Kicker Subwoofer Repair - Part 1

[@timothyhergert4199]

Can i send mine to you to fix?

[@Der1ck]

Great Video tutorial. Can you please add a link to where you get the voice coil for this shallow mount kicker subwoofer speaker. My subwoofer coil is also burnt. I can try the diy approach or just replace it.

[@Moegneto]

Check out lord of bass for replacement parts.

[@PapaLuis85]

How much do you charge to fix a l7s 2 ohm 10 inch tinsel lead?

[@Kevin-tn1hp]

Hey man, great video. I was wondering if you have any video how to replace the surround ? I have a pair of Kicker XPL 12s and the foam surrounds are wasted. I figure it's a hard job since they are stitched into the cone. But I was going to DIY if I could get help and/or replacement surrounds in the first place. Thank you

[@jessledesma9009]

Well I can really see that you're very specific and I sure that it will help someone with reconning subs thanks

[@Moegneto]

Thank you for watching.

[@blackfrost273industries4]

​@@MoegnetoQuestion for you. For clarity, so passive radiators would need to be more (tuned for the port rather than xmax of driver) in a bigger box thereby stating the formula for radiator use to match xmax will get you in the ballpark instead of matched with the port calculations? I can describe differently if it helps or maybe make a video to expand on this a little bit more concisely?

[@stevesmith6528]

My first kicker i cooked it my second on i looked after it better i haven’t cooked it but one of those little wires broke instead is there any better brand out there to buy that will actually last ??

[@Moegneto]

Kicker is a great brand. If it’s new, it will be covered by warranty.

[@stevesmith6528]

@@Moegnetoyeah this is my second kicker same subs how long is the warranty? Think it’s about a year old

[@Eric-ns8wu]

I have the same model 12 inch sub and I believe one of the negative terminals has a bad connection. Its a 2ohm dual voice coil sub and the resistance measured from one coil's negative and positive is all over the place when using the terminals. When I measure from the positive terminal and the first negative tinsel loop on the spider I get a perfect 2ohm measurement. Any suggestions on the steps I should take to make a repair that doesn't involve complete disassembly? Thanks for any help. Kicker Comp RT12 48CWRT122

[@ivandion2011]

I haveva q class L7 10 that needs a new VC. Do you do repairs for the public?

[@Moegneto]

Email me for a quote.

[@ivandion2011]

@@Moegneto what's your email

[@russellcrabtree5314]

Do you know where to find a new cone and spider for a 15" CVX D4?

[@Moegneto]

Your best bet will be to look for a used/damaged one off eBay/offerup/market place. Also reach out to robot underground to see if they have it.

[@russellcrabtree5314]

How did you remove the cone from the coil? What chemical did you use to remove the old glue?

[@Moegneto]

If you are referring to the dust cap, I briefly heated the edge with a hot air gun and slipped my accessory tools (plastic pry bar) under the edge.

[@russellcrabtree5314]

@@Moegneto I was wondering how you removed the coil from the cone and spider pack without damaging them. To replace only the coil and/or spiders.

[@russellcrabtree5314]

@@Moegneto I see that the CVX has a 2 part cone. One part is glued to the other underneath. Would I need to separate them to replace the coil?

[@antonioboyd4225]

Is it possible for me to get you to repair mine?

[@Moegneto]

Email me at [e-mail]

[@Atkins-y8s]

hello do you happen to know if the 10" comp R would be the same replacement parts as the RT? I have a comp R and it needs same replacement as u did to this one. thank you

[@Moegneto]

I would imagine the R uses a different voicecoil height as it has a deeper motor opening. I recommend taking it apart and getting all measurements.

[@adampulliam2845]

Where can I get a rebuilt kit for that speaker kicker comp rt10

[@Moegneto]

Reach out to Patrick at Robot Underground or Jorge at Lord of bass.

[@lawrenceburt1974]

Can I repair my cvr122 similarly?

[@Moegneto]

Absolutely!

[@nickramirez4499]

Hey man the video is really helpful but I couldn’t find the coil, is there a way you can send the link to find the coil???

[@nickramirez4499]

Also I’m working on a 12” kicker so would it be the same coil or is it different?

[@Moegneto]

US $13.96 9％ Off | 1PC Speaker Subwoofer Voice Coil 49.5/51/51.5mm 4 ohm 4 Layers Wire Car Bass Repair Part With Copper Wire Black Aluminum Former a.aliexpress.com/_mLU5lK4 WX495

[@Moegneto]

I would think the 12 does have a different coil because it handles more power. Take it and measure to be sure.

[@tazn9nexp274]

@@nickramirez4499what was the size of the voice coil for the 12 inch sub?

[@jasonmiller9027]

Where u get the voice coil from?

[@Moegneto]

You are able to purchase these voice coils from lord of bass or Patrick at Robot Underground.

[@jasonmiller9027]

What size coil did you use? I have an L7T it looks the same

[@AngelMndz-vu8yc]

What size spider and voice coil did you use? I have this exact woofer that I damaged about 3 woofers ago but I had kept it because I really loved the sound quality and eventually wanted to try and fix and never found anything online about this perticular sub until I stumbled upon this and now I just need to attempt

[@Moegneto]

Hello Angel. For the spider, I ended up using the 8 inch outer, 3 inch inner diameter semi cupped progressive roll spider from lord of bass. I believe cost is $10-12 each (XHDZ068-2 is part number). For the coil, I purchased a 4 layer 49.5mm copper voice coil on an aluminum former from Aliexpress. The part number for coil Item# 8162904946459316. I hope this helps you and thanks for watching.

[@mikhalsimpson5337]

Where can i find those voice coils

[@mikhalsimpson5337]

Having i hard time trying to locate them

[@ontehmoon9846]

This one never worked for me, either instantly blew it or I got a lemon from a shop. I'd like to repair it too.

[@Moegneto]

Sorry to hear that

[@QualityAudio-o4p]

Where you got the voice coil??

[@Moegneto]

Check out lord of bass or eBay