Kevin's PC Build

[@DexterManning]

Yeah... Think I'll have mine pre-built

[@CosmicBeni]

GG, Dex.

[@abdullahabdelwahab866]

gg

[@thecreaturehub]

Sorry Dex, it's mandatory!

[@kimkronvall5726]

Think you should do that too. Damn, no mercy on that cpu and damn that poor cable management haha

[@BOONDOCKVERITAS]

A wise man indeed.

[@idoesntfraid]

the way he put that thermal paste on hurt my soul

[@blotseson514]

At least he didn't use a paper towel to rub it around.

[@flamesofhellstudio]

Yea for that kind of paste you just press the heatsink on and it expands out by itself, you only need to use the applicator for the less viscous thermal pastes.

[@idoesntfraid]

Blotse they probably did in the jump cut!

[@idoesntfraid]

Gaeuvyen i still use dot method even with less viscous pastes the heat will make it spread to where it needs to go anyway using an applicator just causes bubbles

[@LoonyNaughty]

Caspir That part made me cringe.

[@uncle-bacon]

Cable management? Dual channeling RAM? Proper application of thermal paste? Have you heard of these Jordan?

[@damienscullytoo]

overkill power supply? Overkill Mobo? Useless cpu fan? Jordan plz

[@ThisIsFuj]

Haha my exact thoughts.

[@Tmaxx101399]

***** Spreading it around causes air pockets, cable management can block airflow.

[@ThisIsFuj]

***** Cable management isn't solely for making your build look nice, it maximizes airflow and can allow you to bring your speeds down lower (which in this case would be helpful). You are completely wrong about the MOBO, dual channel memory is always installed every other DIMM hence the color coding. Putting a pea-sized dab in the middle is the proper way to apply thermal paste and again, maximizes performance and cooling.

[@kootra]

pft, you dont need that garbage. Those are all myths

[@SkrubCern]

after years of pc building knowledge, I know one thing. Jordan put the RAM in single channel rather than Dual Channel

[@oldmanchickenlegs]

I just noticed this aswell

[@CrownGamingAU]

Remember console gamers, If Jordan can build a PC, you can too.

[@RubiixCat]

It also costs more

[@CrownGamingAU]

***** Fuck yeah, Nintendo is an exception ;)

[@JO3TATO]

RubiixCat what costs more?

[@CrownGamingAU]

RubiixCat nope. My PC cost 450 bucks and outperforms the PS4. Games are much much much cheaper, no subscription. I've literally saved thousands of dollars being a PC gamer. I could show you my build if you're interested, my misinformed friend.

[@Drkbowers1]

Totally Harmless Unfortunately because of the amount of optimization that goes into console games because of the uniform specifications (One of the only pluses related to their hardware) I would say they could either come to or outperform you on most titles on both platforms. However you have much more hard drive space to work with.

[@zeebra901]

thermal paste application 10/10

[@ameliastevens2453]

7.8/10

[@zeebra901]

Brady Amelia after reading your comment, you have persuaded me.

[@ameliastevens2453]

zeebra901 there needs to be more anal

[@zeebra901]

Brady Amelia no doubt

[@ameliastevens2453]

Cookie Monster no its 7.8

[@NinjaPups]

Found out yesterday on the stream Kevin was only 18.. had no idea he was so young!

[@nathan9485]

i dont think he is that young

[@NinjaPups]

Nathan Bird lol he dern sure is. Look him up. you can even find him on the creature wiki, he turned 18 in Feb.

[@NinjaPups]

Nathan Bird click this link, or literally type in google "how old is goldenblackhawk" lol www.google.com/search?q=how+old+is+goldenblackhawk&oq=how+old+is+goldenblack&aqs=chrome.1.69i57j0.8977j0j7&sourceid=chrome&es_sm=119&ie=UTF-8 or read his twitch :p

[@nathan9485]

really?

[@nathan9485]

NinjaPups wtf

[@maccas4268]

Jordan is the most qualified to build a pc in the office? that isn't saying much since he can barely build a pc. He has the mobo on a table, something that's very prone to damaging it. He has two sticks of ram (which is fine) yet he put them in both a black and red slot (ever heard of dual channel?). Simply how he handled the cpu hurt my insides and spreading the paste? Kill me now. The fact that he actually got the pc up and running baffles me.

[@chocolatefudgebrowni3225]

it's because he is Jordan, that's how he got it running lol

[@jamiebot]

I was thinking this exact thing. I was going to comment something like this then I saw your comment.

[@chocolatefudgebrowni3225]

who knows lol maybe, maybe not

[@x2xHalox2x]

Jordan did flank on those two parts. The motherboard on the table without cushing to prevent any damage and overly putting termal paste. Other than that he did great and that computer looks sick... spec must be crazy

[@YUNGSVGE]

i was thinking the same. and last week i built my first pc and i did none of the things kootra did in this video. i never cringed so hard in my life.

[@marko325]

4 years late but that thermal paste application makes me want to cry

[@TheFrodoBaggins33]

This is by far the most masterful way to build a PC I have ever seen. The way Jordan handles the motherboard could be compared to a surgeon. The dexterity of movement is immaculate. The smooth, precise application of the thermal paste was very well done. His knowledge of the inner workings of the PC is clearly extensive. Very simply, Jordan is a master of the PC. If anyone asks me how to build a PC, I would immediately and without hesitation refer them to this video, which is the diamond of all PC build tutorials.

[@Rophite]

ONYXgamerninja Joke, right over your head.

[@ReeCocho]

Did he put the ram in two different colored slots? WHAT IS WRONG WITH YOU!?! TAKE ADVANTAGE OF THAT DUAL CHANNEL!!!

[@VeeDees]

Also, pretty sure ram isn't in dual channel now...

[@thenerdycanadian7172]

um yeah, it's dual channel, only the 2011 socket has quad channel

[@VeeDees]

TheNerdyCanadian Sure, but usually you alternate slots, red and black, for dual channel.

[@thenerdycanadian7172]

VeeDees Productions it's Kootra, i don't think he knows that, he's too obsessed with cats

[@PersistantTaco]

TheNerdyCanadian And CS:GO Cases

[@TheDanDeeMan]

I was so angry! Read the God damn motherboard manual! XD

[@TheLILSAINT14]

When I'm watching him build a pc, I'm thinking, wow he is smart he knows to build a pc. When I'm looking at the comments and criticizing his performance saying that he is not doing it right, I'm like what is he doing wrong? Comes to show how much I know about computers. 😩

[@dinamotef6572]

same hahah

[@tommo959]

The cable management hurts my eyes. The thermal paste application breaks my heart. The ram installation damaged my soul.

[@crookslounge6957]

PC's are like More expensive Lego's.

[@peterpansie5]

The way he installed the ram will make it run like he only has half that much

[@AznAD100]

yea, I dont know shit either about building pc's lol

[@XamiusMax]

That thermal paste.... The RAM installation... The cable management... Jordan why

[@EvanSaltare]

2:40 Finesse my ass. He wiggled the fuck outta that CPU. Just have someone else build it next time.

[@GeorgeRsh]

That thermal paste placement hrnng Not placing RAM in dual channel hrnnng Jordan pls ur killing my soul

[@GeorgeRsh]

***** airflow is 4 scrubs.

[@GeorgeRsh]

George Rushton 850w of pure uselessness about 400w overneeded

[@Gabu_]

George Rushton My only guess is that they've gotten those for free. That or James' 7.7m stack wasn't fitting in the safe and they had to use it.

[@ccywdt]

arent you supposed to put the ram in the matching ram slots (color wise (every other))

[@MrMoldyMurder]

Yep,if you get a dual channel kit,I.E. every kit you can buy pretty much,you are supposed to put them into the same colored slots so that they can run in dual channel mode.Not anything catastrophic though.

[@TopMassEntertainment]

yeah was thinking the same thing. Gskill is dual channel.. jordan.. omg really?

[@SomethingCool51]

Demon1Robe Yeah, imagine how overpriced that 2400mhz ram was. If he cared enough to buy the bigger number frequency, he may as well install it properly. And holy shit, that thermal paste. He's lucky it didn't spread off the chip and onto components

[@MrMoldyMurder]

SomethingCool51 The thermal compound bit gave me cancer :D.Seriously though,just put a pea sized drop onto the CPU and then but the heatsink on.Doing it the way koots did can result in air bubbles which can mess up the cooling performance.

[@SomethingCool51]

Moldy Not to mention conductive material spreading off the heatspreader and onto your motherboard

[@curly0117]

You should do a full tutorial on how to build a PC one day. Step by step with plugging in cables, installing windows, everything.

[@theSuperdavid999]

Exept that he is crap at it

[@namrogful]

Look up Carey Holzman on youtube

[@TheHarleyEvans]

www.kitguru.net/site-news/announcements/faith/build-your-first-pc-step-by-step-video-guide-with-kitguru-tv/

[@puritech1609]

There are just so many of those on KZbin. Probably thousands. CareyHolzman has a very good indepth one and LinusTechTIps has a decent one too, although not as detailed.

[@particle0]

Puri Tech But if The Creatures did it themselves, it'd be much more entertaining to watch.

[@iTzHuGzz]

looks like you put on way too much thermal paste :P but if it works, it works :P

[@LaggersStation]

I think ive just found the first non complaint in this comment section ;~;

[@iTzHuGzz]

but koots really need to learn cable management xD

[@Eagle7z]

and the way he applied it can cause air bubbles which can be really bad, he should just put a pea sized drop in the middle and not push it around

[@iTzHuGzz]

♛ Eagle ♛ well it might cause airbubbles, but when you tighten the cpu cooler on it would remove most of them, and during heating and cooling the thermal paste will spread evenly

[@Eagle7z]

Cradman yeah, but he still used way to much and did alot of thing wrong -_-

[@UwU-lo4dv]

LMFAO That was the worst application of thermal paste I've ever seen in my life XD Good luck Kevin.

[@LoonyNaughty]

kootra Jordan, I am very disappointed in this PC build....you should have this down to a science for how many PC's you've built. First you put the cpu paste on all wrong and then you put the ram in all wrong! If your only going to use 2 ram slots, you're supposed to go every other slot (matching colors). JORDAN PLEASE!!!!! I hope you fixed it after or are going to fix it because otherwise this won't run nearly as good as it should.

[@jadeprinces]

it won't run good anyways because he is using very bad board.

[@LoonyNaughty]

Grim Reaper What board would you recommend? And what boards in general would you recommend to stay away from besides this one?

[@jadeprinces]

Micah Sarver depends how much can you spend.From top of my head here are few Hero,Ranger,Gene VII,Asus Z97-Pro, Gigabyte Z97X Gaming,x79delux,ARIVBE,asus V extreme... etc I would never buy Msi,Asrock,Ecs,Abit EDIT: Just to add do research check forums,community,google before you buy components

[@James-134]

The ram sticks are meant to match the color, you don't put one in the red slot and one in the black...

[@R4Z3RHD]

In the.... X men.... base.... we have .... supercomputers.... that make this computer look like ..... poop...

[@josephjameson7984]

Why do you try so hard, yet fail so easily?

[@deadpool2596]

Joseph Jameson half-life 3 confirmed

[@tiodinero6301]

DaHuudNigga a good sonic game confirmed

[@spynova1504]

They must...........be............Muuuutaannns

[@anon2752]

you mean the X-mansion right

[@naimba]

kev has nerves of steel when Jordan puts the thermal paste on... my heart exploded in my chest good lord.

[@skyrout128]

as computer building specialist, I should say that the RAM setup not really opens wide all of the opportunities - modules were putted into slots side by side of each other, that would not give Dual Channel configuration, which theoretically speeds up the frequency almost twice.. and more - no cable management at all, to not talk about efficiency =/__\=

[@PastaM0nsta]

LOLLLL "computer building specialist"...... dat self proclaimed title

[@skyrout128]

well, I don't care if you say so, but I'm paid for my job as a computer building specialist. and if my assumptions are wrong, you can add yours or point there where I'm wrong

[@PastaM0nsta]

its called low paid tech guy, theres no such thing as a computer building specialist

[@skyrout128]

tell me, when you'll be in Russia) though you're right - here anyone would be "low paid", when someone would look down from your heights)

[@WolffangMR]

Your not a computer specialist your some person that either took one class or looked some things up on the Internet.

[@GNRLHOTDOG12]

Jordan... Have you heard of cable management? And dual channel mode for ram?

[@digitalvii]

Christ, that cable management...

[@waty0usay1]

would've been more interesting if you would've posted the PC specs in the description.

[@soundslave]

Intel i7 4770k socket 1150. 16GB (8x2) 2400MHz G.Skill Trident X Ram. Corsair HX 850i PSU. Asus Maxiumus 6 extreme mobo. Samsung Evo (I assume 840 500GB) SSD. Zalman CPNS something CPU cooler. Generic hard drives (snore) The graphics card was the only bit they didn't show. You get a peek at the side of the box, it's green so assume it's Nvidia. So it's gotta be a 700 series or 900 series.

[@Simplystimulating]

( ͡° ͜ʖ ͡°)

[@MisterRadomil]

soundslave Although I'd argue about the 500gb sd drive. seems like over kill if its that much...

[@soundslave]

***** They have lots of games. I'd used a 500GB if I were them. I have a 250GB one and it's always full, and I don't do gaming for my living like the creatures do. Plus these guys can afford it baby! :D

[@TheDjNiceproof]

soundslave The GPU might be a MSI GTX970/980?

[@TheHarleyEvans]

i'm in love with jordan's cable management right there

[@aCardboardTube]

I die a little inside everytime i see Jordan built a PC..

[@ImmaTrunks2]

The computer from which Kevin will bring us glorious content.

[@PopeAleks]

Lord Kevin always brings us glorious content no matter what.

[@TCBurns]

PRAISE BE TO MY ONE TRUE LOVE AND LORD ALEKS!! May you bless GabeN so he can deliver great cases to your disciples!

[@OakFeeds]

My nigga

[@ImmaTrunks2]

Pope Nova Pope Nova?

[@PopeAleks]

Pope Nova Ayy lmao. Dawg, how are you?

[@BravoLeader117]

I wanted to tear my hair out when I saw Jordan apply that thermal paste u_u

[@BravoLeader117]

SebHighDef Oh god he didn't put them in the right slots lmao

[@wiseguy2432]

And the cable management. Not to mention the fan control

[@nat123800]

*my soul just died* It worst for me to see this because i make Custom pc

[@1998scout]

Jordan, you only need about a rice grain worth of thermal paste. Thank you... (This message from the "God Dammit Jordan! STOP" foundation)

[@Vortexzz1]

"Jordan, at what point, did you decide to Yolo my computer?" Dead 😂

[@hannah4lyf]

i love rewatching these videos and seeing all the mad nerdz

[@captainphobos8670]

He sure took a big risk putting that much thermal paste on the cpu

[@salikali2]

A pea sized drop in the middle is all that is needed.

[@captainphobos8670]

Salik Ali Exactly.

[@Gabu_]

Jordan isn't exactly well versed when it comes to thermal management of computers.

[@salikali2]

***** There are many strategies to apply thermal paste and there isn't a definitely better approach. Some people also like to get a plastic bag and use it to spread the thermal paste but in the end you want a small amount of thermal paste. He used way too much thermal paste is something we can all come to a consensus on.

[@captainphobos8670]

Salik Ali I usually do a pea drop or a thin diagonal line.

[@MrJackojc90]

Terrible thermal paste placement and ram placement wow lol

[@MrJackojc90]

Actually, just released he never tested components before putting them in either, How not to build a PC

[@salikali2]

Pretty sure there is supposed to be a slot between the rams but who knows xD. You also didn't mention the fantastic cable management.

[@MrJackojc90]

I know right, lol, such a fail.

[@ViscountBiltmore]

***** Well you can over fix it. Everyone makes mistakes and im pretty sure you can't any better so please be quiet.

[@salikali2]

Queen pawnz I am sure he can do better lol. I have never seen a person place ram like that and in order to fix the thermal paste he has to get alcohol and clean the cpu. To clean the cpu he has to take the heat sink off and then put it back on which is a pain in the ass.

[@memekid1185]

Oh god, now Jordan unboxing computer parts. What could go wrong?

[@thenerdycanadian7172]

everything can go wrong, and will go wrong

[@martinelli1177]

EVERYTHING

[@ethosaur]

If hes lucky he might find some labyrinths in there.

[@Misterbiggs1]

I actually like watching these computer build videos. I like to compare what I have to what Jordan uses when he builds.

[@frey2605]

I honestly have never seen a better thermal paste application

[@Raddishist]

Kevin and Jordan make a good team

[@GungoGoblin]

Any second now people will flood this and create a comment thread longer than this... Banana

[@Raddishist]

TheRealXgamer101 Probably not

[@Raddishist]

***** Calm down there or I'm gonna have to place you... UNDER ARREST! *trying not to giggle*

[@hunterparah1952]

***** Nice meme.

[@xALMIGHTYBOSSx]

PC MASTER RAAAAACCCCEEE

[@ameliastevens2453]

ps4 is best

[@ameliastevens2453]

PentakillZeeeeee where

[@josephjameson7984]

Multi Console master race, stupid single system peasant, oh and btw you're the cancer that is ruining pc gaming.

[@ameliastevens2453]

Joseph Jameson consoles for lyfe

[@JonasCraftUltimate]

Brady Amelia you're funny

[@DemonsSoulsSuperPro]

#pcmasterrace420blazeit

[@Wingspan_5]

PC is love. PC is life.

[@TCBurns]

M7 y0u want t0 f1gh7? #consolepeasantsdontblazeit

[@ameliastevens2453]

Awesome Llama pc4lyfe

[@TCBurns]

Fight m3 in th3 wildy...you'll be xXrektXx

[@beargguy3809]

Awesome Llama I'm sponsored by Mountain Dew and Doritos. 1v1 ME M8

[@Recon801]

1. Cable Management is a thing. Improves airflow and right side panel is there for literally that reason. 2. Ram is designed to run in matching slots hence why the slots are color coded. Will it work the way u did it, yes but can cause timing problems. 3. You invest in a great motherboard, case, etc and yet don't Overclock. Free performance why wouldn't you.

[@matthewroach5637]

And the cable management is amazing!!

[@ThatKarin]

Jordan has a really interesting wedding ring. I smile whenever I see it, young married people are freaking cute.

[@LuVrBOYmusic]

Comment section summed up: 1. Nerds raging how Jordan has built this PC even though it works fine 2. More nerds raging how Jordan has built this PC 3 Even more nerds complaining 4. Professor X references 5. PC master race

[@hitlersmagicalcarpet5731]

Comment section summed up 1. Comment section summed up: 2. Nerds raging how Jordan has built this PC even though it works fine 3. More nerds raging how Jordan has built this PC 4 Even more nerds complaining 5. Professor X references 6. PC master race

[@iMrHydraa]

You forgot about the Aleks accounts

[@the03k]

Raging? God, standards have really died these days haven't they?

[@andrewvoutsinas7460]

Hitler's Magical Carpet Nerds? Nerds... it takes a genius to know how to build a PC right?

[@hitlersmagicalcarpet5731]

Comment section summed up 1. Comment section summed up: 2. Nerds raging how Jordan has built this PC even though it works fine 3. More nerds raging how Jordan has built this PC 4 Even more nerds complaining 5. Professor X references 6. PC master race 7. Nerds on the computer

[@dabagonsmith]

not placing motherboard on anti-static bag, abysmal thermal place application(arctic silver 5 tho), and terrible cable management. 10/10 better than I could do.

[@TJG421]

I could throw those computer parts out a window and it would come out better than he did. lol

[@JulianYEAHBUDDY]

to my knowledge and plenty of people on r/buildapc, putting the mobo on the anti-static bag is a bad idea

[@TJG421]

Frankly it really doesnt matter as long as you just put it on anything that isnt fabric

[@MonoVirtuoso]

I'm a noob at PC building and I may make one soon so I have to ask,why shouldn't I put the Motherboard on fabric?

[@tommo959]

ThoseJerseyGamers The outside of the bags are designed to conduct static electricity. Putting electronics on it like a motherboard is a bad idea. The box would do fine

[@Roosterism]

Gotta love that thermal paste application, all dat cable management, and... *fucking explodes*

[@sidshoman]

I love it when you guys do pc builds

[@marios3202]

Disliked for the incorrect RAM installation..

[@kennyflores5846]

My heart sank when koots didn't put the ram on dual channel... I can't watch no more

[@leoncraftmc]

After reading the comments, how did my PC even work?, I used a whole tube of Artic Silver 5 thermal paste like newegg told me and I haven't encounter any lag or problems for the past 3 years. I thought you were supposed to use all the thermal paste.

[@iriesen]

You're supposed to put a dot in the middle, and the heatsink will spread it out for you. You're pretty lucky, because the Arctic Silver 5 is non-conductive, so it won't short things out. That's probably why your PC is still alive

[@rustyshackleford4622]

WHAT THE FUCK IS WRONG WITH YOU.

[@rustyshackleford4622]

_iris_ Arctic Silver is conductive, hence "silver". It contains silver and other metals which makes it a better conductor.

[@iriesen]

Rusty Shackleford I've looked around the internet, and people have tested that the AS5 is not electrically conductive www.overclock.net/t/140813/artic-silver-5-is-not-electrically-conductive

[@jhagge2]

I rate 8/8 best troll NA

[@tikkelbikkel]

Jordan, have you ever thought of building a spaceship? Also, Kevin looked absolutely fabulous as usual. But you're still my favorite Jordan ;)

[@sabrinadesousa9752]

Hey Koots! Could you start a playlist that teaches us how to put a PC together, like a beginners guide?

[@James-134]

The way he put on the thermal paste made me cringe...

[@Plague_Doc22]

Find it difficult to see any adult finding Kevin funny. He's forcing humour on everything and is just childish. I bet the average creature fan loves him tho as they probably are around 15 years old.

[@ThisIsFuj]

You really think any adults find PewDiePie funny? And yet he has the most subs on KZbin. Childish humor is hilarious and awesome.

[@salikali2]

I am 22 and i like Kevin.

[@mikesw88t]

Jordan is worse. He thinks he is funny but he is just annoying.

[@Gosgos666]

TheAllstar22 and what are you 16?

[@Plague_Doc22]

Gosia Cegiełka I'm actually 26 but yeah.

[@SalvadorDolbyvsZAWARUDO]

"I can't install the operating system without a CD drive!" ...They do know you can install an OS from a USB, right?

[@lolaismydogname]

JORDAN I LOVE YOU HAHAHAH! The thermal paste and ram might have been a bit.... Messy.... But whatever you made a sick ass PC for Kevin to enjoy. LOVE YOU GUYS! :D

[@ReconFlowJoe]

Kootra's always putting wires next the fan. KOOTRA YOU HAD ONE JOB! You've done this two times already. Make your Father proud!

[@rustyshackleford4622]

Everything you did wrong: 1.) Holding the motherboard against on your clothing. You can generate statitc electricty and fry it. 2.) Removing the motherboard stickers. Just leave them there man, they're not hurting anything. 3.) You installed the heatsink before you mounted the motherboard in the case. It's much eaiser to install the backplate once it's inside. 4.) You applied the thermal paste in the most piss poor way I have ever seen. You only need to apply a pea sized drop. 5.) You installed the memory wrong. Check the motherboard maunual to learn the best configuration. 6.) I noticed the standoff are not pre-installed in that case. I really hope you installed the standoffs or you will fry your motherboard. 7.) The holes in the motherboard tray are not for show, they are for cable managment. Use them. 8.) You plugged the CPU power into the wrong port. The bottom port is there for overclockers who need more power. The top is the best to keep cables out of the way. 9.) The grinding you hear is a cable caught in a fan. Always be sure cables are away from the fan blades. You can sever cables this way. How this monstrosity was able to post is beyond me. You ignorant, rich, manchild; do not "yolo" through a build just to entertain your even more so ignorant subscriber base. You could have destroyed $1000.00+ in hardware.

[@PastaM0nsta]

damn, you're angry as fuck lmaoo. You should care more about yourself rather than how some guy you dont know builds computers

[@Ceebs1]

Lol you know theyre probably just doing this for entertainment perposes right?

[@aileetra]

Goodness. You should do a how to vid for computer builds. It'd be helpful for people who want to learn.

[@PastaM0nsta]

what he said anyone who spends 2 hours learning how to build a computer knows, just look it up on youtube

[@Topcomment14]

he was plating around the whole time, also he knows how to setup/build or no one would use the computers he creates, or they wouldn't last as long as they do.

[@bigcat12354]

ITS NOT SINGLE CHANNEL MEMORY WHY DID YOU INSTALL IT THAT WAY

[@ViscountBiltmore]

Every comment is literally a paragraph or two of what Jordan did wrong. Shut up and let him have his pc building time. Everyone makes mistakes, people saying he failed and crap, Can you do better?

[@BOONDOCKVERITAS]

The issue is this very expensive rig is not assembled properly. Yes, it booted. a chimp could build a rig that gets that far, we just watched it. Huge problem is the ram placement. the cables and paste are meh. and yes, iv built several rigs that would put this to shame. if you would be ok with this job, good on ya fool

[@PappaLitto]

Yes, most people in the comment section can.

[@ViscountBiltmore]

BOONDOCKVERITAS I wouldn't but still let him enjoy this.

[@bruhtholemew]

Yeah we could do better, plus this is Kevin's pc, so it's kind of rude for him to screw around.

[@ViscountBiltmore]

BOONDOCKVERITAS He'll most likely fix it probably just screwed around for laughs.

[@nickflig]

I love the ROG BIOS layout. I got an ROG board myself, and there's seriously nothing you can't do with it :)

[@xVayzi]

Seeing 2400 MHz RAM going into a PC being top of the line feels crazy. Almost as crazy as Jordan installing the RAM in single channel. I miss these guys so much.

[@valtsu03]

he don't know how to install ram

[@valtsu03]

2 rams are supposed to install slot/ram/slot/ram

[@valtsu03]

*2 rams'

[@himanhiman15]

Valzu pelaa that just allows for more flow... It doesn't matter with all the cooling equipment they had...

[@valtsu03]

k

[@JellyMCALPHA]

+Trik Prestige No, it would allow for dual channel instead of single channel...

[@jonmejia3883]

Anyone got links for the all parts they used to build this? Or at least names?

[@TJG421]

i7-4770k corsair HX850i psu MSI GTX 970 Asus ROG Maximus Extreme VI -ram you can see it in the video. simple -some shitty heatsink -case doesnt really matter just follow motherboard size

[@jonmejia3883]

ThoseJerseyGamers Thanks man.

[@tungbui3948]

Please tell me you are not going to follow this build... that rog board is very overpriced for normal consumers

[@TJG421]

Yeah get a different motherboard same socket of course

[@GameGuy6400]

ThoseJerseyGamers They don't make the 4770k anymore, he either bought it a couple of months ago, or it was a 4790k

[@BIOTREX]

I've never build a pc but I can see massive mistakes here....Honestly I thought watching this would help me learn how to build a pc...oh well back to LinusTechTips

[@MisterNBG]

17:07 is why I love Kootra

[@camfetamine]

Mother of God that much thermal paste could paste all of the computers in the office!

[@Ziggy0120]

that thermal paste technique kootra used made me cringe hardcore.

[@JohnDanielTorrance]

So, what ever happened to Dex?

[@DemonsSoulsSuperPro]

he died

[@ameliastevens2453]

Zoe Thompson rip in peace 2014-2014

[@JulieAcePe]

He's in England

[@thewhitejoker2000]

Zoe Thompson of herpes

[@inspectorkemp4]

They're working on getting him the required paperwork so he can move to Colorado. Because he's British, he can't just move here. He basically has to get permission from the US Government.

[@Mcninjaguy]

Way too much thermal paste. You need about 1/4 to 1/3 of that.

[@xXKENNETH108xX]

Boozy Aleks Yeap, Just pea size.

[@Mcninjaguy]

Boozy Aleks Yeah and it'll spread by the heatsink being pushed down.

[@corneliusm3054]

This was a very good video, I was very interested in it and I thought it was really good, keep up the good work and good job.

[@TauonTu]

After watching the build my only thought was 'If this is how Jordan builds a PC I don't even want to think about how the others would do it"

[@Cup_70]

Dude, the ram...

[@Cup_70]

Dude, cable management...

[@Cup_70]

Dude, Don't spread the thermal paste.

[@Cup_70]

Dude, Zalman...

[@kmarcie]

MrGlorifiedCake zalman is great stfu

[@SilverrrV2]

Jordan... Jordan... JORDAN. Anti Static wrist strap... Please. This hurts to watch.

[@PerfectlyFunctioningAI]

lol is that a real thing? hands dont usually gain static electricity

[@SilverrrV2]

MrDisgruntledGamer1 Yes it is. It's not just your hands but your body. Static electricity and small charges can still run throughout your body. It's a good idea to "ground" yourself before touching components. If you don't then there's a chance you can damage/ shorten the life of a component. By all means if Jordan had Grounded himself before the build then its fine but its better to be safe then sorry. $7 for a wrist strap could save you a few hundred.

[@puritech1609]

SilverrrV2 It's really only necessary if you live in a place where there may be large static build up. Just touching you computer case should be fine to discharge. MrDisgruntledGamer1 Pretty sure static can build up anywhere on your body lol

[@SilverrrV2]

Puri Tech Yeah, well i'm around furry pet and pretty much my whole house is carpet etc. So I'm pretty much at risk, So seeing this gets my jimmies rustled. XD

[@PerfectlyFunctioningAI]

Puri Tech I know that but i really almost almost never experience static electricity on my hands, EVER. Its been years since ive shocked anyone with my hands.

[@nicksmith7192]

Thermal paste application 2/10. Must put more and spread it more.

[@nicksmith7192]

Dude I was joking MMORAMPAGE XD

[@nicksmith7192]

His thermal paste application is horrible he put too much and speed it around so I was just making fun of it

[@nicksmith7192]

Spread*

[@deltaregalia]

+MMORAMPAGE Yeah, you obviously cannot detect sarcasm.

[@nicksmith7192]

porunohoshi Lol

[@BlitzyNation]

Can you, or someone post the list of things in this build? Would be very interested in getting a rig sorted soon!

[@minitooth]

God damn, makes me want to build my own pc, any idea roughly how much all that costs plus the cd drive

[@kevinsrandom]

the way he put that Thermal paste on gave me cringes

[@xXcrazykid987Xx]

or rather the amount he put on made me want to drink bleach

[@damienscullytoo]

they get a ROG gaming OC motherboard and run it on stock clocks..... he put the ram in the wrong slots.......they are colour matched for a reason..... *cringe* im sorry jordon but my inner nerd is facepalming so much xD and 850 watt psu for a 970 overkill x 100 someone help me....

[@captainphobos8670]

The cable management was very very cringe worthy as well.

[@TotallyNotUni]

Thermal paste? Is he trying to melt the computer? (Payday reference?) I dont get how to computer.

[@bluestreak1231]

You guys should have kevin do the camera work. He gets all the "angles" 👌

[@powerplayer75]

Jordan's face at 2:20 was the ultimate "are you fucking serious?" Face

[@chelseac4171]

you put both DIMMs on the same channel. also didn't use an anti-static wrist-strap, on a carpeted floor. and the thermal paste is going to have hella air bubbles

[@ZipsamCreations]

The Creatures can make an entertaining video out of anything.

[@tikkelbikkel]

I love how Jordan is the DIY guy at the creatures. He's definitely my favorite ;)

[@MrChumBuddy]

lol, that underutilized cable management space at the back of the case; it's like throwing all your stuff at the back of the passengers' seats and leave the trunk empty...

[@TheHalo2fan]

That Ending tho lmao then it buffered on the face of Kevin. Holy shit xD

[@draxzers]

Those annotations are fucking amazing.

[@telluriancloud0]

i cried when it came to the thermal paste and the cable management

[@JohnisBadYT]

5:47, DON'T spread the compound, just like a rice sized grain will do it, then the presser - heat from the cooler and CPU with spread it evenly, if you do what Kootra just did, you have a HIGH chance of getting "air bubbles"

[@JohnisBadYT]

Also he didn't put the memory in dual channel mode

[@JohnisBadYT]

AND wire management Jordan, pls stap 12:23

[@YaBoiiDucky]

That Cable Management doe!

[@Eagle7z]

why did you put the ram in both single channel, if you put them in dual channel (same colors) they would run waaaay faster and actually take advantage of the 2400mhz

[@Reemuson]

Lol I was flipping my balisong when the video started just like you were in the intro. O.o

[@Ab313r]

Why get a big case like that and not use an AIO liquid cooler like the h100i? Also Jordan put the RAM in the wrong slots for it to be running in dual channel mode. And what graphics card(s) are in the computer?

[@goopyballs]

I love hearing Jordan's nose whistle to me, that sweet nose ballad.

[@MrSuper83]

Omg i have the same pc case as kevin. I'am now complete.

[@swiftlyswiv]

coming back to this after I'm able to build my pc he built that so poorly