#1 Method of Refill HP Cartridge 60 61 62 63 64 65 66 67 68 21 59...

Basic Drill-n-Fill refills for HP Integrated Cartridges, using HP 60 as an example. The video uses an EZ30-T kit from BCH Technologies to refill an integrated HP cartridge. After the refill, printers won't read the new ink levels. Don’t be alarmed if you don’t see a full tank on your ink levels. Ignore the "low ink" warnings and keep printing. The ink monitor will be turned off after the page count reaches a certain level and won't bother you again. There is no need to reset the cartridge.
EZ30T: bchtechnologies.com/first-tim...
Related Topics
#hp62
#hp61
#hp67
#hprefillkit

[@texast7062]

Thanks Kevin! Very easy to understand and I was able to clean both cartridges and get the ink flowing after a long time being unused. With a little bit of patience, it worked just as you explained. The vacuum technique is fantastic!

[@lynn8524]

I followed his clear instructions and refilled my very old, empty, color ink cartridge. Soaked it in a small amount of very warm water first, filled the ink, covered the holes, used my vacuum hose, and it worked perfectly. Thank you!

[@oolum]

Thank you! You are the McGiver of Ink Refillers! You may not recognize the reference. McGiver was a very resourceful guy who could make anything work using only the items around him at the time.

[@BCHTechnologies]

Thanks! 😊

[@watercraze2000]

Because of you I am going to try this. I had so many say it is too hard to mess with. U do make it look easy. But I am going to try. I got my order in today and did get it through BCH as u mentioned. And got the cleaner as well. Thanks for your help. Hope I have just as good luck with it.

[@lalitafaroli]

This is the best video I have seen on refilling cartridges. Thanks.

[@richardjensen4874]

Thanks for the suggestions on unclogging and refilling. Very informative.

[@wendydee3088]

Thank you so much! I bought the refills and the ink would NOT come out. After using your vacuum method one is working great. The other I over filled so I'm trying the soaking method to see if the excess will drain. Seems to be working at the moment, cup is pretty black lol.

[@tigerlilly6895]

Depending on your printer, if your printer is not reading the cartridge or says it's corrupted but you just refilled it you can do this but at your own risk: When refilling the cartridge take off the top paper completely, you'll see a circular indentation to the right of the refill hole. After refilling use a tip of pen cap or something strong and press that circular depression 10 to 15 seconds, but do not puncture it... That resets the cartridge and usually you can use again with great success...

[@JoseDelgado-ho1cf]

It takes me about 30 cleaning prints to get everything right- but it works! Cool.

[@angelcdp]

This is the best video I've seen on refilling ink cartridges. Thank-you.

[@briannoecker7149]

Great video! Articulated very well. Thank you.

[@aros007z]

Great video, I will be ordering your kit, thank you!

[@pengxu1914]

vaccum with paper towl worked perfectly! Thanks!

[@qbertatx]

Ordered my kit. Going to give this a try Thanks!

[@mvtservice5473]

You were a research assistant! Only fresh cartridges can be refilled!

[@Mountaincarole]

Thank you Kevin! Awesome tutorials. You are making a big difference for the environment too!!

[@emmavimond3612]

You are awesome! I saved so much money thanks to you !

[@eltordillo2826]

Thank you for your good explanation! You just got a like and a sub!

[@01Hudesohn]

Great Video how to do it right and all other Important Information. After Refilling, the Printers will no longer read the new ink Levels.. You don't need it either. But if you want to try it. HP Printers can only store ever Cartridges (4 I mean). Reset should go if you put in one after the other. The 5th must be the refilled one, which is then shown as a new one with a suitable stand. Since I was missing the cartridges and I don't care about the display, I couldn't test it.

[@brianhickey3196]

Thanks Kevin. Your video was very informative and awesome. Talking about pain points and things to be aware of. I like your sassy dry comments too (e.g. toothpick for dental hygiene). :-) Where did you get your little steamer? That looks fantastic!

[@MS88nyc]

Thank you. Because you spent the time to make this video, I ordered your products via Amazon. Got the kit and the combo with the 3 blacks with the 3 colors. Great prices, informative video, nice guy, thank you!

[@jwgmail]

Thank you Kevin, just ordered from BCH!

[@BCHTechnologies]

Fantastic!

[@Orlanzepol123]

Very helpful video. Thanks

[@katharinegere5676]

Great video, thank you!

[@irisshadi474]

very helpfull thank you sooooooo much... i was clogged

[@thepeopleschoice5892]

hey one question can I try ciss tank for my Canon mg 2500 series. can u make a practical elaboration on it Pls.. I have frustrated refilling and buying too costly

[@XsavioR38]

Great video ty.

[@doccpu7]

Several hp inkjets remember the last 3 or more cartridges and keep complaining that the cartridge is empty by its estimation process. Keep 4 or more cartridges around and install 3 or more old ones till you add the "NEW" one. it will see the last couple and think it hasnt seen the "NEW" one before.

[@georgeannbyrd1681]

I just keep all my empty cartridges just for the purpose of only needing to do one mass refill job that will last me a few months.

[@SoliAndAndre]

If you want to create several backup sets of cartridges, how do you suggest they be stored? Thanks!

[@valorousowl]

thank you sir

[@mariastamates4003]

Absolutely, Great Video! Have a question. I have HP 62 Instant Ink Cartridges and planning to cancel my subscription. How can I bypass the Instant Ink cartridge reader/scanner so it will work like a standard HP 62 Ink Cartridge?

[@shanetrain9791]

You are so awesome not making me go buy more

[@renzo9553]

I do this and it saves lot of $

[@damianomartucci9814]

And what do you think about using nitro thinner for unclogging cartridges? Does it harm plastics?

[@wylamchenry470]

Can you fill the cartridges with tattoo stencil ink and print ready to go stencils. Make a video and show me if this can be done

[@camsmith1519]

does the kit that you brought work for the HP67 cartridges?

[@designbyrawaz]

Really helpful

[@BCHTechnologies]

Glad to hear that

[@snowy3157]

Can you teach us how to use/install a CISS on HP Deskjet 4535?

[@jvjivi6047]

hi ! itried this on my hp deskjet3630 cartridge 63 but it says that the ink is still low and it print only 1 ..what can I do about it ? please help

[@stephanieayarza5190]

Hello Kevin.. I need help.. I saw your video on how to refill them, and I thought it was pretty easy so I bought the ink you recommended and when I tried to put it back inside of my Hp Envy Photo 7858 it reads it as counterfeit or used and doesn’t print out any color...I don’t wanna spend so much money every time buying new ink.. what should I do ?

[@brittany9914]

Lol "just don't tell your girlfriend" hahaha. Thank you Kevin!

[@michaelcohen7011]

This video title suggests that the EZ30-T will work for a 67 cartridge but the website only lists the 60 61 62 63 64 65 as the cartridges it can service. Will the EZ30-T work with a 67xl cartridge? If not, what's the kit for a 67xl?

[@sonati6952]

Great 👍

[@imanawaseem1747]

Thank you for the informative videos. I just probably save 150$

[@muaythai4lifelife]

Hi there! I have a question, maybe a stupid one. Is it technically possible to refill a cartridge, like a hp 305 for instance, directly from the printer, without taking it off? Or its risky because of the pressure with the siringe that might cause a leaking from the print head? Maybe it would be hard only to take off the plastic cover for the siringe.. apart from that I think it would be possible. Thanx!

[@renzo9553]

anyway can I refill pigment ink instead of dye ink even if I total flush them all filter,nozzle and sponges?

[@KryaDiere]

Very helpful thank you! My cyan ran out today and I immediately refilled all 3 colors but my printer will still not print cyan (magenta and yellow come out perfect on the test page). Is it because I need to vacuum it (I don't have the clip)?

[@BCHTechnologies]

Yes. Leave the cartridge in the printer for 2 hours. If it still doesn't print cyan, vacuum it.

[@KryaDiere]

Ok thank you!

[@Richard-se3ju]

Where can I buy that transparent "case" that is on the top of the cartridge?

[@T_Burd_75]

I purchased the kit from ebay recently to refill my HP 64 color and black cartridges. While refilling the black cartridge had perfect results, refilling the color cartridge didn't go as well. While the cyan and magenta prints okay, I cannot get the yellow to print at all, regardless of what methods and tricks I tried. I tried them all. If I set the cartridge on a moistened paper towel, the yellow comes out just fine. But it just won't print. At first, the magenta didn't want to print at all, either. It was intermittent. But I'm not surprised. Since the days of Lexmark printers, I've never had luck refilling color cartridges, only the black cartridges. My last three printers would not print yellow after refilling. It only seems to be the yellow. What gives?

[@BCHTechnologies]

It doesn’t sounds like clogging. It’s more like ink pressure imbalance. Use the priming clip to draw more ink out and thus remove extra pressure. Leave the cartridge in the printer for a day, then print 5 to 10 pages. Don’t print full color page, just regular documents with color figures. It usually takes care of the problem.

[@blogmemama]

How to convert to CIS. My printer is HPdeskjet 2621

[@xastheworldfallsx]

I would really love to get this kit but I looked on your site and couldn't find one for the HP 67 ink. Is there a kit for that? Or would this work for that as well?

[@cassielavallee389]

I used the one mentioned in the video and it worked for me.

[@TexasCowboy6]

How many ml does an HP black 64 XL take? How about an HP color 64XL?

[@brotherblog5291]

Can I Used any ink for refilling the cartridge

[@vinceabel9892]

Does anybody know if an HP 63 ink cartridge I can put a 65 minute and where work

[@betsys6976]

How much ml do we put in for each color

[@lukedenault9776]

Will the printer stop me from printing at some point because it is saying it is out of ink?

[@HJKelley47]

An Amazon customer informed me that bulk ink refill kits do not work on the HP Officejet 6310-All-in-One printer. Does the BCH Technologies refill kits work with my particular HP printer?

[@BCHTechnologies]

The bulk ink works fine if you know how to use it.

[@laurieshepherd6941]

I purchased ink to refill my 67 xl cartridge can I use that same ink to refill my dad's 63 cartridges?

[@Lisas_Chatroom]

Never thought of the vacuum cleaner... thank you :)

[@Lisas_Chatroom]

Kevin, I refilled but it's not working... it is coming out of the bottom but when I put in printer it works on one sheet of paper and then no ink. Could it be I put too much in? How can I fix? Thank you...

[@catslivesmatter1268]

@@Lisas_Chatroom after refilling any cartridges , it's recommended to let it sit in the printer for a period of at minimum of 1.5 hours , however this video is completely wrong ! Look up your original cartridge refill procedure ! You don't have to drill holes in any cartridges and sometimes it's better to check with your local Drugstore and get it refilled for less than 3 dollars ! This video needs to be removed ! Never use a vacuum cleaner on a ink cartridge !!! Please ignore this guy

[@ellenquinn1110]

Hi Your video says this technique works on the HP 65 cartridge, but the product isn't listed on your website. Do you sell a kit for the HP 65?

[@BCHTechnologies]

It is here: www.bchtechnologies.com/ink-refill-kit/refill-kit-for-hp/first-timer-ink-refill-kit-by-bch-for-hp-inkjet-printer-cartridges-60-61-62-63-64-65-everything-included-for-an-easy-refill-4-color-black-kcmy-priming-clip-tool.html

[@calliewilliams9221]

Can I fill my ink cartridges with sublimation ink? If so, can I suck old ink out with the vacuum method!

[@jainlau]

Hi, have you done that before? I m just curious... as i wish to use my HP deskjet to do some sublimation project too..

[@Ahmedpakido]

I did the same thing but ink was coming out from the front of the cartige

[@luisgrippa742]

Hola lo hice tal cual nada mas que la tinta a color cuando voy a imprimir solo imprimi en amarillo alguna ayuda?

[@layzaannepascual9865]

Hi Kevin! I'm planning to refill my HP 64 cartridge is there anyway i can know if the cartridge is already refill? Do i really need to do it 7 times? My ink was not dry i just need to refill them mainly the tricolor one though. Thank you!

[@BCHTechnologies]

I am not sure what you mean by “seven times.” However, if you bought a remanufactured cartridge, it is definitely been refilled before.

[@InvokedAlbaz]

How do I get the printer to reset the ink level of the refilled cartridge? It still says it's got 1 square left.

[@studentsos7438]

Hi Kevin, i have tried it with my printer envy 7155 but it does not work out. The ink is still low and it does not allow me to print at all. What should i do now?

[@BCHTechnologies]

When you say "does not allow me to print", is the printer working but the print out is blank?

[@urbasantiago]

Dear Katherine, I have the same printer and is thinking of buying this kit. Have you ever managed to make it work with your printer? Thank you.

[@hossammostafa128]

I refilled hp 123 Tri Color cartridge in hp deskjet 2620 but the ink level indicates that it is empty and the printer does not print anything , when i give it a printing job , it blocks it. I searched on internet and i discoverd that hp blocked refilling old cartridge ,so i need a way to reset ink level or make the printer read the old one as a new one. could you please help me ?

[@Joinyujoe]

Hossam M. Mustafa I end up same thing like you and I buy new printerT^T

[@lfuentes4098]

Im confused as to why you hold it sideways.

[@gavins7542]

Can you keep refilling the cartridge forever? Or will some parts of it die at some point?

[@BCHTechnologies]

Each refill puts stress on the cartridge. So less refills = longer life. Regular people can refill 3-5 times (

[@gavins7542]

@@BCHTechnologies so is this the right kit to make them refillable? www.bchtechnologies.com/modification-kit-for-making-spongeless-cartridge-with-hp-integrated-cartridges-60-61-62-63-64-65-66-67-68-69-70-as-rfc-hpsq.html

[@milagrorivera8904]

My printer uses 65 can i use 64

[@wadeputtbrese4049]

My ink cartrige leaks after trying this. and I am getting huge ink blobs. do I need to make sure this is Air tight, I could not understand and forgive me, but did you say, It does need to be air tight or it does not? Thank you

[@BCHTechnologies]

No. No need. You overfilled. Check out my newest video showing this.

[@braidzbyleynah]

Ok, so even though you used the 60 cartridge I can use the same exact method with the 63? I have a hp officejet 3830. When I print I still get a little black but no colors. I'm fairly certain there aren't any blockages so once refilled it should print fine correct? Thank you.

[@BCHTechnologies]

Yes, same for all integrated cartridges.

[@BCHTechnologies]

There is a new video that I showed how to refill 63 and how to troubleshoot. You can see my video upload and find it.

[@braidzbyleynah]

@@BCHTechnologies Thank very much for replying. I will check it out. I put my order in yesterday, looking forward to it. Have a blessed weekend.

[@sureshnallu3897]

Can we refill the cartridges which came with printer. When I asked to refill centers they told me that cartridges which came with printer will only fill 20% and they asked me to buy new one and next time onwards we can use for refill which will have full capacity. Thanks

[@BCHTechnologies]

Haha, that’s bunch of bulls. Yes, you can refill the starter cartridge.

[@sureshnallu3897]

Kevin's Ink & More Thank you

[@Gary_G]

Cannot get HP63 to print. Ink comes out of bottom of cartridge with tissue.

[@iiparachuteregiment8800]

How can you bypass Instant Ink message???

[@higherselfbao8876]

Kevin 求助。我自己refill 了HP ENVY 4501 黑色的墨合二次，第三次refill 开机后，打印不了了，频幕显示”The following ink cartridge(s) must be replaced ",然后屏幕下面一直显示运行搜索的小符号死在那里了。请问我该怎么办？电脑里打印软件里说是黑色墨合失败。非常感谢你的频道。墨合 太贵了，实在买不起了。

[@NaughtiusMaximu5]

so i just switched to a linux pc, and it didn't tell me low or no ink, it just tried to print

[@here_we_are1427]

Hi Kevin I have refilled hp-65 using same approach for my printer deskjet 2620, but it is still showing ink low and not allowing me to print 😔

[@BCHTechnologies]

Yes, it's going to do that. I think I covered it in this video.

[@gracetamayo399]

Pls help me, i refill hp 63 before its working but now not working anymore it keeps blinking.. the estimated ink shown empty.. please help me what to do? Tia

[@BCHTechnologies]

If you print a page, what kind of error message do you get?

[@Akearsing0603]

So we can't just pierce the sponge hole for black? We have to drill a hole in center?

[@BCHTechnologies]

No need to drill.

[@yeabilo1989]

I refilled my HP 62 Black Cartridge for HP Envy 5660. HP Envy wont allow to reset ink level. HP Envy 5660 is a touch screen printer. Dont know if there anyway to reset ink level. anyone has idea how to reset ink level for Envy 5660?

[@BCHTechnologies]

You don’t reset it. Just keep using it.

[@cameltoeinspector6015]

how many milliliters of ink goes into each color compartment of a hp 60 standard size color cartridge?

[@BCHTechnologies]

I will do 10 ml on black and 3-4 ml each color

[@boogalingous1]

You need to cycle the cartridges to reset the chip.

[@ic3dragons223]

how do you cycle them? Let it run out? I cant seem to reset them :(

[@emeraldgreen3280]

HELP! I have refilled mine twice within the space of 2 weeks to overflowing. I have cleaned and blotted the excess from the top and bottom of the cartridges, but it's not printing the correct colours and I've even had to re-fill my black after printing 30 pages and it's now not working at all!

[@BCHTechnologies]

See this video, it has better troubleshooting section: kzbin.info/www/bejne/qWKcqqOHZddles0

[@Robbyfrags90]

I need a priming clip for hp67 and I can't find one anywhere

[@BCHTechnologies]

It's the same clip as all other HP's.

[@True5diy]

This example with the HP 60 Color is not compatible with HP 63. The 63 has Yellow on the left chamber not the top like this example shows.

[@lady33357]

please help mine says at least one of the cartridge's has a prblem.hp envy 4520

[@BCHTechnologies]

What does the error say?

[@salehsadeghi566]

hi I have problem with damn 21-22 cartridges ---is there any bypass on chip or board of F2180 for bad cartridges error?? printer works with new cartridges but after 150 pages cartridge led blinks always....................so PLZ a bypass for badcartrige error

[@BCHTechnologies]

See the new video that I made.

[@daniellevosburgh1530]

How do you get the printer to say ink levels full?

[@snowday7442]

Is unpossible.

[@FoxyStealth]

How many ml on each color?

[@BCHTechnologies]

About 3-4 ml each color and 7-10 ml black. If you have the squeeze bottle, 3-4 squeezes each color and 7 squeezes for black.

[@robertbutler8004]

Here is a good example of not to let your cartridges dry out. Refill before they dry out.

[@andymohammed4393]

how to reset hp 2675 reading low ink

[@BCHTechnologies]

You can’t. However, it will allow you to keep printing

[@yavonae]

HP makes their money on the ink cartridges. The cost of the color 67 cartridge is now $20. You will end up paying more for ink than the printer itself. AND HP has applied a chip on the cartridges so they are non-refillable. I've tried refilling them and it didn't work for me. They say you need to reset the chip. .?

[@imperfectcortez7749]

How do you reset the chip

[@axonis2306]

That's why I got an Epson Ecotank printer. No more messy refills, clogs, steaming, vacuuming, spills and finally cartridges that simply don't work.

[@BCHTechnologies]

There will be clogs. I will do another video for unclogging EcoTanks, steaming, vacuuming, sucking, flushing...

[@axonis2306]

OK, but please try to be neat. In most of your videos you make a mess even when you fill refillable cartridges.

[@BCHTechnologies]

Good point. I will try.

[@shaaronie]

I have one of those sitting in a corner because it prints streaks of ink at the bottom of my prints and claims to be low ink when I just filled the damn thing. Expensive junk!

[@jamessoos5753]

Hope you print often with the eco tank or the ink will clog the printhead

[@mohammadfairuz2323]

あなたが好きなすべてのグループメンバーに投票することができます

[@hannahdiel]

I dont have vacuum cleaner

[@sigitwaskito592]

Bro, HP ink 65 and 67 it's same or not?

[@BCHTechnologies]

No they are different.

[@sigitwaskito592]

@@BCHTechnologies thanks bro

[@sigitwaskito592]

@@BCHTechnologies one more, i have liquid ink(bk & color) cannon G4000. Its okay or not if i refill to hp 67.

[@jwgmail]

LOL wife or girlfriend's steamer

[@andyllake7482]

「内容を明確にする必要があります」、

[@cejuvlogs9766]

Scripture: "By humility and the fear of the Lord are riches, and honour, and life." Proverbs 22:4 KJV