The best crappie fishing setup? Must have rod, reel, line and bait! Fall Crappie Fishing 2022!

#crappiefishing #tips #crappie
In this video, I break down my exact crappie fishing setup that I use year round!
I hope you all enjoy this and find this video helpful!
Check out BnM poles here
www.bnmpoles.com/
Follow me on social media
/ kidkrappie
www.instagram....
business email
[e-mail]

[@raymondjohnson6496]

I really don’t care what anyone says but spinning rods and reels is the best way fish with I have a B-n-M rod 10ft I got it from Walmart

[@KidKrappie]

I couldn't agree more! Thanks for the support!

[@railroadguy438]

Another great day fishing. You know how to catch them. Great video. 👍🤠🇺🇸🎣

[@slabbusterrtr7690]

we differ on the briad/ mono I hate mono😂 only rod that I have mono on is casting rod for spring fishing casting a cork I use to lose so many jigs with mono averaged 10 a day I changed over years ago to braid. Love it .... fall bite is on 🎣 good vid kid I like it👍

[@Digglerdirk79-l4y]

Exactly! Abrasion resistance is second to none compared to mono.

[@bluelagoontipplerloft6130]

Thank for sharing I need all the help I can get I will be getting your setup wish me luck

[@KidKrappie]

Thanks for watching! Hope you catch a limit!

[@lilrobin7555]

whats the setup? i want to get the same exact thinh

[@fishinngrinnin9937]

I'm with you on the braided line, absolutely hate it. Braid is a tangled mess waiting to happen. 🎣 🕸

[@KidKrappie]

No doubt!

[@Digglerdirk79-l4y]

Not all braids are created equal. Suffix never had a wind knot.yozuri super braid wind knots on a calm day.

[@Rockers1121]

Idk I don't see the need for braid while fishing on ultra light rods .. I mean do 1000 series and 2000 series reels even work well with braid ? ... I use braid for 3000 series and up .. but that's a totally different application and totally different fish. ... I love braid... but not for most pan fish ... idk to each thier own I guess.

[@kenneth9874]

​@@Rockers1121my 1000 series reels love braid, braid to floro for the win!

[@Robert-hr6sh]

Well also, if using ultralight or a light rod if using a stiff rod you can rip out the hook when you have a strike and set the hook to hard and with panfish, specialty crappie. A fast action limber tip will not do this and you can feel the light strikes. My personal best always for pan fishing a 6 to 8 foot spinning ultralight fast action and using 4lb mono, or even 3lb mono I've found of Amazon and a good quality ultralight reel rated under 6lb line. Good video and to all, tight lines 👍

[@bradmcclendon4597]

Nice vid Kid! Thanks for the tips!

[@donwhigham2244]

I like your setup, and I don’t use braided line for crappie myself.

[@rwatts1350]

I like that setup also. I've also learned to not underestimate finessing bigger fish that may bite on that 6lb mono. You can still bring in some good ones!

[@keithwalker5078]

I have a bunch of different rods, mostly medium to UL and my go to rod now is the SH SS BNM 7 foot. Light reel of whatever make and hi vis mr crappie 4 lb line.

[@bouncerslabrealnature9143]

My friends and family catch thousands of crappies and perch using under $20.00 rod and reel combos from Walmart. Trout magnet/crappie magnet jigs either tipped with a gulp 1" watermelon pearl minnows, real minnows, or chartreuse bodied trout magnet plastics. Nothing fancy and we do better than 99% of the people around us....proven fact. 💪😎

[@kevinhenderson6485]

I’ve been getting more into crappie fishing last few yrs. Still a bass fisherman at heart but I do love to eat crappie so I’ve fished for them more the last few yrs. And I’m with you man I hate braid. I am a monofilament guy on all my rods love your channel keep up the good videos

[@Arrigo_Outdoor_Adventures]

Mono!

[@Captain_Clark_CDoryAdventures]

I love me some braid. Mono works well for a leader. To each their own. Have a good one. 👍

[@joejohnson4592]

BnM is King. I'm not a big ACC fan; too stiff. I hate braid too.

[@Gokywildcats11]

What b@m do you use

[@donniedickerson8077]

I been Fishin B&M for a long time, Years ago I Had "Slaters" , I fish in Alot Of heavy Cover, so it's best to have as much control of the situation when I hook up with One as possible I hooked about a half dozen times this afternoon that I ended up losing it because of the snags they're in , Using Mono is just a catastrophe ,I switched to the 10.lb Power Pro Braid ,if in heavy Cover I tie straight to the jig ,if by chance I'm not in heavy Cover I will sometimes tie a line to line mono Leader ,but it's not often here I lose to much Tackle using mono , I like a little bit of backbone and a sensitive tip for that reason as well gotta get em Out Of the limbs ASAP , I didn't catch a big bunch this afternoon But What I Did Catch was some Home Run Slaboo Slammers ,I Got a dang good dinner coming Up this week one evening , The bite I Think got a little better After that Tiny shower of Rain ,we supposed to Get some more today according to the weather Man , I hope he's right , Looks like you got dinner in the Box Too , it just don't get any better, Preciate Ya 💦🐟🎣🤠🇺🇸

[@daviddura1172]

nicely done... braid has it's place, crappie fishin might be overkill....

[@KidKrappie]

Yeah most of my friends love it and do well. I just don’t like it lol

[@michaelupchurch3769]

I just bought me a b&m Russ Bailey 8 ft 2-piece crappie rod

[@rickangel7288]

What is what kind of line I use

[@timothythomas3820]

Good morning ! Which size jig head you used on your 7 foot 2-pc b n m Sam heaton super sensitive spinning rod for casting only. And what size crappie lures and the name you recommend me to buy for casting for catching crappie and bluegill please. Please respond back to this comment and answer all my questions please kid crappie. Thank you so much ?🙏🙏

[@KidKrappie]

Any of the main brands are good. I like to have baits that range from 1 inch to 2.5 inch

[@KidKrappie]

I use 1/16 or 1/8th oz jig heads

[@michaelupchurch3769]

The b&m pole you using right now is that a 8 foot or a 10-ft

[@Deven210]

What size rod are you using? Sorry if I missed that.

[@marksingleton5949]

Nice vid. What's your livescope settings,if you don't mind sharing.

[@timothythomas3820]

Hello ! Kid crappie. I will be casting only with that 7 foot 2-pc sam heaton super sensitive spinning rod for catching crappies and bluegill from the bank and my crappie bait will be a bone head tackle slim stick . Will you go with the 1. 75 “ are the 2 3/8” in that bone head tackle slim stick bait if you pick the 1.75” which size jig head to buy are if you pick the 2 3/8” which size jig head to buy. Please reply a comment back to me please with all my questions answer. May god you and your family and may y’all be safe please 🙏🙏

[@timothythomas3820]

Hello ! Kid crappie. What the name of that crappie magnet bait that you are used in this KZbin video please. Merry Christmas kid crappie family. 🙏🙏

[@KidKrappie]

It’s like a monkey milk and chart. I don’t remember if it had a certain name or not. Merry Christmas to you and yours as well :)

[@KevinHorton-v1n]

Hey kid, what lakes do you mainly fish?

[@KidKrappie]

I fish all over but mainly fish Ray roberts, Lewisville, grapevine and Joe pool

[@sebastianwilliams1902]

What reel are u running thanks in advance

[@lesterhenderson1203]

Where did you get that fish finder Bracket

[@quincywalker4592]

Are you fishing shanango in western PA?

[@KidKrappie]

No, I am in Dallas texas

[@Thegioitunhien2512]

Hope you succeed soon

[@KidKrappie]

Thank you!

[@Gokywildcats11]

Whats a good reel

[@brucejarrell5707]

Do u ever fish lake Whitney?

[@keithwalker5078]

don't use split shots or braid which I can't stand as the tangles are killer. My SHSS is also great for jiggling jigs off of brush so I don't lose as many as most. when really stuck I grab line directly and pull do NOT use the pole.

[@timothythomas3820]

Hello ! What was the name of that crappie magnets color that you was using in this KZbin video and the name of them two spinning rod you was also using in the KZbin video please. Please reply back a comment with answers kid crappie. Do you think the B n m rods better than the ACC crappie STIX rods and the Lews Wally Marshall crappie rods . Kid crappie if you had to pick one rod will you get the b n m sam heaton are the Russ Bailey rod for casting from the bank for crappies. I’m sitting here waiting on a reply comment answer back from you kid crappie 🙏

[@KidKrappie]

I don’t remember the name of the color. I was using a BnM pro 100 series reel and a shimano Sahara. I know I prefer BnM in general. I Always have loved BnM rods and the action on them. If I had to pick one rod, it would be a sams super sensitive 7 ft. It’s a great all around rod. Thanks for the support!

[@brentgrusendorf7259]

What lake are you fishing?

[@davidhoward8951]

What size reel do you use

[@KidKrappie]

1000 sized

[@davidhoward8951]

@@KidKrappie I was thinking about a 7.6 casting rod ACC crappie Stix

[@Steve_Balboni]

What length rods were you using?

[@KidKrappie]

8 ft

[@Steve_Balboni]

@@KidKrappie I ordered some 9 footers. I'm wanting to use those instead of my 7 footers for everything now. Worried they may be too long, but we will see I guess.

[@KidKrappie]

@@Steve_Balboni I use 9 fters all the time and they are long but not overly long if that makes sense. 10 ft is about the longest I like. Gets harder to handle them longer than 10 ft

[@Steve_Balboni]

@@KidKrappie yea that makes since. Thanks so much for the feedback!

[@timothythomas3820]

Hello ! Kid crappie. I’m going to buy me a 7 foot sam heaton super sensitive spinning rod. I need to know what are the line wt. and the lures wt. on that 7 foot 2-pc sam heaton super sensitive spinning rod please. What size jig heads you used and what size fishing line and what size crappie lures you used on your please. Kid crappie please reply a comment back to me as soon as possible please with answers please. Thank you so much kid crappie. Keep them big slabs coming on your KZbin page. God bless you and your family and your KZbin page be safe out there on the water please.

[@KidKrappie]

Hey Tim! You will love that rod! I use 4-6 lb me crappie high vis mono and usually use a 1/16-1/8 oz jig with jigs that are 1-2.5 inches long

[@timothythomas3820]

Hello ! Kid Crappie. What the name and size of your slip floats you used on your b n m Sam heaton super sensitive 7 foot spinning rod for casting the Bobby garland 2” baby shad and them 1. 5 “ Crappie magnets you used. What size jig heads you used for casting out there for catching slab crappies . Please reply a respond comment back to me please with all my questions answer please. Thank you so much and may god be in your heart to answer all questions please. May god bless you and your wife and kids . I wish you and your wife and kids a merry Christmas and a happy new year. Kid Crappie keep them KZbin crappie videos coming in 2023 please.🙏🙏

[@pescandoconroger3562]

Nice 👍 first comment 🎃

[@KidKrappie]

Thanks buddy!

[@timothythomas3820]

Good afternoon ! Kid crappie. What’s up. Which spinning rod would you put your last dollar on 1. B n m company. 2. ACC crappie stix company. 3 jenko fishing company. 4. St. Croix rod company. Just pick two rods Company that you would recommend me to buy from that you would buy from kid crappie. I will be doing nothing but casting for crappie and bluegill from the bank that all. I’m praying to the lord that he touch your heart kid crappie to send me a reply comment back to me as soon as possible with all my questions I’m asking you for answers please. May the lord bless you and your family 🙏🙏

[@KidKrappie]

I love my BnM’s. I was buying them long before I started working with them. They fit my style perfectly!

[@michaelupchurch3769]

They are medium light

[@alberthighsaw5622]

Catch a load

[@KidKrappie]

Thank you sir!

[@scotwcates]

i noticed you have your rear view turned on your l/s and a lot of people do this does it make a difference on the image

[@theroidragedtrex7908]

How bout all that rain ol son?

[@KidKrappie]

I loved it but we need a bunch more

[@theroidragedtrex7908]

@@KidKrappie wife said something about more this weekend apparently

[@michaelupchurch3769]

The same one you have in your hand

[@timothythomas3820]

Today is march 22, 2023. Hello ! Kid krappie. What the size of that b n m Russ Bailey spinning rod that you are used in this KZbin video please. May the lord bless you and your wife and your kids and your KZbin page in 2023🙏🙏 I’m thinking about buy me a b n m Russ Bailey spinning rod what size you would recommend me to buy please I want you to pick me a size to get kid krappie please 🤙 what size jig heads you would recommend me to buy to cast for crappies and bluegills from the bank. Please reply back a comment back to me with all questions answer kid krappie 🙏

[@egraham54]

Why don’t tell us what lake you are on?

[@KidKrappie]

I don’t like to send traffic to small lakes

[@timothythomas3820]

Hello ! Kid crappie. I didn’t know that you work for b n m poles rod company are you on there pro staff . They’re a good company to work for and mr. Jack wells is a great boss to work for and he is a godly praying man. And I love everything about b’n’m poles rod company. They are my favorite and number one crappie rod company in the world. I like b n m poles company because they do right about they customers and there working. Kid crappie you have a good job at b n m poles company. Keep them crappies KZbin video’s coming using them b n m 7 foot 2- pc Sam heaton spinning rod and them b n m Russ Bailey 8 foot 2- pc spinning rod please. May the lord bless you and your wife and your newborn baby kid crappie. Please reply a comment back to me on how you feel about my comment to you kid crappie 🙏🙏

[@vincentrussell7246]

Do you eat fish, can't tell I like when y'all do catch clean and cook's that's what's happening everybody catches them but only the real fisherman eat their catch show viewers how you clean and cook them up with some tasty recipes

[@KidKrappie]

These were for my in laws. I don’t think they want me filming them while they cook and eat them. Guess I’m not a real fisherman 🤣

[@rammone5241]

You are too skilled to not make you own lures. The only mold you need is the "Do it 2.25 fry" get silver, black, chart, white, green, glitter size.15 and .40 get the injection set, soft plastisol, a small microwave. It takes less than 10 minutes out of you day to pump out a few baits for an outing. Stick to the basic colors, you can go crazy making baits you will never use. I rarely use colorant, just before the mold is ready to inject add the glitter, than inject, just don't add too much glit, before each injection you should add more glit, when your bait has that natural scale look, it just takes practice. You will never ever have to buy lures again! I can repeat one more time, get the "2.25 Fry" mold that is all you need. Do it allows you to earn points that will benefit you later, I actually redeem them to get more molds which I barely use LOL. The fish are biting in the creeks more like October bite than late November, just one of those years. If you cannot make the creek, just hit the lake early morning at your pre spawn spots best bite is early.

[@Gokywildcats11]

Do you make your own baits.?

[@Nazman06]

funner