Kioti NX May 2019 from America's Largest Selling Kioti Dealer

PLEASE USE OUR NEW WEBSITE ADDRESS! Check us out at www.LSETractor.com. Email us at [e-mail]. PLEASE SUBSCRIBE & HIT THE NOTIFY BELL! Larry Stovesand Equipment is America's Largest Selling Kioti Dealer, and Tennessee's only Premier 5-PAW Dealer. With 2 stores in Nashville, we want to help inform folks about our products, and answer any questions that you may have. You can call us at 615-956-0334, or find us on the web at www.KiotiSales.com.

[@tquick648]

Mike , you make fantastic detailed videos!

[@LSE_TRACTOR]

Thanks Todd.

[@ervinbrew]

Thanks for the video! Are there any changes between this and the 2021 models?

[@jmrarick]

Love the detailed video. Please work on the audio for future videos. The audio was really hard to hear with my laptop speakers turned all the way up.

[@robadam5842]

Congrats on the expansion Mike. I know its not magic. Hard work and determination.......Your loyal customer and friend Rob in N Georgia.

[@LSE_TRACTOR]

Thank you Rob!

[@seather863]

I also like the fact that Kioti provides protection for the tire valve stems, a lot of other brands stick out and can get torn off in the woods.

[@LSE_TRACTOR]

You have a keen eye

[@seather863]

@@LSE_TRACTOR All the small details on the Kioti's keep adding up to alot of value.

[@KrazyKajun602]

I recently sold my Kioti ck30, looking for a detailed video on the NX5510

[@stevenmichaud8733]

Mike , i have the 2020 ck3510 se cab, like the one in the middle, i want 2 install flush mount led strobes, on the black part of the top, just below the orange part of the roof, am i able 2 screw into that black section, to install those lights ? i would guess that is the air duct for heat and AC, planning on going into it about 1/2 inch . is that safe ? if i just penetrate 1/2 inch into it

[@311hitwall]

The kioti has a DPF and an EGR system? What about a catalyst? On the 5510 and 6010 they have 17.5 tires? Are they just wider or are they also a larger diameter? Seems like those hydraulic lines next to the front tire are just begging for something to grab them.

[@tfisadog5260]

I am from Iowa and I called you a couple weeks ago about the 4210se and where the joystick was located and moving it. It could happen but its not and you suggested looking at the NX 4510 Well i have watched this video and one other video on the NX 4510 a dozen times and drove to Illinois yesterday to drive a used on on a farm that the dealer knew. Well because of your suggestion, your videos, the kindness of Cole Implement Media Illinois and my dealer I have ordered an NX 4510. Lets hope I get over 4000 hours out of it like I did my New Holland. Thank You for your Kindness, Input and Videos. Bob

[@LSE_TRACTOR]

I remember the conversation. Welcome to the Pack!

[@yellowmetaldriver1460]

Does the kioti hst reaction dial actually change the depth of engagement for the HST pedal on the new models or only how quick it moved thru the range once engaged? I understand they went to a solenoid HST in the last year or two and the pedal has a totally different feel from direct link HST pedals. The local dealer here had no clue other than saying all tractors were like that which its not. There was no engagement, forward or reverse, until at least 1/3rd of the pedal was depressed. Does this dial change that so its changes the take-up slop before engagement? Cant find any video or specifics other than mention of the dial but would like to see detailed info on it.

[@311hitwall]

Can the NX lift and dump at the same time? The only loaders i have seen that can do that are the ones that have the loader joystick directly on the valve body.

[@LSE_TRACTOR]

Yes it can

[@311hitwall]

What is they gray canister at 5:56 behind the step? Can you do a video showing side by side the NX tractors with 2 different size rear tires 14.9-24 vs 17.5-24? I wish they would put the larger 12-16.5 on the front.

[@LSE_TRACTOR]

HST oil filter.

[@pohbor5788]

Hi Mike, the next time your doing a video maybe explain how the cruise control works. Is it the same on a CK as it is on the NX here?? THANKS!!!!

[@LSE_TRACTOR]

That’s a good point. Both HST cruise controls are electronic on the CK-10 and the NX, with one difference. The NX has another button with a plus and minus indicator that allows you to increase or decrease speed by tapping it.

[@pohbor5788]

@@LSE_TRACTOR Perfect and it's operation is plenty good for a compact tractor, thanks for the explanation. Does the cruise then shut off with a tap of the brake or hydrostatic pedals?? Or just shutting the cruise button off??

[@LSE_TRACTOR]

@@pohbor5788 Excellent question. Any of those three actions will shut off the cruise. There is no resume feature, though.

[@pohbor5788]

@@LSE_TRACTOR Sounds good for us. Have a great weekend!!!!

[@inezhicks5052]

which model is that smaller tractor closest to the building - to the right of the 5510 at :39 seconds in the video? what it be cheaper to come to tenn from NC and buy a Kioti?

[@LSE_TRACTOR]

That is a CK3510SE with HST. One way to find out, Tell me what you are looking for [e-mail]

[@geezboil]

Does kioti have a true 3rd function valve for its tractor to say to run a grapple, I’m not talking about a detent valve. A 3rd valve will open and close the grapple when u push the button and the loader will go up and down at the same time. A detent valve will open and close grapple when u push the button but the loader won’t go up and down, this what they installed on my 2014 Mahindra 4035. By the way 3 point lifts 3100 pounds on the 4035. I’m thinking it on trading it in for a cab model, maybe leaning towards kioti because of your excellent videos. Your in a class by itself.

[@LSE_TRACTOR]

Thank you Geez! What a nice thing to say. Yes, our 3d Function Systems are electric over hydraulic systems which have a two button selector on the loader joystick. The system utilizes the tractors power beyond which makes it independent, not just tapped into the loader hydraulics.

[@user-oc5je8iu5r]

What them nx 5510 hst going for now if get kkl6010 front end loader and kb2485with the 24 backhoe bucket

[@SJWORGANIZERS]

Could you do a detailed video like this on the new DK10SE tractors?

[@LSE_TRACTOR]

Boss, thank you for the suggestion! Yes I will!

[@davidedwards1479]

You make nice videos. A mic would be nice for consistent volume

[@LSE_TRACTOR]

Thank you David, and you couldn’t be more correct about the microphone. Here is my dilemma: I LOVE, LOVE, LOVE using my iPhone 10 and my Mac. The integration and iMovie software makes it easy. Here is the rub. iPhones no longer have a 3.5 mm port for microphones. Any mics I have tried with a lightning adapter are horrid. Perhaps you or some other kind soul can advise?

[@davidedwards1479]

@@LSE_TRACTOR I cant suggest anything except roll over the iPhone with a Kioti, but thats only because I have an Android and truth be told, half the time I want to drive over it with my truck. LOL! But really, I dont know what type of equipment to suggest, but maybe have camera person become a little more conscious about what you are doing. The low speaking volume was tolerable, but when you fired up that tractor to demonstrate something and mashed the gas, I thought my speakers would pop.

[@zeke1eod]

Quick question, the 70 hp was exploding front axles, burning pumps etc has Kioti fixed these issues??

[@LSE_TRACTOR]

They have isolated the problem and found it only applies to people that ask really stupid questions, such as about “exploding axles”. You know. Folks that are morons.

[@zeke1eod]

@@LSE_TRACTOR I asked a real question, I love kioti tractors I sell them thank u but we don't sell above 50 hp because of the problems I listed, I was not mean nor was I degrading, respecting your wishes posted at top of comment section and you want to cuss me that's real professional. Thanks for being a Jack waggon.

[@LSE_TRACTOR]

zeke1eod you don’t sell above 50 HP? May I assume that you rock out a good 15-20 tractors per year?

[@LSE_TRACTOR]

If you’re curious, 304 year to date.

[@zeke1eod]

@@LSE_TRACTOR Great I hope you sell a thousand! Still doesn't give you the right to act like a horses butt. Best of luck to you and yours

[@ervinbrew]

What is a good brush hog size match for a nx4510?

[@LSE_TRACTOR]

I would use a 6'