Knife Restoration [Very Rusty Old Bayonet]

An old rusty knife is the object in this restoration video with ASMR. The bayonet was in a very bad condition and I had to do a lot of rework, respectively restoration here. I had to remove rust (with electrolysis), weld, grind, file, drill, polish, turn on the lathe, glue and more.
▬ What did I do ?! ▬▬▬▬▬▬▬▬
The knife was extremely rusty, so I used rust remover and a screwdriver to remove the coarse rust and electrolysis to remove the rest. Subsequently, I welded and ground the very deep pitting. I continued this restoration by hardening the blade and grinding it with sandpaper to 1200 grit and then polishing it. I also had to restore the handle for the most part by welding and grinding it. The new handle scales are made of oak, which were perfectly matched. For this I had to turn small bolts of brass on the lathe. Finally, everything was glued together and the shiny bayonet was ready.
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: pin punch, hammer, rust remover, pliers, welding machine, welding helmet, slag hammer, files, wire brush, propane torch, sandpaper, laboratory power supply, lathe, angle grinder, belt grinder, two-component glue
▬ Special Thanks to my Members! ▬▬▬▬▬▬▬▬
Debora Richards
Zamzuraini Zolkiple
▬ Do you want to support me? ▬▬▬▬▬▬▬▬
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com/donate?hosted_...
or use the following affiliate links:
Material for work:
Laboratory power supply: amzn.to/3wCkan3
Propane Blow Torch: amzn.to/2TGxskB
Rust Remover: amzn.to/33rKF2q
Rust Remover Spray: amzn.to/3ikixH6
Sandpaper - different grit: amzn.to/3haK5hs
Sodium hydrogen carbonate: amzn.to/3xE95Ds
Grinding stone: amzn.to/36uo2vJ
Two components glue: amzn.to/2UKMW7W
Welding machine: amzn.to/3AVs2lN
Belt grinder: amzn.to/3BZxO7b
Equipment:
Camera: amzn.to/3yVUUcD
Lamps: amzn.to/3hikoLo
Battery lamps: amzn.to/2X2yiKK
Microfon: amzn.to/3BU2CFX
Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it! Many Thanks!

[@ForgottenShineRestoration]

Thank you very much for watching! Please subscribe 🥰

[@Norway_ball_ecns]

Yes, subscribe please

[@eggwithaknife6575]

I’m pretty sure that the turtle you had there is of the swimming variety because of its shell

[@ShadowBunnyYoutube]

IM HOLDING YOU HOSTAGE, SUBSCRIBE NOW. 👁👄👁🔫😈

[@Juninn07]

Ai

[@Trix_bm-gc9wb]

wow really begging btw idk how you find rust in this stage like people just let them rust for the vid?

[@tigerlands3107]

Restoration wasn’t really my thing but these videos changed my mind, it’s now one of my fav things to watch!

[@ForgottenShineRestoration]

Thank you very much! 🤗

[@dungeondragon2098]

Tbh same

[@Dev.mp3]

So true

[@toucansam3]

Next, you should try restoring something yourself. I have and its one of the greatest feelings seeing something that looks like junk turned back into a piece of art.

[@BrianMikasa]

Basically you're not into something until you are

[@Discontinued226]

When I’m bored I watch these types of videos and there satisfying to to watch And see how very very old things like this go through restoration and coming out new is pretty cool

[@ForgottenShineRestoration]

🤗🤗

[@md.ddbjhd5906]

wow

[@_se3_thru9h_9]

My girlfriend just asked me why I was looking at a knife. I told her it was because I have an obsession with shiny things. When I looked at the video I was like: “shineeeeee!”

[@ForgottenShineRestoration]

🤣🤣🤣

[@radricdavis8508]

She probably say “it better shine like my future engagement ring ca-Ching!! Spend money and by me a ring you doofus!” Congrats on the wedding

[@Eric.Rose.]

🤣 🤣 For some reason this reminded me of Goblin Master Blacksmith (Bethmoran) from Hellboy.

[@ceutavermelho]

i'm not very good at reading english but it must have been a very good and funny story/tale!

[@albertzooba9025]

Maybe. Your a crow

[@osherzizemski7177]

I don't think it's a bayonet. It doesn't seem to have a mechanism by which you could attach it to a musket or a rifle. It actually looks more like a Bauernwehr knife, and the bit protruding from the side of the guard is called a Nagel (german for "nail"), and as far as I know, was indeed used for hand protection.

[@qwerrweterterhrhry]

You are right, good observation!

[@thecopper-cockmcdickinson8508]

That's true and the guy in the video just ruined it by mutilating the nagel and the blade

[@cynthiacooper8288]

I think it’s important to take a rare tool, car, etc as found with rust and dirt, do the nitty-gritty stuff like chipping and scrubbing the dirt and rust ( as our ancestors did) away rather than going right away to sandblasting. That is why I love your channel so much! Back to the basis. Thanks beautiful jobs

[@ForgottenShineRestoration]

Ok, thank you for your feedback!

[@melodymathilde443]

I always thought that once something was fully covered in rust, it was too damaged to save. Thanks to your channel, I won’t be throwing out old things as soon as I find them

[@Captain4s]

This is the definition of “Trust the process”

[@craigmiesterable]

I think the pitting adds to the overall good look of the knife. Also on a side note, the knife edge can be honed a bit more. Bayonets are piercing weapons. Their knife edge is really sharp. Overall another excellent video from FSR :)

[@Fallwithme]

You go do it then if your gonna hate on their way

[@naikyou]

@@Fallwithme ...that is just normal feedback sandwiched between two compliments. Do you also call it hate when a teacher tells a kid about how their essay could have been better? Or when someone asks for a salt shaker at a restaurant because they prefer a little more seasoning? Or when being asked to comment your Python code better so coworkers have an easier time dealing with it?

[@Ulysses1994XF04]

Not necesarily, the tip of a Mosin-Nagant's bayonet is basically just a flathead screwdriver that you can disassemble the gun with. Not sharp but enough of a point to run it through someone.

[@YukonJack]

@@naikyou great breakdown. Funny how the original comment is seen as "hate". The religion of the time is "praise every thing I do without question, otherwise you're a bigot/hater".

[@CheshireTheMaid]

@@Ulysses1994XF04 is it a Mosin-Nagant bayonet? I can't tell.

[@Buggy_Ari]

Thank you for the awesome video! It's surprising to me that only one edge is sharpened in this bayonet, since two would make more sense for stabbing! But I'm no weapon pro 😅

[@Fatcatmurph]

Restoration is a perfectly valid school of magic!

[@andyollom3831]

I love that you went to the effort of welding low spots higher to TRULY restore the thing. So many channels just try to add a polish to the pitted thing making it look like mirrored swiss cheese! Excellent work!

[@ForgottenShineRestoration]

Thank you very much for your great Feedback! 🐢

[@juupur7914]

You deserve more recognition! Your arts are absolutely stunning. New subscriber. 👍

[@ForgottenShineRestoration]

Thank you very much! Welcome on board 😁😁

[@wavedash9651]

I love these kind of restoration videos, they are intriguing and satisfying

[@inquisitorlord7535]

Mate absolutely love your videos and never cease to be amazed with the end result. Was wondering if you’ve done any work with production of weapons / armours for reenactments? You certainly look very comfortable and skilled. Subscribed!

[@ForgottenShineRestoration]

Thank you very much!

[@darkwolf4049]

I watch these types of videos at night to relax and unwind it helps immensely after a long day

[@HelloAdam_]

Incredible work, that heavy rust removal is so satisfying to watch! 👌🏼

[@gimaiamartinswilfer]

Que incrível!! O seu trabalho é maravilhoso! Amazing! Your work is wonderful! From Brasil! 🙂

[@ForgottenShineRestoration]

Muito obrigado! 😍🐢🐢🤩

[@jwherron]

Great job. I know many hours were spent restoring the bayo. Thank you for the great video.

[@ForgottenShineRestoration]

Thank you very much!

[@annehaight9963]

Nice to see I'm not the only person who uses a screwdriver blade as a rust chisel.

[@ForgottenShineRestoration]

😅🐢

[@davidnelson4960]

Not a bad job. The merge of old and tech was beautiful.

[@wow2]

Отличная работа! Со сваркой по кавернам хорошо получилось. Тем кто минусует - народ, есть вещи которые после чистки или под стекло в музей или в утиль - у многих камрадов предметы в таком состоянии идут в утиль. Тут мастер с говен вытянул вещь с историей и душой. Кухонный, согласен - но я выберу такой а не какой нибудь бергофф. Лайк!

[@ForgottenShineRestoration]

Большое спасибо!

[@layseiiga4246]

Однозначно ...лайк..

[@to1tu_sr7_34b]

" Я выберу такой " А зачем ?На ковер повесить ?

[@user-on3bx3wg5k]

@@to1tu_sr7_34b А хоть бы и так. Вещь с историей.

[@to1tu_sr7_34b]

@@user-on3bx3wg5k кому как. С одной стороны да. С другой. Кухонный ножыг. Какая история ? Я понимаю охотничий нож из шашки. Или меча.

[@survivalaza]

素晴らしい！職人魂を感じる！！

[@richardpawlowski7486]

What a top bloke this guy is, really inspiring stuff.

[@emuwarrior7490]

I liked how it still had some pitting in the blade. Gives character.

[@ddediversion7800]

Muy bueno tus videos y se nota que te lo trabajas bastante, he notado que tu quitas el óxido siempre y pues eso es impresionante, en otros canales no lo hacen y de frente los pintan, la verdad es que eso es un trabajo a la mitad, pero tu lo haces completa y es genial te admiro.

[@ForgottenShineRestoration]

¡Gracias por el lindo comentario!

[@rociobissone8042]

Que trabajo! Quedó genial, muy lindo.

[@matthewnelson5293]

As part of pre-deployment training we had to do a weapons refresher and the entire class was people about to deploy. So the instructor was showing us everything that can be affixed to the end of our M-16s. He showed us a bayonet and told us "If the person in charge says 'You're gonna need this!", Know you are royally screwed. So in that vein, I saw you cut it shorter and immediately thought, "Ah yes, let's make our close combat weapons even shorter! This will only end well..." The restoration looks great, and my bosses have always hated me for being a smart ass!

[@ForgottenShineRestoration]

Somehow you're right, of course, and hopefully no one will ever use it for his real purpose again ...🐢

[@kananoshuru1002]

Restoration seems like the definition of ’Trust the process’

[@Austeration]

Nice work 👍 looks like you might have spent a lot of time on that. Turned out very cool.

[@ForgottenShineRestoration]

That's right, that was a lot of hours of work! Thanks...

[@HannahMattox]

Your channel keeps me company when I'm drinking alone, friend ❤️

[@ForgottenShineRestoration]

Cheers 🥂

[@dhruvverma2000]

Ppl who weld and grind all the pitting r true heros 🙏

[@AsperGoat]

You're one of the few restoration content creator which process doesn't look like bullshit and i absolutely Respect you for it

[@ForgottenShineRestoration]

Thank you! 🐢

[@beneditoaparecidosilva7606]

Parabens!!!! Ficou show seu trabalho!!!!

[@leonardocabrera650]

Increíble transformación de Bayoneta, sos un genio 👏

[@Rascalbeans]

I’m convinced the turtle has been doing more work off camera. He’s too skilled. ❤️

[@goddesslussy8594]

i really love the sounds in your videos and the restoring its the best videos and sounds ive ever seen in my life forever youre the best video maker

[@ForgottenShineRestoration]

Thank you very much! 🤗🐢

[@claudiodias9732]

Very good. Many details were revealed, very inspiring for the recovery of objects considered lost. I've already recovered some pieces, but never from such a bad situation. Thank you very much.

[@ForgottenShineRestoration]

Thank you very much for your great Feedback!

[@wandas9366]

watching cannot be denied. Normally I was supposed to watch, but you can't deny watching it. I RECOMMEND

[@cyanidewerewolf4169]

Ever since I got a recommended video from this channel, I now watch these at bedtime to help me sleep.

[@ForgottenShineRestoration]

Thank you very much! 🐢🤩

[@cyanidewerewolf4169]

@@ForgottenShineRestoration No problem! ^^

[@CatalystRestorations]

Since this is a bayonet, I really would've liked to see you actually test it in ways that put it to a real test at the end instead of just cutting a tomato. Also, what are your (or anyone else's) thoughts on performing so much welding on the blade? At the very least I think you should've normalized the whole blade in a furnace for an hour or two (~900C/1650F) after the welding to get a (more) uniform microstructure prior to your heat treatment, but I understand if you don't have access to equipment like that. I'm afraid that because there's so much welded material on the blade edge that if you ever tried to actually use it for its intended purpose or put it through a 'Forged In Fire' style testing it would shatter pretty quickly or immediately roll an edge. Do you know how old this might be? How'd you come into possession it? Do you have any idea what kind of firearm this would've fit on the end of? I'm always curious of the history and how other restorers wind up in possession of the things they restore! Keep at it! -CR

[@ForgottenShineRestoration]

Thank you for the detailed feedback! Yes, unfortunately I do not yet have such equipment available and yes it is a very difficult issue that the blade is now "destroyed" in the metal structure, but you can always make it up in due course. Unfortunately have no info at all where the bayonet was found or how old it is. I have also searched for a very long time on which weapon this bayonet was once put, but unfortunately I could not find anything at all... I fear soon that it is not from the first or second world war, but for that again condition would be too good, right?

[@CatalystRestorations]

@@ForgottenShineRestoration I'm hopeless on identifying firearms and their accessories, so hopefully another viewer than shed some light on it! But that amount of corrosion is certainly possible if it is indeed from either of the world wars. 80-100+ years of environmental exposure can really take its toll!

[@Restorology]

@@ForgottenShineRestoration Hi. Hopefully you won't be using this blade in the way it was intended (!!) so heat treating it in this case is not so important but if you ever want to do it without a proper oven, you can easily build a homemade forge out of bricks, dirt, hardwood charcoal, and a hair dryer. I build it in a wheelbarrow to move it around! If you want to see it, take a look at how I did it in the axe restoration video on my channel. It's really easy and it worked really well. Cheers!

[@ForgottenShineRestoration]

Thanks for the tip, I'll take a look at that!

[@oncewastrash]

I’m always curious of the history behind pieces as well. What stories could these old items share

[@adamooorobloxnickadam2kdj672]

such things are not cleaned, it is a monument

[@sethv5273]

I’m telling you this guy is secretly amassing a low tech army

[@Shrek-vw4hs]

Anyone else feel like this channel needs more Recognition

[@reim3.14]

Классные ролики, подчеркиваю от сюда иногда что-то новое для себя

[@kaunas888]

Normally the great limitation with trying to restore rusty steel items is that one can remove the rust, but that also removes the steel from the item. It is interesting how now one can rebuilt (not just remove) metal by using a welder to add steel back for a more complete restoration.

[@IanDaviesRules]

yes, but remember that the added steel is not fully hardenable. It is mild steel as opposed to high carbon steel. So it looks nice and can cut veggies, but be careful when relying on it to hold up to real damage.

[@tosinmcboy]

I love watching the knife from the rust well I’m bored watching other videos. And this so satisfying to watch

[@goddesslussy8594]

why do you have the best looking rusty knifes and axes this is my second video i remember and you have the best looking rusty old things

[@carmenescobargonzales3472]

Muy buena restauración felicitaciones...Gracias por subtitular en español y compartir.

[@ForgottenShineRestoration]

¡Muchas gracias!

[@douglasperes514]

Iso comopartilhe

[@oncewastrash]

Great restoration! That knife was so far gone, and you were able to bring it back

[@ForgottenShineRestoration]

Thank you very much!

[@madhavdnair7874]

This guy's work is so much satisfying that I will manually rust anything just for his restoration video.

[@ForgottenShineRestoration]

😅😅🐢

[@hackedzach4103]

anyone else get flash banged on the welding lol keep up the good work love the vids

[@Forestcamp313]

wow dude! Your video is great, I'm watching it with pleasure. It's like a documentary, thank you

[@ForgottenShineRestoration]

Thank you, too!

[@pavloszimbrakos4410]

Not a documentary because documentary’s are boring and this was really entertaining to watch 😂

[@bopz.]

Really satisfying and very entertaining video keep it up I love these!

[@ForgottenShineRestoration]

Thank you very much!🤗🐢

[@freedomfarter2037]

your videos are the sole source of joy in my life

[@littleoreo495]

The before and after us just so satisfying 🤩

[@kiezyxx3869]

hi daddy forgotten shine restoration! my friends and i are ur #1 fans! we love your content so much and watch at least two videos a night. we hope to see more....of you....if you know what i mean.....anyways! have a good night forgotten shine restoration !!!

[@mydearestclover]

this is very true forgotten shine restoration, we love your videos… and you. continue everything you’re doing, you’re definitely doing something right. you’ve truly changed my life, i cannot sleep without hearing the sound of you sanding down rust. i especially like when you work with leather… everytime you post my heart jumps in my chest, and i urgently rush to watch you work. signed, your dearest, most devoted fan, clover

[@V4ND4L1Z3RR]

Yes, we love everything that... comes...out of this channel! I'm always excited to venture into another restoration video. Every time I watch one of your videos, i find myself struggling to contain my excitement, always on the precipice of gasping in joy! The way you so carefully handle your blades and wood, especially the sanding and oiling, is a joy to see. I adore your work and dedication to the craft and cannot wait to see so much...more of you. with much love, your most attentive fan❤‍🔥

[@mydearestclover]

@@V4ND4L1Z3RR slay

[@alexsandravanesov3203]

Был штык, стал столовый нож, берётесь рестоврировать, так рестоврируйте, а не занимайтесь переделкой. Вещь хочется видеть в оригинальных размерах.

[@user-pq1lp4yd3t]

Согласен ,убил девайс ....

[@oldnuts4123]

я даже не думаю что им на кухни можно что то делать тупой ели помидор режет, а так жаль находку природа ела ела , а потом еще и реставраторы добили)))

[@gallucinogenia]

Интересно, а этот штык или штык-нож от какого оружия?

[@to1tu_sr7_34b]

@@gallucinogenia может сабельный штык от сербского Маузера. Может не знаю от ли Энфилд.

[@gnoot50]

now that i think about it, how does this guy have so many old items to restore

[@Jordan-yo6jy]

i love how all the restoration vids always have a little cute aspect

[@gabyzsm]

É tão satisfatório mds ❤BR

[@lorenabarrera8796]

I love the sounds i feel really good watching your videos. Amazing job, congratulations ❤️❤️❤️

[@ForgottenShineRestoration]

Thank you very much! 😊😊

[@ohiyoresident]

Idk why but something about blackened steel seems so cool to me

[@isaiahpero7837]

Wow. That duck knows how to make an impressive handle. Kudos. 👍

[@kabuto7277]

I love this restoration, earned yourself a new subscriber!

[@ForgottenShineRestoration]

Thank you very much!

[@MsNovaris]

It's a shame a section of the blade had to go but the result was absolutely beautiful!

[@ForgottenShineRestoration]

Thank you!

[@Nexer55]

His videos makes me relax and I love his videos it’s amazing

[@ptsd73]

I love it. The process and the product.

[@limeflip_flop]

Ну что ж, мне кажется черепашка встретилась в этом видео восемь раз. А вообще ваши видео очень умиротворяющи и воодушевляющи, спасибо вам за это!

[@ForgottenShineRestoration]

Да, именно так, она появляется восемь раз! Большое спасибо за ваш отзыв, я рад, если

[@to1tu_sr7_34b]

@@ForgottenShineRestoration подскажите пожалуйста от какой винтовки штык ?

[@lotsoffreetime8392]

That's was very awesome restoration you did there something like this could ever return to its almost perfect original condition 👍👍👍

[@ForgottenShineRestoration]

Thank you very much!

[@gracebrown9078]

These videos help me relax so much before I go to bed!!! Keep up the great work!!! And thank you so much!

[@ForgottenShineRestoration]

Thank you very much, too! 🤩🐢

[@seancarter6492]

15:24 - I've watched well over 100 of these videos on a bunch of different channels WAITING for someone to do this! 😆 It's a tiny detail but it's like the only thing I know, which, admittedly, isn't ALL that much, that I haven't seen.

[@paulorth2251]

Very nice completed product. It's too bad you had to lose so much of the blade to make it look so good. Do you any idea what kind of weapon would have used this type of a bayonet? Thanks for sharing. 😁👍🇨🇱🇺🇸

[@ForgottenShineRestoration]

Thank you, too! Unfortunately I do not know which weapon this bayonet belongs to

[@tobiasnielsen5011]

it is not a bayonet, it is a German knife called Peasant Defense.

[@thecopper-cockmcdickinson8508]

That's a Bauernwehr from medieval germany, not a bayonet and he ruined it

[@garyrourke8201]

Amazing work on the blade. It almost looked unsalvageable with the corrosion. And I think turtle appeared six times.

[@ForgottenShineRestoration]

Thank you very much! Unfortunately you have overlooked turtle 2x...😂

[@kawakaze290]

@@ForgottenShineRestorationgary is rite tho .-.

[@evanratuhtulexd8514]

So satisfying when you remove the coarse dirt 🤤

[@user-px4dm1ss7f]

Блестящая работа. Спасибо за видик.

[@ForgottenShineRestoration]

Большое спасибо! 🐢

[@Restorology]

That was a lot of work. Looks great. What setting did you use on the welder? I am about to weld pits on a blade thinner than this and I am a little worried about burning through the blade. Cheers!

[@ForgottenShineRestoration]

Thank you for your feedback! It was very difficult to find a good setting, because the material is different thickness everywhere, you do not know if you just weld in a hole, the surface quality is poor due to the rust! I can only tell you I also fell through the sheet and try it best, start from the bottom ;)

[@vilmagomes4993]

Excelente trabalho, resultado pra lá de bom, sou encantada com reconstruções de coisas, objetos que aparentemente não tem mais jeito, parabéns lindo trabalho! Boa tarde

[@ForgottenShineRestoration]

Muito obrigado!

[@streakr8117]

I wish I had this bayonet attached to my M1 Garand! Excellent work! Hands of gold

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@thecopper-cockmcdickinson8508]

That's not a bayonet, it's a german medieval bauernwehr. It is a fighting knife for peasants

[@facepalmmigraine9509]

If a bayonet could smile, this one would have a huge one.

[@Emily-ye1qy]

Great video! Very satisfying restoration Do you know approximately what year it manufactured? I’m also curious how it came to be in your possession Thanks for the video

[@ForgottenShineRestoration]

Ciao Emily. Sospetto che il coltello abbia almeno 80 anni e l'ho comprato su Ebay.😅

[@cherilynnkeenright6699]

I think I saw the turtle 5 times, including the time tell us to watch for it

[@thecopper-cockmcdickinson8508]

It was possibly manufactured hundreds of years ago, and it isnt a bayonet, its a german fighting knife known as a bauernwehr, used in the late middle ages and renaissance

[@abjorman]

The end state is very good looking, and I like it overall, but it’s a long stretch to call this a restoration.

[@yukononun]

Indeed. It was remade into a different knife, not restored to what it once was.

[@str1p3dc4ndy]

anyone else watch these at like 2 in the morning and think about the major questions of life? me too!

[@ibrahemkurdish8606]

The sweetness of the turtle thing🤣🤣

[@ForgottenShineRestoration]

🥰🥰🐢

[@pilledupmind8461]

Excellent work! 👏🏻 I always wonder two things when I watch your videos: 1. Where do you get all these rusty and old items from? And 2. What do you do after the restoration? Do you sell them or do you have them in a display case at home?

[@ForgottenShineRestoration]

I look daily on all Internet sites where you can buy something and there you will quickly find. I keep the items and put them on my shelf, no one is allowed to touch them let alone use them. 😂

[@tarciliobeneditodasilvafil3921]

Parabéns, belo trabalho, bem caprichado, é assim que tem que ser 👏👏👏👏👏👏👏👏👏👏🍀🇧🇷

[@ForgottenShineRestoration]

Muito Obrigado!🤗🐢

[@user-jd3qs9zd4g]

5:43 I love how this legendary man encourage us to stay with thjs video 😌

[@mohammad3li461]

I am from Saudi Arabia and I am impressed by your work. We thank you for putting the Arabic language in order so that we can benefit from your beautiful experiences. I hope you will return to doing that. Greetings to you, beautiful

[@ForgottenShineRestoration]

Thank you very much for your great comment! I will always translate it in Arabic with! 🤩👍

[@user-gl3xf2jz3f]

Какая тут к богу реставрация.

[@TheDoctorFromArknights]

That one Immortal German Soldier who's still living to this day: *so ZATS vhere my Bayonet vent...*

[@jochrisnkids6510]

Lol

[@lordtyrus1]

It's amazing that there is any salvageable material

[@htzwillo7293]

I love how he hearts every comment. It shows how he has a commitment to this community.

[@ForgottenShineRestoration]

Thank you very much! 🤩🐢

[@veter995]

Надеюсь ты не черный копатель парень. А то после твоей "реставрации", вместо какого нибудь клейма древнего мастера, типа «Ульфберт» , мы найдем только следы твоей болгарки.

[@user-vj1nf7yr1z]

Он пишет реставрация, но реставрация подразумевает что размеры должны оставаться оригинальными со всеми деталями, тут же мы все видим совершенно другое, короче нож вместо штыка.

[@Sh9168]

It's very relaxing watching your videos. I would be interested to know how many man hours you put into these projects as well as some detail of the objects such as thier age and where you found it. Keep up the good work.

[@ForgottenShineRestoration]

Tons of hours have gone into each project, where exactly the items come from I can't track because I buy them on Ebay....

[@lyricalmusicvid4620]

This is not a restauration (you cut the knife) it's a modification of a rusted knife...good job by the way

[@washiesthail9019]

These videos make me fall asleep so fast

[@hklee95]

한국어 번역 제대로 안되어있어서 자막 바꿔주고싶다😂

[@pavloszimbrakos4410]

I know it’s a bayonet but at this rate he may as well turn it into a regular knife because what rifle is it going to fit on

[@thecopper-cockmcdickinson8508]

Not even a bayonet, it is a medieval german fighting knife

[@jayantilaljpatel4678]

Minutely taken care while restoring. What a great job. Congratulations.

[@ForgottenShineRestoration]

Thank you very much!

[@robnalu6436]

Moral of the story. "keep your tools nice so they don't rust" lol sweet content! Aloha~~ from Hawaii~~ 🤙🤙