Leopardwood Salt Cellar or Box

[@dalekuhlman1009]

Not only is it good to see you back, but to hear you relaxed and in your element. Blessings to you and your family.

[@ronkiskowoodart9680]

Welcome back! I gave up on my burner bought a cheap laser and now I burn like a pro!

[@ricktalerico893]

Great to see you back! I really enjoy your videos.

[@DavidAdamsen]

So glad to have you back, Kim! 🥳🥳🥳🥳

[@ericschenck9954]

That is AWESOME sister!!! It is great to see that you are back!!

[@carlosmontoya9954]

Hi Kim , nice to see your work again , wish you the best

[@davewilson4957]

Glad to see you back, keep em coming!!

[@KimTippin]

Thanks! Will do!

[@TheWENTWORTH1]

I’m so excited for more turning videos!! 🥰🥰

[@monteharris1099]

Very glad to see you back. Beautiful wood, beautiful turning, beautiful turner. Glad we will be able to see your work again.

[@Ron-Radliff463]

Welcome back. We've missed you.

[@donaldtrabeaux5235]

Absolutely awesome little project and it's a blessing that you are back turning, take care stay safe and healthy God bless.

[@RadioFaceWoodWorks]

Its been a while but the girl has not lost her touch...welcome back...stay safe...press on 😎 Joe

[@knotgreatwoodworks]

Welcome back. It warms my heart to see you turning again and sharing videos. I hope your heart is warmed being back on the lathe and enjoying all those supporting you. Here's to looking forward to more.

[@STMwoodturning]

She's BACK!!!! YAY!! To be honest... I didn't think this day would come especially with all the trials you & your family have gone through the last three years. Thanks for sharing Kim! God bless and happy turning 😁

[@rayworstine4399]

Good evening, Kim. A really cool turning idea. Well done. Good to have you back.

[@ClairesCraftyCorner]

ooooo Kim - these are stunning ! so elegant and timeless too :)

[@norm5785]

Glad you are back, nice Salt Bin. Leapard wood is nice for so many projects. Thank you for sharing. Everyone stay safe, cool, happy and healthy. From Henrico County Virginia

[@hendrikjbboss9973]

Kim, oh am I happy that you are back ❤ It means a lot for a lot of people. Personally I pray that your troubles are over and that you will be BLESSED IN EVERY ASPECT OF YOUR LIFE. From South Africa 🇿🇦

[@jonmartineau1004]

Congrats getting back to the lathe . These minor issues can be over looked the box or Salt Cellar turned out beautiful . Thanks for sharing and May GOD Bless you and yours as well .

[@harveyy4492]

You have been missed. Glad you're getting settled in and back to turning. Showing your process and missteps that you felt you made is so appreciated. Still a beautiful and useful box whatever it get's used for. Looking forward to your upcoming videos.

[@Elyyfz450]

Great to see turning wood 🪵 again. Happy turning

[@lyleturner7593]

I'm so happy to see u back to turning. We have all missed u.

[@williamshaffer2617]

Glad to see you back on the lathe.

[@paulbrown7936]

So glad to see you back in your element. You are a strong women.

[@johnfoster921]

So great to see you back in the shop turning. We've all missed you.

[@davidschramm363]

Welcome back Kim! We’ve really missed you and forward to seeing more great turning videos.

[@cherryshrimp2359]

Glad to see you back. You've been missed. It's great to see back turning.

[@jacquiemouton9053]

So happy you are back Kim. Hope all is going well with your family and that you are settled in nicely. Nice project to start off with. Blessings.

[@scharlottehart264]

I am Sooooo glad you are back. Been a long journey. God is GOOD!!!

[@zetuskid]

Great to see you back on the air! Hadn’t lost a beat!!!! Habakkuk 2:4 (NKJV) “Behold the proud, His soul is not upright in him; But the just shall live by his faith.

[@DougMilleratWoodSpunRound]

So good to have you back on the Tubes. These salt cellars are great. Great idea to turn a small project, or 3, to get back into the swing of it. Take your time. We’re here for you. Shout if you need any help.

[@maddieadams75]

Welcome back to turning. Beautiful salt cellar box. Looking forward to more 🧡🧡

[@dallastaylor6235]

so good to see you turning again. when I dd my salt cellar only used one magnet and steel rod on the other worked just fine and I like a tighter fit n the brass rod just becuase I don't like the flopping. Great piece look forward to all the new projects

[@johnnyho900]

Glad you’re back and are safe and healthy thru all your challenges. As I think back from your videos, all the challenges that you been thru in the past few years. Stay well, looking forward to the next video.

[@JamesSmith-ji6yx]

Kim:It is great to see/hear you again. I hope you and your family are comfortable in your new home.

[@danielmukamal652]

Welcome back, Kim. I am just a fan out here and enjoy your presentation, your craftsmanship and the beauty of your pieces. Thank you again, for sharing your artistry with us.

[@mrbodawg]

Great Video! Very glad you are back and doing well.

[@jamespeterson4465]

So good to have back! God bless!❤

[@ronaldtodd4819]

Glad to see you back! Hope all is well with you and the family and your house issues are now behind you. If you get a chance, come join us on Wednesday nights again, we would love to see you there.

[@s.l.makuka9219]

Welcome back Kim. It’s good to see you back Turning on KZbin! Looking forward to seeing more great videos. Blessings to you, your family, and your new home and shop!

[@JordanWoodwerx]

Welcome back Kim, good to see ya back!! Cool little project.👍🏼👍🏼

[@louislarose6613]

Greetings from Canada ! It is good to see you turning wood again ! Good Job on that box !

[@richdbolduc]

😮😮😮 A new Kim turning video!!! YAY!!

[@DougRowe-jc5ox]

So happy to see you turning again

[@carolriley8472]

So happy to have you back. I want a salt cellar and I love Leopardwood!

[@davidzindman]

I am so happy for you back turning it took a long time may you be blessed in everything that you do and the one that can’t be used For food could be a ring box

[@davidzindman]

I am so happy for you back turning it took a long time may you be blessed in everything that you do

[@chiphardy7569]

Oh happy day!!! You are back!!! You might not realize it, but you've just made this world a little more enjoyable. Thank you and keep those videos coming!!!

[@KimTippin]

🥰🥰🥰

[@ronfinch5532]

Glad your back! Cool project. I turned some teakwood a little bit ago and it was real chippy and kinda dusty almost. That leopard wood had some nice grain pattern to it.

[@steveschulkin8335]

Kim, welcome back. Missed watching your creative juices come through your woodturnings. This piece you did is really beautiful and might even be something I think about for my wife and have you do maybe with some resin and a powder inside. I have an idea for your logo, instead of having to burn it in. Try using the coins that Doug from Pohlbarnproductions uses. He usually adds paint to make it stand out. Hope it helps. Again, I love the piece. ❤❤❤

[@gregj2647]

Nice job. I’ve made salt cellars before but never thought of using a brass rod. I rough turn the sides and lid then install the magnets, remount both pieces on the lathe together and do the final turning. That way everything lines up.

[@rondamcfalls7696]

Welcome back. We found your channel while you were absent & watched a lot of your story. We're glad to get to follow you on your renewal turning. God bless you

[@jamesschrum8924]

Glad to see you back! Three years pasted quickly! Very nice work.

[@jasonmckenzie3502]

Great to see you back turning again❤ The logo iron, it could possibly be that the iron isn’t getting as hot as it needs to for some woods. For example it may burn better in softer type woods and it so much in harder. If so then may be it’s as simple as that you need to hold it for a lot longer and with more pressure in the harder woods. Just a thought. In any case.. As I said, it is great to see you back turning and getting joy from again..

[@charitybrown4274]

I’m so happy to see you! It’s been a busy week so far for me So I was so excited to see you turning again 🙏

[@johnfrye8452]

What a nice surprise to find you are back turning again. You look so happy.😊

[@michaellombard4544]

Kim, four thoughts. 1) Welcome back. You have been missed by a lot of people. 2) Ignore comments by twits. I have taken woodturning classes all over the country and have yet heard an instructor say “OK children, don’t forget to take you wedding rings and wrist watches off”. 2) A really good way to line up the hole for the magnet is to use the circle center finder attachment on your tri-square. Center it over the hole for the hinge pin and it will line up exactly on the other side of the lid. 4) I would not use CA for the magnets unless you scuff them and then you run the risk of scuff right through the very thin chrome plating. I find epoxy works very well on them.

[@KimTippin]

Thank you! I appreciate the tips for sure! I will try that for the next one. :)

[@chrisrogers-yv6gl]

Hey Kim, I know you are a pro at this but I have a little trick that I use to burn my brand. I chuck my brand from my center stop and then get close to the part and lock it in. that way I can dial in the pressure for an even burn imprint. As always, I love the work that you do and get inspired to turn again. It's been to long since my last piece. Thank you for the video. I'm happy that you and your family finally have the house and property build and all that going in the right direction.

[@tommywalker77]

Kim still has it very nice bowl good to see you back

[@sabbatia2759]

So glad to see you turning. It is lovely.

[@mdaley3102]

It is so good to have you back, you’ve been missed so much by all your followers. I’m very glad that you guys are settling in and you’re back to doing what you love and helping us all along the way. It’s very cool that your kids are interested in turning too. Can’t wait for all the things to come and your bubbly personality that make your videos even more fun to watch. Take care and welcome back

[@jonnyslathecrafts]

Good to see you back. The salt cellar is a future project for me. Thanks for the info.

[@oldmanriverwoodturner]

Welcome back Kim, you've been missed. I know what it feels like to not be able to turn for a long time as I forced to move into an apartment for about a year once. I have enjoyed all your videos in the past.

[@pamcoopenberg1274]

Glad to see you back and doing what you love 🙂

[@greasydot]

I have missed you greatly. So relaxing to watch you work and you voice is so soothing.

[@RayApodaca-DacaTimberworks]

Good to see you back, I'm a new turner and found your videos while you were away and became a fan. You're so correct about the therapeutic of turning, i had some life drama happen and keep me away from it for a couple of months and could feel the stress, anxiety and anger start to pile on until i was able to get back to it. Great project that i will have to try, thanks.

[@davidclauson5256]

Happy to see you back!! We know it’s been a long hard road for y’all. Looking forward to seeing the next video. Stay safe and God bless.

[@roberttilsley8647]

It is good to see that you are back! I/we missed you! Great project, very nice.

[@StephensPenTurnings]

YAY!!! Welcome back. Nice wood choices and yeah, just go make shavings!

[@josephfernandes8667]

Awesome. Nice to see you back. Lovely project.

[@davidlamarche6957]

It's nice to see you back in action again, after such a long hiatus.

[@jackpons4877]

Great job 👏 welcome back Kim.

[@tammybledsoe3718]

Woohoo! Welcome back! We missed you!🎉 I've just got gotten back to turning after a break (busy life). I did the same thing at the bottom but made a "funnel", lol.. I decided to fix mine with an insert and base to make a nut dish with the center to hold the tools.

[@jamesbrasfield5688]

It’s great to see you turning again. I really missed your videos.

[@boxcarjimmy4671]

Great to have you back and you have made my week with another great video who cares about the mistakes it's beautiful at the end of the video thanks for sharing your experience and video and I have a big smile knowing that you're making more projects again and I look forward to seeing the next

[@nickstrain3482]

Kim is Back, happy days.

[@FinisiusMaximus]

Finally! New Kim Turning video!

[@grahamlavis5742]

Welcome back. It's great to see you up and running again

[@trevormorley3745]

Glad to see you back turning again, I've missed watching your videos xx

[@williamellis8993]

Really nice, Kim. It's great to see you back at it. We've been anxiously waiting. Bill

[@jwrowland77]

SOOOOO happy to finally see ya back on the lathe and making videos again! I know it’s been a process. Can’t love this video enough!! Turning is a very therapeutic! As a Veteran with PTSD, it helps me a ton get out of my head and just relax (even when things don’t go just right on the lathe.)

[@KimTippin]

#truestory !

[@texanasimmons1761]

Congrats on the shop being done! Im excited to see you start turning again, Ive missed you! The salt cellar is wonderful! I love the wood!!❤

[@KimTippin]

Oh gosh thank you so much!

[@jeffweese4551]

KIM! Welcome back -- yay. Happy day!!!

[@maurinec.4784]

Welcome home Kim! ❤ Sure have missed you and your smile! Shop looks great. When i turned, i used your abrasive and polishing pastes. They work great! Again, welcome back ❤

[@johnroyall2577]

What a beautiful finished piece. Welcome back.

[@kevingaddis7276]

Kim we have missed you.

[@robertcorrell4506]

Always a joy to watch your posts. So glad you made it through Debby! Just skirted us here in Gainesville. Be blessed and be the blessing!

[@CovenGraphics]

glad life is letting you do this again, missed you!

[@joeehrlich2898]

Kim's back!!, Kim's back!! Kim's back!! Now all I need is some ice cream and life will be back to normal!!! Yea!!! Holly smokes girl! Your home is beautiful! Your shop is so awesome and you look good first time I have seen you with a smile in a long time!! I already look forward to next week!! If it works out for you, no pressure!!

[@KimTippin]

🤗🤗

[@donaldbell31]

Welcome back. I'm glad to see you back at it.

[@harveypflugerh5901]

Kim we have missed you, welcome back.

[@scottmedori1437]

Great to see you back. Very nice project

[@glennmoreland6457]

Now you've got your workshop back... 🙂🇬🇧

[@ericparramore5136]

Welcome back. I pray you and yours are well. Beautiful little box, by the way

[@WhiskeyDale]

Sooooooooo glad to see you again.

[@SteveC38]

😁 So Awesome to see you in the shop again!!! Great piece, and a great idea that I wouldn’t have thought of! God Bless You and Yours🤗 It’s good to have you back😁

[@KimTippin]

🥰😘

[@chadgilles6579]

Welcome back! You've been greatly missed!!

[@EarlAnderson-k6o]

So glad to see you back at it Kim!

[@corymichaels8670]

Welcome back! A thought on your burned in logo… I’ve watched Doug do his before the final finish goes on. Once he burns it in, he sands it back until the logo is clear. Then he applies his finish. I can’t confirm from experience since I haven’t gotten my branding iron yet.

[@martinsmith49]

So nice to see you back. Looking forward to seeing more! God bless