Knife FAIL Restoration [Too Much Rust]

This restoration ended before it really started. The old antique knife was just too much rusted, so I couldn't do anything at this point. In some places the old steel broke off and in other places the metal was already so thin that it could not have been used. In this restoration it was planned that the handle should be made of ebony and purple heart and the color on the blade should be extended, furthermore "Forgotten Shine Restoration" should be engraved with a laser.
------------------------------------------------------------
▶ What did I do ?! ◀
In this restoration video I can unfortunately not show many craft processes, only the derusting I show. After that I had to stop the project because the old knife was too damaged by rust. But you can see exactly the derusting and detailed my plan what I wanted to do with the knife.
------------------------------------------------------------
▶ Good to know ◀
I used the following tools: Rust remover, screwdriver, wire brush, sandblasting cabin, abrasive corundum.
------------------------------------------------------------
▶ Special thanks to my channel members! ◀
-
------------------------------------------------------------
▶ Do you want to support me? ◀
Do you want to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you saw and you want to help the channel to develop? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
------------------------------------------------------------
▶ Did you like it? ◀
Did you like the video? Then like, subscribe and share it, please!
Thanks a lot!

[@condar419]

Please tell me you sent the poor old knife to an “Old Knives’ Home”, where he could tell his war stories to discarded butter knives… 🥺

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@ForgottenShineRestoration]

Yes the knife arrived there well and has already moved into its room. I could also observe that it has made first friends. Simply great! 🐢

[@adoptedbythe1king]

Thank you! This is what I needed to hear! 😅

[@silentlight6038]

no he got shattered to pieces and burn ed alive!! !! mw haha haw!!

[@Orangeninja5000]

I love this small thread here, thank you three

[@clayton422]

I think Mr. Turtle knew from the beginning that it was a lost cause.

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@ForgottenShineRestoration]

I'm also starting to think that turtle knows more than all of us?! Why didn't she tell me right away...? 🤔🐢

[@clayton422]

@@ForgottenShineRestoration Please give her my apologies . . . I called her "Mr."

[@ForgottenShineRestoration]

🤣🤣

[@pilledupmind8461]

Love it! It's just reality that things go wrong 🤷🏻‍♀️ still very satisfying and interesting 😌 would love to see just EVERY project of yours whether it goes wrong or turns out beautiful 👏🏻

[@ForgottenShineRestoration]

Thank you for your great comment! 🐢

[@HannahMattox]

Poor little knife. It was very honorable of you to try and save it, but sometimes you just can't do anything more ❤️ I appreciate your efforts, and I think Turtle's heart is a little broken. We gotta get him a new knife project to lift his spirits! ❤️

[@ForgottenShineRestoration]

That's right... turtle has been really sad, but turtle is already better, because we are already soon about the next project...🤩👍🐢

[@HannahMattox]

@@ForgottenShineRestoration yay! 😍😍

[@dasammit]

Sad that the knife was too far gone but it wasn't a failure. I would watch every one of your videos, they are always informative. I love turtle!

[@ForgottenShineRestoration]

Thank you very much! 🤗🐢

[@exilibrius]

🐢

[@Krxo7]

I find it interesting that not only do we see the fail of restoring the knife but we get to see the plan you were having for it. Eventhough it didn't go according to plan, I enjoyed watching the video ✨️

[@ForgottenShineRestoration]

🤩👍🐢

[@Colonel_Bryce]

Love your vids, even these short ones! I’d be interested to see more of these where the object is too far gone.

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@adoptedbythe1king]

Same!

[@Sabinee211]

Too bad it didn’t work! Loved the idea though, hopefully you can do that with another knife :)

[@benyaminlakhi7044]

Hello dear friends, visit my channel, I teach welding

[@ForgottenShineRestoration]

Thank you very much! Yes somehow I owe it to you to carry out my plan on another knife.... 🤔🐢

[@Sabinee211]

@@ForgottenShineRestoration haha you don’t owe me or anyone else anything! (Well maybe you owe turtle something, he does a lot of work for you). Until now I’ve loved every video, short/Iong. As long as you’re happy making it I’ll be happy watching it :)

[@MetalRestorationBho]

These videos are so bingwatchable, also gives me actually alot of inspiration to also learn and perform these kinds of restorations. Very unique and understandable to newbies, thanks

[@ForgottenShineRestoration]

Thank you for your great comment! 🐢

[@lotsoffreetime8392]

At least you've tried everything you can and planned it very carefully but in the end learning from your failures can be helpful for your success you did your best F.S.R. 👍👍👍

[@benyaminlakhi7044]

Hello dear friends, visit my channel, I teach welding

[@ForgottenShineRestoration]

Thank you for your great comment! 🐢🤩

[@nickys9442]

I’ve binge watched all of your videos please keep them coming I love them

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@ikenosis8160]

Loved the little turtle face! 😂🙏🏼

[@benyaminlakhi7044]

Hello dear friends, visit my channel, I teach welding

[@ForgottenShineRestoration]

🤣👍🐢

[@MuscoviteDN]

Badly experience is necessary experience too)

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@ForgottenShineRestoration]

Thats right! Thank you very much! 🤩🐢

[@baragouinify]

I hope you'll be able to find a different knife to complete this type of restoration on, it sounds like it would have been extremely beautiful!

[@ForgottenShineRestoration]

Thank you! 😊 🐢

[@jazzzy2791]

It would’ve been so pretty I hope u find another so u can carry out the idea 🥺🥺

[@fayellaf]

Put it in a simple wooden frame. It would make a great piece of artwork

[@Artemonishee]

Don't give up, make a semi-automatic. Yes, it will take a lot, but try to make a lot. This is what we want to see, this is the whole magic of restoration.

[@restorationofdirty]

Perfect restoration project good 🌟❤

[@ForgottenShineRestoration]

Thank you, bro! 🐢

[@user-yy6zt9jy7f]

2023년에 더욱 더 건강 하시고 많은 행운이 있기를 바랍니다. 멀리 대한민국 🇰🇷 에서 당신을 응원 합니다 👍👍👍👏👏👏💟💚👋👋👋

[@ForgottenShineRestoration]

매우 감사합니다! 내년에도 잘 부탁드립니다! 🥳🐢

[@user-yy6zt9jy7f]

@@ForgottenShineRestoration 😊👏👏👍👍💟💚👋👋👋

[@lilith883]

I really love this channel ❤️

[@ForgottenShineRestoration]

Thank you very much! 🐢 🥰

[@schallkiste82]

Manchmal müssen auch die Besten passen. Mach weiter so. Ich freue mich schon auf das Messer, dass den beschriebenen Anstrich bekommt. ❤

[@schallkiste82]

Also mach weiter so gute Arbeit. Nicht mit Passen 😂

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@ForgottenShineRestoration]

Vielen Dank! Ja irgendwie bin ich es euch schuldig meinen Plan an einem anderen Messer durchzuführen... 🤔🐢

[@Jasm1na47Crnkovic]

@@ForgottenShineRestoration ich frage mich wie alt das Messer ist?🤔

[@user-ce2mf8ok1v]

U are the best ❤️❤️❤️❤️❤️❤️❤️❤️❤️

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@ForgottenShineRestoration]

Thank you very much! 🤩🐢

[@Katyusha_rm]

I find it really intersting to see when the restoration is impossible.

[@Hoyeons7]

i saw your most video and you're already MASTERPIECE Sir! keep it up!^^

[@ForgottenShineRestoration]

🤗🥰🐢 Thank you very much!

[@troll-world179]

Woww, the best!

[@alphagodith3827]

could a knife this far gone be melted down and made into a smaller knife maybe?

[@navinrjohnson33]

I'm just gonna throw it out there, were you thinking that trying to build it up with weld would burn it up? 'Cause that'd be the only other thing you coulda done. I really like seeing the fails, it shows that sometimes, in spite of your best efforts, it don't go your way. Thanks for the video.

[@ForgottenShineRestoration]

Thank you, too! 🐢🤩👍

[@jankokodela3478]

Hiii , I love tour vídeos

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@ForgottenShineRestoration]

Thank you very much! 🐢🤩

[@Artemonishee]

Не бросай, навари Полуавтоматом. Да много придётся очень много, но попробуй наварить. Это и хотим увидеть , в этом вся магия реставрации. Давай, попробуй.👍👍👍👍🛠🔧🙂

[@TheAsvarduilProject]

Can't blame you for noping out of this restoration. As badly gone as that knife is, it might be easier to just reforge it into a new knife made of old metal.

[@adoptedbythe1king]

I am curious what actually happens to the items that can't be restored? Can they be melted down into something else? Turned into eclectic art pieces?

[@ForgottenShineRestoration]

I also don't know what I'm going to do with the old knife yet....🐢

[@cindyandtheharlequins2760]

They could always be sacrificial scrap metal for electrolysis

[@mallyxtheunyielding7212]

Honestly that thing looks like its all rust, I'm amazed you even managed to get any of it off without having it turn to dust

[@ForgottenShineRestoration]

That's right, in the meantime I had the same thoughts....🐢

[@Enfermito]

Yeah, sometimes it could be fail... Because you're not a fake restore tuber!

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@BaracudaTeam]

Im pretty sure this is a central european "bauernwehr" knife. Its from around the 15th c and the best thing you can do is leave it as is.

[@liankaagaeva5317]

За старания и черепашку лайк ♥️🤗

[@ForgottenShineRestoration]

Дякую за чудовий коментар! 🐢

[@magnus0017]

Well, the plan sounds really good, and the kids hope turtle brush feels better.

[@ForgottenShineRestoration]

Turtle is fortunately doing well again.... 🐢

[@Emojibones]

Delicious!

[@ForgottenShineRestoration]

and crunchy 😅🐢

[@erdenerulukan7921]

Matkapa bağlı tel zımpara ile sürtsen rahat başarırsın.

[@feralbluee]

i love it just the way it is. love to mount it on that purple-red wood and hang it in my kitchen. :) 🔪✨

[@justiceisserved3298]

The rust runs deep in this one 😂

[@ForgottenShineRestoration]

😅🐢

[@cesaluiz8326]

wow that knife look like something you pick up shipwreck :)

[@poker783]

خیلی باحال درست میکنی وسایلو

[@daughterofviolence]

I'm sad to hear the news you probably did not have the tools or techniques like welding to give it a better life but I'm glad you tried 😢(love the turtle edit)

[@Qualicabyss]

Yeah repairing this wouldn't be much different from just making a new knife

[@stephenkeefer3436]

Ah ha! Would be fun to slip this into an archeological dig somewhere and let it be “rediscovered “ 😂

[@ForgottenShineRestoration]

😱🤣🤣🤣🐢I imagine it kinda funny too

[@stephenkeefer3436]

@@ForgottenShineRestoration it sure would. They’d get all excited !!

[@1marcelo]

I knew you were going to eat it!

[@Yeen66]

Still restored, just more of a damage over time kinda weapon

[@helmutk.2583]

Entscheidung ist vollkommen okay, was nicht geht, geht nicht. Freue mich aufs nächste Video.

[@ForgottenShineRestoration]

Vielen Dank für dein tolles Kommentar! 🐢

[@sdupre61]

Can old metal like that be melted and forged into something new?

[@ForgottenShineRestoration]

I think so... 🐢

[@kylebryan4504]

Yeah, sometimes a project can be a bust. If you ever need a tool to do a restore on I have an old leather punching?canvas punching tool? It's been in the family for well over a century now and could use a restore.

[@rommyfasha9802]

Forging again from failed restoration

[@Solid_Punch]

You could collect some unsalvagable knives and then make damascus out of them (or make a collab with blacksmith to make damascus), and after that make a knife out of that damascus.

[@danielpearlman3675]

The knife doesn't have to stay the same size or shape. Remove the thinnest parts and make a small blade.

[@martinalbertus1804]

Please, go for the black and purple in another project!

[@ForgottenShineRestoration]

Ok, i will do that 😎👍🐢

[@FelixTheNoodle]

I love how no one is talking about how cursed 3:01 is. Great video regardless.

[@LetsTakeWalk]

Hmmm, maybe try electrolysis next time? That would leave more metal I think. Oh well.

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@ForgottenShineRestoration]

No, that would not have left more metal. The loss during sandblasting is not very high... 🐢

[@LetsTakeWalk]

@@ForgottenShineRestoration Maybe reforging? At least the metal should be usable to make a new knife? (although that might be beyond the scope of restoration)

[@JohnPatersonAu]

You should have made a new one 😅

[@rebekkaholsten4622]

Du hast es zumindest versucht 🤷🏻‍♀️ Dein Plan wird sich sicherlich wann anders verwirklichen lassen 👍

[@ForgottenShineRestoration]

Vielen lieben Dank! Ja das kann ich mir auch vorstellen 😅🐢

[@cabinvibeetsystore9094]

New sub ! Liked 😛🐸🙂

[@ForgottenShineRestoration]

Thank you very much! Welcome on board.🐢

[@ikhsan849]

can you clean the rusty nails?

[@kiiiisu]

ok fine this is too gone! :D

[@tracywren9681]

Your design would have been spectacular, and I'm sorry the knife was in such rough shape.

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@Callmeperson.]

It was a good try

[@WMassMetalDetecting]

I think you could make a steak knife out of that, and you can fill the pits by spot welding I think. But maybe I got the wrong idea.

[@user-zs3ft9oj1b]

I don't think the knife can be repaired because it is very worn and rusty. Therefore, the decision to fail the restoration process is correct and in place

[@ezeerestorations4097]

Some things are just too far gone.

[@nickys9442]

Rip that poor knife

[@maxsc5160]

Porque ganó River

[@nope.0.]

I've seen a video before where they took a discount store knife and upgraded it. Maybe don't let the design go to waste, find the cheapest knife you can and give it a makeover.

[@ForgottenShineRestoration]

mmh good idea 🤔🐢

[@andreasm481]

Oh je. Kann passieren. Manchmal findet man unter Rost eine wundervolle Patina, vor allem bei Messern, andererseits nur Schrott. Nicht verzagen, weitermachen ! Nagle das Ding an die Wand zur Erinnerung und auf zu neuen Projekten ! Kann nur besser werden !

[@ForgottenShineRestoration]

Vielen Dank für das tolle Feedback! 🤩👍🐢

[@pothepandasemporium8616]

4:08 Thing (from Addams Family) wearing a glove 🫳🏼

[@ForgottenShineRestoration]

🤣🤣🤣🐢

[@pothepandasemporium8616]

@@ForgottenShineRestoration Why did you put the Tortoise emoji?

[@qwee7705]

Ещё походит)

[@marlenegutierrezsalazar6002]

Lamentablemente ahora eso es basura ya 😥

[@Chespin_]

Noooo 😟😞😔😥

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@ForgottenShineRestoration]

😪😪🐢

[@zachlewis9751]

Tool just too far gone to restore? Just explain what was the plan for it and make a funny but short video. Definitely a good one

[@cakeman8406]

Poor little knife

[@UserHache]

Oh, demasiado óxido

[@ForgottenShineRestoration]

Oh sí... 🐢

[@turasakecnfg]

İlk

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@user-zs3ft9oj1b]

Hey you, We want a successful restoration Don't be late We are wating⏳⌚👍🇩🇿👍

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@puglife658]

Oh well.

[@benyaminlakhi7044]

Hello dear friend, you are invited to visit my channel. I teach welding. Thank you

[@user-xb6gr8nx9w]

Это был ниндзя-нож. Если им пырнуть врага в спину, то враг скончается в страшных муках от зазубрин и ржавчины. Черепашка-ниндзя не даст соврать.

[@ForgottenShineRestoration]

😅😅🐢

[@rowen1721]

p͓̽r͓̽o͓̽m͓̽o͓̽s͓̽m͓̽ 👍

[@kurumacustombr]

I also do restoration on my channel they are very simple but well done, congratulations on your beautiful work! Eu também faço restauração no meu canal são muito simples mas bem feitas, parabéns pelo seu belo trabalho!

[@WDCallahan]

It's rust all the way down.

[@ForgottenShineRestoration]

You are definitely right! 🐢

[@noodletribunal9793]

i like the camera shots from inside the machines. it reminds me of good eats. have you seen that show? i think youd like it （ ・∀・）

[@FreakBazooka]

More rust than a knife

[@ForgottenShineRestoration]

Thats true! 😅🐢

[@reggintoggaf7140]

Bruh this knife is mud

[@LukasNorris]

You really did a video about this? Now what, 1 more mount until the next one????

[@Cypher791]

😕🔪

[@maxsc5160]

Fant🤢🙏👎

[@OzzyRampage]

You should try to reforge it and make it something usable, poor Old knife😢

[@cryptocommand3752]

Wow, I think I got tetanus by just looking at that.

[@harshaharley6347]

Send me that I restored 😅

[@cevynotter9555]

Unfortunately the rust had already destroyed the knife... so he couldn't destroy it during his "restoration".

[@GoldenAge33]

bad 😡

[@marlenegutierrezsalazar6002]

No