Crosman 1322 .22Cal Shooters Kit Chrony Testing

[@mikesbackyardeh]

Your do01 on your chronograph is duplicative means same as last shot.. enjoy your videos 👍👍

[@KevinMillard68]

thanks for the info and that you enjoy the videos as well lots more on the way

[@georgethayer3533]

Marry Christmas and happy new years thank you for all the great videos and information you gave us to the year God bless brother all my prayers to you and your family for a good New Year 2021 George from California

[@KevinMillard68]

Same to you! and thanks stay safe

[@stephenbrown5650]

I want to replace the stock 1322 barrel with a 14" barrel. I can't seem to find a barrel band. Any ideas? Is it the 2289 band?

[@KevinMillard68]

you need the crosman 760 barrelband if you want to mount a longer barrel on it and while your at it the crosman steel breech if you want to have optics again

[@jerrycrowe8448]

Yo kevy have a issue, my 1322 which is like a month old but I've managed to put approximately 1500 rounds through it already. Well took it tonight and right outa the blue it's not cocking all the time and even when it does it makes a less than desirable sound sometimes not even pushing pellet out. I love this gun and have already ordered a second one as I've jumped on the mods band wagon but I thought I'd leave this one alone stock as it's been so very accurate. I guess I have to get my feet wet sometimes but I'm unsure where to start

[@KevinMillard68]

have you oil hte pump cup at all about every 100 rounds your supposed ot put a few drops of oil on it now i would only use either crosman pelletgun oil or SAE 30 Non Detergent motor oil i use the SAE 30 Non Detergent oil my self, as for cocking back check the tension of the breech screw it might have come a bit lose also check the other screws as well the rear site top screw shouild only be snug not tight tight. i cant see you having problems with the hammer or its cocking pin the sear spring which also controls your trigger its usually really tight in these guns i ususaly just put in a lighter one my self but not to light or it wont hold the cocking of the hammer been there done that check this stuff over and let me know how it goes.. then we can look at other stuff as well . also how the presser of the pumper as your pumpig does it get harder to pump each time as it should

[@TheMultiGunMan]

YES! We've got some gun action!

[@KevinMillard68]

:)

[@RCVHX22]

Yes!! very cool kev thanks for sharing it with us, like#8

[@KevinMillard68]

thanks man

[@jerrycrowe8448]

I absolutely love my 1322 shooters kit.I haven't moded mine yet as originally intended and have been having such a blast with it. I know that the pumping can be a bit monotonous but hey everything has a positive and negative. I've ordered a bunch of upgrades but I think I'll have to get another one to do. Be safe and thanks for sharing

[@KevinMillard68]

thanks man

[@ShenRC]

Wow pretty powerful for a hand gun .22!

[@KevinMillard68]

yup shes got some snot power

[@zwayne5143]

10 shots equal 100 pumps, great workout for biceps and chest.

[@KevinMillard68]

yup sure is beats lifing weights

[@stephenbrown5650]

thank you

[@KevinMillard68]

You're welcome

[@stephenbrown5650]

@@KevinMillard68 It looks like the 760 is .177. That barrel band will fit on the 1322?

[@stephenbrown5650]

@@KevinMillard68 Hi Kevin. I have replaced the plastic breech with a steel breech from Crosman on my 1322. I have a problem with the head of the set screw sitting lower than the loading channel of the breech which makes the pellet drop down slightly when crossing over the set screw and entering the barrel properly. The pellet gets jammed at the barrel opening. Have you ever come across this before? If so, do you know of a solution?

[@stephenbrown5650]

I meant to say 'Breech Screw"

[@prabnoor6607]

Could you show us all of you guns

[@KevinMillard68]

eventually

[@jimmieparker7694]

Scopes ? Mounts ????

[@KevinMillard68]

be more specific

[@salsashark8876]

@@KevinMillard68 i believe they were asking what type of scope and mount you have on your 1322 in the video. Curious myself as I came across your videos looking to see about putting a centerpoint 4x32 scope on mine and others thoughts. Was curious if you kept it on there and if you still think its good on the 1322?

[@KevinMillard68]

@@salsashark8876 its a crosman 3x9 center point