What if I lubed them up extra slick, legs and all? Haha, good seeing you here Glarses. Can't wait to see what you do with Gloggles!
@penguinkraftz33293 жыл бұрын
Wondering if glarses would rather use a membrane keyboard or silent gateron browns, over lubed with 205g0?
@ViiiRALshortz2 жыл бұрын
@@penguinkraftz3329 most likely membrane, like one of those really premium ones or something
@hamajineo3 жыл бұрын
BRASS PLATE WITH THE FOAM OKAY I SEE U 👀
@aidn_08283 жыл бұрын
Hi hamaji. Can you make a review on the Akko cs switches?
@Keybored3 жыл бұрын
Great seeing you Hamaji! I was so skeptical about the PE foam until I did it... what kind of voodoo magic is this? Lol. Thanks for stopping by to check out some keyboard mutilation lol
@jamesnathanongkowijoyo69353 жыл бұрын
So unfortunate your PC broke right as you were about to upload a vid hopefully it'll get fixed soon !
@leem04013 жыл бұрын
Finally GMMK PRO mod! Crazy how adding that thin layer opens up the sound so much!
@Keybored3 жыл бұрын
Yup! It is long overdue!
@albioncia3 жыл бұрын
damn the sound becomes much better and might be comparable to some of the budget or more premium top mount board
@barrylinkiewich96883 жыл бұрын
It even makes that horrible clonky spacebar sound better, I don't know why some people's spacebars sound so awful on stock boards and others sound decent but the first typing test with black was awful.
@patrickp49363 жыл бұрын
@@Keybored For sound mod, do you think the thin layer of white foam + PC (instead of brass plate) would yield any results? Thanks in adv!
@IggyYow3 жыл бұрын
@@patrickp4936 I did this with my gmmk pro and it made my kb thocc more
@ssbstsfb3 жыл бұрын
I did the 2nd mod and while it sounded amazing, I realized a few keys weren't registering every keypress, I pulled my switches and used some tweezers to take the pin openings and create slightly larger holes closer to the size of the ones created by the plastic pegs and now have absolutely no issues. I think if the metal pegs of the switches are touching the foam it can potentially cause an issue, but just my experience. Just wanted to share in case anyone had a similar occurrence. Thanks for the video, so glad I saved that PE foam bag my board came in.
@Keybored3 жыл бұрын
Oooh that is a great point you bring up! I wonder after the initial press-in, we should remove then poke them larger
@dl88889 Жыл бұрын
Thanks, you save me time troubleshooting this. Had the same issue on a different keyboard.
@sharktooth3 жыл бұрын
"Now I know why Glarses loves them so much" Dead man walking right there
@Keybored3 жыл бұрын
Lol. I was thinking of sending him a bag of browns to the address he provided
@noahs9853 жыл бұрын
@@Keybored Please do that.
@ollybutler993 жыл бұрын
@@Keybored please you need to do that
@LooselyRigorous3 жыл бұрын
@@Keybored PLEASE
@xornedge82043 жыл бұрын
@@Keybored DO IT
@Aldarris3 жыл бұрын
This is exactly the kind of stuff that drew me to the hobby. I love what people come up with on the tinkering aspect of it. Great work.
@Keybored3 жыл бұрын
Thank you Aldarris! I hope the video was helpful!
@Mat-hr1dg2 жыл бұрын
Honestly: The more I see of this so called "hobby" the more idiotic it seems. Not only does this community seem to think of things that would have been a quality issue 10 years ago as a feature, their reasoning for rating certain things are just batshot crazy for any normal person. On top of that they are paying ungodly amounts of money for shit that they only heard was great but never compared.... It's a weird thing. The intro of this video seems like a perfect parody of this hobby.
@armLocalhost3 жыл бұрын
Nice mod! I did something similar. Removed extra gaskets, applied more of the Glorious gaskets, put 007 orings I had under the screw to raise 1-2 mm of height, and now it's bouncy enough for me :)
@Keybored3 жыл бұрын
Great to hear people taking the matter into their own hands!
@dylansironi22792 жыл бұрын
i did the sound mod and OMG it sounds soooo much better! thank you so much for making this video
@chrisdotdash51543 жыл бұрын
14:07 WOW that sounds AMAZING!! Super deep a full sound. Nice vid.
@Keybored3 жыл бұрын
Thabk you Chris! I was surprised myself!
@moritzniederwieser56013 жыл бұрын
@@Keybored do you think this will improve a cheap plastik case as well?
@ericqhochuli60043 жыл бұрын
Thank you man, I wish I knew about D65 gaskets sooner. I used most of the ideas from the flex mod with the Polycarb plate and it is great I really can feel the bounce when typing. I used your stage 3 mod on nk655 also, you really are gifted at this. Keep making these videos and I will keep trying out your mods making keyboards as good as they can be.
@Keybored3 жыл бұрын
Thabk you so much Eric! I'll keep thinking about ways to improve these keyboards!
@j3g2 жыл бұрын
i just modded my gmmk pro(alu plate w/alpacas L+F) less than 30 mins ago. still kinda hesitant to saw off the curved/bent part of the plate that connects to the pcb. hotswap sockets on my gmmk pro seem loose. not as tight as the one on my kbd67 lite r3 or nk65 ee(which, by the way, i followed your stage 3 mod, i love it). even if the hotswap sockets aren't a snug fit, i dont have any non-responsive switch issue. didn't have enough of kbdfans gaskets left, still waiting on my order. i doubled up the gasket w/ what my board came with, it still feels stiffer than that of kbdfans. i followed everything you did except for the sawing parts and swapping out the gaskets. i love your videos man. your actually one of the reviewers/modders i listen to and agrre with a lot of things you do/say. keeb it up!
@Crazygamer-sq1zt3 жыл бұрын
10:50 and we'll be calling- didnt finish sentance
@Keybored3 жыл бұрын
Yeah... looks like I overlapped the next audio track over it... sucks
@true32113 жыл бұрын
well it's black....
@amizan86533 жыл бұрын
I love the mods you do, they're all different from what I see on other channels.
@Keybored3 жыл бұрын
Thank you Ali! I guess I took things to a point of no return lol
@VENOM-kb8pu2 жыл бұрын
Ali the holy bastard !
@amizan86532 жыл бұрын
@@VENOM-kb8pu huh?
@VENOM-kb8pu2 жыл бұрын
@@amizan8653 You don't remember me ya wanker 🤣aliii
@amizan86532 жыл бұрын
@@VENOM-kb8pu you sure you got the right Ali?
@Adem-nl8pd3 жыл бұрын
Great video. I love this keyboard for what it is. I don’t think I could bring myself to do these mods. But, it’s still nice to see how much the community expands on this boards just to make them as good or even better than some higher end boards.
@Keybored3 жыл бұрын
:) The great thing about this hobby and the community!
@gooberlaya3 жыл бұрын
good timing on this video because the GMMK Pro went in stock available a few days ago
@Keybored3 жыл бұрын
Yup! I tried to time it with the full launch!
@trashgarb3 жыл бұрын
Amazing! Was waiting for this vid. Just in time, my gmmk pro just shipped! Great mods as always, sound mod definitely surprised me.
@Keybored3 жыл бұрын
Super surprising! I didn't think in a million years that I would say gmmk pro and sounds good in one sentence
@oOWaschBaerOo2 жыл бұрын
the standoffs btw, do not change the flex at all, if you notice they are screwed at the plate, and just inserted into the pcb, means when you flex the pcb in to the keyboard, the standofs would just sort of move out of the pcb, those standoffs are for when you remove the switches to not bend the plate outwards
@jepeu85223 жыл бұрын
That silver GMMK pro’s spacebar sounds like a wooden button from mc 😂
@Keybored3 жыл бұрын
:) the flex did improve dramatically with that one
@piranha_lol2 жыл бұрын
Free 5Head tip: If you want to do the flexible mod but dont have thicker gasket strips just open your GMMK Pro box and use the layer of foam inside the packaging. The foam is about 1.5mm thick and is very close to what was used in this video in terms of thickness and density. just cut the foam into strips of the right size! source: my brain
@andrewsteele59393 жыл бұрын
Actually perfect timing I was just considering picking one of these up
@Keybored3 жыл бұрын
:) Hope it's helpful!
@thawzie3 жыл бұрын
keybored's engeneering degree really helps him come up with these new mods... trying the PE foam on my Tofu!
@Keybored3 жыл бұрын
Haha, probably using the degree for all the wrong reasons
@mattoxlol99443 жыл бұрын
The PE foam mod is honestly mind blowing, thanks for sharing this with us. Hoping to do something like that with a Tofu60.
@Keybored3 жыл бұрын
You're very welcome!
@jesterthelegend9263 жыл бұрын
Personally I bought this keyboard knowing I would be modding it. Never had a custom mech before but the gmmk pro seemed like an easy way to get into the whole hobby. Pretty cool how you can change how this board feels and sounds with some easy trick (like the pe foam)
@Keybored3 жыл бұрын
:) welcome to the hobby! Don't get sucked in too deep!
@chewyro_chewyro2 жыл бұрын
removed plate foam on mine, added pe foam instead then tempest mod. best sounding combination for me so far! Love this
@Keybored2 жыл бұрын
:) so many different combinations are possible :)
@davidsanvlogs3 жыл бұрын
I just got the board and did the modding foam sandwhich and result is amazing ! Thank you so much
@Keybored3 жыл бұрын
You're welcome!
@gzrise59883 жыл бұрын
perfect timing, wanted to cop this board
@Keybored3 жыл бұрын
Glad it could be of help!
@suloea3 жыл бұрын
that flex cut....absolutely mad man love your work!
@Keybored3 жыл бұрын
Thank you so much!
@homerowco.19573 жыл бұрын
two things here, the foam is called poron - the other thing is, if you already use a saw why not remove the tabs completely, get 8mm poron foam sheet or eva etc., put it where you put the case foam and press fit the plate between the parts. don’t forget to also put a thin layer on the top somewhere
@Keybored3 жыл бұрын
Hmmm... that is a very interesting proposal! Essentially, make a KBD67 Lite lol. Will have to think about that one
@homerowco.19573 жыл бұрын
@@Keybored essentially a cheap mode board :P
@yuel3 жыл бұрын
Tried the sound mod on my gmmk pro and it sounds pretty nice. It makes the board have a louder and deeper tone. Great vid!
@Keybored3 жыл бұрын
Thanks Sai! Glad it worked out for you!
@paper29463 жыл бұрын
Interesting modifications. I'll have to look into them. All I did was put a 2 more layers of the stock gaskets in actually the same locations you put them, replaced the case foam with a layer of thinsulate, and then screwed the case just tight enough to close, but maintain about that same 1mm space. Plenty of flex, but polycarb plate. I'm curious about the sound mod, but I built this thing with silent switches as an office board, so I prioritized feel for my mods. Might try that foam layer in other boards, like my daily driver at home.
@Keybored3 жыл бұрын
:) Glad it worked out! Many ways to skin a cat!
@OfficialRiP4Life3 жыл бұрын
Nice videos. After such a long wait, I finally received my long awaited SA Oblivion V2 kits to remix my original SA Oblivion set along with my SA Mizu full keyset, KAT GB deskmat design, and Artisan keycaps. I also had the SA Penumbra, Dangerzone, and Carbon full sets on rotation on one Pok3r LE right now since my other 3 boards have newer (newer to my family) sets on them right now. My keyboard addiction returned at the right time and you have a new sub.
@Keybored3 жыл бұрын
Thank you so much for the sub and welcome to the community! Hope you don't fall too deep into the rabbit hole!
@keagan53793 жыл бұрын
oml sounds so much better. Great video. I kinda wish glorious would’ve made it top mount instead. It probably would’ve sounded much better stock and it would’ve left room to potentially gummy worm o ring mod it as well. Speaking of that, I’ve seen a couple of videos of people modding their Tofus to make them a gummy worm mount so that they can achieve a similar sound signature as the unikorn. I just thought I’d share this idea with you since you are truly amazing at modding :)
@Keybored3 жыл бұрын
Thank you so much Keagan! I love the gummy worm mod! Makes it sound great and feel nice! Like the Bakeneko!
@romo95923 жыл бұрын
Always good to see a new Keybored vid poppin up on my feed. My man is out here making all sorts of keyboards sound amazing.
@Keybored3 жыл бұрын
:) Thank you ROmo! I appreciate that and hope the content is helpful or entertaining or both lol
@ZaeBae222 жыл бұрын
THANK YOU FOR MENTIONING IT CAME WITH PE FOAM ALREADY I didnt know you saved me 20$ from ordering from amazon ty ty
@irzekk3 жыл бұрын
Sound mod typing test had music still playing over it. Editing blip at 10:50. Love your channel and all your work. Keep it up! Also the joke at 6:45 killed me.
@Keybored3 жыл бұрын
Yeah... Late night editing slip ups I guess... Need to pay more attention next time. Thank you for enjoying the humor!
@xDisengage3 жыл бұрын
I did the same sound mod to a portico, and it's crazy the effect it has. The mod is essentially free too since you usually have that foam laying around from older boards
@Keybored3 жыл бұрын
Lol same! I started to put it into everything to see how it changes!
@cardbored_2 жыл бұрын
Great tip on the flex cuts! I used a Dremel tool and was able to get much cleaner cuts!
@Zontivity Жыл бұрын
Thank you so much for this, did the sound verision and im so happy with the result! For sure worth it since it as you said comes with the keyboard so everyone has it available.
@IronCan883 жыл бұрын
Wow I like the second mod. It sounds amazing.
@Keybored3 жыл бұрын
It was surprising lol
@p3rsonaz8233 жыл бұрын
keybored has truly cracked the code here for the GMMK Pro
@Keybored3 жыл бұрын
Thank you P3rsonaz! I appreciate it!
@Kelvinchew083 жыл бұрын
Right on time! I will be receiving my GMMK Pro tomorrow :) Will 100% be doing the PE Foam mod. Thank you so much!!!!
@Keybored3 жыл бұрын
Glad it was helpful Gyuki!
@Kelvinchew083 жыл бұрын
@@Keybored looking forward to more content like this 👍👍 keep it up man.
@burgosmatthew Жыл бұрын
Great video. I will be doing the second mod. Awesome!
@tremolo_truong3 жыл бұрын
Hey Scott, fantastic video as always!! Forgive me for doing this one little correction, I don't like to do offensive nitpicking but I thought it might be good for you to know: The infamous Jelly board is pronounced the Jelly "Eeee-pock"(this is how Epoch is pronounced). Also, just another heads-up, there is an abrupt audio cutoff at 10:50 😂 Please, I do NOT intend or mean for this comment to come off as nitpick or offensive in any way, but if it happens to come off that way, I'm really sorry and feel free to remove this comment. Thank you for the dedication to your detailed and well thought-out content every time, Scott!
@Keybored3 жыл бұрын
No offense taken! It was a long night of editing, and I think I cut things off a bit too much... sorry!
@RGoossens2 жыл бұрын
Thank you very much, the pe foam made my gmmk pro sound so much better.
@vinrave Жыл бұрын
I preferred the dampened sound. Great job!
@vladimirpetroski70892 жыл бұрын
That final sound mod is like butter
@Keybored2 жыл бұрын
:) Thank you! It does sound so much nicer than stock for sure!
@aduntoridasful Жыл бұрын
war crimes in the first minute
@JaeyouPark3 жыл бұрын
Loving all the PE Foam mod hype! Will have to try with a tofu65 first to make sure it has no harm in terms of ESD. Great video :)
@Keybored3 жыл бұрын
:) I didn't believe the hype at first... thought it was crazy talk. Then it blew my mind... lol. I've been looking for ESD PE foam bags... so hard to find something that thin and ESD... hopefully I can find one soon and share it with others!
@obentoubako3 жыл бұрын
PE foam mod is the single greatest and easiest mod you can do, I'm glad you covered it in this video
@Keybored3 жыл бұрын
:) the results are surprising!
@sankim7143 жыл бұрын
Dude this worked! My GMMK pro sounds are significantly louder/deeper! Thanks!!!!
@Keybored3 жыл бұрын
Glad it worked out San!
@NickF1227 Жыл бұрын
I’m not sure I understand this whole premise. Criticizing the lack of Audible feedback due to the rigidity seems silly to me. If you are chasing audible feed back, why not use Box Jades or Box pinks?? Also if you want more springiness perhaps invest in different heavier switches. For my GMMK Pro I actually put a ton of flex tape on the back and betwee. The plates because I wanted to make it more rigid by removing as much space to flex as possible, while still having some give. This way you get to enjoy the feeling of the switches you are using, and adjust your preferences from there rather than trying to make all sorts of micro adjustments inside…
@mrdestroy43812 жыл бұрын
Thanks bro I learned a lot. Sounds great!
@Keybored2 жыл бұрын
Thank you! I hope it was helpful!
@kaleid19903 жыл бұрын
whooaaa the sound mod sounds so goooood
@Keybored3 жыл бұрын
Too good! I was so surprised that the thin PE foam would do such a thing!
@tylerrollo32013 жыл бұрын
It's so crazy the differences people like, I prefer my keyboards dead ass silent and want zero bounce.
@Keybored3 жыл бұрын
:) the ultimate hobby of preference it seems
@mikokb3 жыл бұрын
The black one sounds soooo good. Best GMMK Pro I've heard so far. Great video
@Keybored3 жыл бұрын
:) thank you!
@UltraBoyification2 жыл бұрын
you did my gmmk pro magic!
@Keybored2 жыл бұрын
:) Thanks!
@albioncia3 жыл бұрын
I already did the build just now and the PE foam mod is magic
@Keybored3 жыл бұрын
Truly magical right? Doesn't make any sense...
@albioncia3 жыл бұрын
@@Keybored yes I don't know gmmk pro can sound so good just with this simple mod. I sold my ikki68GB slot for this and it's worth it with this mod
@Crazygamer-sq1zt3 жыл бұрын
SHEEEEEESSHHHHHHH that FLEX though
@Keybored3 жыл бұрын
haha, yeah if you go down that path, you do get a nice and soft experience, and 2-3mm of travel. Not bad
@hrolvnir3 жыл бұрын
idk if I would attempt the flex mount mod... but holy mackerel! that pe foam is so simple and makes a huge difference. will definitely be doing this! I suppose one side effect is that the under key lighting is both more muted and more diffused?
@noahhyun31723 жыл бұрын
if you wanted you could technically cut small squares for where the leds are but I don'tt think that anyone wants to do that lol
@Keybored3 жыл бұрын
It was so surprising! A thin sheet can do something like that? Lol. But you are correct, it may diffuse the lighting a bit
@hrolvnir3 жыл бұрын
@noah - that's a good point! I personally like a muted light profile so I wouldn't but really good to have as an option
@benbequick19333 жыл бұрын
great vid! im gunna try the second method w those durock poms
@Keybored3 жыл бұрын
Durock poms are one of my favorite linears right now... Love the smooth clack they deliver...
@bidoofus79213 жыл бұрын
Tried the PE foam mod, and holy shit it sounds sooooooooo good. Wanted to make sure to mention that I tried it in case others are on the board about it.
@Keybored3 жыл бұрын
Thanks for confirming! Glad it worked out well for you too!
@consumidorbrasileiro2223 жыл бұрын
congratz your mods are really great
@Keybored3 жыл бұрын
Thank you! I appreciate it!
@rage0exe3 жыл бұрын
Sound mod is POGGERS
@Keybored3 жыл бұрын
:) I could listen to the sound all day
@rage0exe3 жыл бұрын
@@Keybored Cant get those d65 gaskets so its triple gaskets for me from what Glorious sends! Hope poly plate sounds as good with this mod
@dopamine26553 жыл бұрын
Watching you break down the design of the gmmk pro makes it obvious that glorious didn't do any product testing with external users. IIRC their mice also launched with numerous complaints. Oh, and their panda switches. You would think they would learn.
@Keybored3 жыл бұрын
It's a shame... It just needed a bit of refinement and it would have been great
@dopamine26553 жыл бұрын
@@Keybored Yea, I agree. A lot of people still like it though. They need to at least fix the sluggish stabs. Anyway, great video! It's always interesting to see you come up with non conventional ways to improve keyboards. Recently decided to try your o-ring mod.
@seanmuir51113 жыл бұрын
Just tried this foam mod. It’s incredible! Thanks!
@Keybored3 жыл бұрын
:) glad it turned out well,
@nbacX853 жыл бұрын
This worked well! Made the PE Foam mod and swapped to D65 gaskets not only on the bottom also on the top. Lubed Stabz with 205g0 (housing/ stem) and xht-bdz (wire) but was not happy so I changed to Holee Mod with 205g0. Now it sounds really nice and thockie (PC Plate + Alpaca v2 lubed/ filmed) I have a Jelly Epoch so it is very hard for the board to compete but I think you can not get more out of the GMMK Pro.
@Keybored3 жыл бұрын
Yup! It's never going to be a jelly epoch at the end of the day, but does improve quite a bit!
@AnjaSanjaya0072 жыл бұрын
uuuhhhhh i like the black one, the first one sound still pretty hollow to me, nice mod btw👏🏻👊🏻
@Keybored2 жыл бұрын
:) Yup the black one is my favorite!
@KindOldRaven3 жыл бұрын
Wth? The sound mod is so minimal, but the impact is... well pretty damn crazy to be completely honest. With such a minimal mod having this impact on the sound I can imagine myself saving up for one of these now.
@Keybored3 жыл бұрын
I know right? I thought the GMMK pro was a lost cause until this mod!
@Kizzster3 жыл бұрын
Wow all Glorious had to do was make the case a few mm deeper and improve their gaskets.
@Keybored3 жыл бұрын
Yup! And not connect their plate and PCB in 5000 spots with screws lol. Not sure why they did that... seems excessive
@RobinJamesEricBond3 жыл бұрын
I'm just gonna stick with stock once I get mine. I got the shipping notification today so it should pop up next week! Great video! Gave me some ideas to play around with. Very curious to compare the stock gaskets with something else.
@Keybored3 жыл бұрын
Yup! Check out some thicker gaskets! It really does help with the bottom out
@takoyakeys3 жыл бұрын
You’ve outdone yourself with that flex mod!! Great vid 🐙🔥
@Keybored3 жыл бұрын
Haha, Thanks takoyakeys! I thought it was crazy while sawing through the plate
@takoyakeys3 жыл бұрын
@@Keybored Innovation always requires some bit of crazy haha
@mariodearmas76312 жыл бұрын
You’re a genius m8
@klotzey3 жыл бұрын
the second mod thocc'd me out of my mind!
@Keybored3 жыл бұрын
:) It turned out very nice and really gave the GMMK Pro a voice!
@DashzRight3 жыл бұрын
Glorious Pandas (that went through my own exhaustive quality control and lubing process) with the foam sandwich mod, durock v2s, aluminum plate and GLube, it's all I needed to make this keyboard sound and feel like a 1000$ one... Thanks for the video. Btw in latest plates (brass and pc included) any aftermarket stabs will work out of the box, I didnt have to sand or mod anything to fit the durock v2s!
@Keybored3 жыл бұрын
That's great to hear! I'm glad that Glorious is starting to make small updates!
@grapechowder54453 жыл бұрын
You got a server! Nice!
@Keybored3 жыл бұрын
Yup! Finally!
@Hahnck750i3 жыл бұрын
glad i watch this before i start modding my GMMK pro (now using all stock.. yes... even the stock unmooded stabs that are SOOOO STICKY) feel like I can somewhat mix and match both the mods and see how the gpanda will feel and sound
@Keybored3 жыл бұрын
Glad the video was helpful! If you could, upgrading the stabs to a c3 equalz one is the easiest way to go. The durock v2 are great but you have to file down the plate to make it fit.
@Hahnck750i3 жыл бұрын
@@Keybored I'm gonna attempt to holee or epsi mod the goat stabs and see how they do
@zeonic_keys63753 жыл бұрын
Sweet video once again man!
@Keybored3 жыл бұрын
Thank you Zeonic!
@KCChing3 жыл бұрын
Great content as always!
@Keybored3 жыл бұрын
Thanks KC! I appreciate it!
@MrZharifsyahir3 жыл бұрын
Wow i did the foam mod to my gmmk pro sound good i mean after i watched your video. Thanks bro
@Keybored3 жыл бұрын
It is a game changer! Should have came like this from the factory!
@strykr3603 жыл бұрын
BOOM 💥 Scott, I don’t know how you figure this out but you are a magician. You seriously should be engineering keyboards for Key Cult or Bauer or doing QAQC. I literally just purchased a second GMMK PRO specifically to make into anlinear build based on your first video. There is a guy that sells FR4 plates for it, which I also bought.
@Keybored3 жыл бұрын
Hi strykr360! Thank you for that sentiment! There is a vendor in Canada called hypekeyboards that does make some nice FR4 plates! They even have an FR4 with flex cuts for many stiffer gasket mount keyboards, like the D65 and so on.
@strykr3603 жыл бұрын
@@Keybored When I bought my D65 from KBD fans, I sprang for the FR4 option, but i have to say that the plate was freaking really tight. I used lavender switches on that build, and its probably one of my favorite switches, but it would take an act of congress to get those keys out of that plate in tact. I had a few that were installed with bent pins, and when I tried to pull them out, they were mangled.
@scovich25013 жыл бұрын
Dang bro 2 in 1. Thanks for bringing us heaven
@Keybored3 жыл бұрын
Thanks Scovich! Glad the video is helpful!
@biohazardmonkey123 жыл бұрын
Thank you so much for posting this! Definitely trying the foam sandwich or Jelly Epoch mod!
@Keybored3 жыл бұрын
Good luck!
@biohazardmonkey123 жыл бұрын
@@Keybored Hello again! Have you ever tried adding tempest mod in the jelly epoch mod? This really got me so curious hahaha
@biohazardmonkey123 жыл бұрын
@@Keybored kzbin.info/www/bejne/aoWbgKltac5no5I this the tempest mod that I mean haha
@michaeljames13343 жыл бұрын
oh my the brass and the foam sounds so good.
@Keybored3 жыл бұрын
:) it really turned out well
@kansuo11443 жыл бұрын
thank u heaps man, will definitely be doing the black mod for my gmmk pro. sounds amazing and a clear tutorial
@Keybored3 жыл бұрын
You're very welcome! Glad it was helpful!
@virrze3 жыл бұрын
the madman really did it, he really sawed out the gmmk pro
@Keybored3 жыл бұрын
Hahaha... It wasn't easy... Took way too long to cut through it all
@tsprouse13222 жыл бұрын
Hey friend 👋 you should go to green door geek and get the POM GMMK pro plate or order one of the FR4 plates in sure they are good too! And maybe if you want a really nice sounding GMMK pro that’s a little more thocc put some ink black v2s in there!! I saved my GMMK pro, cuz I hated it and really didn’t like their switches…. Plus the board was so stiff. But putting the Pom plate with flex cuts as well as the inks make for a really really enjoyable typing experience! I actually put it back into rotation on my main PC over some of my other favorite boards atm… I actually used the case foam and the plate foam provided from Glorious and I did end up taping the back of the PCB just cuz it always helps the sound a bit
@Keybored2 жыл бұрын
Thank you for the suggestion! I ended up upgrading the plate to a hype keyboard FR4 plate and it did help with the flex as well!
@juancarlossuarez16423 жыл бұрын
Can you try make an integrate plate flex? Like the YMDK Wings? I'll aprecciate that so hard.
@Keybored3 жыл бұрын
Haha that would be the ultimate challenge!
@juancarlossuarez16423 жыл бұрын
That is the big boss of keyboard, haha, i wish that you take the challenge, nice video by the way.
2 жыл бұрын
Did you do anything to the stabilizer ? cuz they sound amazing.
@panchovelasco56573 жыл бұрын
Hi! Nice video! Not the usual mods seen on other videos... btw, What stabs did you use in the brass plate? If durock v2, how did you make it fit?
@Keybored3 жыл бұрын
Hi Pancho! Thanks! I used durock v2s for the black aluminum version! I used a precision file to enlarge the plate
@user-qn1zj5bs5p2 жыл бұрын
honestly dont know why lots of you want the flex that much , if your board flex , it feel cheap , if your board pingy and hollow , it feel cheap as well , so what's the point going for the flex ? stiff typing like Tofu is still the most famous board.
@tr_yxl23622 жыл бұрын
That is clean af
@Keybored2 жыл бұрын
Thank you so much!
@omgitzj0n03 жыл бұрын
Love the sound profile of the black variation! Suggestion to remove the background music during the sound test so we can appreciate it fully!
@Keybored3 жыл бұрын
Sorry! It was a late night edit and I missed a few things :(
@utterkid23 жыл бұрын
Another way of helping it flex is having o rings on the case screws
@Keybored3 жыл бұрын
Interesting! I guess that is another way without using the 1mm sheets I did!
@junkuqi79483 жыл бұрын
@@Keybored actually i tried to fit orings to the case screws but they just would not go in at all. What I ended up doing is glueing some o-rings on the bottom case where was suppose to meet the upper case. there is still some space beside the o-ring, so I put a 6mm thick poron there to support the pcb for some extra flex (like what you did, I removed the middle foam and also those 4 tiny ones of the side). combiend with pc plate, they actually end up pretty flexible. I'm definitely trying out taking off all the screws between pcb and the plate since the pc plate is causing the pcb to bend a lot. Nice video and wonderful ideas!
@diesel40773 жыл бұрын
That PE mod is almost too easy to be true! Thanks for sharing this bro
@Keybored3 жыл бұрын
Of course! It really is mind boggling good
@kalakalaiand33433 жыл бұрын
thank you for the detailed guide video.. but just had one question. can you do these gasket mod and pe foam mod at the same time??
@Keybored3 жыл бұрын
Unfortunately no... Since the flex one cuts off all the tabs, it doesn't apply enough pressure to keep everything together and the hot swap sockets don't work :(
@tamegaming17683 жыл бұрын
holy crap that's the best sounding gmmk pro i've ever heard
@Keybored3 жыл бұрын
Thank you very much! And so easy to do also!
@tamegaming17683 жыл бұрын
@@Keybored The foam you used, was it single ply or both layers of the bag?
@benjihuh9273 жыл бұрын
those GMMK pro mods sound so good! I just bought a GMMK in silver and plan on doing your sound mod with some black inks, polycarb plate and modded "GOAT" stabs. I was wondering if there were some alternatives to buying a silicone sheet to have the even and consistent results for spacing the keyboard case. Ideally something that could be found in a home would be wonderful.
@Keybored3 жыл бұрын
I think you can also use o rings!
@j3g2 жыл бұрын
@@Keybored i can attest to that. lol. just actually modded by gmmk pro 15 mins ago. cut up some o-rings i got for free from a purchase tecsee carrots off of amazon a few months ago. 3mm diameter and 1mm thickness. superglued them to the underside of the top frame. also had to file the part of the plate where the stabs go through to use durock v2 stabs.
@rezzvisuals73053 жыл бұрын
Your vids are so high quality bro
@Keybored3 жыл бұрын
Thanks Rezz!
@WinkleKeebs2 жыл бұрын
Bought one Lite case and purchasing some awesome isolated flux cut PCB to put into it
@TheChillBison Жыл бұрын
I know this is an old video, but I'd be interested to see how it sounds with the silicone replacing the bottom case foam instead of that thin white sheet.