🔧 How to do Printhead Maintenance and Dampers on Epson L1800 and Similar Printers - DTF Printing

[@awoyemioladiji9894]

Thanks for this great video. I want to change the sublimation ink on my printer to dtf. Can I use this method to get rid of the sublimation ink out of the printhead?

[@alejandrosanchez2852]

Great information thank for sharing, well done.

[@KingdomDTF]

Thanks for watching!

[@roseleathercraftsph]

I was hesitant to do this before but now I'll try it hehe

[@KingdomDTF]

Yes, go for it

[@svetlinkunchev4818]

Very goog idea for cleaning, I've order an extra set of dampers and I will try this method.

[@KingdomDTF]

At least for me have worked.

[@jrod1845]

Much appreciated

[@KingdomDTF]

You welcome

[@ruxbielmendieta9730]

Do a similar process, the only difference is that instead of doing Head Cleaning, apply ink removal. Carry out the procedure 2 times with spare Dampers and cleaning solution. I was away for 8 days, the L1800 machine printed great before I left (the prints came out very well). I came back, cleaned the dampers, loaded the ink and, to my surprise, the fourth white ink injector was almost 3 cm in the middle completely covered. For the next time I don't trust myself and lower the head and clean it outside.

[@KingdomDTF]

Maintenance is important.

[@quoctam1719]

17:38 ,How do you connect waist bottle ? Thank you.

[@KingdomDTF]

Getting out a line already connected inside to the back and used any bottle.

[@jenniferreyna2424]

@@KingdomDTF from the back? Or where cause I just leaned my printer 😂 and let all the ink come out on an old shirt.

[@ahmedadnan1489]

Thank you so much… can i use this method every night when i finish my work ?

[@KingdomDTF]

yes

[@ahmedadnan1489]

@@KingdomDTF Thanks 🙏

[@RamboyJey]

is it okay that there is slight bubbles in the dumper especially white and other cmyk colors

[@KingdomDTF]

That means it have air inside the dampers or line. Use a syringe to pull ink and eliminate the air.

[@ursdubel3585]

Muy grande este Kingdom DTF 👍What about cleaning the printhead and letting the cleaning solution in the cartridges (system) when you go to vacation and just simply run another cleaning when you come back? I am not sure if its a good idea, because the cleaning solution got strong alcohols in it wich may harm all the rubber and plastic parts if you let them soaked for a long period of time. Que piensas ?

[@KingdomDTF]

This video is old, strong cleaning solution is not recommended to use as wet capping because for a long period of time. That is why there is wet capping solution that is less aggressive and can be left for longer time.

[@POOCHOCATT]

I have the pro colored L1800 A3 printer the raster strip broke loose can I replace that, do yo sell those strips, I need to find some body that can help me fix this printer only had it for about 9 months. Any suggestions.

[@KingdomDTF]

We currently do not have that part, best options is contact the manufacturer to ask for replacement.

[@netclub]

Hello, i have a problem with white printing. Recently it stoped printing white, i managed to get all white nozzles back using a same method as in video, but only on white color. After that i managed to get 2 prints and then it got back to missing nozzles, and with each cleaning some nozzles missing some get back. Any idea what could I do to fix it?

[@KingdomDTF]

Elevate the ink tank and open the rubber lid, that help with air flow and gravity.

[@netclub]

@@KingdomDTF thank you for your reply.

[@methunsshopping6800]

my head is blocked totally. I use it only 1 day. and then use this process. but the head is blocked. what should I do? plz help

[@lissamaddox4597]

Can you leave the cleaner cartridges in the machine if you are gone a few days then put your ink ones back in the machine? If so how do you store the ink cartridges in the mean time so they don’t dry out if you are gone a few days?

[@KingdomDTF]

Yes, once you do the cleaning you can leave it there. Put a ziplog back to the dampers.

[@tsungpiozukum3654]

Is it necessary to take out the print head and clean it manually or this method will be ok.

[@KingdomDTF]

Depending what type of situation you are having. Normal cleaning like this is ok but if is something else or the printhead have dry inks underneath.

[@jordanlotus188]

very nice

[@Trendzya]

Absolutely useful information Only one thing is is enough liquid in damper to doing 2 or 3 time head clean?

[@KingdomDTF]

Yes, and if you don't see the solution going through you know that nozzle is clogged.

[@mehmedhyuseinov4626]

Hello! Can I use the same method for UV printer too? Thanks

[@KingdomDTF]

My guess is yes but with cleaning solution for uv inks.

[@alfredomariaiorio8718]

Hi, using wic reset, i can also do a "medium charging" of cleaning solution. Which way do you think it's better, 2-3 head cleaning or 1 medium charging of solution? Thank you in advance

[@KingdomDTF]

Is going to depend on how bad is your clog. Start with a simple one and see how it works.

[@mrs.g2113]

Thank you for this video Can I use this solution on my Epson XP-15000? Thank you in advance

[@KingdomDTF]

Yes, in fact any solution that is for epson printhead.

[@mrs.g2113]

@@KingdomDTF thank you for replying much love

[@nishakh5]

Hi. I intend to change ink brand. Do i do this?

[@KingdomDTF]

Flush the old ink s and then use the new ink.

[@tsungpiozukum3654]

Can we leave the damper filled with cleaning solution and keep it like that for a month or week's??

[@KingdomDTF]

You need to do a wet capping with the wet capping solution to keep head underneath moisture to help not to clog. There is one red solution that can put there and also in the nozzle of head and the head is good for 30 days or so, that is for vacation mode but I forgot the name. One of our managers is in talk with one company to bring that solution.

[@matthewhutson450]

Hi. Epson L1300. In the red I have just one nozzle that does not print the one next to it print about half what it should, every other color and nozzles print perfect. Problem is i can see that missing line in colors that use red. How can i clean just the red to get rid of that line, I have taken out the head and pushed cleaningf solution through, did not help. How would u unblock that 2 nozzle lines. Its not bad but not good for perfect prints

[@KingdomDTF]

Using a good cleaning solution. Try to use hot distilled water and push to the nozzles.

[@hiroshikawai3300]

Great video! Thank you very much. One question. How do you keep the original dumper with ink in it while the dumper with the cleaning liquid are sitting in the slots for the week end or during the longer vacation?

[@KingdomDTF]

I put a plastic bag to the original with ink to keep them safe and then do maintenance when is ready to put them back.

[@johngrate8100]

@@KingdomDTF plastic zip lock bag do you put just the dampers in or the dampers and the lines with it?

[@KingdomDTF]

@@johngrate8100 Just the dampers unless you want to uninstall all the lines.

[@pietpompiepompiepiet940]

@@KingdomDTF hi. Thanks for tip. I have a L805 epson that is still stock standard inkjet. Want to convert to dtf. How do I clean the ciss tank from normal ink? Can i wash with cleaning solution?

[@rishirajomivaidya5648]

by doing this i need to change my both white damper as it enlarge the rubber of damper when syringe is inserted....

[@KingdomDTF]

No, you only change the dampers if they are getting bad.

[@rishirajomivaidya5648]

@@KingdomDTF after how many days do we need to change head clean manually by pouring head cleaning solution n all..

[@joaopereirauk]

hi I have strange issue with L1800 not printing ink not coming out printhead not printing I done head clean still the same and then I both new print head install and I still have the same issue any idea?

[@KingdomDTF]

Maybe is the software, try to re-install.

[@ronlasala]

Hello! Is it a good idea to remove the dampers after closing my shop?

[@KingdomDTF]

For the L1800 after finish you want to clean the head so you remove the dampers.

[@creativelytiffany]

After doing the cleaning with the solution, do you let it sit for a few hours or can you go ahead and put your ink back in and do your print nozzle check?

[@KingdomDTF]

You can go ahead and print after cleaning, the idea is to get good nozzles so you can print good jobs.

[@creativelytiffany]

@@KingdomDTF ok cool. I’m running into the issue of my whites not printing. I’ve done the head cleanjng with cleaning solution but the whites are still filled and the other cartridges are empty after the head cleaning. Not sure why or how to get rid of the clogs

[@moea3735]

How often do I do head cleaning and do I do it before I print or after when im done?

[@KingdomDTF]

Before you start printing you do a nozzle check, if is good no need for head cleaning. If nozzle check is not good then you need to do cleaning until nozzle check is good so you can maxima the print. You cleaning any time your nozzle check is not good.

[@moea3735]

@@KingdomDTF ok I see, I heard you need to print everyday how much do you need to print then?

[@hiroshikawai3300]

Do you put back the dumpers with the ink to the original dumper slots and will turn the mahcine OFF, when you leave the printer for the week end?

[@KingdomDTF]

Yes you can do it

[@nizarmehemmed9062]

thanks for the informitive video . I' ve epson stylus 7880 and I would like to convert it to DTF printer . How can i do that ? i hop you'll ansewer my question . thanks in advance .

[@KingdomDTF]

Yes, you can convert that one. You need to search online since I don't have a video your that model.

[@faris330]

I lost one printer head before because I went on a trip and when I came back the white lines were half blocked. Although I did a lot of printer head cleaning before going using the original cleaning solution. I also made sure the system was disconnected and the caitrage was removed and the head was clear from all ink. I tried to unblock using cleaning fluid and I even bought an ultrasonic cleaner but it didn't work (half of white nozzles were blocked). so then i bought another printer head and its working ok. I'm planning to go on a trip next week and I don't want to have the same problem. Can you please advise me what is the best way to clean a head and save it if you are going away for two weeks. Unfortunately I ran out of printer head cleaning solution, So i'm thinking of using (original windex cleaner and mix it with isopropyl alcohol). Any tips?

[@KingdomDTF]

Ultrasonic should work with an strong cleaning solution. When doing ultrasonic you need to start slow and have patience. The most I can tell you is clean it, don't leave it with ink and they put more cleaning so the head stay moist and capping station.

[@faris330]

@@KingdomDTF thank you for your reply.. what about the idea of using windex and isopropyl alcohol?

[@jenniferreyna2424]

This is the most helpful COMMENT! I swear I did exactly what you did and it’s very frustrating I ordered a print head. Cleaned my original print head with solution, alcohol, and acetone 😂 acetone I don’t think was a good idea but my husband recommended it so it worked but still no white ink coming out of my second damper 😩

[@georgemv8167]

Sir, is it possible to convert my Epson l 15160 to dtf ,can add white ink head in addition.

[@KingdomDTF]

This is the supported printers kingdomdtf.com/pages/supported-printers-for-dtf

[@dimension8172]

What is the diameter of the tube (inner and outer)?

[@KingdomDTF]

For the epson line? 1/8

[@dimension8172]

@@KingdomDTF The transparent tube for the waste tank

[@MajidKhan-jr4vk]

i check my nozzle some line missing. and also text cutting. i head clean 3 times. but still line missing and text cutting.

[@KingdomDTF]

Sometimes cleaning solution stays inside the nozzle, you need to do like 5 cleanings and print something so all that is out and only inks flow.

[@MajidKhan-jr4vk]

@@KingdomDTF 5 time head clean? or by but 5 time cleaning solution?

[@KingdomDTF]

@@MajidKhan-jr4vk With cleaning solution and then 5 by itself. Now you can put dampers with cleaning and print a few designs to try to unclog the nozzle, print something that has CMYK and also white.

[@F9x]

Is this just regular inkjet cleaning solution? or is there a specific one I need for DTF ink?

[@KingdomDTF]

Is solution that use dtg since inks are similar but not the same.

[@juvyjason9921]

Hello Kingdong DTF, when maintaining you dtf printer L1800, it is in a daily basis right? just also want to ask, as of now, have you changed your printer head? or the one in the video is still working?

[@KingdomDTF]

Yes, you do maintenance after finish printing to keep head ready for next day.

[@tomcollick8111]

where can I buy the dampers for L1800 to do this?

[@pietpompiepompiepiet940]

Amazon

[@gopinathsp9580]

Hi my print head getting clotted (Yellow and Black and White near by Black ink) i removed print head and using solution I tried to resolve this issue. But cleaning solution not getting out via print head nozzles. can you give some solution for this ? Thanks in advance

[@KingdomDTF]

Try an strong liquid solution, wait 15 minutes and then hot water.

[@gopinathsp9580]

@@KingdomDTF Im from India, can you suggestion strong liquid?

[@hanzjerichogarabiles5198]

@@KingdomDTF Is it safe to use hot water in the head?

[@pramodgunjal]

So if I clean the print head with your method, (which is far more smarter than anyone out there) I don't have any need to unscrew the print head, take it out and clean it manually?

[@KingdomDTF]

It depends. You will need to take it out at some point if is very clog and you and to un-clog. I will try to have another video showing how you can "bath the printhead".

[@LuisHernandez-km5kl]

Thinking about getting a DTF and I've heard that you're the king. I have a question. Can you use this on things like mugs and other items.

[@KingdomDTF]

So far that I know is for cotton, polyester, blends, spandex, flex, leather. Maybe later they come out with a powder that can be used on mugs and hard surfaces, who knows what they are planning. Not sure if someone has tried it yet.

[@jenniferreyna2424]

@@KingdomDTF I tried it on a tumbler and it worked

[@mistahvsl3993]

What is a tumbler? Can you send me a link?

[@amassindustries2136]

This cleaning is recommended before or after a long break!

[@KingdomDTF]

You can use it every time for regular maintenance, or before you go on vacation so the printhead don't stay with ink in nozzle, or you can do it also when you get back if you like.

[@desiretoholdonto]

@@KingdomDTF may I ask how frequent is regular maintenance? like do you have an estimate of how many print cycle or days?

[@IndianMan007]

Epson L805 also good for DTF or not ?

[@KingdomDTF]

Yes

[@shevawnlane7316]

What about xp 15000

[@KingdomDTF]

xp15000 is not an ecotank, maintenance will be similar but manually.

[@rahulideasetters]

Hi, I am facing a very strange issue. First I was using the Ink Circulation system but always have some issues. Today I removed the ink circulation system, & connect the pipe directly with ink tank. No matter how many head clean or power clean I do. After the first print, my second print has a very thing transparent white layer. Its like printer not sucking white ink. But white ink is full loaded in damper. I think When I do head or Power clean. First print is fine because of the white Ink left in head. Seems its not using/sucking white ink from damper. Now what should I do I changed Ink Cirulation to direct because of this issue Now I am very tired of these things. ANy suggestion?

[@KingdomDTF]

Is the nozzle check coming good for you? Try to elevate the ink tank about 3-4 inches, just put something underneath and remove the rubber caps so air flow better. Also don't forget to shake the white ink. If you have white ink circulation just keep using it, I think is better.

[@westcoastdisenografico488]

GOOD AFTERNOON I ORDER ONE OF YOUR PRINTERS LAST NIGTH AND I HAVENT GET THE TRACKING NUMBER

[@KingdomDTF]

First we need a form signed by you and return it, we send to your email. Once is ship out you get a notification with tracking number.

[@westcoastdisenografico488]

I havent receved anything to my email the only thing I got is the order number

[@westcoastdisenografico488]

Ive been trying to in touch with you guys

[@KingdomDTF]

Send us an email with order number so we can check.

[@leviteapparel]

Best trouble shooting ever!!!!!

[@KingdomDTF]

Thanks

[@benx104]

They don't make empty cartridges for every printer, like the ET 2720, so vids like this are useless to many.

[@KingdomDTF]

This video is not for the ET 2720, is for L1800