Kimber K6s 357 Magnum Target Revolver Review

[@taxburdett]

My wife has the 3” DASA version of this and loves it. She has hinted that she wouldn’t mind having this one too. I really wish Kimber would make a quality .44 magnum like this. I’d buy it immediately.

[@The78CJ5]

I would buy this revolver before buying the new model Colt Python.

[@rockyrutherford7362]

You're absolutely right, now days you are just paying for a name, nothing against the Colt python I've owned 1 before

[@TrollMeister-s6n]

The new Colts suffer from light primer strikes in double action. Ask me how I know...

[@DickSteel-b9o]

I have noticed Colt usually has lower ballistics and I have also noticed that there is usually a very large cylinder gap

[@JRCninety]

Me too. Any day!!

[@randyk2232]

I’ve had the K6s Target for about 6 months now and it’s absolutely outstanding in all categories. Worth the $$$ Thank you for that review Sootch.

[@randyk2232]

@@sqwk2559 Negative, I just enjoyed that review.

[@JM-sm4ry]

where can i find that holster

[@randyk2232]

The holster I’m using is a 1791 owb

[@3155DOGMAN]

Galco also makes a nice holster for it.@@randyk2232

[@Yoko.Kurama]

Are the rear sights adjustable for windage and elevation?

[@josephesquivel4066]

When I was a kid I used to play this game called Perfect Dark, basically a futuristic James Bond, and this looks like the revolver in that game.

[@waynecastleman1363]

I just love this revolver, it's one of the smoothest guns I've owned, definitely a keeper.

[@redesert_boy8202]

Thanks Sootch00, appreciate someone reviewing and bringing attention to another quality 4 inch revolver to give additional options if you want to spend the money. Very nice lines as well.

[@ggreloaded5269]

I have the 3” DASA model with hogue rubber grips and red fiber optic sights. This gun blows my mind, it is amazing. Probably my favorite handgun along side my s&w 1911sc e-series.

[@LexingtonDaniel]

This model has been my EDC for about a year now. Love it for carry and at the range.

[@ZETH-f1x]

Just purchased one myself, do you recommend a certain holster for EDC?

[@LexingtonDaniel]

@@ZETH-f1x I'm using the Galco that's available on the Kimber site.

[@LostintheHate]

Just purchased one for a grand

[@herewardthewatchful1014]

Perfect barrel length for getting good velocity out of a .357 magnum cartridge. Been wanting a four inch for a while now.

[@mikeseier4449]

How long have you been wanting a four incher?

[@karl9400]

Your reviews are the best for a hundred reasons that I’ll spare everyone on. Considering being a patron supporter just to show appreciation. Thanks.

[@Larry-gs8gb]

I love wheelguns!

[@shockwave6416]

Me too buddy! Can't get enough of them! Got the revolver bug!🪲

[@chuckoaks6756]

I'd love to see a beautifully blued revolver come out. Like the old time smiths were.

[@exothermal.sprocket]

Would have to be a blackening process for stainless steel. Otherwise Kimber would have to make everything out of carbon steel, which is a different process than stainless.

[@p47rr]

Not me. Bluing wears off. Can’t clean it with out that happening.

[@ragnarragnarsson3128]

They could do black chrome or dlc

[@twcnz3570]

True that, but the stainless looks pretty sharp.

[@lauragriffin509]

Cerokote

[@edmundleblanc9508]

This beautiful gun, had to go with rubber grips. Was painful to shoot 357 magnum. Hogue rubber grips made a big difference, essentially no pain and more accurate shooting in double action. Very good CCW, and can get loads with about 700 ft lbs of energy.

[@oldhead_]

Shot the 3 inch dasa at my local range and Wow! It was so smooth and accurate. Best I Ever shot at 10 yards..the double action was so good, think I’m gonna grab the hammer less version and train up..also picking up Lok grips for it..great review as always..

[@jasonwolfe9892]

I want to get this in a 3 inch barrel along with a Smith and Wesson 686 plus in the 5 inch barrel.

[@angelotero7729]

best gun reviewer on KZbin really shows off the gun not just on the range but that close up of just the gun shows it's real beauty definitely picking this up thanks for reviewing this

[@jasonkeating9958]

Love these k6 revolvers but I think the long barrel versions need a few contour lines running the length of the barrel so it doesn't look so blocky It's still a looker thought

[@americansuper-soldierjadav7234]

eh, but if you got a guy who does custom engraving, its an empty canvas!

[@benjamin3290]

I actually love the utilitarian look of it. Makes it unique and easily recognizable

[@l.peytonadams8570]

The term "work of art" comes to mind.

[@Brad-ic4bp]

I went with the K6S DASA (exposed hammer), because I already had a Colt King Cobra Target model. I also got a set of Kimber full size target grip for my K6S, which looks a little disproportionate - but it makes it way more comfortable to shoot (especially with 357).

[@BLACKRIFLEREVIEWS]

That Kimber .357 looks Heavy Duty like the S&W " N " frame.I bet some 180 grain magnums would be nice for hunting.I like the target sights on it.

[@wehrewulf]

N Frame? Are you drunk? This is more akin to a J-frame. Three frame sizes smaller than an N-frame.

[@BFisherMKE]

That factory double action pull is insane.

[@80sDon]

I have the 3" K6s DS/SA and the the Colt King Cobra. No way the K6s has a better trigger.

[@KevinSmithdc]

@@80sDon The K6s's trigger is so fine, if you threw it up in the air, it would turn into sunshine.

[@80sDon]

@@KevinSmithdc It's feels like a S&W Jframe with a spring change. Nothing special. It's a typical coil mainspring setup. Pull the trigger, you hit a hitch after the cylinder is rotated and before the hammer drops, and then you pull past the hitch and the hammer drops. The new Colt King Cobra and Python have a leaf mainspring. The trigger is smooth and consistent. There is no hitch feels lighter than the K6s. Both the Colts and the Ruger LCR have a better trigger than Kimber revolvers.

[@shockwave6416]

@@KevinSmithdc dang boy daaaaaang! 🌞lol!

[@TrollMeister-s6n]

@@80sDon Enjoy your light primer strikes in double action with the linear leaf spring! I'll take the coiled mainspring any day, at least I won't have to wonder if it's gonna go bang when I pull the trigger!

[@BG-qo8ol]

Chiappa cyinder Taurus barrel, Ruger button, Smith sights, Colt guts. whats not to like? Except the price

[@DeadRoman]

The only kimber I DO WANT!!

[@staceyroberts9177]

I have the 3” with hammer and I absolutely love it. Shot a deer with it last fall. Can’t say enough good things about it. Smooth trigger and full magnum loads are manageable. Work of art.

[@bbqguy777]

I love the intro! I thought you said “the Kimber K kicks ass...” made me chuckle

[@Mrgunsngear]

Thanks

[@orthogonal1]

I wish there had been a visual between the Kimber and a common S&W K frame.

[@TheRealJoePas]

Wish i could find a Kimber K6s DC or TLE in stock anywhere. They have been sold out for almost a year now.

[@selaxlife7621]

Ammos bros in bellflower California...they have a sh!toad of them.

[@Rowrin]

Man... the full length underlug and dehorned profile / smooth contours really give this revolver a handsome profile. It really is a beautiful piece of engineering.

[@WixRanch]

I have K6s DAO and DA/SA 3" revolvers. I put a reduced load spring group in both which made handling DA sight maintenance a dream. Super inexpensive update for those with moderate gunsmithing skills. Do it!

[@Eddy-gc2vx]

What is the small hole on the barrel? Is there a pin securing the cylinder.? What does it do.

[@khamzatchimaev1009]

Morning mr. Sootch00 be safe

[@sootch00]

Thanks Xavier!

[@5LsForever]

Just picked mine up today. Can’t wait to go to the range.

[@jekiadams2563]

Tnx Sootch, one of the best gun chanel in my opinion!

[@sootch00]

Thanks Jeki! That's an honor

[@thunderstruck5484]

Beautiful and that’s a lifetime gun that you will pass down in the family thanks for sharing your review

[@sootch00]

Thanks for stopping by!

[@3wheelmannc860]

Very nice offering. Thanks for sharing.

[@sootch00]

Thanks Brother!

[@p47rr]

Best revolver made in America right now. Second only to the Nighthawk.

[@vicentesanchez7168]

those are beautiful Revolvers and those speed loaders are just excellent and Fantastic... the price definetly reflects the Quality.... definetly a great Choice

[@jaredlostetter265]

I was just looking into this gun the other day, now here is the review! Thanks

[@sootch00]

Thanks for watching Jared!

[@krafkakyle4768]

The Kimber K6s Target model is amongst the Best in the World!!! Thank You Kimber

[@99Racker]

For a defense revolver, a 3" barrel would be an advantage and just as easy to carry. I don't know why people think they need a too short barrel. Thanks for the video.

[@zenjitsuman]

I don't need a target revolver for carry

[@benjamin3290]

I have the 3” DAO and it’s an excellent carry gun

[@connor1982]

@@zenjitsuman a 3" is a pretty crappy gun for only range use😂 2" is garbage unless it's for pocket carry

[@olvera6710]

@@connor19823inch ain’t crappy unless you have little girl hands. 3 inch revolver is pretty much a 4 inch semi auto when you take into consideration the chamber.

[@TheRios7018]

Just bought a kimber k6 combat model today! Couldn’t be happier!! Nice review like always sir!

[@3155DOGMAN]

I got that model for Christmas yesterday and will go to the range today.

[@Scarywoody]

Looking forward to the day it says "Made In Troy, Alabama".

[@armadefuego5907]

I have an appreciation for the firearms companies that move from socialist/gun control states. I hope these companies prosper in their new homes.

[@monty_wolfkitty]

Socialism is spreading faster than people can move away from it.

[@stever8776]

YES! Like when MagPul moved everything out of Colorado👍👍

[@MICKYLEAKSMGR-PRESIDENTCJWORLD]

And if it's a Shotgun, before buying it like Bill Burr, get to hear about the "Spread"

[@hasgunwilltravel6840]

They have been assembled in troy for a while. The 1911s moved full assembly to troy last year.

[@goodcitizen3999]

I think this is a great looking and handling pistol, I got to try it out on the range. I would love to see it in 9mm with all the benefits of 9mm like shorter cylinder. Then you do not need to worry about recoil and more juice than 38spl.

[@True-word74]

Next to my colt king cobra and python it’s my favorite revolver .

[@guiT39]

Thats gotta be one of tge best looking guns i've ever seen

[@bryy2053]

It really is a beautiful piece.

[@johnroper3077]

Big Sootch!! When are you gonna' do a PCC pick (PTR-9c maybe?) and Dead Air Silencers aka The Wolfman? I think it's as cool and awsome as you are man!!

[@kfeltenberger]

I never bought into the Kimber hype after seeing several rather poorly finished examples some years back (finish flaking off the slide, detent plunger tube falling off, and horrible triggers...on new in box examples), but I have to say this revolver intrigues me. It shows that Kimber can do something other than copy a 100+ year old design that's been in the public domain for decades.

[@sootch00]

Kimber went through a rough spot a few years back but they've worked hard to get their QC in line. But the K6s Revolvers are top notch. Thanks Kurt!

[@kfeltenberger]

@@sootch00 I hope so. Seeing the finish flake off a $1200 item was an eye opener!

[@chuckoaks6756]

I've owned a kimber 1911 for decades and never seen any finish problems. That being said, that back site would rust for some reason. Ballistol did stop it though.

[@nickriley4609]

My kimber k6s dasa 2in had a bad fitted grip and sloppy side plate with cylinder wobble..sent it back in all they fixed was the grip..sent it to me without addressing the other issues...instead of sending it back in again I fixed it My self with a couple hours of painstakingly hand fitting it to the frame withe diamond hand stones, 1,2, and 3000 grit sandpaper and some dremel polish....looks good but I have to address the cylinder wobble..have heard about some metallic colored jb weld with some more shaping and hand fitting...for the thousand dollars I paid for it plus other expenses I can tell you it's not worth the headache

[@kfeltenberger]

@@nickriley4609 I think I would have had my attorney draft a letter that told them to either fix the gun or they'd face a suit.

[@petespurgeon7217]

Price dictates or should over all quality & resale value , love what they did with cylinder shape to facilitate easier carry. Great review as usual. P.S. Tx.

[@atticninja9194]

I’ve got this exact gun and carry it on the weekends. Fantastic gun, it really is.

[@user-jetmachinist]

Very nice ! Something to dream about owning.

[@gregorystatt5562]

Does the rear sight get in the way of the hammer in single action? Looks weird..

[@olivierlabatut9333]

such a beautiful tool ! thanks for the review.

[@anibalperales1008]

Is the frame size similar to a D Frame Police Positive Special?

[@Colt-ii4qn]

My mouth is watering looking at that thing. Got to have one, the trigger alone is incredible 👍😀

[@aquaman7356]

Great review. When I get a mortgage refinance, I’m getting one. For once in my life, I want the best. The Lady’s want their expensive piece of jewelry, I want a Kimber Revolver 🎉

[@markfletcher5457]

Great looking revolver.

[@perrymiller1098]

How about a K8S with a 4.5" in the style of a S&W model 19? Adjustable night sights. Rear sight styled after S&W adjustable micrometer sight.

[@deaftodd]

I have the same exact gun. Just be careful with some hot bear 200 grain ammo. Those shells can get stuck and need to push each shell with a Philip screwdriver because it may mess up the extractor. The ammo was Grizzly hard cast flat nose. The primer was squished flat. For sure, this is not a bear gun. However, it's very fun gun with standard 158 grain ammo.

[@wehrewulf]

Why would you shoot bear loads in a J-Frame(ish) revolver? That is not the gun's fault, that is your fault.

[@robinr6919]

Who makes a nice OWB holster for this gun? A nice leather holster that can be worn while hiking/hunting.

[@karlchilders4782]

Love your reviews. Did you fire any .357 magnum loads? When I shot mine, it nearly broke my wrist (just joking), Recoil is vicious. Both of my range buds, shot one round and gave back to me. Maybe Hogue rubber grips. You are right, beautiful gun.

[@bobbymalcich63]

thank you sootchoo for the video!!! i like the revolver!! keep it up sootchoo!!

[@lchristian1696]

I just purchased this gun today - pick it up in 10-days.

[@bullpup33]

How did you like it?

[@lchristian1696]

@@bullpup33 I love it! The 357 Magnum rounds make your hand numb with the power. Using 38 special rounds is fun too. Overall, it's a great gun as expected from Kimber. I also got a Covert II recently, and love that as well. But the revolver is my most trusted home defense weapon. Totally recommend.

[@bullpup33]

So I purchased it and took it to the range. Sadly it's going back. It was shaving rounds and caught some shrapnel in my face a couple times. Called Kimber and they gave me an RMA. However, I can attest the .357 was stout, but not awful. Very shootable. Can't wait for Kimber to fix the timing issue and get it back. Nothing out my pocket since the store is shipping it. Fingers crossed 🤞.

[@lchristian1696]

@@bullpup33 sorry to hear that! Glad they are making it right. Run some 38 Special rounds through it, too. Gives your hand a break from the 357 rounds. I have 3 Kimber's and love them (Custom II, Covert II and the 357). The Custom II, I had some issues with, too, and had to get it corrected (safety was messed up and when I used it, the slide would stick so I couldn't rack). The revolver is my go-to for home self defense compared to the semi-autos (.45 Covert II 3" barrel is smooth) because how straight forward it is to use - and the wife prefers it (prefers 38 special rounds). And one round would scare the crap out of anyone dumb enough to try to break into my house. Every-time I am at the range shooting the revolver with 357 rounds, someone is like "bro, what is that thing? A cannon?"

[@purleybaker]

Thanks for the video-really well done and lots of good information. This is next the big purchase on my list.

[@marc122656]

good fair review, I own Ruger Super Blackhawk SS, 7" Barrel .44 cal, GP100 SS, 6", and SP101 SS, 3" .357, 5 rods., my question is do you know if Kimber will have it 6" to 7" and or a .44 Cal? Thanks.

[@pete4633]

I own the 3 in dasa K6s and I also had to put hogue grips on it because the beautiful grip that comes with it is worthless with full house underwood 1700fps nuclear loads

[@TietLung]

With the longer barrel, it looks like it was put on as an after thought. Needs some profiling work to match the rest of the gun.

[@Aurongel]

I held the double action only version of the K6S the other day, it's an amazingly made weapon in almost every way. It's a shame that I can't find any version for this around me for less than $1200~ish. I would never concealed carry a revolver so that would be a lot of money for me to spend on something that's more of a curiosity than a necessity 😔

[@jeeperpete99]

Merry Christmas to me! Have mine now. Very very satisfied.

[@davidgreve1081]

If you magnaported the barrel end, would it help even more when youre trying to group em?

[@jimmorrison714]

I already own 1 modern revolver which collects spiderwebs in my safe. I tried to like revolvers, but it never happened. Maybe because I learned to shoot with 1911s in the military. It seems like revolvers are like buggy whips after ordinary people could afford a model T Ford. No matter how great those buggy whips were, they are relics of bygone age where the people have moved on.

[@channeellll7623]

Would be funny if you had no choice but to use a revolver in an absolutely terrible situation and couldnt operate it well above the average person.

[@Irakproductions]

I have a model 19 pre lock and I was considering selling it to buy the kimber but the more I look at this I think it’s practical but not nearly as pretty.

[@jbwjr54]

Great review. Is it easy to clean the muzzle and residue that accumulates on the barrel?

[@Rowrin]

I really wish they made this in a 6" barrel. I have the 3" and it almost seems redundant to pick up the 4" when the only major benefit would be the sights. A 6" target revolver would make better use of the target style adjustable sights with it's better sight radius, and better velocities achieved by the longer barrel imo.

[@davetoth9767]

Great review thanks so much for all that you do. I always enjoy your reviews

[@Brad-ic4bp]

I'm trying to decide between the target model and the combat model. I'm leaning toward the combat model, which is about $65 more expensive, because that big adjustable rear site looks like it interferes a bit with the hammer spur real estate.

[@wesleycameron1034]

This gun made me fall in love with revolvers and 357mag. Lol

[@ricallen7273]

Nice gun, but what’s up with that rear sight. It’s cranked all the way up

[@roul3688]

Definitely a good looking gun.

[@r.r.5204]

As a Duty-Pistol use, how does it compare to SW Model 66?

[@Narrowurethra]

I was wondering about the firing pin block I appreciate it

[@thejuando]

Nice! I have the original K6S and love it.

[@kenfrievalt7826]

Wow .. I want one just like in the movies... I revolver that never needs reloading

[@carlpaladino427]

I own that GFO model but find the grip to small for me. I have bought the std grip no finger grooves but find it is not any longer. Haven’t found a bigger grip yet.

[@BrassCatcher]

Been waiting for that K6 in 22lr for a while now

[@jonfarrar9666]

Beautiful revolver. After reading comments, I think I'll pass on the recoil. Couldn't decide between the kimber, 686, or gp100. This helped shorten the list.

[@wescraske1252]

That model you have looks like the Combat model. Nice gun!

[@montycasper4300]

Great review. Since you're also a K6S fan, perhaps you could get Kimber to loan you K6S 3" TLE. Not one KZbin review of that model.

[@123mjenings]

I like buy 357 w/4 inch barrel. Cost??

[@thearchitect817]

I own a 3” custom K6 and it’s sat in my vault far too long. This happens when you have hundreds of guns but only hundreds of rounds boycotting the price gouging from ammo manufacturers. The K6 is the second smoothest wheel gun I’ve ever shot in 37 years now. My Colt takes top honors for smoothest and best revolver. People stupidly say the 38 special is anemic and now the 357 magnum is being degraded. I can tell you in a 3” barrel the .357 K6 has a kick and will drop a horse in one shot. Disclaimer (horses are awesome, do NOT shoot any horses) or any living creature unless appropriate. Compare the Colt King Cobra with the K6. I have and it makes for an intriguing video from two top shelf guns.

[@sisleymichael]

Pretty revolvers are easy to love. Oh, another for the wish list, (sighs with sadness added).

[@rjzavala87]

I feel your pain. I have a weakness for .357s and would love to add this beauty to my collection but it just wouldnt be responsible to spend $900 on a pistol for the forseeable future.

[@Dr.Shankenstein]

Mine has sloppy cylinder play in the front does not feature a ball bearing detent or triple cylinder lock up like a Smith & Wesson or Ruger. I was pretty disappointed and fell out of love with the gun

[@amotorcyclerider3230]

Excellent. Thanks. I see the Kimber Target GFO has the finger grooves but what is it without these grooves? I wish to buy one with the grooves but cant find one in stock. While, the Kygunco has a few instock but it has no finger grooves. Any suggestions?

[@furion..]

16:36 - You're killin' me! 😂

[@trumfit]

What holster do you have there? Looking for one for my Target. Thanks!

[@rico989]

I like my ruger sp101 would be a upgrade to an extra round.

[@KellySmith-gt5pi]

Thanks Sootch 00

[@theirishaxe9405]

Have you done a review on the Kimber Micro 9 Rapide ? If not maybe you can?

[@hasgunwilltravel6840]

He has done a review of a micro 9. The rapide is functionally the same gun.