EASY DIY 4th Brake Light | GR86/BRZ

JDM Style 4th Brake Light Kit: www.driven.med...
Renegade 4th Brake Light: www.driven.med...
Reverse Light Overlay: www.driven.med...
Aftermarket 4th brake lights are one of the most popular modifications on the GR86 & BRZ, but what if you just want something simple and functional? That's where the Driven Media JDM Style 4th Brake Light Kit comes into play! It gives you everything you need to add a functioning 4th brake light to your OEM reverse light assembly.
Driven Media Merch & Overlays:
► www.driven.med...
►GR86/BRZ LED Upgrade Kit: www.driven.med...
►GR86/BRZ Reverse LED Upgrade: www.driven.med...
Discounts
AeroflowDynamics
► Use Code KEVINVO for 5% off www.aeroflowdy...
Beat-Sonic Amp
►Use code KEVINV20 for $20 off your order! www.beatsonicu...
Dress Up Bolts
► Use code KV23 to get 10% off on www.dressupbol...
3d Floor Mats
► Use code "KEVIN3D10" to get $10 off on 3dmatsusa.com/...
2022 TOYOTA GR86 MOD LIST:
»$35DIY 4th Brake Light: amzn.to/3SRG3L8
»Positaps: amzn.to/3SRAQTl
Bride Stradia III Seats
Sayber Design Carbon Fiber Front Lip
FactionFab F-Spec Coilovers
Cusco Strut Tower Bar Front
Cusco Strut Tower Bar Rear
Cusco Front Lower Control Arms
Cusco Adjustable Rear Lower Control Arms
Cusco Adjustable Rear Toe Arms
Cusco Rear Trailing Arms
Cusco Rear Upper Lateral Control Arms
ARP Extended Wheel Studs
5mm Wheel Spacers (Front)
Yokohama Advan TCIII 18x9.5 +45
Kumho V730 255/35r18
ECUTEK E85 Tune w/ Graham from Boosted Performance Tuning
Compressive Tuning Carbon Fiber Engine & Fusebox Cover
DressUpBolts Stage 1 Engine Bay Titanium Hardware Kit
Perrin CAI
Verus Engineering AOS
Verus Engineering Oil, Coolant, Washer Fluid, Brake Fluid Caps, and Cam Sensor Covers
Tomei Type D Dual Exit Catback Exhaust
Circuit Demon Custom Headlights
JDM Clear Sidemarkers
Twins Carbon CF Center Console, AC Vent, Steering Wheel Covers
FOLLOW ME:
►Instagram: / thekevinvo
»Music I use: share.epidemic...
Disclaimer: As an Amazon Associate I earn from qualifying purchases.

[@MajorAddiction]

It's not a Kevin Vo video unless he takes a tail light off

[@JesusIsLordAndKingOfKings]

i want a GR86 so bad. its hands down my number one favorite car.

[@aetherkiller]

You should also consider adding a wire loom to the kit, it wouldn't be too expensive and it would help a ton to prevent the wires from rubbing

[@240sxdriver]

Great video Kevin. For those that live in high precipitation areas like me I'd highly suggest getting a bottle of LIQUID ELECTRICAL TAPE to seal the splices and prevent any potential moisture corrosion. Also, I would advise against using WD-40 even though we all have some laying around. Instead, get some Super lube as it won't swell up the rubber components over time as it's not petroleum based. Pin this if you desire to help everyone out!

[@Abbayipyip]

I look forward to these videos every day! Thank you for the great educational content!

[@KevinVo]

Glad you like them!

[@footyvids8139]

Thank you for all the info on the brake light. I didn’t know US models didn’t come with a light in the middle.

[@MACGR86MT]

Kevin, thanks for this video. I purchased the kit and the install went smoothly. Love the look on my Halo GR86

[@Gazoo86]

Can you combine a this with the f1 blinking module?

[@immunity4soul]

I just did mine it looks sweet with the dark smoke overlay and new led lights. Thanks man.

[@KevinVo]

Glad I could help!

[@DylanTK]

Noble makes a $15 pnp harness that you can use with 4th brake lights/fogs (no taps required). Either way, great content as per usual!

[@ThatSubaruDude]

Love your videos bro!!

[@TheSlvrGR86]

Can you change the LED build out for a halogen bulb? It doesn't look like the bulb can be changed, even if/when it goes out! I feel like for the OEM+ option, a halogen would better match the EU/Japan spec cars

[@yusripp]

love the 4th brake light. But can I make it only light up when I push the brake on? I afraid those 4th light at bottom will glare some of the motorist if only on.

[@KevinVo]

Yes, you just don't connect the blue wire!

[@jaron95]

@@KevinVo Sick, I came here to ask this same question. This 4th brake light is one of the final mods I have left to install on my BRZ!

[@ScottWakeman119]

Excellent as always!

[@ZMacky]

Hi kev blinking option coming soon?

[@driverpsyche]

Had similar kit which was available on amazon, and it saved my rear many times. That extra, bright stop light, located in odd place, makes ppl react to it much sooner then without. It's almost a must-have safety upgrade for our cars.

[@janlorenzabellana4206]

Kev, what's the size of the posi taps? I dropped mine in the a hole.

[@murbin.86]

Man If I would’ve known you were gonna sell these I would’ve waited to buy your kit :(

[@Yoyo86ix]

Same 😭😭😭

[@AlphaCollects]

Would this affect the warranty?

[@IWFlash]

Just did this install…you certainly make it look easy😅 but it went well. Question: my light seems to be full brightness whether I’m braking or not. Possible I didn’t tap into a wire properly? Any suggestions?

[@KevinVo]

I would definitely double check the wiring as there should be two different brightness options.

[@IWFlash]

In case anyone else has had this issue, I did finally figure it out. In the instructions from the iJDM people, it notes that different batches of lights may have different wiring colors. So I switched the red and blue wire contacts and now all is well. Maybe this is just an I-don’t-know-what-I’m-doing issue, but now it’s out there for the internet.

[@williamdrake7052]

i just bought that kit and seen how its much brighter in the dim setting. then i seen the end of the video about overlays but i can't find any videos of it.

[@sxlx]

Can we get some driving footage at night with the 4th brake light mod?

[@thomasha4799]

Hey Kevin, these would be nice if it came with a strobe function as well!

[@kixmobile]

What am I doing wrong? I've removed the tail light but for the life of me I can't get the plastic connector that connects the light to the harness apart. It looks like it should come apart with a squeeze at the top and bottom of the connector. I've tried this and even inserted a small screwdriver in the top to push down the piece that's holding it in. All with no results, it's still holding. What's the trick to getting this connector to release? ,,,(and don't say get a bigger hammer) 😎 NEVERMIND, I got it out!

[@DuanDao]

Would be a great spot for an F1 style rain light

[@nub4u423]

can I install this on a gr86 with rear fog lamp? Wanted to have a 4th brakelight but keep the OEM look.

[@mattonthewater]

Does anyone make an OEM looking replacement that does the F1 style flash like the OEM 3rd light does?

[@TammyWarson]

I am wondering why the rubber gasket that you have to smash into place and hope it doesn't leak or fall out does not have about a 1/8" slot around the perimeter so it just slots into the new hole. Also, is the LED bulb assembly replaceable if / when it fails? In other words, is it a standard type bulb base and socket? Thanks! Great idea.

[@KevinVo]

There is a slot in the base of the rubber seal for the plastic to seat into. The bulb is built in so it isn't replaceable, but comes with a 1 year warranty.

[@nemohoesz]

Can you do this on the previous Gen ? Obviously yeah but I mean with this specific kit

[@KevinVo]

Yes, works on the 1st generation as well.

[@whyautxmn2028]

Do the LEDs work one the 1st gen to replace the old bulbs ?

[@KevinVo]

Yes!

[@MrAlb4life]

Is the bulb replaceable on this for when it goes out?

[@jaron95]

If it's an LED bulb you're more likely to get a new car before the bulb burns out.

[@cartechh7292]

When you made the first vid a while ago. I bought the 1st gen amazon from jdmtoy or somethin. and the wire was too short 💀💀💀 hope this will be longer

[@murbin.86]

Happened to me too, I just pinned it on the tail light a bit lower and it worked

[@KevinVo]

I made sure these wires are a bit longer 😉

[@mrxc5495]

Do these also work for after-market tail lights? For example the HRS GR86/BRZ Tail Lights?

[@KevinVo]

Yup! Just need to identify the wires for the ground, parking, and brake light to tap into.

[@달여행]

Will this work together with your f1 blinkers?

[@Apeal]

yeah pretty sure I have it on my gr and that shouldn’t interfere with the 4th brake light

[@ashwilliams8903]

Sick 🎉

[@aprl]

holy shit i cannot get the rubber plug to go in. why not make the hole saw just a little bigger man.

[@gerardogomez4695]

Been watching you videos and I’ve been contemplating making some sort of content on yt, any advice?

[@KevinVo]

Best advice I can give you is to just start doing it. So many people, myself included, spend too much time over-thinking it at the beginning. The reality is that your first 100 videos people probably aren't going to watch, but you just have to grind and put out the best quality content you can and improve on something every single time.

[@GRTrueno]

❤️❤️❤️

[@_sleezii]

*Starts saving money" *Kevin uploads* .... opens wallet.

[@roylong2995]

P R O M O S M