wall switch upgrade diagram for diy smart home automation project

[@leodjetv]

I can understand the wiring demo, but for the program software its very complicated to do, hoping that i can do well to make a program on my own, someday i will learn your demo as beginner for automation control, thanks fo the sharing

[@KinCony]

thanks

[@buadel4019]

hi this Mohammed with you how are you where are you from and where i can get the control panel and switches

[@KinCony]

we are in China, you can order product from our online store: kincony.aliexpress.com/

[@derrayan731]

Hello dear. What is the appropriate application on the phone for this experiment?

[@KinCony]

all software can be used download from: www.kincony.com/document

[@blackdaan]

can i add another relay board.. i see this way you have the rs285 port used for all the buttons..

[@KinCony]

switch terminal board connect to relay board by RS232 cable. if use another relay board, need another new switch terminal board. one switch terminal board MAX support conect with 32 buttons and ALL ON,ALL OFF 2 buttons, total 32+2=34 buttons.

[@dawodmhmad]

Can split air conditioner be operated with temperature and cold control

[@KinCony]

usually control air conditioner by KC868-G for send IR signal.

[@moussasy4286]

Bon soir je sui Mauritanien et je sui électricien jai bocou apresie votre travail je ne comprend pas anglais mais je souhaite une très long vie

[@KinCony]

hello

[@cikguheng9079]

hi. how long cable from the controller to wall switch...

[@KinCony]

MAX support 300 meter

[@cikguheng9079]

@@KinCony tq

[@ferdinandmojica7244]

How to order please? How much?

[@KinCony]

you can order from our online store: kincony.aliexpress.com/

[@farkhamlove]

Please explain about connect the power cable wall switch state indication led. Are you have diagram(One power line) for this?. please send to me.

[@KinCony]

way 1:every relay output power connect with a relay, if you relay output is DC12V,add a DC12V relay output a dry contactor signal, then all these added relay connect with a new power supply for DC12V, the added relay another output point connect with wall switch panel's LED indicate. way 2: every relay output power connect with a relay, if you relay output is AC220V,then add a AC220V relay as same as below for create a dry contactor signal for wall switch panel's LED.

[@ariestootle4139]

hi, do you have a supplier in the Philippines ?

[@KinCony]

sorry,not have agent in your country, but now we can send to Philippines directly.

[@cikguheng9079]

sir...if the lamp is shorted..the relay contact will blow...the controller has the ability to cut off?

[@KinCony]

this need add circuit breaker. if short, so will break.

[@moussasy4286]

Ce technique nai pas encore arrivé chez nous merci log vie à vous

[@KinCony]

you are welcome

[@Azam19820611]

If I want to install 2 and 4 button light switches then I use K1 and K2 ports for 1st switch and K3, K4, K5 and K6 ports for 2nd switch. Is it correct?

[@KinCony]

yes, no problem.

[@KinCony]

but 2 and 4 button panel all need connect with "KCOM" line.

[@mykolageshta4565]

Hello Do you have video (information) how to set 2 -4 light lines from one switch ( one button) ? Maybe there are settings: double click, long click? Is it possible (for example) to double-click to put off all lines?

[@KinCony]

there are two way: 1: use KC868-COL define any digital input for relay output. 2: if you can write program code, you can read input for the hold time, then trig different relay output. this program can running on windows PC or raspberry PI.

[@mirkotra]

@@KinCony I have Switch terminal board and KC868-H32B. Is it possible somehow to read inputs from switch terminal board for longclick? maybe in node-red? Do I need also KC868-COL to do this? I'd like to make "turn all off" on KC868-H32B with longclick any button on switch terminal board.

[@KinCony]

@@mirkotra the easy way to add KC868-COL , you can set longclick hold time , such as 2s,3s to turn on/off some relays or all relay on/off. i don't suggest noed-red, just only a long click function, use a PI is not good, KC868-COL will be more stable.

[@mirkotra]

@@KinCony Thanks for your quick answer. Just to be sure, is with KC868-COL possible to manage all 32 digital inputs on Switch terminal board?

[@KinCony]

@@mirkotra if use KC868-COL , it can work without switch terminal board, all switch panel connect with KC868-COL's digital input directly.but KC868-COL have 16 channel DI, it can connect with 16 switch panel.

[@yuvarajblackpearl]

I want to control 48v dc loads upto 10Amps .. is it possible with this ??

[@KinCony]

it support.

[@kodjoaziaka6137]

Hello, It is not clear how you integrate the old classic light installation with your solution. It is important to understand which types of modification need to be done for old construction to support your solution.

[@KinCony]

replace with dry contact wall switch work with smart relay controller.

[@kodjoaziaka6137]

@@KinCony what is dry contact wall switch?

[@KinCony]

@@kodjoaziaka6137 momentary switch.

[@isholaridwan8273]

We're I won't to buying materials

[@bilaltheaviator5838]

Please make same video for new touch panel

[@KinCony]

already have it. kzbin.info/www/bejne/enjXk4VslqxnbsU

[@manumichael1385]

Indipented light indication. You say each statuse need adapater that is very expencies.

[@KinCony]

another way, you can use one power, every output use a relay feedback to panel's LED.

[@smart-electromontazh]

Здравствуйте! Мне нравится ваши выключатели. А их можно комбинировать с розетками под одну рамку.

[@KinCony]

yes, support.

[@smart-electromontazh]

@@KinCony Could you send me a link to these sockets that fit these switches.

[@KinCony]

@@smart-electromontazh now in China is during new year holidays, when begin to work, i send you a link.

[@smart-electromontazh]

@@KinCony Thank you very much, I will look forward to it.