Kioti CK 10 New Owner Overview

[@ymat5306]

Excellent overview and honest assessment! Thanks for the detailed information.

[@LameWolff]

A+ for the bucket safety which go's for any raised implement. It's unbelievable how many videos I've watched over the last couple of weeks of people exposing themselves to raised implement. Very informative video.

[@thedude4632]

If I lived in your area I’d do business with you , your friendly attitude and open manner is great . That’s not so much here . I’ve been shopping for a compact all but one dealer acts as if they are uninterested or they’re doing me a favor if I buy . Finally found a kioti dealer in linn mo who has your attitude , I’m buying from him. To me a 23000$ purchase is significant , one really shouldn’t spend there money with those that have that attitude. Yours is spot on ! Watch ya quite a bit

[@LSE_TRACTOR]

Dude, Thank you for the kind words. I am familiar with your dealer in Linn. Good people. Congratulations and welcome to the Pack!

[@johncware66]

Great video. Would love a similar walk thru of the grease zerk locations, and the spots that should be hit with a spray of dry-grease, WD40 or whatever lube you recommend for those friction points that don't have grease zerks.

[@ryankc9oza118]

Thanks for info. Just purchased my ck2610 from your north store. Kirk was great to deal with. It was definitely worth the drive from Illinois

[@stenny1970]

How do you like it >

[@ronpage101]

You need to make more videos for the CK2610. Cab model too please. Your videos are by far the most informative out there. Thank you.

[@HometownAcres]

Thanks a bunch. Biggest thing I’ve been doing wrong on my ck3510 was leaving it in 4 wheel drive. I’m about to do the first 50 hour service and it hasn’t been out of 4 wheel drive since I got it. That will change!

[@LloydJarvis]

I did the same thing, leaving it in 4 wheel drive. Just did my 50 hour service.

[@1guyin10]

Great video. You wouldn't believe how many times I have had the RPM argument. Some people just can't grasp that an engine is designed to run at a certain rpm. The cooling system, the bearing tolerances, everything is designed for it to operate at that rpm for the life of the tractor. As long as you keep it maintained and don't do stupid things with it you will see a long life out of it.

[@anewrnn]

All the regen machines need to run at higher rpm. I prefer the def and wish a quality company like kioti would make some as an option.

[@AB-ft7gg]

Just bought the CK3510. Watched a lot of your videos before making my decision. Thanks!

[@LSE_TRACTOR]

Welcome to the Pack

[@semco72057]

I like the presentation you gave on how to use that tractor and it is too bad that most dealers don't have sales people who will do that. The driver who delivered my first tractor was the one who told me how to use it, and when I got my second one from the same dealership there was no one to show me how to use it. If I lived in your area in Tennessee and was looking for a tractor I would be looking the Kioti brand and probably end up buying from you all just because of the time spent giving instructions on things most people don't know about.

[@LSE_TRACTOR]

Sidney, what a kind thing to say. Thank you

[@anewrnn]

Hi Sidney. I see you posting on most of the compact tractor vids. You truly appreciate them as do I.

[@semco72057]

@@anewrnn Yes, I have loved tractors since I worked for one man who had a new Massey Ferguson in 1965 and I got to operate it regularly. I had to wait until 2002 to buy my first one though and it and the second one I have works just fine.

[@anewrnn]

@@semco72057 did you buy Massey's?

[@semco72057]

@@anewrnn I purchased John Deere's since their dealership was the closet to where I live and had a good reputation. The Massey Ferguson dealerships in my region shut down a long time ago.

[@lucrioux3976]

God damn what a good salesman. I just bought one and I whis I'd bought from him.

[@pohbor5788]

Great video and even greater dealership!!!! Love our CK4010.

[@michaelmactavish1728]

kiotis and kubotas,stihls are the 3 best products and cheapest on the markets thats why im for all 3

[@mid-hudsontoolworks2022]

Hey Mike, thanks for the awesome videos. Wish you were closer to NY as I'm in the market for a 3510SE. Seems like your dealer is head and shoulders above many of the other dealers around. Very informative videos and their a pleasure to watch.

[@LSE_TRACTOR]

Wow. Thank you Mid.

[@terryherrera5252]

Wish you were my Dealer !!!

[@bobcole9274]

the only thing you might add whan going over the controls like 4 wh and dif lock is the small speed control for lowering smoothly. I have showed that to many people after watching them crash things down. Good videos. I have a 3510 and it starts in the shop at -30 f

[@LSE_TRACTOR]

Bob, You are correct! The MLS valve. I need to mention that. It controls the speed of decent of the 3-point system.

[@FYMM69]

Excellent info. Thank you for your time and knowledge shared

[@richardpoe2461]

You do a great job with your videos. I enjoy watching them!

[@LSE_TRACTOR]

Thank you Richard. That means a lot to me

[@richardpoe2461]

Does Titan paint implements in Kioti orange for you? Or for all dealers?

[@LSE_TRACTOR]

@@richardpoe2461 Titan offers most of their products in Green, Blue, Yellow, Gray, Red, and beautiful Orange.

[@richardpoe2461]

I know they paint in different colors. I wish they did some videos to give us all an idea of all that they have to offer.

[@steven8735]

I have a 2018 kioti ck2610 I just put over 1000 hours on it Only thing I have done to it is change Motor oil And transmission and front end oh no I have not done anything to it I like the tractor very much I bought it new in New Hampshire

[@zimzim2160]

Thanks Mike I'm so very pleased with my 2610 purchase. You guys have been great. Cool to see a video with post sale tips..Rob in N Georgia.

[@LSE_TRACTOR]

Thank you Zim!

[@stevenmichaud8733]

you guys should do video's on 50 hour servicing, starting with the 2020 ck3510ch se ?? lol

[@neilfigueredo7041]

Great instructions!!

[@SB-dw6hz]

Great video! Hope you do one of these for the RX

[@LSE_TRACTOR]

S B, thank you! I’ll do the RX next! If the weather is good, I’ll do it Monday

[@SB-dw6hz]

@@LSE_TRACTOR thanks!

[@crabmanbc21]

Great video, Thank you

[@davidlibby7230]

Thank You!!

[@stevenmichaud8733]

Also showing all the greasing points

[@jbt308]

Love your guys' videos, wish you were selling down here in Florida!

[@LSE_TRACTOR]

We sell lots of folks in The Sunshine State!

[@LSE_TRACTOR]

jbt308 can you email me at [e-mail]?

[@jbt308]

@@LSE_TRACTOR Thanks Mike, email sent!

[@robpond7385]

ty larry

[@sgtbigtoe7640]

Love my 2510👍

[@gemgroups9806]

I would like to see this up and curl and dump and roll at the same time, the sticker shows it does such but when I tested, it really doesn’t (unless you have feather hands with tricking the control valve). Please tell Kioti this is a control valve issue and fix it so I can buy the new model!

[@odinboggs4372]

I wanted the 4210 cab...till I seen the backhoe break the frame 😳 and Kioti didn't cover it.

[@TheAussieincalgary]

Very good info and safety advice. I'm in Canada, but have enjoyed your videos for a couple of years (plan to get a tractor later this year) as I have been researching several brands (and have gone to the different dealers) initially was looking at the CS sized tractors (1025r, Bx23/2680 etc, Mahindra, New Holland), but with our bushland hilly 3 acres am thinking CK2510 (2025r, B2601 etc) is better. I was leaning towards the 2025r, but wih the new CX2510 coming out with the side by side pedals (treddle pedals with my big foot and workboots are a huge minus for me) I am seriously thinking of getting one now (part of my 5 year plan on developing our place).

[@FYMM69]

I’m also in Canada and the research I’ve done, although the CK2510 is a great little tractor I’m more interested for the few extra dollars, in the CK2610HST, bring it shares the same frame as the 3510 and 4010.

[@scottbeauchemin1473]

What is a price on a CX2510H loader and backhoe on trailer

[@donnyaldridge6452]

I looked at the Kabota L2501 and the price was insane..I got the actual quote today..I thought the 23,400 was OTD..Nope it was 27,265..Thats HST, quick attach bucket, r4 tires filled with Tax and fees and insurance payments around 454 a month..A bit much I think for around the house. Think I'm gonna look at this Kioti model and Mahindra and do a price compare I was expecting the Kabota to be closer.

[@robertsaenz7194]

Great information

[@wdbldr67]

Maintenance is the key. My dad had a tractor bought new and never in the shop in 11 years. Then sold it to his brother. Well never checked the oils, never greased, and it was toast within 3 years. Spent $$$ for repairs. Learned nothing.

[@hobbithabits2806]

Thanks for the great video! "Real cold... like 10 degrees cold..."! Ha! It's been below zero (fahrenheit) here in WI for a week now... brrrr.

[@Tread70]

I am interested in getting a new tractor in the next year or so. And while watching this video, I do like the options of the Kioti. At the end of the video, you mention about starting the PTO at lower rpm and then demonstrate it. But the drive shaft never turned, was/did something break? I heard a clanging too.

[@turnertruckandtractor]

The drive shaft is moving inside the stationary safety tube.

[@sloppyjoe6243]

The plastic tube should NOT move. It protects the implement drive shaft. There is always that clanking sound of shaft and implement rotating when engaged.

[@dirtnbeer]

GREAT VIDEO! My question is on the CK2610 hydrostat what’s the RPM one should be in when not using the pto? Like when dragging the driveway or moving brush......or does it not matter with that style of motor?

[@LSE_TRACTOR]

Great question! You are correct in that the engine in the CK2610 doesn’t have DPF so RPM’s are not needed for that reason, BUT.....the HST needs RPM’s to operate especially if you are dragging the driveway. The engine that you have in the CK2610 uses so little fuel, that there really is no reason not to run it at full or nearly full RPM’s. That massive HST is a hungry beast. Feed it.

[@MrBowser2012]

Very helpful! I hope you’re getting commission from this video. I live in Idaho so I bought a ck1035 from my local dealer after watching your content. I do have a question. I can’t raise and dump the loader simultaneously. If I’m in the perfect sweet spot I can lower and dump. My dealer said this is normal for these tractors but it may break in so that it will perform 2 functions simultaneously. It’s a brand new tractor in 2021. Have hydraulics changed or should I be able to perform 2 functions at the same time?

[@LSE_TRACTOR]

Thank you for the kind words, Mr. Bowser. Whenever a dealer says, "it may break in", I want you to think of a forked tongued serpent saying, "It is a delicious apple. Take a bite". Clearly, the KL4030 loader is designed to do both operations. As I am certain that you noticed, there is a factory applied sticker on the back end of the right side loader arm. It is a diagram of the operations that are controlled by the loaders joystick. The sticker shows that raise and dump is at the 5:00 O'clock position. I honestly cannot think of a time that a customer has had this issue, but if you are genuinely placing the joystick at 5 O'clock, and it is not performing, you must call the dealer and let him or her know that you are not, in fact, king of the idiots.

[@MrBowser2012]

@@LSE_TRACTOR thank you!

[@willmcmasters4012]

My brand new 2610 blows a lot of blue smoke and runs rough at startup. Is this normal?

[@ladwiss]

Great Video ! My CK 2610 loves You guys, even though I bought it here in Montana. My neighbor has the L3301. I truly believe I made the better choice. Love my Kioti Tractor

[@chevy5515]

Where in Montana did you buy it?

[@ladwiss]

@@chevy5515 Missoula,mt

[@billkrahn3568]

I just made a verbal agreement to buy" the last kite CK2610 in montana" according to the salesman. Are you still happy with your tractor. Im nervous as to buying it sight unseen. Currently have a deere 1025R and am up sizing

[@ladwiss]

@@billkrahn3568 I have 5 acre as and use it for so many things. It has been 100% dependable. It is only 25 HP but I am not pulling a plow or no tilling a farm. It has done everything I asked of it and with counter weight it picks up 1800 pounds at the loader. Would I buy it again under the same conditions YES . Any regrets.. None Keep it inside and take care of it and will treat you right back. Good luck and let me know what you do. Have a great day. Oh I just turned 300 hours and have had it for 2 years

[@MrKen-longrangegrdhogeliminato]

I have a CK 30, are the CK 30 a heavy well made frame?

[@LSE_TRACTOR]

Yes!! The CK30 is every bit as tough as the CK10 that replaced it

[@wyomingliving7454]

Nice work....

[@job38four10]

I have search from here to Timbuctoo and NO ONE NO ONE does a review/walk around like you do here on a CK3510 gear, all I see is the SE-hydro model everywhere by everyone, WHY WHY WHY!!!!!!!!!!!!!!!!!!!!!!!!!? I have a CK 3510 gear coming this week with AG tires so guess I'll have to do my own review/walk around next year..........

[@kaseycasece1340]

YOUNG MAN , EVERY TIME USE YOUR TRACTOR NEED TO BE GREASE

[@farmerfloyd7696]

Witch kioti should I get for tilling and bush hog ??

[@maddawg4599]

buy the biggest that you can afford has always been my train of thought.

[@LloydJarvis]

Is 2400 the operating range for the ck 2510.

[@ProjectWildwood]

Killer video!

[@robinspencer2100]

I have a 3510. What does the dash light mean , when the light and the word cell comes On ?

[@LSE_TRACTOR]

CEL is literally "Check Engine Light"

[@stenny1970]

Larry Stovesand Equipment - What price do you have on a CK2610

[@LSE_TRACTOR]

Dave, Manual transmission or HST? Cab or open station? Email me with your Zip Code, and I will send a quote. [e-mail]

[@mellodhillcountryliving8314]

My dealer I bought my NX5010 from says the hydraulic fluid should be changed along with the filters at 50 hours. Is just changing the filters and engine oil all that is needed.

[@LSE_TRACTOR]

Yes. At 50, just the hydraulic filter or filters. Not the hydraulic oil.

[@devshewitt4809]

Why do class 2610 lights on dash not work like brake 4x4 etc and how do I correct it

[@LSE_TRACTOR]

Kioti uses the same gauge cluster in nearly all models of tractors. The CK2610 does not make use of the majority of lamps that an NX Series, for example does. There is no fixing it, it is designed that way.

[@devshewitt4809]

@@LSE_TRACTOR but the 2610 has 4x4 and parking brake the lamps are on dash but they don’t work with the action

[@donniebargo964]

I would like to have a c k instead of my Cas what is the price difference in the two I don't have a mower with mine I do not want a grass mower I would like to have a 23 to 28 horsepower somewhere in that range in those tractors what is the difference and Wyoming will I have to pay the difference in a trade in

[@mellodhillcountryliving]

At what hour do you change the hydraulic fluid for the first time.

[@LSE_TRACTOR]

400 Hours

[@danb180]

older video, I know. How bout Kioti develop a bluetooth telematic package that sends your phone maintenance reminders at the recommended intervals based on hours and/or usage? Technology is readily available and easily integrated on these modern machines since they are already computerized. I won't charge anyone for this great idea lol

[@LSE_TRACTOR]

It is a great idea. My Ford Ranger has it, and I like it.

[@jasonbork5545]

I purchased my ck3510se from you. My only question is how long will it take for you to open up a dealer in Minnesota. The reason I purchased my tractor for you folks is, there isn't a dealer worth a damn in this state. Of any brand. Only 2 kioti dealers. The closest to me very very small. The other dragged their feet for 3 months on my purchase, so I went to you. That same dealer dragged their feet for 6 weeks on warranty work that shouldn't take longer than 2 weeks. Please open a dealer in Minnesota. Thanks.

[@LSE_TRACTOR]

Jason, I’ve mentioned this before.... it snows up there, yes? I can’t do snow ⛄️

[@jasonbork5545]

You open it, I'll run it, I don't mind the snow. Not to mention, you haven't truly experienced a kioti tractor until you've punched the bucket threw a 2-3 foot snow drift. I would not have made it threw last February with out my ck3510se. Nothing runs like a deer right, except the kioti chasing it down for the kill.

[@LSE_TRACTOR]

@@jasonbork5545 LOL! BTW, why are you awake at 2AM?

[@jasonbork5545]

Just had our 10th child a week ago. And I've been working overnights for the past 14 years. Been out of work since February do to a torn rotator cuff. Should be back to work in another 7 weeks.

[@LSE_TRACTOR]

@@jasonbork5545 Congratulations on the baby! I wish you well with the shoulder, that is a total bummer

[@factfinder4839]

What determines which Oil Wt is optimal?

[@LSE_TRACTOR]

Here is a very brief explanation from Penzoil's website: "Motor oil is measured by its viscosity-basically how thick or thin it is. The higher the viscosity, the slower it flows. All motor oils are given a ratings grade by the Society for Automotive Engineers. An example is 5W30-the “W” stands for winter and the oil’s cold weather rating. The lower the W number, the better the oil will perform in colder temperatures. Typically, a 5W oil is recommended for winter use, but synthetic oils can be formulated to flow even more easily when cold. This way, they are able to pass tests that meet the 0W rating."

[@sloppyjoe6243]

The temperature of the area that you live. If up north, 10w30, down south 15w40. The beginning number (i.e. 10 or 15) is the viscosity at start up and the later (30 or 40) is the viscosity at operating temperature.

[@prowling1]

I purchased a CK 4010 and my ONLY complaint is the parts are super expensive and cant be replaced without taking it to the dealer due to the computer needing to be programed. The injectors are 600+ each and must be programed after install. Super easy to change but stupid expensive!!

[@LSE_TRACTOR]

I assure you you never paid me $600 for an injector.

[@prowling1]

@@LSE_TRACTOR I did not mean that as directed to you and your business. That was meant as a Kioti complaint as to what dealers are charging in Ca. This is an issue I am dealing with today. Sorry for any miscommunication to my original post.

[@PurpleCollarLife]

Why does a HST transmission have a clutch on these Kioti tractors? -Chad #purplecollarlife

[@gemgroups9806]

Usually to disengage the HST and PTO, and also some need them pushed in to start as opposed to placing in N on HST lever. It does come in handy on my other tractor.

[@williamsickner2206]

The grease goes in the zert not on it.

[@CopperCettle]

I have a ck2510 , i know less about maintenance after reading the manual, it don't even give you the correct numbers for the filters, and sure don't tell you which filter is which

[@ramonperezjr7307]

Good morning Mike, hope all is well in the new year. I sent you a price request on email a couple of days ago. We are ready to proceed with a tractor. Thanks.

[@LSE_TRACTOR]

Ramon! Call me at [phone] Our emails have changed. I am now [e-mail]

[@redddbaron]

2400?

[@LSE_TRACTOR]

Yes. 2400

[@elwinsmead5691]

To all potential buyers of Kioti tractors I hope you get a better one than I did because I have had nothing but problems with it and Kioti is doing nothing to make it right and my dealership is not the greatest shall we say

[@LSE_TRACTOR]

Hmmm. Riveting. Did I sell you your tractor?

[@elwinsmead5691]

@@LSE_TRACTOR nope you didn't I bought it I Granville NY

[@LSE_TRACTOR]

@@elwinsmead5691 so you decided to use my format here to share with the viewing public that your dealer sucks. Perhaps you should haunt the dealer that wronged you. I have no dissatisfied customers. I have spent enough time on this.

[@sloppyjoe6243]

I got a good one ;) and luv it!

[@elwinsmead5691]

@@sloppyjoe6243 I am very happy for you may it give you many years of trusted service

[@clintpeterson9028]

Bought and 10 hours all fins broken off water fan

[@clintpeterson9028]

Thay fix no charge

[@mr.redneck2715]

Sorry Larry kiote does not make oil! Any oil that meets the specs will be just fine. the important thing is changing the oil on time.

[@kaseycasece1340]

YOUNG MAN , KUBOTA L - 2501 TRACTOR LOADER , BIGGER FRAME & MORE STABLE THAN KUBOTA COUSIN IS " K I O T I - TRACTOR LOADER

[@williampartin136]

Thanks for all the informative videos! Love my Kioti however I need help with a question.Can you please give your opinion on this engine sound? I have the CK-2610 , 2020 model year with 40 hrs . It is making this very same clacking sound even after its warmed up. Is this normal or do I have an issue? www.tractorbynet.com/forums/threads/normal-engine-noise-or-do-i-have-an-issue.335672/

[@LSE_TRACTOR]

I will talk to my service people. Stand by

[@williampartin136]

@@LSE_TRACTOR Okay will do , Thank you

[@williampartin136]

@@LSE_TRACTOR Hi Mike, Just wondering if you've had a chance to talk to your service people, Thank you

[@LSE_TRACTOR]

@@williampartin136 Hi. I guess it was hard for them to diagnose the sound in this situation. I think that it really must be heard in person

[@williampartin136]

@@LSE_TRACTOR Well thanks anyway,Mike. Just wondered if if sounds normal to you. Keep up the good work helping kioti owners

[@MaineOutdoorsChannel]

Subscribing to this channel is required for Kioti owners

[@kaseycasece1340]

YOUNG MAN , SHELL ROTELL 15 - 40 DIESEL OIL / KUBOTA OR DONALDSON FILTERS

[@swamprat69er]

My 2012 CK27hst has a grass burner exhaust on it. (Exhaust comes out at the front left corner when you are sitting in the seat). I want to change it to a straight pipe going straight up through the hood. What damage am I going to do to the engine? To the best of my knowledge, there is no pollution crap on it.