . Thanks again

[@acutabove_woodworkings]

Glad that you were able to get your Rikon Robert. I hope you have as much luck with it and enjoy it as much as I have enjoyed mine. Good luck with your toy making. I'd love to see some of them some time. Thanks for tuning in to the show.

[@johnawhiting]

Happy I found your instructional video. Shopping for my first Band saw and this was Very Very Helpful. Thank You for a Grade A demonstration. God Bless You and Yours.

[@acutabove_woodworkings]

Glad to hear that you found the show useful John. Thanks for tuning in and taking the time to leave such a nice comment. It's very much appreciated.

[@richardriggs3576]

Just got this model today and your video helped me alot...Thanks for posting this... finished putting it together at 2 am... think ill wait til morning to test it out wife and kids might get mad lol...Thanks again

[@acutabove_woodworkings]

Waiting is probably the safest thing for you to do right now Richard. LOL. Thanks for tuning in and for the kind words on the show.

[@stuartschnare152]

Thanks so much, jut brought mine home and unboxed it and this video has answered all the questions I had. Hope to be re-sawing by the morning!

[@acutabove_woodworkings]

I'm glad to hear that you found the show to be useful Stuart. Good luck with your new saw and your re-sawing capability. Thanks for tuning in to the show.

[@comsigninc]

I’m ready to unload my saw from the van. Thank you so much for the assembly tips.

[@acutabove_woodworkings]

You're very welcome Duncan. Good luck with your saw assembly and thanks for tuning in.

[@matthewthemanparker]

Excellent video. I used it to help put together my new bandsaw yesterday. One tip I learned is that you can use two 123 blocks to help set the fence rail parallel to the table. I just put one in between the rail and the table next to each mounting stud and tightened it up until they were both snug. I kept them in as I leveled the rail with the table.

[@acutabove_woodworkings]

Nicely done Matthew. Thanks for chiming in with your tip. I love it. I appreciate you tuning in to the show and taking the time to leave a comment. Thanks very much.

[@richardanderson9593]

Fantastic job with the instructions. Rikon should just provide a link to this video instead of the anemic instructions they provide. I just purchased the saw and your video helped me enormously.

[@acutabove_woodworkings]

Glad to hear that the show was helpful to you Richard. I hope you enjoy your new saw. Thanks for tuning in and taking the time to leave the kind words.

[@turnedbysean2023]

This bandsaw is one of two models available to me locally - this video has certainly given me a lot to chew on! Thanks!

[@acutabove_woodworkings]

I'm glad that you found it somewhat useful Sean. It's always difficult to know whether or not you are making the right decision when it comes to a larger tool purchase. I hope that this video has helped you make some kind of decision. Thanks for tuning in. Feel free to ask any questions that you might have. I'd be more than happy to help if I can.

[@anisopteras]

Thank you so much for this video. Recently bought this band saw and your help was invaluable.

[@acutabove_woodworkings]

Only too glad to help Margaret. Thank you for tuning in and for taking the time to leave the kind words. It's very much appreciated.

[@jerrywoodworking4997]

I just purchased this bandsaw (Jan 15 2020) great video. I subscribe to several "how to" channels you have the best I have seen. Thanks

[@acutabove_woodworkings]

Thank you for the kind words on the show Jerry. I truly appreciate it and I appreciate you tuning in to the show.

[@joelsab8460]

Thank you for the video! Much easier than reading the manual, very helpful.

[@acutabove_woodworkings]

Glad that you enjoyed it Joel. Thanks for tuning in to the show.

[@stephanieprescott5247]

Michael Prescott Thanks, Excellent presentation. Followed you through the assembly and now ready for Set-up Again thanks for the video

[@acutabove_woodworkings]

Glad that you liked the show Michael. It's always nice to hear that folks find my content useful. Thank you for tuning in and taking the time to leave me a comment. I truly appreciate it. If you have any questions, please don't hesitate to ask.

[@corybourn8947]

Thanks for the detailed video. I just set my Rikon up today with your help.

[@acutabove_woodworkings]

Glad to hear that you found the video to be useful Cory. I hope you enjoy your saw. Thanks for tuning in to the show.

[@KevinBrockus]

Thanks for the assembly video, Ken. Didn't use the manual, only your video.

[@acutabove_woodworkings]

Glad that you found it useful Kevin. Good luck with your new saw. I hope you enjoy it. Thanks for tuning in to the show.

[@rohnsleather9986]

I'm putting my saw together today. This video is a great help. I have already watched the set up video and will be watching it again. Thanks for these two great videos.

[@acutabove_woodworkings]

It's comments like yours Rohn, that makes this show absolutely worth all the time and effort. Thanks for taking the time to leave the kind words and thanks for tuning in to the show. I hope that you will continue to enjoy other episodes as they are posted.

[@rohnsleather9986]

@@acutabove_woodworkings I subbed so I should be able to keep watching your shows.

[@acutabove_woodworkings]

@@rohnsleather9986 Glad to have you aboard.

[@paulsmessyworkshop]

Ken, thanks for the great video. I have looked at and considered that same saw, of course it takes me forever to make up my mind so I still don’t have one. It seems like it runs very smooth. You will never here me complain about an assembly or tool demonstration video. Nice having that information available when considering a purchase. I am anxious to hear how you like it after you put a few miles on it.

[@acutabove_woodworkings]

I'm sure that there will be a review at some point in time Paul. I really don't like to give too many first impressions because they are just that, first impressions without any practical experience on the tool itself. I will say that I have really like its performance so far and it re-saws like a dream. Thanks for tuning in.

[@lesgrove7295]

Great instructional information with a little humour thrown in. Thanks.

[@acutabove_woodworkings]

Glad that you liked it Les. Thanks for tuning in to the show.

[@jimeejhedrick9307]

Excellent presentation. Very helpful.

[@acutabove_woodworkings]

Glad that you found it helpful. Thanks for tuning in and for the kind words on the show.

[@TobiasMcGriff]

Bless you, sir. Saved me a days worth of reading bad instructions.

[@acutabove_woodworkings]

Glad to hear that you found it useful. Thanks for tuning in and taking the time to leave the kind words.

[@tomsommer54]

Thank you for posting this. I keep forgetting you have to put these saws together. I have a sawmill business and I’m looking for a good bandsaw so I can start making things. I mill all hardwood, black walnut red elm logs and oak.

[@acutabove_woodworkings]

I have used this saw to re-saw all of those species Tom and while this is a 14" bandsaw, I have only re-sawn widths of 10" boards or less. That being said, the saw had no problems handling that job and as long as you have a good re-saw blade, you'll have no problems. I hope this helps. Thanks for tuning in to the show.

[@dalewilliamson1125]

Nice assembly instructions Ken!! Thanks for sharing.

[@acutabove_woodworkings]

You're very welcome Dale. I'm really glad that you enjoyed the show.

[@terrencepowell270]

Thanks,. Kenny, for the video. I just bought a 10-326 and this has been very helpful.

[@acutabove_woodworkings]

Thanks for the kind words Terrence. I'm glad that you found the show to be helpful. Thanks for tuning in.

[@jaymyers7900]

Actually going to get this model today at Woodcraft!! Thanks for the informative video. Like you, I will be doing this myself (work alone). So rather than moving it myself from my Ranger into the shop, I figured I will open it up in the back of the Ranger and carry it in in pieces. Also, love the mobility kit, have a cramped shop (ok garage) myself and will need something. But seems like $150 for this base is quite a large sum for what it really is!!

[@acutabove_woodworkings]

Mobile bases are one of those things were there are plenty of options. The problem is that in order to get a mobile base that is rated for the weight of the tool, in most cases you are spending the $150 anyway so in my opinion, it's just better to get one that is designed for and rated for the saw. Just my opinion of course. Good luck with your saw Jay. I hope that your setup is easy going and that you are able to get your saw into the garage with no issues. Thanks for tuning in to the show.

[@jaymyers7900]

@@acutabove_woodworkings thanks for your response!! So far everything is great! Super silky smooth cutting and not bad assembly-even doing it myself. And yeah, I got the Rikon mobility kit while there. 😀 thanks again!

[@acutabove_woodworkings]

@@jaymyers7900 You're very welcome.

[@barryroberts6470]

That is one Excellent Assembly Video of a nice looking machine Kenny. Love the added extras that you get with it, and also the mobile part that you bought extra. I only have a bench top Bandsaw but at least there is something i have that you have on yours?, the holder for the push stick ha ha ha. Nice to see the small Cameo role of your shop helper, hope she brought out the coffee for you as well? Take it easy and enjoy your new toy. Barry (ENG)

[@acutabove_woodworkings]

LOL. Thanks for the kind words on the show Barry. Gotta love that shop helper. She just digs right in a helps out in every capacity she can....and yes, that includes coffee if I ask. LOL. thanks for tuning in .

[@rickallen5667]

Thank you for the video. It made assembly a breeze:)

[@acutabove_woodworkings]

Glad to hear the show was useful to you Rick. Good luck with your new saw and thanks for tuning in.

[@TetraCNC]

Great video Ken, this is one of three models that I am considering. I would really love to see a video on your impressions after you have put it through its paces. Nest up is the setup.

[@nopresetsnarklimit1675]

Great video, I’ve got the box delivered today and I’m just rewatching before I dig into it. Thanks for the video. Luckily for me the delivery guys put it right inside my door for me. Edit to add; totally impressed during unboxing, everything feels very substantial, heavy duty, and high quality. Except....the M5 flush mount bolts that attach the band saw to the stand, as one of the methods for attaching the base recommended by the manual and just like you did it is to attach the stand and then tip up the saw, I could see those small bolts stretching or snapping, Rikon should have used the same size bolts as used for the stand assembly. Looking at your video again you can see when you are standing it up a separation of the base and the bandsaw, possible bolt stretching there at 9:25

[@mt-0935]

Thanks for sharing such a helpful video.

[@acutabove_woodworkings]

Glad to hear that you found it helpful Jose. Thanks for tuning in to the show.

[@bradmcnamar5679]

This is a great demo! I am about as mechanically inclined as a bowl of soup and you made the assembly seem pretty easy. I look forward to seeing some of your other videos...including the set-up of this machine!

[@acutabove_woodworkings]

Thanks for the kind words on the show Brad. I really appreciate it. I hope you enjoy some of the other shows on my channel and I look forward to hearing your comments on some of the other episodes. Thanks for tuning in.

[@drabusharr]

Thanks for this excellent video! Helped me decide to get one.

[@acutabove_woodworkings]

I'm glad that you found the video to be useful. Thanks for tuning in and good luck with your new saw.

[@JMarcusPedroza]

Great video for assembly thank you! Unfortunately I was sent two left sides on the base and NO right sided base. Working with the seller to rectify. Really looking forward to finishing it. Thanks again for the video

[@acutabove_woodworkings]

Wow. Someone at the factory was asleep at the wheel when they packed that order. I hope that you are able to get this rectified quickly and that you can start enjoying your new saw as soon as possible. Thanks for tuning in to the show and for taking the time to leave the kind words.

[@SR-jz6jh]

Thanks for the video I just picked up mine today and will be setting it up tomorrow. I also got the base with mine & cant wait to try it out.

[@acutabove_woodworkings]

I think you will be happy with this saw. If you haven't already, you may want to check out the set up video on my channel for this saw. It may help to speed up your initial setup and calibration of the machine. Congratulations on the new purchase. I hope you enjoy it. Thanks for tuning in to the show.

[@abitibiwood]

Very clear. Great job ! Thanks

[@acutabove_woodworkings]

You're very welcome. I'm glad that you were able to take something positive away from the show. Thanks for tuning in.

[@fffbti]

Great video thanks! Yes there are not a lot of videos on these new Rikons. I just ordered a 10-353 which should be here in a couple weeks. In a lot of respects it is just a big version of the 10-326. I would love to see more videos from you on this saw.

[@acutabove_woodworkings]

I also have a Rikon 10-326 initial setup video that shows the steps for squaring up the table and the blade etc. If you are interested you can find it here. kzbin.info/www/bejne/pKCkXnpneLh1mZo

[@Alinverse]

Great work for all of us!

[@acutabove_woodworkings]

Thank you for the kind words Robert. I'm glad that you enjoyed the show. Thanks for tuning in.

[@tomasarguinzoni9022]

Very nice machine enjoy your new tools 👍🏼

[@acutabove_woodworkings]

Thanks Tomas. Always great to hear your comments on the show. Thanks for watching.

[@UndeadWarTurnip]

Thanks for this. Helped a tonne setting mine up.

[@acutabove_woodworkings]

Glad to hear that the show was helpful to you Jeff. Thanks for tuning in and taking the time to leave your comment.

[@elijahbrookesfamily9326]

Brilliant. So helpful! Thanks for doing this:)

[@acutabove_woodworkings]

You're very welcome Elijah. I'm glad that you found it useful. Thanks for tuning in.

[@gpdoyon]

Wow, thank you very much for so ng this! I just got mine today and you helped me out a lot.

[@acutabove_woodworkings]

You're very welcome Gerry. I'm glad that you found it useful. Thanks for tuning in.

[@mikemanning9132]

Great video. I just purchased the same saw and was looking for a quality instruction video thanks

[@acutabove_woodworkings]

Thanks for the kind words Mike. If you are looking for a setup video on this saw, you can find that on the channel as well. You can find it here if you are interested. kzbin.info/www/bejne/pKCkXnpneLh1mZo. Thanks for tuning in to the show.

[@buddytrent1351]

Thank you Brother much appreciate it

[@acutabove_woodworkings]

I hope you found it useful Buddy. Thanks for tuning in to the show.

[@68shiloh]

Great video, thanks for sharing.

[@acutabove_woodworkings]

You're very welcome Casey. Thanks for tuning in.

[@chickenguru4]

That’s great. Getting mine next week. It’s a big buy but I’m sure it will I’ll be super happy with it.

[@acutabove_woodworkings]

You may also want to check out the video on my channel demonstrating the setup of this saw. Congratulations on your new purchase. I hope you enjoy it. Thanks for tuning in to the show.

[@chickenguru4]

kennyearrings1 will be for sure. Picked up some cyber Monday discounted gift cards from lee valley. So it’s on sale lol

[@acutabove_woodworkings]

@@chickenguru4 LOL. I did the same. If you can wait to purchase something, getting it via a discounted gift card is the way to go. Great minds think alike.

[@lmallard3788]

I am a one man team. my wife is pretty strong. Thanks for this video

[@acutabove_woodworkings]

I guess when I say that I'm a one man team.....I mean that my wife is the backbone of that team. LOL. Thanks for tuning in Drake. I hope you enjoyed the show.

[@euler273]

Thanks for the video. I found it helpful.

[@acutabove_woodworkings]

Glad to hear that you found it helpful. I appreciate you tuning in to the show. Thank you.

[@mrljvb]

Mine was delivered 15 min ago... the freight guy helped me get it into my "shop"... aka my Garage.. Assembly is going to be fun...

[@acutabove_woodworkings]

Enjoy your new saw and good luck on your assembly. Thanks for tuning in. I hope you found the show to be useful.

[@tomgrillo1550]

Thanks for all the info. Just ordered one.

[@acutabove_woodworkings]

Glad that you enjoyed the show and found it useful Tom. I hope you like your bandsaw. Thanks for tuning in.

[@leejohnson2294]

just got mine friday, thank you for the video.. to bad mine had zero tools with it.

[@acutabove_woodworkings]

That's strange. Are they listed in the parts list of the manual? If so, I would be contacting Rikon and asking why they weren't included. Thanks for tuning in and for chiming in with your thoughts.

[@jlevy2000]

Great helpful video. I am picking up mine in a few hours. I noticed you did the mobile base after assembly. I would think before putting the heavy saw part just build the base and then add mobility there saw. Curious if there is a reason not to go this route. Thanks.

[@acutabove_woodworkings]

I just didn't want wheels on the base while trying to install the heavy saw on top of it. If putting the wheels on first works for you Jeff, then by all means, there's no reason that I can see why you couldn't do it that way. Thanks for tuning in and good luck with your new saw.

[@terryk3118]

Thanks for the detailed video. I'm using it to assemble my saw as it's much better than the printed instruction as well as their video. One of the things I didn't see in the Rikon instructions is that there is a "front" and "back" to the base plate. With only a 50-50 chance of getting it correct, naturally I put mine together backwards on the first try! One question for you: Do you recommend wiping away the generous amount of grease from the trunnion assembly to stop sawdust from accumulating - or is it best to leave it on to aid in adjusting table angle?

[@acutabove_woodworkings]

Hey there Terry, thanks for contacting me. I would suggest leaving the grease on. For the length of time that I have had my saw, I have never had any problems with sawdust buildup on the trunnions or on the rack and pinion adjustment of the saw. The grease is needed to reduce the metal on metal friction that can cause so many problems. I'm glad that you found the show to be helpful and I thank you for tuning in and taking the time to leave a comment. It is very much appreciated. If you have any other questions, please don't hesitate to ask.

[@gerrygolder7537]

Wish I had found your video after I struggled with putting it together especially the stand.

[@acutabove_woodworkings]

Well at least you're here now Gerry. I hope that you will find other episodes of the show that are of interest to you. Thanks for tuning in.

[@jimmymikecallahan8488]

Nice video. After removing the thick oil, I would suggest taking a file to the edges as they're quite sharp, top and bottom. Just knock off the sharpness.

[@acutabove_woodworkings]

A great suggestion Jimmy. Those factory edges on the cast iron can be brutal. Thanks for tuning in and for chiming in with your suggestion.

[@patricklynch9601]

I have watched your 3 videos on this saw and really appreciate your effort and style of no nonsense production. I am picking up my new saw in a few days and the assembly and setup videos will really help. I have a question regarding the table cleaning. What did you use to clean the table and how did you coat the table once cleaned. Thanks again for the great, instructive videos. Pat

[@acutabove_woodworkings]

The initial cleaning of the shipping grease is just cleaned off with some mineral spirits Pat. It does a great job of dissolving all the grease and really getting the parts cleaned. The problem is that it then leaves the cast iron unprotected. I have found that a great protection for the cast iron surfaces has been Autosol metal polish. It is normally used in maintaining hand planes and their cast iron surfaces but it has been exceptional in keeping my table saw, band saw, oscillating drum sander, disc sander and jointer in immaculate condition. It's easy to use, low odour and works great. The best part is, that it leaves a protective coating after you are done to protect the surface. A little goes a long way and it reasonably priced. Here's a link for it. www.leevalley.com/en-ca/shop/tools/supplies/polishing/67014-autosol-metal-polish?item=54Z1510 I hope this helps. Good luck with your new saw and thanks for tuning in. If you have any questions along the way, please don't hesitate to ask.

[@patricklynch9601]

@@acutabove_woodworkings Thanks very much for the recommendation.

[@acutabove_woodworkings]

@@patricklynch9601 You're very welcome.

[@j3ffwalker]

question: I just started to watch your video and noticed the tow bar on the mobility kit. From Rikons site the 10-326 isn't listed in their "list of saws"..although the non tow bar mobility kit is. Do you know if they changed something or did you just figure out that it would work? Ready to buy the mobility kit but like the one with the tow bar versus the foot press to lifting wheels one they mentioned for the saw. Thanks

[@acutabove_woodworkings]

I am not affiliated with Rikon but I too checked their website and found nothing pertaining to the mobile base with the tow bar. I also checked on Lee Valley's website (where I got the base) and they also do not carry it. I would have to go under the assumption that they have revamped and updated their inventory and that they have decided not to carry on with the tow bar style of mobile base. That being said, I have other tools that have the foot press style lift base and they are just fantastic. You don't have to store the tow bar that way. Thanks for tuning in Jeff and for bringing the change in mobile bases to my attention. I truly appreciate it. Good luck with your mobile base purchase. Either version is fantastic.

[@mikeltodd7063]

Great video! What do you use as a protectant after you clean off the oil and grease from the table?

[@acutabove_woodworkings]

For years I used paste wax and I have also tried using Glide Cote protective sprays but I found that they didn't last. A couple of years ago, I started using a metal polishing compound called Auto-Sol. It does a great job of bringing the cast iron to a beautiful shine and leaves behind a protective coating that seems to last forever. Give it a try. Here's a link. www.leevalley.com/en-ca/shop/tools/supplies/polishing/67014-autosol-metal-polish?item=54Z1510 I hope this helps Mikel. Thanks for tuning in to the show.

[@tannercook8136]

Great Video- This video is so helpful in putting this beast together! Who made these instructions that came with the Bandsaw harbor freight????

[@acutabove_woodworkings]

Glad that you found the assembly video to be useful Tanner. Thanks for tuning in.

[@louannkoebel3000]

Just got the bandsaw this weekend, and I appreciate the great video. One question, the M 8 bolts for the are base are very hard to screw in after the first few turns. I hate to force them on, is that just how they fit?

[@acutabove_woodworkings]

It is very possible that there is paint on the threads of the inserts. Chances are, you are just fine to continue screwing these in. Just check to make sure that you are not cross threaded and if the threads are going in just fine, carry on with the assembly.

[@iwokeupthismorning2]

Thanks, suscribed

[@acutabove_woodworkings]

Glad to have you aboard as a subscriber. Thanks for tuning in to the show. I look forward to your future comments on the channel.

[@mikedebany2904]

What are the approximate dimensions of the box? Want to make sure it will fit in my SUV.

[@acutabove_woodworkings]

According to Rikon's website Mike, the shipping container measures 54-1/2”x17-7/8”x23-7/8” I hope this helps. Thanks for tuning in to the show.

[@mikedebany2904]

Where does the Leveling Pin go. Does it go into a hole for storage? Also the front of the table is a tad lower than the back. Is there an adjustment?

[@acutabove_woodworkings]

The levelling pin goes in the hole in the front of the table Mike. In the table, there is a slot that runs from the front of the table to the blade and in the middle of that slot is a hole. The pin gets placed in that hole and keeps the table surfaces on either side of the slot aligned. As for the table being square from the front to the back, you may need to adjust your trunnions. On page 14 of your manual (if you don't have one you can find it here. www.rikontools.com/manuals/10-326.pdf ) it shows how to adjust the blade squareness from front to back. There are two Allen key adjustments in the trunnion mount that need to be tightened or loosened depending on which way your table is tilting. I hope this helps. Thanks for tuning in to the show Mike.

[@mikedebany2904]

@@acutabove_woodworkings Thanks for the advice and special thanks for this video. I used the video in the garage while assembling my new saw.

[@timshannon5474]

Hi Kenny, great video as always, was just wondering what protective spray you use on your cast iron tables

[@acutabove_woodworkings]

Thanks for the kind words on the show. I actually use two products on my cast iron. The spray, I use for a quick coating of protection and that is called Glidecote. It is a sealant and a lubricant for the tools so the stock slides easily on the cast surface. I find that it works really well on the jointer where there is a lot of stock being slid across the iron. You can find it here. www.leevalley.com/en/wood/page.aspx?p=40952&cat=1,230,64343,64350. For a longer last protection and a wicked shine, I use Autosol metal polish. It polishes the cast iron to a fine shine and applies a protective seal coating that lasts for months. A little of this stuff goes a long way so the tube lasts a very long time. It's a little more work to apply, but nothing serious. Here's the link. www.leevalley.com/en/wood/page.aspx?p=67014&cat=1,43415,43439,67014. I hope this helps. Thanks for tuning in to the show.

[@timshannon5474]

@@acutabove_woodworkings thanks a lot for the info Kenny, I know Lee Valley Tools well, Lee Valley and Busy Bee in Barrie are my 2 favourite toy stores!

[@mleblanc1234]

Good job, Ken. Now that you've had it for two years, what do you think of the tool? I'm looking at getting this saw to prepare bowl blanks. Thoughts?

[@acutabove_woodworkings]

I haven't had a single issue with the machine Marc. I gave a full review of the saw after using it for some time and as well, I recently gave a report on it during one of my 6 month update shows. I've cut up to (no need for me to cut thicker with my setup) 8" thick boards without any issues. The guide bearings are still awesome. No problems with alignment or the thrust bearings. All belts are still functioning properly and I have yet to be able to stall the machine out. I think you will be quite happy with it and find a heck of a lot more capabilities other than just bowl blanks. I hope this helps Marc. Thanks for tuning in to the show.

[@johnnywest5445]

Picked up my 10-326 from the shipping terminal this morning. This video was really helpful Kenny, especially with the base. No assembly instructions with that other than "here's an exploded view, now put it together". Great job. I did some of the setup before making my first cut and OH MY GOD! This thing is sweet, especially compared to my old 10" Craftsman benchtop saw. Will follow your setup video tomorrow or this weekend and get it all tuned in. Edit: Oh, I meant to a ask about that spray on coating you use. I'm using Johnson's paste wax on my table saw and did on this table as well. Is your spray on stuff better/easier, and what is it? Edit 2: Just saw the end post where you provided a link to the Glidecote. Will see about picking some up. It's time redo my tablesaw anyway and get ready for Christmas builds. Might as well give this a try.

[@acutabove_woodworkings]

The Glidecote is a great solution for a quick coating to protect the table. It is easy to apply and goes on quickly. It also has great lubrication qualities and allows the stock to glide over the cast iron effortlessly. For a little extra elbow grease though, I have found that a much better (and longer lasting) solution is Autosol metal polish. It polishes the cast iron to an awesome shine and leaves behind a protective coating that also lubricates. It has become my goto polish for the cast iron and a little goes a long way. Here's the link. www.leevalley.com/en/wood/page.aspx?p=67014&cat=1,43415,43439,67014 If you have any questions along the way with your bandsaw, feel free to ask. I'd be more than happy to help if I can.

[@AP-qw5ek]

I'm from jamaica need to purchase one of the saw

[@acutabove_woodworkings]

I'm not sure if they ship to Jamaica Andrew but you can always check on Rikon's website. rikontools.com I hope this helps. Thanks for tuning in to the show.

[@buddytrent1351]

Just got done installing the base to The Saw You save me a lot of pain staking time just watching this LOL watching the second part of the install right now thanks again brother I have another question for you not sure if you do a bunch of Re -Sawing Or not just wondering if you do what blade would you recommend I’m thinking about a carbide my first bandsaw I’ll probably have more questions LOL thank you

[@acutabove_woodworkings]

Every project that I make Buddy starts off as rough cut 8/4 stock. So every project involved re-saw. I've had several blades (albeit they were on my old bandsaw) and I was never happy with them. I purchased some of these www.leevalley.com/en-ca/shop/tools/power-tool-accessories/saw-blades/band-saw/111150-blades-for-rikon-14-inch-deluxe-bandsaw?item=03J5707 and have never looked back. The 5/8"X3TPI has been an incredible re-saw blade and I have had fantastic results with it for an extended period of time. I hope this helps you out. Good luck with you new saw and thanks for tuning in to the show.

[@buddytrent1351]

@@acutabove_woodworkings I have a question for you brother would you attempt to resaw Some 8/4 Walnut With the blade that came with the saw I just got a put together today just wondering if I should order another blade Thanks for all your help I have some six and 8 foot wide boards

[@acutabove_woodworkings]

@@buddytrent1351 You can definitely re-saw with the stock 5/8" blade. It has a few more teeth per inch and will not cut as quickly but you can certainly do it. I just found that I got much better results with the thinner kerf re-saw blade meant for the saw. But if you are in need to re-saw (or are just dying to try out your new toy) the 5/8" blade it comes with will certainly do the job for you. I hope this helps.

[@buddytrent1351]

@@acutabove_woodworkings Thank you so much that’s what I wanna do I wanna cut something LOL

[@waskito3443]

I can't even imagine putting this together without an electric ratchet

[@acutabove_woodworkings]

An electric ratchet would definitely speed things up and reduce the strain on our joints. I wish I had one. Thanks for tuning in to the show and for chiming in with your comment.

[@gfi64]

" The Proof Of The Pudding Is In The Tasting" Awesome machine ..

[@acutabove_woodworkings]

So far Grant, I'm quite happy with this machine. If you are interested in my review after using it for a while, you can find that video here. kzbin.info/www/bejne/iqmsZ5iIeLqYa7s. Thanks for tuning in to the show and for taking the time to leave a comment. It's very much appreciated.

[@glsmaverick]

I know this is an older video but I was curious how tall you are? I'm 5'8" tall and I am considering this saw but am kind of turned off by the height of the table to the floor being at 41" which to me seems pretty high. I know I could lower it by building a different base but it looks like a fairly comfortable height on you. So I was just wondering your height compared to mine. Thanks for the great videos on this model.

[@acutabove_woodworkings]

I am 6' 2" tall Miller. I have never had an issue with the height of this bandsaw and you are correct that it is quite comfortable for me. My suggestion would be to check your local woodworking stores to see if they have one in their showroom that you could check out for height. I honestly don't think you would have an issue with it. I hope this helps. Thanks for tuning in to the show and if you have any questions at all, please don't hesitate to ask.

[@jeffoldham3466]

im going to get this bandsaw this month,,so I will be watching this video again,,lol,,do you still like the bandsaw and has it given you any trouble

[@acutabove_woodworkings]

So far, I love this saw. I have done re-saw on hard maple, 9" thick and the saw didn't stall or have any issues whatsoever. There is a review of the saw scheduled for April 16th on the show if you are interested. I can honestly say that if I were going to be in the market for a new bandsaw and I knew what I know now about it, I would definitely buy this one again. Love the saw. I don't think you will be disappointed.

[@jeffoldham3466]

thank you

[@acutabove_woodworkings]

@@jeffoldham3466 you're very welcome.

[@enzo1406]

Set-up would have been much harder without this video, thank you!

[@acutabove_woodworkings]

You're very welcome Enzo. Glad that you found the show helpful. Thanks for tuning in.

[@kevinb6102]

How long was the box? Thx

[@acutabove_woodworkings]

54-1/2"X17-7/8"X23-7/8". I hope this helps. thanks for tuning in.

[@Jhursh]

What do you use to protect the table?

[@acutabove_woodworkings]

I used to use a Bostik spray for the cast iron but I've since gotten away from that as I find that it isn't very durable. Some folks use past wax and that is just fine as well. I personally, prefer to use a metal polish. My preferred brand at the moment is Auto-Sol metal polish. A little goes a long way and it polishes the table top to a beautiful shine and leaves behind a very durable, protective coating. I hope this helps. thanks for tuning in. Here is the link for the Autosol. www.leevalley.com/en/wood/page.aspx?p=67014&cat=1,43415,43439,67014

[@barryccollyer2429]

The current mobile base has a step on arrangement and no duel wheel handle as shown in this video. It works well except the step on single wheel attachment is a major tripping hazard.

[@acutabove_woodworkings]

Glad to know they've changed their design. Sounds like it still needs a little revamping though. Thanks for tuning in to the show Barry and for providing us with an update. It's appreciated.

[@mikenageleisen9878]

Very helpful and fun. The quality/readability of the provided manual was poor, this video makes up the manufactures gap! My tip... "the left panel section for the base has the door hinges"

[@acutabove_woodworkings]

I'm glad that you enjoyed the show and found it useful Mike. Thanks for the tip and for tuning in to the show. The fact that you took the time to leave the kind words is very much appreciated.

[@dirkbaumann9398]

I do not use facebook

[@acutabove_woodworkings]

email sent.

[@bouncehouseofficial]

It is straight DUMB that the door cannot open all the way with the mobility kit installed.

[@acutabove_woodworkings]

I can't argue with you on that one. Thanks for tuning in to the show.

[@wolflahti412]

Measuring the distance from the miter slot to a straight edge you _hope_ is parallel to the blade is too prone to error. You need to make test cuts and incrementally adjust the table on the trunnions. A good guide for this is kzbin.info/www/bejne/rH_Ho56jrZuYnqs. Yes, it's a bit finicky-but essential.

[@acutabove_woodworkings]

Much like most things in woodworking, there are multiple methods available to accomplish every task. Thanks for chiming in with your preferred method. Thanks for tuning in.

[@alanrichardson7244]

It’s not the saw I thought it would be. No matter what I do I get blade drift. I wouldn’t recommend it.

[@acutabove_woodworkings]

Sorry to hear this Alan. Blade drift is caused by many factors and sometimes, it is just the blade that is twisted. In most cases that I have discovered though, blade drift is caused by two major factors....1) using a blade that is improperly sized for the task or 2) improper setup of the thrust and guide bearings. While I'm not suggesting that you don't know how to set these up, I would suggest that you check videos on the proper alignment of the bearing and try a different blade and see if it helps you. You have to remember that blade drift is just that....BLADE drift. It isn't a feature of the saw, it's a feature of the blade and proper setup of the saw can combat that. I hope this helps. Thanks for tuning in to the show.

[@CogentConsult]

You said at the end, “ The setup of the Rikon”,,,But this is dead wrong. Nit was only the assembly.

[@acutabove_woodworkings]

My mistake Rich. Here's the link to the setup video on the channel. Thanks for tuning in. kzbin.info/www/bejne/pKCkXnpneLh1mZo

[@MrPatdeeee]

Too much rhetoric and not enough of "Do It!! Boring!

[@acutabove_woodworkings]

Sorry that you feel that way Pat. I hope you were able to take something positive away from the show. Thanks for tuning in

[@MrPatdeeee]

@@acutabove_woodworkings Thank you that you didn't curse me.

[@acutabove_woodworkings]

@@MrPatdeeee I produce two shows a week, as well as holding down a full time, 40+ hour a week job. I would be a fool to think that every show would please every viewer. You are fully entitled to your opinion and I respect that. I try to produce a show that benefits all levels of woodworking and sometimes, (who am I kidding? It's most of the time) I talk too much, but there are plenty of folks who enjoy the extra information. With well over 600 episodes of the show on my channel, I hope that you will come across one of my shows one day that you will enjoy.

[@chlenishev]

рикон плохая пила. постоянные вибрации и стол неправильно выставлен относительно полотна.

[@acutabove_woodworkings]

Thank you for tuning in to the show and for taking the time to leave your comment. It's appreciated.