Knife Sharpening using the Work Sharp Guided Field Sharpener

[@BOOSTEDLASER]

This actor is great. WS should hire this guy.Very likeable.

[@Goodoldm]

From Work Sharp, the Guided Field Sharpener: It's my go-to knife sharpener for touching up my blades because it works better than all others I've tried in its class. Thanks for sharing.

[@joeframo3347]

Doug I wanted to buy extra diamond plates to keep put away but I can't find them on Amazon where I bought the workshop field sharpener do you know where I can get them thank you Doug such a great video I know it's not new but anyway I hope you read my texts

[@grovesy333]

I love this thing I’ve sharpened everything with this thing including nail clippers no problem don’t know why people struggle with this thing get good is all I’ve got to say 🤷‍♂️

[@urikleefeld5988]

Been using it for a couple of weeks now and I have to admit that this is an excellent product, thoughtfully designed and meticulously executed. The price is very reasonable too.

[@nuancolar7304]

I just got one of these. Love it. Having all those steps in one tool is nice.

[@joeframo3347]

Hello Doug thank you for this wonderful product when I take my dog to the park it's a gated area I could sit down on a bench and sharpen my knives I have the electric workshop tool at home but I like to carry this with me great product wonderful tool thank you again for this great product my friend God bless and be safe 😎🖐️💕👍

[@joeframo3347]

Hey Doug thank you for sharing this video I'm ordering mine as we speak with a case to so I can keep it nice and clean in that beautiful case that you can buy for it it's a really great tool to have felt the field really appreciate it man I think they did a really great job in engineering this product lot of planning in light of people sitting at the table discussing how they were going to do something for the consumer I think it's just wonderful thanks for sharing God bless and I subscribe to your video

[@untrucmarrant]

This is not working on my leatherman mut, kabar bk2 and gerber ghostrike, can someone help me ?

[@unclecoco2082]

i have had one of these for a couple of years now and rate it very highly for small/medium knives, I always take it with me fishing and its great on my kitchen knives, my only gripe is, as something meant to be taken into the field it should come with a protective pouch of some kind, doesn't have to be much just a bit of light weight nylon stuff like they use in light weight backpacks

[@tazzler664]

Hi Doug ! I love your vids ! and they have been super helpful ! but I haven't see on showing how to sharpen karambits ! if you could make a video with your skill would be amazing !!

[@yahman21]

Excellent tutorial. Now I can properly use my Work Sharp and dull knives are no more. Thanks!

[@lukeg2091]

Work Sharp needs to post this video on their website.

[@Griff33]

Will this sharpen my knife if it already has a convex edge on it from the Ken Onion workshop?

[@catahoulabulldog9485]

I have one of these and love it! Hey Doug what was that first knife in the video you were sharpening???

[@harf849]

Am sorry but this system was horrible! Dulled my 551 griptilian and a Spyderco para 3. I watched this video a bunch of times and it just kept getting worse. Maybe I got a faulty unit or the stones were of bad quality. Will stick with the sharpmaker.

[@JohnDoeEagle1]

The good old fashioned Spyderco Sharpmaker and Wicked Edge sharpeners are far and away superior to most of this other junk. In nearly 40 years I have tried them all and settled on these 2. Why, you ask? Because they both work and don't ruin your knives.

[@harf849]

@@JohnDoeEagle1 I agree. The sharpmaker saved the day in my case and I actually use it for high end knives (CRK, Hinderer).

[@grovesy333]

User error you clearly didn’t use it properly ive repaired a chip where the tip was and sharpened my friends para 3 with this thing no problem whatsoever, I’ve sharpened my axe and machete with this thing no problem too

[@garys8415]

🇺🇸

[@alexandergilman3394]

Is it typical to do coarse at 20 degrees and then fine at 25 degrees? What is the result of this method?

[@tonycanniffe2360]

Alexander Gilman It's called a micro bevel. It's supposed to act a bit like a convex bevel that the belt sander puts on a knife. The idea is that the edge will be a stronger than a pure V bevel. (That you would typically achieve on a guided edge system like the Lansky.) I don't think the addition of a micro bevel is necessary if you are freehand sharpening. It is extremely difficult to keep the angle precise. Therefore you end up with a convex bevel anyway. Heaps of vids on sharpening on YT

[@oscrm1760]

This 5 steps coarse ,fine ,ceramic coarse , ceramic fine and last leather stop work for an leatherman 154cm and S30v blades.

[@xderiwx]

How do the ceramic rods compare to the Spyderco rods in terms of coarseness? Is the Work Sharp Fine similar to the Spyderco Fine? Or, does anyone know some rough grit ranges of the Fine and Course? Thanks!

[@joeframo3347]

Doug you're totally awesome thank you for sharing this video where everyone is going to or your viewers are going to buy this tool it's very valuable to have out in the field if you're an outdoorsman and you love knives this is perfect absolutely perfect thank you again 😉👍🤠🖐️👌😎😎

[@elflakeador09]

Are you applying much pressure on the knife when using the diamond and ceramic parts?

[@andrewyoung7032]

Awesome video thanks Doug. Simple and straight to the point.

[@garrettferrell6821]

I bought this sharpener a couple months ago but have yet to attempt to use it..I started collecting knives a couple years ago and have a decent collection most of which are in “super steels” S30V,S35VN,LC200N,M390,20CV,204P,Maxamet,Cruwear,S110V,S90V,etc all of which have pretty good edge retention.I usually buy at least a knife or 2 every month and my knives are used for cutting boxes,tape,plastic straps,zip ties,etc..I have knives I use for camping and hunting which I don’t get to do nearly as often as I would like to..since I’m a complete amateur when it comes to sharpening a knife,I usually use my guided Lansky sharpening system,it does ok with steels like 1095,SK5,N690,VG10,420HC,440C,etc but my Lansky doesn’t have diamond stones so it’s really not cut out for the higher end stainless knives..I bought this particular sharpener because I wanted to actually learn how to sharpen a knife without having to depend on a guided system to do it for me and this was recommended as a good starting point.Im here to make sure I know how to properly use this thing before I get started with it.Im going to practice with it so I don’t have to depended on a complete guided system 100% of the time...with that being said,after seeing the new Work Sharp precision sharpener which is essentially the KME and other high end sharpening systems at a fraction of the price so I will be ordering it as soon as I find it in stock.I will use it on my higher end knives while I learn and build my confidence with this Work Sharp field sharpener

[@wizardofahhhs759]

I need a sharpener for D2, any suggestions?

[@seventiesandbeyond]

I have a few Opinel pocket knives in S/S. Would I have any issues sharpening S/S pocket knives?

[@sambaggins2798]

I did watch the video and it explained everything lol.

[@GisSlicknSmooth]

So much hair on that arm....

[@andresmiguel2573]

Can you get a mirror edge with this sharpener.

[@Chase1297]

I've been skipping the coarse ceramic. I've noticed that I'm losing sharpness going from fine diamond to fine ceramic. I will try to stop skipping the coarse ceramic and see if that helps

[@Chase1297]

10 mins later and 2 knives shaving sharp with using the coarse ceramic before fine. Answered my own question lol

[@meltdown1232000]

I can get an edge that shaves hair...it doesn't last long...but, it's good for a quick workable edge.

[@Indiana_Jesus]

Well it all depends on what knife you own to say that something expensive can last a long time

[@cjcutter1571]

Just recently picked one up!

[@theberryarmy2654]

Love your video you have 1234 subscribers

[@עמיתחדד-ט7ז]

how to siessrs on the work sharp ken onion??

[@yehoshuawildman]

גם אני מישראל 😂⁦🇮🇱⁩

[@Indiana_Jesus]

Turn it on and put it in the slot for scissors pretty easy

[@pittriversavage]

I already ordered mine for my Cold Steel SRK

[@Mando2121]

Im having trouble getting the tip sharp

[@budterence85]

Great tool. I have four of them

[@octogirl2046]

Great video. I love my new toy!

[@joeframo3347]

Doug you're so damn experienced in this stuff you've been at this for a long time really getting an education with watching you and you explaining how this stuff works you're an awesome person thank you for sharing this video your best friend from Atlanta Georgia

[@DaBaldMan]

The leather strop don't work good for me

[@jurj97]

I'd recommend getting a stropping compound

[@tyroneshoelaces9742]

You don't do work for work sharp anymore?

[@koltenmeyers3584]

zero 4U he does! I saw him at the Portland sportsmans show today and he sold my dad that same sharpener and even sharpened his knife but he just doesn't post videos anymore

[@PreciousBoxer]

The back side of my fine diamond plate says China, from right out of the package. Go figure.

[@AllenMaestas]

Wish there was a field sharpener that kept the convex edge from the Work Sharp Ken Onion

[@wrongmower]

that will put a flat grind on it i believe

[@bradbuckner9496]

+04dakota Hi guys, NOTHING will sharpen a convex blade with out YOU doing the work in the right way.

[@lutfazaman1747]

04dakota hg

[@wrongmower]

???

[@theberryarmy2654]

But I wish I could get this but my parents won't order it

[@sargentt6003]

BenchMade knock off(stolen design) Always buy American,not chinese knock offs

[@jakelawrievideo]

Old School the bench made one says worksharp on it...they are working together

[@daleray3895]

Jake Lawrie yep only difference is the color LOL