Thanks a lot for watching, I hope you liked the video! Don’t forget to SUBSCRIBE! Check out master of damascus!!! / trkuljadalibor / trkuljadalibor Subscribe to his youtube channel! / @trkuljadalibor
Пікірлер: 153
@TrkuljaDalibor4 жыл бұрын
Perfect knife and also perfect video. I'm glad to see that you made something soo good from the steel that I forged.
@AVmake4 жыл бұрын
Thanks mate! It was plesure to work with your damascus.
@oneshotme4 жыл бұрын
Beautiful Damascus you made there I'll have to check out your channel
@TrkuljaDalibor4 жыл бұрын
@@oneshotme thank you.
@jeremysalazar67754 жыл бұрын
so how do I aquire some steel do you sell it?
@TrkuljaDalibor4 жыл бұрын
@@jeremysalazar6775 yes. You can contact me with mail or fb and instagram.
@Гашек-ш4н4 жыл бұрын
Отлично 👍🦙🦙🦙
@LeandroGoretta3 жыл бұрын
Very nice! It's a beautiful knife. Good job.
@ЧернякНиколай4 жыл бұрын
Класс 👍
@guyh.45534 жыл бұрын
Okay, questions. 1) Where/how did you find your blank? 2) How did you set the initial angle grind? 3) How did you set the cutting edge angle? 4) what was that bracket thingy for it? 5) What was the blue liquid you applied? ) And lastly, what was the liquid that you applied to bring out the Damascus? I liked the video but I didn't like not knowing what you were doing. Maybe I the future, add subtitles for us that are learning the trade. Well done knife tho. Thx!
@santiagonex2134 жыл бұрын
Amazing and perfect, the knife is so beautiful!! Good job dude
@AVmake4 жыл бұрын
Thanks man!
@Andy-Anthony4 жыл бұрын
Nice, super, excellent!
@AVmake4 жыл бұрын
Thank you!
@Marco-dq1ik4 жыл бұрын
It looks awesome but i am wondering why nobody is talking about the damascus not going down to the edge. Because like this the only purpose are visual effects. The other advantages of damascus for a blade arent used like this.. Still a very nice knife!
@tatepishepard4 жыл бұрын
Beautiful.
@zlatkodervisic97274 жыл бұрын
Bravooooo. Drago mi je da si zdrav u ova šugava vremena. To je ti. Prelijep uradak. Čestitke... :)
@AVmake4 жыл бұрын
Hvala! Ja sam super, a dok je tako nozeva ce uvjek bit haha
@bj..93934 жыл бұрын
Вот это нож 👇👉kzbin.info/www/bejne/e3LJo2uJebWti7c👈
@AB-co7er4 жыл бұрын
Nice piece of combined effort. Another top dollar blade success story.
@junaidsarwar53944 жыл бұрын
Awesome,, give it to me..😁
@АлексСвятой4 жыл бұрын
Красота
@mrskeleton57994 жыл бұрын
Dang man that’s a really great knife great job
@AVmake4 жыл бұрын
Thank you!
@sperber-knives4 жыл бұрын
The knife is beautiful!! Great job mate, as always!
@AVmake4 жыл бұрын
Thanks mate!✌️
@yousefelmalk13864 жыл бұрын
hi dude, is that oil or what in 6:14 , how the knife took this engraving with this material in the glass?
@perrierri76874 жыл бұрын
Definitely one of my favorite knives, Great job!
@AVmake4 жыл бұрын
Thanks,glad you like it!
@ramizkaraeski10474 жыл бұрын
YARRRRRRRRRRAAAAAAAAAAAAAAKKKKKKKKKKKKKK
@danmurphy93044 жыл бұрын
This is still my fav shape! Excellent content.
@AVmake4 жыл бұрын
Thanks man!
@steeveetv17504 жыл бұрын
In my opinion you Are best knifemaker on KZbin mate ♥️😊
@SharpWorks4 жыл бұрын
That came out awesome! Amazing job!
@AVmake4 жыл бұрын
Thanks!
@cyrussvg48254 жыл бұрын
Comme d'habitude un travail parfait... Perfect work
@robinsonnuila47153 жыл бұрын
Beautiful knife! I want to make something like that sometime. What belt grinder do you use??
@paulosergio27914 жыл бұрын
Faz uma pra mim né aqui do Brasil amigo? ( Make one for me, right here in Brazil, friend? ).
@Donorcyclist4 жыл бұрын
Very nice work!
@MendicantPriest4 жыл бұрын
Such WOW
@texasoutlaw42223 жыл бұрын
While i agree with most that it us a beautifulk ife...i prefer the traditional technique of forging that shape rather than cutting. Beautiful steel though.
@qg_do_corte4 жыл бұрын
Primeiro a comentar😊
@ugurbora48894 жыл бұрын
KANKA SEN BİR HARİKASİN SEVE SEVE İZLİYORUM BÜTÜN VİDEOLARINI ❤️💋❤️💋❤️💋❤️💋❤️💋❤️💋❤️💋❤️💋❤️
@vincentdavid91373 жыл бұрын
Really nice work but for my part I choose something else for the handle
@artart70714 жыл бұрын
👍👍👍👍👍💪💪💪
@ChristopherSalisburySalz4 жыл бұрын
What kind of wood are the handles made from?
@AVmake4 жыл бұрын
Leopard wood
@calebwitt2074 жыл бұрын
I admire people with skills like this. That is one of the most beautiful knives I have observed on you tube.
@PremSingh-wj1nk4 жыл бұрын
Hello Great video What is, the steel you use Im from south africa
@Apathymiller4 жыл бұрын
No heat treat?
@GrimReeper7214 жыл бұрын
Another stock removal, 👎🏻👎🏻
@jasonchilders35264 жыл бұрын
Bad ass
@editor00184 жыл бұрын
Tolerances, fitment, finish and attention to detail are amazing. The result speaks for itself! Well shot and edited video. Adds a lot to the experience. Thanks
@AVmake4 жыл бұрын
Thank you for watching!
@lifeskillsdn3 жыл бұрын
Beautiful knife
@mauriciolacruz3 жыл бұрын
Wowwwww!!! Impressive!!! 😍
@perrierri76873 жыл бұрын
Hello AV, What type of wood did you use as handle? I am currently looking into making my own knife. Awesome video!
@AVmake3 жыл бұрын
Hello, I use leopard wood for the handle.
@andrejohnson67314 жыл бұрын
Superb! What type of wood is that?
@AVmake4 жыл бұрын
Leopard wood
@andrejohnson67314 жыл бұрын
AVmake is it dense, does it need to be stabilized with resin?
@endangkusnadi18222 жыл бұрын
Sangat menakjubkan. Keren.mantap.
@cromakey4 жыл бұрын
Gorgeous!
@jay-peephillips23494 жыл бұрын
Piece of Advice: try covering the sharpened edge with tape or clamp down the piece before taking to the Drill Press. If the bit catches the blade it can grip it and cause catastrophic damage.
@jimmywoods6744 жыл бұрын
It is a beautiful knife and very well made. But it is still not Damascus steel, Damascus steel does not exist anymore. Just Beautiful forge welded steel.
@кириллжуков-з4н3 жыл бұрын
Один и тот же эскиз много раз. Для чего???
@workcraft63174 жыл бұрын
Только благодоря вам я начал ковать ножи . Вроде бы получается довольно неплохо. Кому интересно прошу на канал думаю вам понравится
@divinoamaral5364 жыл бұрын
Mais um excelente trabalho. Parabéns. Like from Brazil. 👍🔰
@VolodymyrBilichenko3 жыл бұрын
What is a price of the steel and the final knife 🔪?
@adjustflow6893 жыл бұрын
Whats the oil that you using on the las sanding?
@jma51774 жыл бұрын
Very Nice. Qual o número da lixa vermelha? E o número da lixa verde?
@blade23602 жыл бұрын
This knife made is out of this world
@oliek123 жыл бұрын
Wow nice knife, good job
@openup543 жыл бұрын
Are you selling your creations
@audipmuaja18094 жыл бұрын
ini bakal karatan gak bahannya?
@chakireladraoui93314 жыл бұрын
♥ ♥ ♥ ♥ ♥ ★ ★ ★ ★ ★
@darnutzer3 жыл бұрын
Frome where i get this blanc?
@dbeez10754 жыл бұрын
Beautiful knife, great work. Can you tell me why you did rough grind free hand and after heat treat you used a jig? Thanks
@TheDarkhalo29854 жыл бұрын
So dumb question probably lol. But what is the red tool you used to hold the blade in place while you sanded the sides?
@jonotis19224 жыл бұрын
It is a magnet that is commonly used to hold pieces at the correct angle for welding.
@reece33503 жыл бұрын
KZbin is down I can’t see it
@orlandoromero39323 жыл бұрын
Quiero una está muy buena
@ПавелИонов-я2ъ4 жыл бұрын
very elegant and beautiful knife turned out, grasping and convenient, thank you for the video👍
@nachosarlanga5014 жыл бұрын
Que maravilla de cuchillo!!! Felicitaciones crack!!!
@НАТАЛИЗолотаярыбка4 жыл бұрын
👍👍👍
@baboowam233 жыл бұрын
This some gourmet shit
@matthewnazaroff95374 жыл бұрын
I can’t believe how beautiful that knife turned out. Great work!
@AVmake4 жыл бұрын
Thanks man! Glad you like it.
@danstearns12213 жыл бұрын
That is gorgeous.
@taerossmassler3263 жыл бұрын
Where can I buy one?
@andrejohnson67314 жыл бұрын
You know what would be amazing? Collab with Shurap!
@jogodasminhocas75404 жыл бұрын
Merece um super like!!!!
@edgesam49583 жыл бұрын
So nice design 👍
@t3ooby4 жыл бұрын
And this what I call a piece of art
@AVmake4 жыл бұрын
Thank you!
@yaryar21764 жыл бұрын
I want one👍👍👍
@lancemillward19124 жыл бұрын
Great collab
@vasg44724 жыл бұрын
What is this red knife holder when you’re grinding?🤔
@Nospheratorum4 жыл бұрын
It's a welding magnet. They're used to hold steel pieces at a 90/45/135 degree angle when welding.
@vasg44724 жыл бұрын
Nospheratorum thanks
@мішамихалевич-г5м4 жыл бұрын
Чудовий ніж
@ramoo67143 жыл бұрын
Great work man, beautiful knife.
@vedranvidovic69104 жыл бұрын
Bravo
@MukeshKumar-ll3xy4 жыл бұрын
Give me
@lucasferraric4 жыл бұрын
Nice job my friend! Handle 10/10
@bulldogkesel2914 жыл бұрын
Vav Price
@firasaldleme19794 жыл бұрын
روعه.. جميل جدا 💕💐
@ikenitschke32334 жыл бұрын
any chance of finding the template?
@ry_th_lion68594 жыл бұрын
Again you did an amazing job keep it up
@petten334 жыл бұрын
I'm in love with the blade, before the handle inserts.
@Vicserrano1004 жыл бұрын
Is this supposed to be tutorial on how to make the knife, or just to show his skills at knife making. No explanation at all of each step and description of materials being used.
@sk-nh5wf4 жыл бұрын
i like it. a simple video to show the process. editing with text or voice would clutter and take away from the experience, distractions from the art at hand. there's plenty tutorials out there if you need to know the details in each step, just use the right search terms - "how to"
@ricallen72734 жыл бұрын
I like the handle work, great job
@bunkerfuelsupplier21074 жыл бұрын
How can i get one of that piece of nkife i like it
@kaibauer-derrick80684 жыл бұрын
You sure love your sandpapers.
@babremazandaran31354 жыл бұрын
Weri weri good👍👍👍👏👏👏
@hanifzafrullah3814 жыл бұрын
What liquid to appear the pattern?
@AVmake4 жыл бұрын
Ferric chloride
@kevocaudillo45644 жыл бұрын
Pure beauty! Thanks for posting this awesome how to video!😎
@AVmake4 жыл бұрын
Thank you for watching!
@КудайбергеновКудайбергенов-г2й4 жыл бұрын
Браво 👏👏👏👏👏👏👍👍👍👍👍👍👍👍👍
@oneshotme4 жыл бұрын
Beautiful knife and great job making it Enjoyed your video so I gave it a Thumbs Up