e_OP Error on Huebsch & Speed Queen Commercial Dryers - HK Laundry

[@martinmullican]

Karl - well done, informative, thank you. Clear, concise, helpful. Excellent, videography, too.

[@ReiMonCoH]

In 20 years as a Alliance equipment tech, I’ve only found maybe 2-3 actual bad m414704 thermistors. It’s almost Always an unplugged thermistor or a broken/rotted wire or connector. If a thermistor Actually goes bad, it’s typically an SH (shorted) alarm display, not an OP.

[@khinrichs01]

I agree with you and your experience. I created this video after Alliance was having vender issues with the thermistor. The original thermistors that looked like twisted wires dipped in plastic were very problematic and unreliable. Still a good video on what types of errors can occur with thermistors. Thanks for the comment.

[@browneyerowland8653]

this hint was very helpful did work and was very happy to see the result do thank you both Utube and mr. Hinrich

[@adedayoezekiel2688]

How can i get that temperature sensor to purchese in nigeria. (I need this temperature sensor for my machine in nigeria, how can i get for purchase) thank you.

[@RodrigoEduardoPiresdeCamargo]

On my speed queen it appears E dS. Then FL and then S 6. What could it be?

[@RD-wy5dj]

Hello Karl, I have a question maybe you can help I would greatly appreciate it. I'm trying to figure out what's wrong with a Commercial Speed Queen dryer it only turns when in cool mode but won't turn when set to heat, what could be the reason?

[@noorazmanmazelan5818]

sir, my dryer have a problem. what mean ECO due of order. I look at manual but I dont understand it. I try to ask few friends but they also dont know what it mean

[@VentasdeGarageNewYork]

Tengo un error de código en mi lavadora Huebsch que dice Ed01 que quiere decir esté error? Gracias

[@davidcabral109]

Hi, how I can lower the temperature in the dryer?

[@manjulakathiresan9531]

How can run with out cansubtion switch

[@mddawood6677]

Hi, Sir I need help. UNIMAC UWU065 on starting time is showing an error E FBAL is out of order.

[@khinrichs01]

I do not know anything about UniMac. Sounds like an out of balance error. Was this a fatal error that required powering down the washer or not?

[@erickadrayton]

Hi, Karl. My employee said the dryer was running and she heard "an explosion" which caught her attention and made her look at the dryer. The dryer stopped spinning and E OP appeared on the digital display. I'm wondering, does that sound right? "An explosion"? Reviewed the surveillance cameras to look for any "explosion" type of activity, bright lights, a flash of some kind. None. All I could see was my employee and two customers look at the dryer at the same time when the "explosion" happened. If you could provide any feedback about my concern of "an explosion" that would be great. Any experience you might have...? Thank you again for sharing. Ericka

[@jhsuper8frontdesk175]

Helped us big-time, thanks.

[@jorgeervimartinezcpos3141]

Q significa af en el panel de error de una secadora unimac

[@qamabasri5101]

hello..What if Ed 11?

[@kerrybarfield6242]

I have a commercial speed queen washer and it is not working. I have clothes and filled with water with the door in lock position. When it is on the edl light flashes. I have powered down the washer and nothing happens. What is the solution.

[@khinrichs01]

kerry barfield 1st you need to unlock the door. www.hklaundry.com/resources/video-library/how-to-huebsch-washer-videos/how-to-unlock-a-huebsch-washerextractor-door/

[@jameskevin753]

Very helpful .thanks

[@ronielimpang3307]

how about rot error hot to fix

[@khinrichs01]

I don’t know for sure but an rot error sounds like a rotation error. Does the dryer drum turn? Possible broken belt??

[@danielayala7144]

What does EHTC mean?

[@khinrichs01]

I believe this is a heat error.

[@danielayala7144]

@@khinrichs01 I have a picture of it and it says "EHT" not EHTC... How do you fix that?

[@khinrichs01]

I am just a distributor who has created some videos to try to help the community to problems that I have encountered. Pleas

[@khinrichs01]

Please contact the manufacturer about your specific error code. Please feel free to technical service at 920-748-3121.

[@kungengkhoon4424]

Thanks mr koral.u r the best

[@tinujose3466]

Very helpful thanks

[@joshnewsome300]

Thx sir great job.

[@gilmarzuniga2760]

Karl hi, i have one error say DU

[@MrOlnev]

Good informative video. Thanx

[@Ahsankhan-ex3ku]

thanks

[@big-joe-momma]

Thanks, great video

[@blahyourmamafoo]

Was at a laundromat, dryer showed this error 7 mins before finishing my clothes lol

[@tonykhanh9578]

Thank you.

[@parrish2350]

Thank u

[@josellecona8043]

Ok thanks

[@josellecona8043]

Good I'm Mexican guy and have little experience I dont have school buy I'm fix some drayer and washer I like this job

[@gilmarzuniga2760]

lfne5bsp113tw01 this is model

[@russellmontgomery4311]

My Huebsch dryer get real hot