How to Perform Maintenance on Kioti CK2610

[@paulsloan4725]

This was great and very helpfull just got a new Kioti and its comming up on its fiffty hrs .Thanks.

[@johnhall2939]

thanks for the grease points. I couldn't find the one on the front axle.

[@biglarge9418]

Yes please, show the entire 50 hr. maintenance video. It’s such an important break in period and seems quite complex. Would totally love to see someone else do it first.

[@SpicerDesignsLLC]

I should have the second video done in the next week or two with the rest of the break in service . Thanks for watching

[@donaldbrinkman8209]

Good video, I do all my own maintenance also. My dealer filled the rears on my CK2610 with bio ballast for traction while snowblowing and to offset heavy loads in the loader bucket.

[@SpicerDesignsLLC]

Ive thought about doing that. Im just nervous about the extra wait tearing up the lawn. Im sure it works great though.

[@KC-jq9kw]

Thank you. It has been 30 years since I have owned a tractor and farmed. I was in the Amy, so I am just getting back into things. Backing up a trailer on my truck was the hardest until I just put it on there and practiced some with my 16 ft trailer. I just have the standard shift 2510. I couldn't get the HST because the pedals are too close and my leg won't bend that far. It is all tore up, 5 knee replacements, 9 operations, and just works kind or weird. The standard shift is just fine though. I am going to put on a rear camera though, because my neck is fused, and I can't see behind me.

[@SpicerDesignsLLC]

Well the camera should help out with that. I hope the tractor is making things easier for you. Im guessing you meant to say you were in the Army. Thanks for your service.

[@rosarioroberto5823]

Greetings Fantastic detailed video 🇺🇸🍾🎉🇺🇸 Keep producing more maintenance videos.

[@stole1980]

There is a grease point under the tractor located on the position control lever shaft for the three point hitch. Section 7-22 of the user manual has a illustration of it.

[@SpicerDesignsLLC]

I saw that in the manual, but when I looked for it, it wasn't there. Im guessing they removed it and never updated the manual.

[@stole1980]

@@SpicerDesignsLLC yeah, you have to access it from underneath the tractor. I plan on putting an extension on mine so I can access it by the tool box at the back of the tractor.

[@stole1980]

@@freedomfilledlife That’s all I could find on the 2020 model I have.

[@SteveSnowman]

Yep

[@hav1byte]

great video, do you have one on changing all the other filters? i'll look, cheers

[@SpicerDesignsLLC]

I dont but i can put one together here in the near future. Its due for another service.

[@tannersorensen6394]

@spicerdesignsllc Did you get a chance to ever post this video?

[@madtater5948]

thanks for sharing the video, I just did the 50-hour oil change on my new kioti 7320., my tractor came with 1 air filter, I operate my tractor in a really dusty environment, so I ordered this secondary air filter that fits in the OEM housing.. you might want to do the same its cheap insurance,

[@SpicerDesignsLLC]

Good call. I will check into that secondary filter. Thanks

[@robinnorman1170]

Is the orange cap on the side of engine behind loader cylinder above the dipstick also an oil fill?

[@SpicerDesignsLLC]

The orange cap on the side is also an oil fill. it does not reference it at all in the manual. I had to find that online. I was unaware that it was an oil fill so thanks for asking about it. will make it easier for the next oil change. thanks for watching

[@delcallman5525]

Helpful video. What did you use for coolant?

[@skiffintherift9179]

4 inch pvc or something similar cut in 1/2 makes the oil filter swap clean n easy

[@SpicerDesignsLLC]

Good idea. Thank you

[@jentrevorpitts323]

also does that grease gun just click on and stay or do you have to push and hold?

[@SpicerDesignsLLC]

You have to push and hold but i believe there is a lock button to lock in the on position. Ill check for you later

[@Hamburgerhackr]

Check all the bolts on the loader and the doors, on mine, at 50 hours, things started loosing up.

[@SpicerDesignsLLC]

Good to know. I will definitely check them. Thank you

[@dirtyrotter4057]

I've got 13 acres of woodland. In your opinion is the 2610 tractor enough ?

[@SpicerDesignsLLC]

I would say yes. I recently discovered the 2610 is a detuned 35 hp for emissions. I confirmed that with the dealer. There are a couple videos floating around that show how to retune it to 35hp. Im still researching it but i will make a video when i do it. Hope that helps.

[@robpond7385]

Ty

[@davidshay4773]

Another oil fill is above the fuel pump

[@SpicerDesignsLLC]

Ya I finally found that one. Thanks

[@SpicerDesignsLLC]

Yes, I didn't realize it until I was done filling and it didn't show that option fill point in the manual. But yes you could use the fill on the side instead of crawling under the hood. Thanks for watching!

[@robinnorman1170]

Can you fill the oil thru the dipstick?

[@SpicerDesignsLLC]

probably not practical or recommend. good catch on the orange fill cap though!

[@snapcrack55]

1/2" or 3/4" torque wrench drive?

[@SpicerDesignsLLC]

I used a 1/2 drive

[@jentrevorpitts323]

curious what torque wrench model you have

[@SpicerDesignsLLC]

Its a Neiko Pro . I put a link in the video description for you if you want to check it out. its a cheaper torque wrench I use occasionally for lug nuts. Its pretty nice.

[@lukeharmer1585]

What type of grease do you use?

[@SpicerDesignsLLC]

I just use all purpose grease from tractor supply.

[@JFAM077]

How do you keep that thing so clean?

[@SpicerDesignsLLC]

I keep the wifes credit card active and she keeps the tractor clean.

[@JFAM077]

@@SpicerDesignsLLC 🤣💪🏽

[@tripleggee68]

What do you plan on using the third function for? Grapple? Looks like a great tractor, mine comes Friday 👍

[@SpicerDesignsLLC]

I'm really liking the tractor. I had a John Deere 1025r before that I used on an acre and a half. recently built on 10 acres and had to upgrade to something larger. very happy with the Kioti. my plan was to use the 3rd function for snow blade. my driveway is about 1200' long. problem now is i can't find one in stock.

[@SpicerDesignsLLC]

That would be nice to have. I made it through this winter but I need to figure out a better way for next winter.

[@HDSlover1967]

quick question.... How do you take the battery out of the chassis

[@HDSlover1967]

Ignore this question...... it is 2 simple screws. at first glance, I thought I had to take the hood latch mechanism out, it made no sense....... So far 100hrs later, I love my Kioti CK2610HB; my best purchase in years. I move a lot of wood and dirt, it has saved my back.

[@SpicerDesignsLLC]

I would have answered it. I just saw it and you already figured it out. I love my Kioti. No issues at all after 300 hours.