Knifemaking: small EDC knife

5:20 Odlična snimka kaljenja!! Puno ručnog rada i ljep nož!

[@albertledesma5173]

The mustard etching was freaking awesome!!!

[@cctz_1]

AV make has the best knife shapes hands down. They just look do unique yet so simple

[@lovejcdc]

Very nice work and a great outcome.

[@larryellis5675]

Like the music ! Great looking knife

[@OldNew45]

I have some more high tech tools, but when I make a knife for someone special, I still use that bevel jig. I love that thing.

[@tylajonsie]

Your jig you made to get the right angles is phenomenal. Well done

[@dennisobrien3618]

That design is generally attributed to Aaron Gough. He probably could have made a tidy sum of money if he had patented/licensed it, as it is very effective while not overly complicated, and many beginning knifemakers have utilized this design.

[@alangarbett2734]

Thats an awesome little blade.Is it possible to get a copy of the pattern.

[@alexanderg4890]

You Made a very enjoyable Video, the music is also very nice thank you for your effort.

[@OUTDOORS55]

Beautiful knife! Goes to show what you can do with some basic tools. Great work my friend 👍👍

[@AVmake]

Thanks man,love your channel 👍

[@joshualopez5815]

All I got to say is I really enjoy this knife making video bc I love the design and I love how it's not so big and chunky and just everything about the knife looks amazing

[@timpande6900]

I love EVERYTHING ABOUT THIS KNIFE This is beautiful! If I could afford it, I would pay for it. Who knows, maybe I can....

[@genesiseli1461]

Awesome little knife

[@Dadakki291]

Oh man that quenching part of blade you just earned my subscription.and subscribed

[@faithnomore4023]

Очень нравится как ты делаешь ножи!Very good 👍

[@vinnysmith587]

I like the idea of a fixed blade EDC. Do you make sheaths too?

[@LeandroGoretta]

Genial! Excelente trabajo y buen video.

[@lisag2771]

I would Love to have that pattern. It’s a beautiful knife. Well done Sir.

[@RoomiesGarage]

Great footage of the hot blade dipping in the oil!

[@magicdaveable]

Beautiful knife.

[@zikolatesla]

Kako ti se sviđa ovaj Einhell belt grinder? Dobar za metal? Hvala i pozz

[@AVmake]

Smece zadnje... Bacio sam ga i nabavio 2x72.

[@Dadakki291]

Can you do twin mini double edge blades with single sheath to carry them both

[@suthernsavage5643]

What did u quench it in

[@PB8man]

How long was it in the vinegar? What about the mustard?

[@soulhunter0]

Great work!! How long did it take for file the bevels to the desired dimension using that jig at 4:00?

[@AVmake]

Something like 1h for all bevels

[@fut_bucker6966]

AVmake that’s pretty good

[@jamesdiffenderfer2392]

Would've been nice to see you affix the pins through the scales and explain what the stuff in the syringe was that etched the blade.

[@brucebarnes9138]

Nice blade

[@dnick1981]

Great knife!

[@Dadakki291]

What kind of tool you used at 4:14

[@markonovakovic9521]

odlican video, samo jedno pitanje, kako stavis secondary bevel kad is okalio vec noz i do koliko tanjine ostavis prije kaljenja. Hvala

[@AVmake]

Hvala ,koristim papirnata kola za ostrit, pokazat cu u sljedecem videu.

[@markonovakovic9521]

@@AVmake puno hvAla

[@razvanburada1648]

Nice 👍 I like it!!

[@kuhlbeans]

Sick man. Beautiful knife

[@sasquashtowers1067]

At 4:05.... Can anyone tell me what degree that is and what grit to eat up that material? Thanks

[@NicksKnives.]

It's a bevel jig that uses a file not sandpaper. Probably the best way to do bevels with hand tools.

[@juanjato841]

Que acero es?

[@johndoes2434]

Did you use gun bluing to darken it

[@SamuelMcCunemusic]

Very nice!

[@justcoffee3617]

hey brother can you explain your jig for edging. looks simple but has it's own complexity maybe because only one angle is shown. but would love to know more about it. thanks and keep up the great work

[@AVmake]

You can find video on my channel where I build it.

[@andredwy5684]

5:15 why u burn it?

[@robertgray9802]

Nice work and what you did with that mustard to put that finish on the blade I never heard of and the steel you use is it a carbon or stainless? Did you use a convex or hollow grind?

[@AVmake]

High carbon steel with mustard and vinegar finish you have everything in video how i did it...flat grind.

[@Dadakki291]

Love from Pakistan brother love from pakistan

[@greysonhackett911]

How long did you leave the mustard on the blade? Did you heat it or do anything else to it?

[@AVmake]

I didn't heat it just put mustard and let it dry around 20 min.

[@jmt8575]

Great job! Congrats

[@isaachinojosa9863]

Great video man! Question, when grinding the bevel, do you go all the way or leave a little bit of it of material for later sharpening?

[@rodneymiddleton1044]

isaac, yes you do leave some material due to heat treating as depending how much is left this could cause the blade to bend in the process. If you are using pre heated steel of any kind then you can grind all the way to sharpness. However with pre heated steel you must be careful not to over heat the blade as it will weaken the blade o.k. I hope this helps you and happy grinding :-)

[@FordFracture]

Well done 👏👏👏👏

[@Love2Destroy]

mustard? like the condiment?

[@AVmake]

Yes...

[@northernwoodsman]

Its acid, you can patina a blade with vinegar quicker.

[@007Jaredboy]

Ehhhhh I dunno...imo it makes the blade look dirty and unfinished. A stain finish is much more appealing. Overall nice knife and appreciate the hard work you put into it though.

[@melaniefinlay8868]

Beautifully done!!!

[@Koffetar]

Great work! At what angle do you file bevels? How do you measure it?

[@Tjkruse9889]

I wish u had a list of things used to make this

[@dennisobrien3618]

It is a personal preference, but I like the way the mustard etch turned out. Very good job all around.

[@mickolay]

А, что за горчица, которая травит сталь?

[@bruce1315]

Need to invest in a bandsaw. Good lookin knife!

[@ortiko]

Well done ! Keep on the good work. What is the thickness of this blade?

[@veljkoantic1137]

Koliko dugo je stojao u sircetu? I sta si uradio sa senfom?

[@LCantwell]

Nice work

[@alexribeiomarquesi4891]

Parabéns, trabalho muito bem feito

[@Ejs3709]

Safetytip for using a drillpress: use a clamp to hold your workpiece steady. And don't wear gloves. Thx for the video and nice piece of work.

[@gatofelix8331]

Ebel-Jan Schepers Extreme important this words

[@chadmerkley9465]

Doowd is wearing shorts, and no gloves on the grinder..... Hahaha

[@sasquashtowers1067]

Ebel-Jan Schepers I seen a guy get his glove grabbed and do real damage to 3 of his fingers and wrist.

[@ddovelius]

Beautifull knife my man! What is the wood you used for the handle?

[@AVmake]

Thanks,I used cherry from my backyard.

[@rvalentim...3389]

Hi there! What did you use to make this effect on the blade?

[@AVmake]

Vinegar and mustard,you have how i did it in the video.

[@P3O3]

good job!

[@gfrank8058]

A beautiful job. Awesome craftsman's ship. GF1 😁😁😁😁😁😁😁😁👍👍👍👍👍👍👍👍😎

[@Spirit_Pixxelmaster]

I want one 🤩

[@memento1469]

At 4:55 it looks like the "extrema ratio RAO 2" !!

[@jimybrooks6055]

Steel type did you use

[@AVmake]

80crV2

[@Wildz]

Whats that thing you used to file the bevel??

[@AVmake]

Filing jig,I have video how I made it.

[@sevensmaker]

Good job, congratulations

[@leosanchez8032]

Very nice

[@JordanJessop]

How does this whole knife give away thing work

[@coydog669]

Awesome video! Do you use a specific kind of oil?

[@AVmake]

Thanks!I use vegetable oil.

[@jeffersonrodrigues9588]

Parabéns fico magnífica.

[@firewall7611]

Song???

[@sbjennings99]

Awesome informational educational video experience Y'alls

[@shimonsoares8477]

Vc envia ao Brasil?

[@Grinder__]

Thumbs up partner...

[@TwoStrokeViking]

Awesome job! How did you sharpen it?

[@AVmake]

With (razor sharp) paper sharpening wheels.

[@dknive4594]

AVmake I use the same thing

[@jakubdrahokoupiljd]

I like the video because of the real time scenes.

[@utahnick]

Not even done watching but this is good

[@quattro4468]

Looks like a kitchen knife.

[@liamjack5944]

how long did it take to file the primary bevels?

[@AVmake]

Something like 20 min for one side

[@courtneesdad]

Nice video bro. Just found this channel. I subscribed

[@chetan.gondaliya]

Please Upload Knife-Sketch Link so we can Download and Get Inspired by Your amazing Craftsmanship

[@nosaints6173]

U sell them???

[@AVmake]

I do.Contact me on the mail if you are interested in any of my knives.([e-mail])

[@scottecooke]

Great job. What steel type and thickness? Just found you and subbed.

[@AVmake]

Thanks ,I think this is 80crv2 piece I had (5mm)

[@scottecooke]

@@AVmake cheers :)

[@MrDIRT-wm4zi]

I love yours hack

[@13cknapp]

How much

[@antoniocpereira9360]

Lindo trabalho

[@brinkerhoff8]

I'd buy it!

[@Doingitrightplumbing]

U have a new subscriber

[@hau5387]

Templates???

[@fab78es25]

Quero uma! Faz por encomenda!?

[@oddball0022]

3:05 I see a doggo

[@13cknapp]

I’d like to purchase

[@Dadakki291]

And I loved the music made me comment 4th time

[@СтасКарабас-я2т]

👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

[@ДенисТокаренко-у6м]

Красиво да и сам мастер класс но знать что ещё делает вообще бы здорово 😤 было бы хочу 🔪 такойже 😤😤😤А так да👍👷 лайк

[@juareznicolaufilho5080]

Linda!!

[@АлександрВаренов-л8я]

👍

[@cooperwells4409]

Nice but slick, that shits kind of wack you shouldn't have added the second pair of stripes on the blade.

[@chetan.gondaliya]

awesome

[@lamproknives]

You're very lucky the glass jar didn't break, it happened to me

[@jaylopo1245]

Gaetan Thomas the less oil you use, the less mass there is to heat up, therefor greatly reducing the chance of breaks :)

[@lamproknives]

@@jaylopo1245 really ? If there is less oil then it will heat up faster so the heat choc on the glass will be even harder no ? Just my theory, maybe you're right, would be interesting to see if yes 🙂

[@rowanfernsler9725]

Looks very similar to a bench made knife, don’t know why