King Ranch Interior swap in OBS F350 Finished!

[@DEBOSSGARAGE]

Ideally we're looking for a 2009-10 Super Duty steering column with tilt. Not sure they came with telescope those years, but would be cool. If you've got something, hit us up! [e-mail]

[@Amerikanskis]

Hi rich, please look at this channel that does OBS>new ford interior swaps. Im sure it will help in some way. its like the guys main job for a living. kzbin.info/door/OaEt4kjNPlwQPaoOaRoiTw

[@ianitusluminous8937]

#teamseas..................

[@thomasmurphy9514]

Just sent you the link I hope lol

[@bondonutz1]

@DEBOSS; Steering wheel is bent.

[@Gendreau113]

Sadly the 08-10 column didn't come with telescopic. But the 11-16 did, and you can swap that into older superdutys and get your Telescopic!

[@MrRoundb]

You’re probably one of the most skilled all around master technicians in North America and somebody insults your welding. Clearly a small person with big envy. Your patience and skill does you credit

[@FoolOfATuque]

There’s a lot of arm chair people in this world. Just have to ignore them and get out there and do it.

[@caveone-365]

Coming from a 25+ year tech myself who works on anything and everything, I’d have to agree with you there👍🏻 Rich is in Canada though so technically not North America but whatever 😎

[@jonfeuerborn5859]

Meh. Quite often, an insult has more to do with how a person chooses to take a comment like that rather than saying something about the fella that delivered it. I imagine that was intended as a friendly ribbing rather than a sharp jab. But then, I failed sensitivity training, so what do I know?

[@nealkeeble]

A grinder and paint make me the welder I ain't is probably known by your viewers from AvE's channel, and I'd say it was just meant to be a good ribbing because most people that have followed this series this far are not going to beach about your butt welds DeBoss:P love your content!

[@Justin_Buser]

Bro my dead granny could lay a bead better with her snatch than he could.

[@rpowell0173]

This guy is building the ultimate truck!! The best of all worlds. Great job man!

[@redneckpyromania6965]

Precisely what i was thinkin

[@timcanizares5240]

Yes sir... a dream truck for me

[@wyattlewis8671]

I don't know about that, I'd rather have a p pumped 24 valve 5.9 with an eaton or spicer manual behind it. There's a lot less to go wrong than a HEUI engine with an auto. It's a lot easier to turn up a 5.9 cummins if you want more power too. The cats are good engines, but the allisons are pretty overrated due to being about the only decent part in the GM duramax trucks.

[@timcanizares5240]

@@wyattlewis8671 He already has a 5.9 p-pumped 24v in a Chevrolet pickup

[@f-j-Services]

@@wyattlewis8671 No no no, if this was a DT466 swap with a 7 speed and split locking rear... then we would have it set damn right! Put a flatbed on it and a goddamn hoodstack!

[@maxwellkerry3821]

Running the Cat/Allison combo in an OBS was interesting enough, but adding the newer interior is what makes this must watch. Enjoying the ride Rich, I can’t wait to see the end product, but I don’t want the journey to end either.

[@nathaniellangston5130]

The Holley dash with custom guages is amazing! I have seen custom guages in cars but I guess I didn't realize exactly how they did it until I saw the screen capture of going through whatever graphics editor Arron did!

[@brandonstevens548]

That 12" Holly screen, im slowly falling in love with that set up. Those little touches on the back ground my God 😍

[@aSinisterKiid]

This thing is gonna be a beautiful monster when it's finished. I admire your ingenuity to mesh all the elements you wanted together into the perfect combination. It looks incredible all put together. You've done a hell of a job.

[@iodar]

Nothing beats a hot coffee, being at home working (it's 12:40 pm in Germany btw) and watching a new episode of the FTreeKitty saga ☕️💻👨‍🔧

[@jtgrec3179]

Wow, that Holley gage system is really slick, way better then stock

[@priusrepellent]

I love Rich’s positive attitude, and knowledge about almost everything! And this channel needs more subs, he should be over 2million!!!! Let’s GO!!!!

[@samuelanketell8190]

Iv been a welder for 25 years in Australia building trucks and I'm very impressed by the construction of your firewall gearbox tunnel and floor pans . Anyone criticising your welding is probably just jealous of your project or they wouldn't know what a welder was if the fell over one. Keep up the excellent work mate it's a well thought out build with superb attention to the finest details 👍

[@donrives136]

Best KZbin channel on the internet. Hope you are very successful in your endeavors. Thank you for the technical content.

[@jonashestner661]

I admire the calm round the nosesmack, if it was me the whole thing would be burning in the driveway 10 secs after.

[@davedarling6512]

Yeah the string of curses I let out would melt the camera

[@6.0powerjoke23]

Amazing to watch the customization Aaron did on the dash. He's a patient man. So are you Rich. Beautiful truck

[@David-eq8yg]

Rich, I'm a collision center manager, now heading to a carrier company to manage their tractor trailer repair facility, in my years of automotive repair, rebuilds, both personally and professionally, I've never seen a man that has mastered so many great skills!! I've been watching your videos for just a few weeks now, and I'm now hooked! You do the work that so few will even attempt this day and age! It's a pleasure to watch your builds. Thanks brother.

[@grc8242]

This is impressive man. you brought back that F 350 in a way that changed the game. perfect, the dream truck

[@iodar]

Man I love this channel. Everything Rich does is cool and relaxing to watch and Aron puts on a show every time. But I cannot get used to the digital dashes. Probably easier to use and configure but I love analog gauges.

[@DEBOSSGARAGE]

Thanks for watching!

[@fivepointeightnate]

My favorite builds are old vehicles with current technology. You have made a wonderful masterpiece!

[@brokenbiker09]

Guts move, that sound deadening is way easier if you go in smaller lengths. That dash display is fantastic! Say a big thanks to the artist who designed it, it is a piece of art.

[@massminer2343]

Your puppie's comedic timing is perfect. Chomping the bottle when you're talking about being quiet

[@nunyabinis]

Props to the dash designer. Thank you for including that in the video

[@remraf72]

Genius truck ( and car builder)! This IS a freaking work of art and ingenuity! Comfortable and most importantly functionable. Were totally loving this build Rich ! Plus, you aren't slacking at all on the filming and explanation of what you're doing with each segment. A W E S O M E ! Warmest Regards from Arizona.

[@DEBOSSGARAGE]

Thanks for watching!

[@JuanOrtiz-mo8be]

Men!!! You over engineer everything ! You are a genius! God bless your talent and patience!!!

[@BBBoiko2004]

Rich, you are the best youtuber! Because you are doing so many projects at the same time, and keep the pressure in the viewers. Every morning i open you channel to see is there a new video.

[@thahitman2]

The new dash looks 100X better then the old one. Another badass build bro.

[@mattns13]

Those who can DO! Those who can’t critique those that can on the internet! Awesome build! Keep up the good work!

[@Bobstone2131]

This is hands down my favorite build on all of KZbin. The OBS Ford's were the truck to have and still hold a deep spot in my heart. Beats spending upwards of $70k plus for a new truck.

[@jayer-su3hu]

Gotta say I'm no Ford fan but I admire your passion here. It's a ton of work to do what you are doing here but it does look good. Love how the Holley dash looks. Keep the vids coming

[@xavierwinchell8700]

I like how you did to display on the truck everything looks really well can't wait to see it done

[@Redacted00010]

Watching that custom dash being built on CAD was absolutely amazing. Truly a skilled professional doing that, awesome video !

[@davidredlinger876]

Wow Rich, a CAT, modified interior King Ranch in old Ford and I really like how you used the Holly dash mount instead of gages......really impressed!

[@johnbernier2917]

A RESTORATION LIKE this not many guys would do it it takes time and money good job man keep up the good work

[@fryreartechnology7611]

Too think how awesome it would be to have this as your truck. I know I would love it. To drive something that nice to work, with my family in it, pull my boat, and pull anything I want. You found a way to make a ford the perfect truck. They have had some of the best looking trucks for as long as I can remember but swapping out the power plant makes it truly a GOAT of a truck. Somebody will be so happy and proud of this build.

[@DEBOSSGARAGE]

Yeah, me! This will be our daily. No plans to sell

[@fryreartechnology7611]

@@DEBOSSGARAGE that's why your making it so nice lol. That's so nice and everybody who looks at it will want it. I know seeing a old truck fixed up where I live in Arkansas just does something to you.

[@gregbranham4925]

Deboss that interior looks incredible and those gauges that Aaron made are perfect. Bravo!

[@marcusholtzheimer9316]

That designing of the Guage cluster was super cool man

[@Thegr33nmachine]

That holly gauge set-up is absolutely gorgeous and then the dash swap! I was bewildered by the firewall swap! I certainly aspire to be this skilled of a technician/mechanic/builder.

[@paulnicholson3747]

Easily the most badass build I’ve ever seen on KZbin!

[@chuertas003]

Man, that instrument cluster has to be the coolest feature I have ever seen in an old pick-up truck. You guys are full of talent.

[@jammils38]

Buddy this truck is going to be on a whole new level of bad-ass-ery. It's an absolute beast!

[@Low760]

I love how the seat only goes halfway up Rich's back. Comfort!

[@gavster89]

You probably already know this Rich but when you're cutting bituminous materials (like sound deadening or roofing felt) if you put a drop of light oil (3in1 or whatever) on your knife blade it will stop it gumming up.

[@narmale]

tin snips work really well on the heavier stuff too

[@samuelberghuvud5527]

I Will keep this in mind for the future, thanks man

[@FoolOfATuque]

Good to know! Thanks!

[@skerky10mm]

One of my favorite builds on KZbin right now. Always excited to see a new update. You probably already found them but on Amazon if you put in m12 adapters there are pre made m12 battery sockets wired with leads and mounting flanges for like $14 usd. There for amateur robotics.

[@molivroman9806]

This is my second tour of the building one year later. Still brilliant. It makes me feel somewhat inadequate but then Rich said he had 30 years with Cat's so it dulled the pain.

[@CarswithNash]

Wow that looks amazing Rich! I wouldn’t worry about that guy who thought your welds didn’t look good, some people don’t understand sheet metal and they think you should run a pretty bead of dimes across the panel.

[@ericbrinson9741]

It’s incredible how far that thing has come. It’s really shaping up now, can’t wait to see the rest of the build

[@MonkeyWithAWrench]

That truck is going to be so badass. Its very unique with the drivetrain alone, but that interior kicks it up a notch on the cool factor.

[@1leggeddog]

Damn i never thought an interior was so intricate to make fit

[@napluvr4173]

New subscriber here. I just binge watched this entire build series. I just have to say I have never been so excited to see a project come along like this. My favorite part was watching Rich's face when the Cat engine fired up. I saw the look of stomach turning apprehension and anticipation, turn to pure joy and exhilaration. And that engine sounds like a beast that can pull a house off the foundation. I look forward to this following this build. Cheers from Michigan.

[@DEBOSSGARAGE]

Awesome 😎 thanks for watching!

[@monicasmith936]

Wow, I am so impressed with this interior swap...!!!! So impressive....!!!!

[@FanatikBuilds]

Don't know how I missed this one till now. Looking amazing guys - just like it was meant to be!! 👌👏

[@jerelscott9523]

Whoever made the “welder” comment probably couldn’t wire up a kill switch on a go-kart. Really enjoying this build.

[@ifgezroxy]

People like that, usually can't even weld themselves. There is nothing wrong with Rich's welds, considering he is not a welder by trade. It does the job easily. :)

[@bannedbycommieyoutube5time920]

He also hires the other gentleman when the welding is trickier. I think he does this more than he needs to because the guy needs the work and Rich seems to have a good heart.

[@ifgezroxy]

@@bannedbycommieyoutube5time920 yeah, I have noticed this too. But it's good. Guy gets work, and Rich avoids all the moronic welding comments. :)

[@codyroger9581]

It’s pretty awesome to build and drive a one of one. I’ve always had all my trucks be tastefully different then everyone else’s. Can’t blend in with everyone else. This is probably my favourite build to date, but the bronco may change that. Keep up the great work!!

[@thehandlesticks66]

You're such a talented and nice guy Rich. I wish more people were like you.

[@Buzzcutt1]

I am unfamiliar with the F550 steering wheel mounting system so take this with a grain of salt. You may be able to find a machine shop with a rotary broach capable of cutting the hex in the center of your interior matching steering wheel hub. Also, you can get hex tubing and replace the center. Hope this helps solve your problem. The truck is looking good! Thanks for the great channel.

[@matthewwallace2981]

Your dedication I unmatched. That truck is beautiful well done sir.

[@DutchMastermind]

I've had some project cars, trucks, tractors and construction equipment my self but even the thought of attempting a project the sheer size and complexity of the projects you do just seems daunting. Great video as always, keep it up.

[@paulnicholson3747]

Fricken killer video. I’m watching it for the second time because you tackled so many interesting problems. I went away for school so I haven’t been wrenching for some time. Seeing these videos takes me back. Goin home in a couple weeks to wrench on my buddies 97 5 speed 7.3 Such badass trucks. Still never been more jealous of a trucks. That cat is gonna make for a badass truck!

[@dmremtp]

This is probably one of my favorite video series ever. I can't wait to see this truck finished.

[@terzoanthony]

Your skillet and mechanical aptitude blows my mind 🤯💯👍🏼

[@jiminycricket2230]

That truck is going to be DE LUX!! The Holy dash is a game changer. Pretty amazing the way it can be all configured and it looks so nice. Very fitting touch for such a beautiful truck.

[@cpa2132]

The cat meow wrapping up every video is the best touch lol 🤌🏻🤌🏻🤌🏻

[@ashtonmariefranklin1981]

I likes it, old body style with new body style interior. Surely does say built not bought. Really like the holley dash setup. Its cool how it can be customized for any application.

[@magnificentshine1]

WOW!!!!! Man everything came out looking AMAZING, GREAT JOB!!😲😲😲😲😲 I am 1000000% absolutely in love with that holey dash set up, that is SICK!!!!!!! Again, absolutely fantastic!!!

[@TheDogLife5225]

I love how fast this is coming along. I enjoy hearing him talk through the obsticles and solutions. I myself, see the problem and then stress over it for a few days until I force myself to just do it. This project would never get finished. Lol

[@literallyshaking8019]

“Grinder and paint makes me the welder I ain’t.” -AvE

[@super6954]

I worked for a guy as a mechanic/ welder and fabricator for anything you could think of on a farm or his seed cleaning plant. One day he decides I'm busy and welds a grain truck tailgate that was busted in one corner. This is a grey color truck box, and he paints his weld yellow with a spray can ! I just took one look at it thought what a mess and said he didn't need to highlight his crappy underpowered gasless mig weld with yellow paint, people would still see it without.

[@thomasmurphy9514]

Man you have done a great job doing that truck spinning wrenches 45 years so I have seen some sruff

[@DEBOSSGARAGE]

Thank you! Much appreciated

[@thomasmurphy9514]

I think I might have found your steering column I will send a copy and try a link in your email Facebook marketplace

[@Wordsnwood]

put it in, take it out, put it in, take it out again. once more. last time. okay once more. I never knew that mechanics needed to be so patient! (I'm not a mechanic at all, but I find it fascinating how you are pulling things together from so many sources to build this truck!!! And then here we are in Ontario and it's going to be coated in winter salt so quickly.)

[@cynzhero62]

Hey Rich👋 Remember this!. You and this truck are! " One of a kind ". You will know it as the world knows you!. 🤞😎

[@johnharmon6615]

Omg love the way it turning out u cant tell that it is cat powered and the up grade dash omg love love it

[@mikewest5529]

You had my heart with the king ranch interior!! Looking like a king!!

[@dylancash2351]

Literally binge watch the entire build in one night

[@meominest3407]

Incredible work. You should be proud of this project. Can't wait to see the complete truck!

[@dangerrangerlstc]

MORR had the custom built Corvair wagon turned off road buggy/recovery rig, Fab Rats is rebuilding an old Suzuki, and rich has the F Tree Kitty. KZbin is an awesome place.

[@davidanderson2393]

Nothing tougher than trying to get old dirty oily painted metal clean enough for a good clean weld, an exercise in true patience and creativity. Looks great

[@bubbagumpshrimp9743]

I used my 30 at work to watch this, well worth it as always. By far the best car content on youtube in my honest opinion

[@DEBOSSGARAGE]

Thanks! Appreciate that

[@christopherallen9615]

I have a cold and have been sitting here binge-watching this series. Imagine how lucky I feel to see this latest video was two days ago. I have not had to wait on a single new video! I started this series thinking OMG this is so cool!. I am ending this last video thinking while this guy is tenacious and has done an awesome job. But my blood pressure is up and I'm starting to think that a cam and turbo kit on that 460 would have been a cool alternative LOL.

[@80spodcastchannel]

it's scary how good a modern interior looks in an older body style.. the only thing is the seats are just a tad wide for the B PILLAR seatbelt enclosure cladding, but touching a bit, is better then it won't work at all. Liking the build and cannot wait for the final fire up

[@anthonyquinn9399]

It’s a pleasure to watch you work some sir

[@cartercartier4389]

Interior is looking great. It’s a ton of work but we’ll worth the outcome. Motor and transmission combo is also on another level. Great job

[@rilyb15]

What a great way to upgrade. Seems a whole lot easier than forcing all the new into the old. Cut it and make it work 👍🏼

[@trevor6894]

This is awesome man!! This truck will out last and look better than any other trucks on the road today.

[@nathaniellangston5130]

I am REALLY impressed with all of the work you have done on ALL of your builds, especially all while having budget in mind!

[@David-eq8yg]

The digital dash is outstanding! I love this truck

[@DeadReckon]

Hey man, as someone who ain't a welder, I can tell you right now that most if not all of these people criticizing your welds have probably never even tried to weld. It ain't easy people! This truck is looking good, wish my '93 F150 Flareside was this nice!

[@xMitEvox]

Damn looks like it’s part of the vehicle the way you installed. Best channel ever, for reals keep it up.

[@Ramcat_Vlogs]

Woohooo I got my tape boss today !!! Shout out form New York !

[@POLOLOUS3]

When you described putting the holley dash I was skeptical but the fitment work you did to it made it look better than factory.

[@trudge84]

Wow dude. What a awesome project. That truck is really gonna be something when you get her all buttoned up. I am really impressed with your thought process and how you work through problems. Great work.

[@homemaintenancebyclive153]

Looking awesome there Rich. Enjoying watching you work. Your level of expertise and attention to detail is amazing. Keep up posting the vids. Frm South Africa

[@David-uz9qw]

Favorite build on KZbin. Absolutely love this truck

[@stevemilley8903]

You're one of my favorite YT channels. And definitely my favorite Canadian YT channel! And I really appreciate your IG post today towards our Veterans. Thanks eh!

[@colebertils7359]

Really enjoying following this project Rich! Although a lot of work, that interior looks awesome! Interesting how I find myself getting out of bed saying “here we go” lol

[@kimchipig]

These videos are by far my favourite, Rich. Your skills are very impressive.

[@kennethperian4370]

Great job showing and telling, you are the man great job keep on trucking. That means keep doing what your doing, cause you’re good at it or I’ll say great at it . Well see ya next time see ya bye bye.

[@bandjolyn]

That truck is a work of art, Rich! Love the gage cluster. Great work, thanks for sharing with us!

[@bubbakushingtonIII]

Idk why but this channel and Vice Grip garage reminds me of the old Power Block on sunday mornings.

[@ronhelman3985]

The New dash looks outstanding 👍👍. Great work.

[@cliffsta87337]

I’m not a ford fan but I’m enjoying this build and the bronco.

[@GeneFever]

Amazing work getting all that to fit and function, and the Holly dashboard Aaron created is top shelf. I've used B-Quiet products in the past, quality stuff for a good price glad to see they're still at it and hooked up with DBG.

[@golffit3066]

Massive undertaking with incredible results. I recall watching when you bought the white weapon!