KIOTI DIY SERVICING. WHAT'S INVOLVED?

[@brianrice6993]

You know what would be great? since you are the largest Kioti dealer in the country. Set up a online parts department that is easy to use and find parts. I’m a hour away from my dealer and I’d order all my filters from you if the price was right.

[@LSE_TRACTOR]

Brian, it's on my short term bucket list.

[@joeorsborn9794]

I agree with Brian,great idea.

[@scottmoorhouse5664]

ME THREE!!!

[@DMHRC]

That would be great, my DK is awesome but my dealer hasn't been the most helpful

[@jonathanwharton5837]

Kioti parts are ridiculous to figure out. I hate that there isn't an online vendor with direct shipping.

[@danlittle1021]

By far the best Kioti maintenance video i have found on KZbin. Thankyou from New Zealand.

[@grandpa7278]

Thankyou, I've saved this video for the future needs! My Story- I bought a new DK4720 and 6ft Brush hog, took it in for 1st service, was to be acouple day's. I got the call, a hydraulic leak deep in the tractor, they had to split the tractor, took 2 months due to getting parts. Attention all, if your new tractor is split in half, DON'T go there and see that! It's traumatizing

[@tommykiser5299]

Thank you for emphasizing the mechanical locks on the loader cylinders!!! I see so many people doing KZbin videos about servicing their tractor without locking the loader up. Great video!

[@gentrydebbie1040]

I Bought a New CK 3510 Shuttle 3/22/2022 and it will be delivered in a couple days . I have owned Two Mahrinda's and Decided to Go with Kioti The Seat and Ground clearance Pump Rate made my decision, I hope my Dealer is Reliable , Thanks For The Video and Info ? Thanks for The Lift Iron Locks I would never get under a car without Jack stands so I learned something new i had not Thought about.

[@mikepo182]

This is Mike's. You Touch. You DIE! That was a great one!!!!!!!!!!!!!!!!!!!! LOVE it.

[@stevek6921]

Gave me a chuckle too!

[@davidmaxwell7275]

Hi Larry, Thanks very much for taking the time and effort to produce this video, apart from being very well presented and very interesting your explanations as to how and why things need to be done and helpful suggestions ( paint on dipsticks) adds to my knowledge and understanding, It also reduces the amount of angst when undertaking a DIY service and the concerns of am I doing this correctly, which by and large I have been, it just reduces the worry. I think the information provided in the Owner’s manual is of great assistance, in encouraging owners to do the services themselves. As you know full well moving a tractor off property creates it’s own set of costs & difficulties which I want to keep to a minimum. Apart from the initial 50 & 100 hour services, which I watched the mechanic conduct, on our now 10 year old CK35 I have undertaken all of the services myself, I am currently working my way through the 400 hour service at the moment. Please keep producing your videos I subscribed awhile back and have enjoyed watching each one, thanks again keep up the great work, looking forward to your next video, when you have the time. Best regards David Maxwell, 345 Gordon Mount Egerton Road Mount Egerton, Victoria 3352, Australia.

[@silverrussell1978]

The only different advice I would give is to use a grease with moly in it. I also highly recommend the "lock-n-lube" which makes life easier.

[@itmagic4377]

Thank you Sir! Very helpful and detailed instructions to keep the machines in great shape! Fantastic!

[@kurtkovich1359]

Good video. I just did the 50-hour service on my DK5310SE. Pretty straightforward. The trickiest part was the hydraulic filter. More hydraulic fluid came out than I expected. There's a magnet on the tractor filter stem (to catch little bits of metal in the fluid), but the magnet can make it a little tricky getting the filter off quickly without having fluid come out.

[@LSE_TRACTOR]

All true Kurt

[@jakeMTSU]

I bought a ck3510 from you guys, just recently.. so far so good (CS wise), I would like to just thank you for taking the time to make these... I got some smack talk buying a Kioti over a the other one lol... I hope with knowledge and time I can show people your product and service make just as good if not better.... thanks again.

[@LSE_TRACTOR]

Thank you Jake!

[@DH-ik1vf]

Great video! Thanks for putting this together. You clearly care more about your customers than the nominal profits of pushing all service to your stores. I have a question about checking fluid levels. For example, do i screw the stick/cap back in to the front axle to check or just stick it back in the hole and check without screwing it down? Same questions for the hydraulic fluid in the back? Push the dip stick al of the way in or just touch the opening?

[@LSE_TRACTOR]

Thanks DH! Yes, reinsert and seat the dipsticks when checking.

[@rodneysr.4175]

Mike you're the man. Great job my friend.

[@LSE_TRACTOR]

Thank you Rodney, but in fact, YOU Sir are the man!

[@clevelandbrowns3325]

Excellent video. Well done.

[@nickf8028]

Bought a CK3510SE last month, managed to do the 50 hour service myself. Had to call my dealer and get a quick walkthrough on the bleed bolt/fuel filter but that's about as complicated as it got for my machine.

[@whatwevefound7769]

Great video, very informative. We've got a DK5810 HST on order, and your video has assured me that I will be able to carry out all the general maintenance tasks and checks. Thank you very much 😊

[@SpeedyCotton55]

I should have my CK2610 in about a week. I'm in Texas but if I move, I will look for a place near you guys. Great video and thanks.

[@APBT-Bandog]

Thanks for your videos. Even though I didn't get my Kioti tractor from your dealership due to my location, I do buy all my parts from your stores as a way of saying thank you for your videos.

[@LSE_TRACTOR]

Thank you K9! That means a lot to me.

[@APBT-Bandog]

@@LSE_TRACTOR got my 50 hour service supplies some time ago, my 400 hour service supplies for the future, a replacement fuel tank after busting the original (my fault), and the Kioti 3rd function kit. Your parts department team is always very helpful and professional.

[@JMN45]

Good video Mike. Your phone issues are a bit frustrating though. Many times I get "sorry your call can't be completed", or "the person you're trying to reach is unavailable", after one ring. Called 4x this past week and couldn't get through. Fortunately I had Thomas's cell and he helped out. I have a 20 year old DK 35, bought new from Charlie's Red Barn, with backhoe attachment (PTO driven) and I've beaten it to death. A little over 1000 hours and it keeps on keeping on. I've dug over 150 house and home addition footings with it and never found any soil/clay/rock it couldn't handle, and luckily with no mechanical issues. I once pulled a 7'x5'x12" stone out of a dig with it in Hendersonville. Couldn't believe it. The only real complaint is the seat quality, both on the tractor and backhoe. They quickly split and virtually shredded into pieces. I have yet to find a good replacement that doesn't cost a fortune. And the backhoe seat doesn't tilt forward which would greatly help when putting the backhoe on. Great machine overall though

[@tfrantastic]

This video was great. I’m excited to see if there is the same video for the CS2220>

[@JoeTheFarmer]

Mike, serious question. How do you recommend checking tire pressure in tires loaded with rim guard? Just be sure that the valve is at the top when checking? Should the pressure be the same with the rim guard in the tire? Great video. Thanks!!!

[@LSE_TRACTOR]

Correct on all counts!

[@BigTader]

Will you do a maintenance video on the TYM Tractors? I really enjoy your videos they are always helpful. Thank you and May God bless you.

[@averagejoe-kx4sb]

Excellent video thanks

[@martybertrand5119]

Another great video

[@zsoltkarner2698]

Awesome !!!! Thanks !

[@ianchamberlain6028]

Very very helpful thank you!

[@gregmercer5249]

Great job ! Would love to see a fuel filter change on the DK4210se

[@colin6819]

Very informative! Appreciate your efforts. I've a question, What is the draw-bar used for? The hole seems too big for a tow-ball and I've yet to see a useful purpose. Perhaps a future video?

[@bobpurs]

Good video Mike.

[@richardpoe2461]

There is a handy tool for cleaning the radiator and cooler is called a radiator Genie.

[@jg6438]

Can you please explain how to adjust the pins on the belly mower for different cut heights? There is a method after lowering the deck to place a height pin in the hole as marked on the mower deck then another pin goes eighter top or bottom and then every time you lower the 3 point lever it deck will always stop at the same cut even if the 3 point lever is moved full forward. Lift arms still operate full range just the deck will stop at same place. Handy with roto tiller to engage soil yet keep the deck from plowing thru the tilled soil. JR

[@q8fly.]

Help needed. I bought a 2022 dk5010. But I can't figure out where the clutch house water drain. I would like to check if there is any water. I use it for loading jet skis

[@bruceriege7478]

i didnt anything about the fiel filter i own a cs2510 2021 love it loader and mower package also purchased 5ft box scaper

[@ronmilam1331]

Hey there Mike!! Could you tell me the torque setting for the loader mounting brackets on the CK 2610? Stopped by your shop today and picked up a 50hour kit, missed seeing you there. Anyway, love our CK2610. Thanks

[@jamescook9327]

See video at 19:20

[@ChuckNorris-ju5fn]

thank for the video

[@suny6pak]

Thanks for the video. I spent an hour looking through my manual to find out where to check and fill the hydraulic oil. Never did find it. I assumed it was where you should me but i wanted to make sure. Why the hell isn't it in the manual?

[@jimmysdrakas6151]

Hey Larry, wish all dealers were as good as you are. Had a quick question on my DK4710SE. Just want to confirm there is only 1 air filter. I had a green tractor before and it had an internal secondary filter but my kioti only came with 1. Thanks

[@LSE_TRACTOR]

Thank you for the kind words! It has a single cylinder Donaldson air filter.

[@BuzzJones]

When is the FIRST Hydraulic Fluid change on a new DK10SE HST Tractor ??

[@LSE_TRACTOR]

@@BuzzJones a filter change at 50 hours and a flush and filter every 250 hours after that

[@Internet_Gangsta]

So I did 50 hour maintenance myself on CS2520 and tractor seems noticeable slower in the low gear. Actually reverse gear seems just as fast and high gear seems fast but I never use it so can't properly judge. Low gear however is clearly slower. I can even tell by mowing times. Could quality/difference of hydraulic/trans oil affect that? I purchased all filters from local Kioti dealership.

[@redpoole9323]

Do you recommend Kioti Filters or something equivalent

[@dustinlee8389]

Hey Mike where can we find that hat?

[@melaniekeen3611]

Maintenance is a ongoing process! Neglect=issues

[@alexnicholson4304]

Is Kioti brand oil synthetic or conventional? Thanks

[@jimhenderson4169]

Dealer I purchased my kioti DK4720HSE quoted 1000 dollars for 50 hour service.which includes motor oil and filter,hydraulic filter, HST filter.I can do myself but really wanted to use dealership service. But this seems high just asking for second opinion.thanks

[@LSE_TRACTOR]

The DK10-SE is one of the higher priced 50 hour services, due to a particularly expensive HST filter, but..MY GOD MAN! A 50 hour kit (you do the work) is $180.00. A 50 hour kit and service (we do the work) is $300.00.

[@DP-ke3vf]

Can you buy the loader safety bars or do you make them out of sections of angle iron?

[@LSE_TRACTOR]

It’s just scrap iron

[@DP-ke3vf]

@@LSE_TRACTOR thanks for the quick reply!!!

[@DH-ik1vf]

Do you have to drain all of the hydraulic fluid in order to change the two HST filters? If so, should it be replaced with new fluid or can the old fluid be place back in? 11 gallons is a lot to manage.

[@LSE_TRACTOR]

Excellent question DH. You will not change the UTF during the filter change. There will be fluid loss as you quickly swap each filter, but it’s not as bad as you might expect. Make certain all hydraulic systems are down, loader, 3 point, etc, so that the system is not under pressure. Expect a loss of about a pint per filter.

[@ronswanson1996]

It has been suggested to me to drain (and replace) front axle and hydraulic/transmission oil when replacing the filters at the 50 hr service. I believe manual suggests that those fluids can be drained and replaced at 400 hrs however (motor oil and filter replaced at 50 hrs). Is this suggestion legitimate?

[@LSE_TRACTOR]

Ron, I think that you should follow the manual.

[@ervinbrew]

Great vid, thanks. I need to do the 50 hour on my nx45. The dealer service dept insinuated that it's better (important) for warranty to let them do it. I don't remember his exact words. What do you think about that?

[@LSE_TRACTOR]

If your dealer makes that claim based on “being better for warranty” he or she is not being accurate. If the dealer says that it’s better because they are more experienced and it eliminates you having to do it, that is something to consider. I own a CK3510SE Cab, and I do my own maintenance. Keep in mind that I own two Kioti dealerships, and yet I do my own. It’s that easy to do.

[@ervinbrew]

@@LSE_TRACTOR thank you sir. I feel very confident I can do it also.

[@kevinnewell5653]

I would like to know are the motors sleeved

[@matthalsey387]

I have just bought a CS2520 and I have 6 hrs on it. Where do I get the steel brackets to keep the loader up? Is this a special steel or would hardware store channel steel do the job?

[@LSE_TRACTOR]

Those are just scrap angled steel that we cut to size.

[@MarkSmith-ut2eu]

Do you have any of the PX series Tractors in stock?

[@mikepo182]

Who else saw it?

[@VolgClawtooth]

My wife wants to know where your file holder on your desk came from

[@LSE_TRACTOR]

Amazon! I believe it’s called a fan file

[@CentralNH]

My dealer doesn't sell kioti oils.

[@arnejahr3531]

How many tractors do you have in stocks

[@arnejahr3531]

Is that both stores