Kenworth T680 Instrument Cluster Stepper Motors Replacement

[@charlesfroze6724]

Hi guys, I just bought and received air pression motor gauge, and instaled now following all instructions. Now everything works well. Thanks Dmytro.

[@DIYDime]

You are welcome

[@PaulGoddard-b2t]

Hey I have a t680 2019 with the same problem with the air gauge secondary and you said you sell them?

[@DIYDime]

a.co/d/0csqxjk3

[@BigBoom76]

Hey man, I replace the motor for the air gauges but secondary still down, do you have any sugestion?

[@DIYDime]

Do you have air in your secondary tank? Make sure it’s building up air. If you have air in your tanks make sure when you install motor those 4 pins are align with a holes, make sure they are not bent. Make sure when you install the motor it’s in good contact with PCB board. Do a test on this motor even if it’s new it can be bad. After installing secondary needle, move it by finger from start to finish point and it should move very easy, it should move same like your primary needle. If it’s not most likely bad motor. If you did everything above and it’s still doesn’t work, most likely your dash board bad.

[@BigBoom76]

Now the needle just stays right up on the 75 psi mark, I’ll do everything again, thanks for your help man

[@DIYDime]

@@BigBoom76 Like I said before make sure when you move your secondary needle by finger it’s moving freely. Good luck 👍

[@BigBoom76]

Thanks!!

[@karamshasha3734]

I have same issue can you fix to me l am live in USA

[@DIYDime]

Where are you located?

[@karamshasha3734]

Michigan

[@karamshasha3734]

Can you tell me how you are order the motor air gauge

[@DIYDime]

a.aliexpress.com/_mLASJQA

[@TheDjkrazyd]

I’m looking for this gauge on aliexpress but can’t find the part for kenworth.

[@karanveersandhu4769]

Where to buy motors

[@DIYDime]

eBay

[@Omar-777-40]

Where did you get motor gauge white motor and black motor ?

[@DIYDime]

Link in the description. Otherwise China

[@DIYDime]

Contact me via Facebook and I’ll help you.

[@charlesfroze6724]

Hello, how can I buy this motor air pressure gauge? I have a T680 2019.

[@DIYDime]

Contact me via Facebook and I’ll help you. I sell them on Facebook otherwise China

[@karamshasha3734]

Welcome. I have the same problem. Can you fix it for me? Where do you live I can bring you track it’s T680 2019

[@jacobvelasquez5579]

@@DIYDimedo you have contact number? Don’t have facebook