How to Use a Pipe Wrench

How does a pipe wrench work? Demonstration of how to correctly use a pipe wrench to grip a soft iron pipe or round fittings.
Learn how to properly grip a pipe using a pipe wrench. If a pipe wrench, also sometimes called a Stillson wrench or a stillson's, is used on hard pipe, the wrench's ridged jaws can not bite into the pipe and the wrench could slip. The proper size pipe wrench must be used for different sizes of pipe.
Check out my other videos, bookmark this channel by subscribing, it’s free! / @know-how-now

[@Know-How-Now]

Link to other Know How Now plumbing videos: kzbin.info/aero/PLvce66kQTjJTz0cqcI_HDnaLbNLDONCVP There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link: www.youtube.com/@Know-How-Now/videos

[@bruceczar880]

Excellent instructional. Articulate, clear & concise, minus the stupid extraneous ramblings of so many other how-to KZbin's.

[@Know-How-Now]

I try to keep the videos direct, short and informative. Thanks for confirming that I've met my goal!

[@eddiecollins6258]

That tip to release the wrench from the pipe was gold! Excellent video, thank you!

[@Know-How-Now]

You are welcome, Eddie!

[@robbie1212]

Wow, never knew that, very interesting

[@marshallgoggins5450]

@@Know-How-Now Can u pls explain why the wrench must have a titled jaw. And what are the essential point one must notice when design a wrench? The mechanism in pipe wrench is hard to understand, I designed one myself, but it doesn’t work smoothly as the bought one. The one I designed can only grab the pipe when it’s close enough to the pipe, a little distance will cause the failure, I don’t know where went wrong.

[@Know-How-Now]

Hi Jason, That's impressive you are designing your own wrench. I don't have any experience with design, your question is beyond my knowledge and experience.

[@marshallgoggins5450]

@@Know-How-Now okay, thanks for your reply, if u know anyone who is familiar with the mechanism, could you pls note me a little bit? I’m working on an automatic wrench system, but the mechanism seems like the only part that won’t work with me, I can really use some help. Just sayin, if it’s not too much to ask, thanks anyway.🙏🙏🙏

[@omnilife691]

After 30 years I never knew the tip to release the pipe, thank you!

[@Know-How-Now]

You are welcome!

[@fractuured1]

Couldn't get my wrench off the pipe, and, lo and behold, all I had to do was push in on the bottom leg of the upper jaw. Thanks for the instructions before I resorted to throwing the thing in the river!! (And it's always a bonus when we can learn from some of the helpful comments, as well.)

[@Know-How-Now]

It's my pleasure, Crystal. Thanks for taking the time to comment. Good to hear your wrench didn't end up in the river. lol.

[@PhilTheProf]

I was going out this morning to get a stilson wrench. Thankfully i came across this video on how to use correctly. Thank you girl. Great to watch a video without a 30 second intro and awful music.

[@Know-How-Now]

You are welcome. Happy plumbing.

[@Namamapoto]

straight to the point. watching from zimbabwe. thank you

[@Know-How-Now]

Hello to you in Zimbabwe. You are welcome.

[@gitfunfel9849]

this is the best movie! perfectly explained, clearly, concisely and lucidly. thank you.

[@Know-How-Now]

You are welcome.

[@GeoMatRay]

Very clear and well-done tutorial, presented articulately, no rambling to needlessly elongate the video... Liked and subscribed!

[@Know-How-Now]

Thanks for the compliments and for supporting the channel and subscribing. Your support is greatly appreciated.

[@whoisprep4386]

Best video I’ve seen so far on how to actually use this tool. Thanks for being so thorough.

[@Know-How-Now]

You are welcome. Thanks for watching the video and taking the time to comment.

[@trueindianbharat4657]

So useful ! Loaded with tons of practical knowledge in a crisp video.

[@Know-How-Now]

Thanks for the compliment, it's always great to hear the video has been helpful.

[@silverestore]

To prevent bite marks on threads, try wrapping a piece of leather around the threads then applying the jaws.

[@TheLboogie330]

Or just stay off of them ?

[@legendarypillow1450]

They don’t matter

[@gial8862]

@@TheLboogie330 3:50. hes talking about fittings with threads.

[@joejeffery8581]

Thanks for the clear, efficient explanation

[@Know-How-Now]

Thanks for the feed back and compliment. I was aiming for clear and efficient.

[@carlrabe4384]

Holy Snarkies!!!! after watching 4 "review" videos that were just table-top crap... I see your video... I'm no pro... My jaw was literally down the whole time. Sooooo much info!!! Thank You! Great stuff!!!! Big things for me were the "jaw spacing" and then the thumb release.

[@Know-How-Now]

Hi Carl, thanks for the compliment. I try my best to make the videos helpful. There are now over 200 how to/repair videos, organized by playlist on the channel. If you have a few moments, check out the channel. You can easily find the videos by subscribing (free).

[@belletebellete8473]

Straight forward and to the point. Thank you.

[@Know-How-Now]

You are welcome, thanks for commenting.

[@tomnkathiedoran3471]

been using these most of my life, but wasn't getting results today & decided to look for a Yute Toot, feeling silly doing so. But I learned some stuff here. Thanks. I like that this was ZERO frills. I have ZERO patience for drawn out musical intros, or so called "background" music that drowns out the speaker. excellent vid.

[@Know-How-Now]

Thanks for the compliment, Tom. I keep the videos as short as possible, but informative. We are all busy people. Sadly, the algorithms often reward the long winded explanation. Please consider clicking on the channel name and checking out the rest of the videos and subscribing... it's free.

[@xpmark1]

Thanks, very good job explaining.Very clear and concise in a pleasing relaxing tone of voice,inspires learning.

[@Know-How-Now]

You are welcome. Thank you for the compliment. I do my best to make quality videos.

[@RagTimeJack]

Thanks for this video! I'm in the middle of making some furniture using iron pipes and after doing an intital fit up some of my fitting are jammed in place and I now know exactly what tool I need to get the job done. Off to the hardware store!

[@Know-How-Now]

You are welcome. That sounds interesting, furniture made from iron pipes.

[@dimz1a]

شُكْراً عَلَى جَمِيعِ المَعْلُومَاتِ الجَمِيلَة Thanks for the good information

[@Know-How-Now]

You are welcome.

[@orchishgrunt7888]

Wow... Nicely constructed! The only thing I'd appreciate more are some hints and tips, but there are a few in the comments and honestly I really enjoyed how informative this video was describing these essential details about how to properly and safely use a pipe wrench :) I had no idea that they had a basic ratchet-style feature built in by default!

[@sonnie6302]

Thanks, I learnt something new from this video. When it comes to pipe wrenches, nobody can beat Ridgid. - from a Ridgid fan 😀

[@Know-How-Now]

You are welcome, Sonnie.

[@PatRick-fe7jr]

Thanks, very helpful. Was looking for tips on how to fix my shower using the pipe wrench, thanks

[@Know-How-Now]

You are welcome, Pat. Best wishes for the shower repair.

[@ardeet]

Exactly what I was after (I’m a pipe wrench newbie). Thanks 👍

[@Know-How-Now]

You are welcome.

[@Anonyhoss]

Thanks for the video! Just what I was looking for. :)

[@Know-How-Now]

You are welcome!

[@invisiblerevolution]

THANK YOU!!!!! Priceless information 😊

[@Know-How-Now]

You are welcome!

[@francoisdastardly4405]

Perfectly developed explanation and demonstration 👍👍👍

[@mosiondz7997]

Simple vid, but rly useful.

[@ChainsawDNA]

Great video. Helped me with my pipe problem.

[@elonmusk8667]

Thank you, I always thought the wrench was broken because it was so loose, ha.

[@Know-How-Now]

You are welcome Sealteam7.

[@인프피도일]

뭔가 끝까지 보게 되네; Excellent video, thank you!

[@Know-How-Now]

You are welcome!

[@susanpolanski4528]

Brilliant! Thank you so much for the clear, easy to understand information. I did learn something new. :)

[@Know-How-Now]

You are welcome, Susan. Happy New Year!

[@susanpolanski4528]

@@Know-How-Now I was able to fix my tub spout and replace the short pipe without having to hire a plumber. Love it.

[@jamesvertrees5857]

I do believe this is the best How to video I have ever seen. Good Job and thank you. I was struggling.

[@Know-How-Now]

Thanks for the compliment. I do my best to make good quality videos.

[@TheYella2000]

Very informative

[@BusinessVoid]

I'm doing some under the table work. I asked what tools to expect to use, i haven't had any experience with some of the tools. Now I can go in not looking completely like an idiot.

[@johnjacobkenny]

I had bought a wrench to help me remove my old shower head. Once I received it, I tried to use it without much thought, just like anyone would pick up any tool. It did not work. I thought either the wrench is broken, or I am dumb. Today I watched your video and it all clicked. 10 mins later, the shower head is replaced! Thank you ❤️

[@Know-How-Now]

You are welcome, Kenny. Thank you for taking the time to comment, I enjoy hearing from people who watch the video.

[@peterbenavides4391]

Thanks that explains alot

[@Know-How-Now]

You are welcome, Peter.

[@roofdogblues7400]

I've gouged the heck out of one of my pipes, and was looking for tips to keep that from happening, hopefully using your tips will do the job, I was definitely resting the hook jaw on the pipe.

[@Jagracoki]

Many thanks! I could not figure out how to use my 24" Trimo. It kept slipping and was whacking my walls causing more damage than good. Now maybe I can remove the pipe without knocking down my walls. This is a very good video; really like the size chart and demo.

[@Know-How-Now]

You are welcome, it's my pleasure to help. Have a great day.

[@byzanttine]

Just what i wanted to know. Very well explained.

[@Know-How-Now]

Thanks for the compliment. I do my best to make quality videos.

[@andreazecchi812]

Excellent explaination! Thanks so much!

[@Know-How-Now]

You are welcome, Andrea!

[@andreazecchi812]

@@Know-How-Now greetings form Rome, in Italy🖐😊

[@Know-How-Now]

I lived in Germany for three years, I loved to visit Italy on the sunny side of the Alps. I did get to visit Rome, though there is so much to see in your beautiful city. I wish I had more time to explore it.

[@MarioDallaRiva]

Very helpful video, thanks!! These wrenches proved to be very useful yesterday. BTW, I think I have that exact older wrench you show in your video. I must have gotten it from my dad. 👍🏻

[@Know-How-Now]

My wrench came from my dad too.

[@PBS-nm1uu]

great presentation thanks for the info..

[@Know-How-Now]

You are welcome. Thank you for taking the time to comment. As many others have done, please consider supporting the channel and subscribe. It's free and you will always be able to find over 200 videos on the channel (If you don't want to subscribe, check out the videos by clicking on the channel name). They are organized by playlist.

[@sekhar9722]

Excellent explanation👌. Thank you so much🙏

[@Know-How-Now]

You are welcome.

[@debjones9538]

Ok, now I know the tool I need. NOT the one my husband was using before his meltdown.

[@robmolin4288]

Great, concise and to the point.

[@Know-How-Now]

Thanks for the compliment, Rob. I aim to keep the videos short and to the point.

[@HollywoodHornet]

Thanks for the video. Since I plan to destroy the thing I'm turning and removing I reckon your technique will work. Pipe wrench FTW!

[@arvindm1946]

excellent review . thank you :)

[@Know-How-Now]

You are welcome, thanks for the compliment.

[@fhmmst]

Very helpful & Thank you.👍

[@Know-How-Now]

You are welcome!

[@JSin5]

Did Jodi Foster narrate this?

[@Know-How-Now]

No, I'm not Jodi Foster, lol, though you are not the first person to ask the question. Thanks for watching the video.

[@sethnotes]

@@Know-How-Now Jodie Foster is from the Delaware Valley? Who knew?

[@AniVono]

Super helpful🎉

[@svenoxtoby4756]

Superb, clear, efficient video. Subscribed.

[@Know-How-Now]

Thanks for subscribing. Welcome to Know How Now.

[@theappaffair]

Nicely explained 😊👍

[@Kelkschiz]

It seems such a brute thing, but listing to you, I've found out it's really pretty elegantly designed :) Thanks

[@Know-How-Now]

It's my pleasure to help. Happy Plumbing.. lol.

[@Kelkschiz]

@@Know-How-Now Bicycle maintenance. One of these bad boys was exactly what I needed to remove my unmoveable seat post. It's all about levers ^^

[@Know-How-Now]

That's a great idea. I had a seat post that was not moved for about 30 years. I treated it with PB Plaster penetrating oil and gave the seat a few whacks with a rubber a mallet. It took doing this once a day for 3 days to get it worked loose, the pipe wrench would have been gentler than whacking the seat with a mallet.

[@onlythetruthfull]

yes, there are two thoughts on this matter as Stilson invented the design with the use of 3 points of contact then it is obvious that is the one to go with three points of contact also ensures an equal straight grip, plus if you have had to undo very tight pipes then the proof is in the use, Rigid make pipe wrenches but on use, they still distort the pipe/tube on very tite threads using only two points of contact. It still stands with all makes you do not ratchet back to get a new grip that will destroy the teeth the pipe and the fitting. For all the doubting Thomases out there then either you have not come across distorted pipes/tubes or you do not have experience in these tools. Like I said a very good video but slightly wrong but still extremely useful to let people know the use of tools, after all, I did not bother to put any video up. So again well done for taking the time and care to help people. which is obviously appreciated judging by your likes and feedback

[@Know-How-Now]

Thank you for your thoughtful and respectful comment. Comments like yours are always welcomed on this channel. I am not offended if someone disagrees with me and like to hear other people's thoughts. Do you have any thoughts why Ridgid would recommend only two points of contact? I am not asking in a way meant to disagree with you or be disrespectful of your opinion. It's a head scratcher that a major tool manufacturer would instruct their wrenches to be used incorrectly. Any chance that if someone used the wrong size wrench it could oval a pipe? One more question if you don't mind, have you ever experimented and tried to oval a pipe using the two point method? Here is Ridgid's instructions that advice to use to points of contact: cdn2.ridgid.com/resources/media?key=32efff83-321f-4065-a5c4-04b77a67bc2b&languageCode=en&type=document

[@CS-bh4ur]

Thank you so much!!!! This videos was so helpful

[@Know-How-Now]

You are welcome, it's my pleasure to help.

[@gauravpoudel7288]

Great explanation

[@Know-How-Now]

Thanks for the compliment.

[@jakel.1724]

Great job very nicely explained. Keep it going bud

[@Know-How-Now]

Thanks for the compliment Jake.

[@pradolover]

These are called Stilsons in England, I always wondered where the name comes from! Thank you.

[@Know-How-Now]

You are welcome, Stuart. Thanks for watching the videos.

[@sergiogoicochea8272]

My dad used a stillson ridgid 18", I missing you Dad

[@oriiion8]

Wow. Learned allot. Thank you.

[@Know-How-Now]

You are welcome, Samuel.

[@rustyzi345]

I did find this video helpful. Thank you.

[@Know-How-Now]

You are welcome.

[@sweeperzero1125]

Ah yes The Adrian Shephard's Favorite Weapon

[@josefcartelet8624]

also, it's Jack's melee weapon used as Last resort... or else, we have Plasmids & eve!

[@tracylokstadt4294]

Great information for green recruits to the trade. This breaks it down to small bits of information making the information more easily absorbed. Thank you. #TrainBuildSuccceed

[@Know-How-Now]

You are welcome, it's my pleasure to help.

[@TilankaDil]

Thank you...

[@Know-How-Now]

You are welcome.

[@seanmcow]

Very interesting!

[@brettkelley5583]

Awesome video. Great info. Thanks!

[@Know-How-Now]

You are welcome, Brett.

[@nowthenad3286]

That was an excellent video. Thank you. I have subscribed.

[@Know-How-Now]

You are welcome. Welcome to the Know How Now channel.

[@JP-kg6wn]

Thank you very informative. 👍

[@Know-How-Now]

You are welcome.

[@petercolbourne7344]

Really useful, thank you!

[@Know-How-Now]

You are welcome, Peter!

[@kh2945]

Useful video!

[@arabgamesandtech2272]

Thank you so muuuch

[@Know-How-Now]

You're welcome

[@fredh54]

This video is pretty good but did not mention a technique that is a must when using either a pipe wrench or a Crescent type wrench- a 3 point bite. You show both the fixed and movable jaw around the pipe but there is space between the jaws and the pipe at the top. Open the jaws slightly. The movable jaw should touch the pipe in 2 locations. What difference does this make? If you apply enough effort to a very stubborn pipe, maybe even with a cheater bar on the wrench, you can take the pipe out of round and make it oval in shape which makes it even more difficult to remove. Using a 3 point bite will prevent you from doing this

[@Know-How-Now]

There are several discussions on this topic in the comments. You will find a link that I have added to Rigid's web page that tells you not to use the technique you describe. Some people cite the This Old House Video that uses your method. I chose to go with the instructions from the manufacturer's engineers who design pipe wrenches. My thought is that the 3 point method may have been the correct way with older Stilson style wrenches. Thanks for the thoughtful and tactfully presented argument, it is appreciated.... there is not much of it these days on the internet. You are a gem. cdn2.ridgid.com/resources/media?key=32efff83-321f-4065-a5c4-04b77a67bc2b&languageCode=en&type=document

[@jefflips8189]

Like and subscribed! Great video

[@Know-How-Now]

Welcome to Know How Now, Jeff! Thanks for watching the video, commenting and subscribing.

[@TealCheetah]

Here after helping dad get pipe wrenches on a vertical pipe

[@abdel-hadikaddour8400]

Thanks very mache

[@Know-How-Now]

You are welcome.

[@IntrepidArcher]

Good video. Thanks!

[@Know-How-Now]

You are welcome!

[@quitefranklybb]

Great video!

[@Know-How-Now]

Thanks for the compliment!

[@polyushkopole5292]

Only woman can explain in a correct way what men fails to do everytime

[@OthmanAlikhan]

Thanks for the video =)

[@Know-How-Now]

You are welcome.

[@starbai410]

I thought it was suppose to make three point contact so it doesn't start to square to side of the pipe with all that pressure

[@Know-How-Now]

There seems to be two school of thoughts on how to position the wrench. I went to the Rigid's (major manufacturer of pipe wrenches) website. Their instructions tell you to position the wrench as a show in the video. I'd think that if you design and sell the wrenches, you wouldn't tell people to use them in a way that would crush the pipe. If anyone has input on the topic, comments on your experiences are welcome.

[@Taylor-xh8uh]

@@Know-How-Now well that's not a rigid pipe wrench doing it like that will take the pipe out of round

[@MsThylacine]

Good question- just saw the "This Old House" how to use a pipe wrench and he says 3 point contact. Geesh- even the experts can't agree. What to do??

[@Taylor-xh8uh]

@@Know-How-Now yours isn't a ridgid

[@Know-How-Now]

Taylor, can you explain how a Ridgid brand pipe wrench is mechanically different than other brands? Here' the link to Ridgid's document: www.dmp.wa.gov.au/Documents/Safety/MSH_ProductSafetyAlert_Ridgid_ProperUseOfPipeWrenches.pdf

[@unclematt3]

This woman has a sexy, Jodie Fosterish voice, and she knows what she's talking about. Well done!

[@abdel-hadikaddour8400]

Bonjour madame Svp esq un jour vous pouvez nous produire une vidéo pour parler d'un autre modèle de clé a griffes (( model diagonale)) dit aussi (( clé a griffes d'extrémité)) en acier matrice pour usage intensif, j'ai impressions que ce modèle ce le plus solide au monde, merci bon continuation madame

[@johnathonnichols]

They way you show of using the tool can ruin the pipe by crushing it into a oval shape. The pipe should go deeper into the wrench so that contact is made at three points instead of only two. Excepting that overlooked point---nice video.

[@Know-How-Now]

Thanks for commenting. There is some difference of opinion regarding two vs three points of contact. I checked with Rigid, they tell you not to use the three point of contact method. They design and manufacture pipe wrenches, so I went with the two point method. Often, there is more than one way to do something and both ways could be correct.

[@stever5887]

I agree with the other reviewers about three-point contact. Check out what Rich Trethewey of "Ask This Old House" recommends in his video, which is the three-point method. The reason is that by only using the two-point method, you will oval the pipe, which can make it difficult (if not impossible) to remove the pipe later if necessary. I would suggest that you contact Ridgid again and ask them if it's possible the information provided was incorrect. If they claim the earlier explanation is correct, ask them for a detailed response regarding why the two-point method is superior. Either way, please share that information with us, as the two-point method goes against everything I've heard and experienced. Thanks.

[@u2311h]

@@stever5887 There's a bulletin put out by Ridgid entitled "Proper Use of Pipe Wrenches " that states the following: "When using a pipe wrench of any size, a gap must be maintained between the shank of the hook jaw and the pipe itself. This permits the pressure of the two gripping points (the heel jaw and the teeth of the hook jaw) to produce the gripping action of the wrench. Allowing the back of the hook jaw to contact the pipe greatly reduces the gripping action of the wrench and can cause the wrench to slip. It may also result in the failure of the hook jaw. Maximum grip and turning force is developed by maintaining a gap of approximately 1/2″ (12mm) between the back of the hook jaw and the work piece."

[@2k3r11s]

@@stever5887 Ridgid's pipe wrench usage guide *does* explain why the two-point method is better. They suggest that grip and turning force exerted is greater when the neck of the adjustable jaw is close, but does not touch, and that touching the neck can cause slippage and potentially damage the adjustable jaw using the 3-point contact method (since the third point of contact on the adjustable jaw neck would present a lateral force to the neck not present in 2-point contact). I agree with @Know How Now - there is clearly polarizing conflict of opinion on this topic, even among professionals, which itself is fascinating given how long pipe wrenches have been around. Given the cam action inherent in pipe wrench functionality, if sufficient force is applied to crush the pipe it is not clear that the third contact point would prevent deformation, although it does appear that it might brace one side of the pipe from bulging out (but not the other side). Perhaps this subtle advantage on certain softer metal pipes is more advantageous than the additional grip that the two-point method provides, and makes it the better approach in certain circumstances. I suspect that there is a strong element of tribal wisdom at play here that has passed down both techniques over time, based on what works best with different pipes and different wrenches. It's possible that three-point contact does work better on certain materials, or when the center teeth of the wrench start to wear down, or when lack of grip is not an issue, or in a variety of other circumstances. At the end of the day, one thing is undeniable - the neck of a pipe wrench is designed to be able to move laterally (perpendicular to the force that the jaw applies to the pipe) to provide cam action - cams do not work without room for this lateral motion. It is quite clear that contact with the neck prevents this lateral motion of the pipe within the jaw and would not be able to grip with as much force.

[@alinnimeni3789]

Seen this comment now.....ive seen the 3 point method and in theory sounds better,but in practice with that method you cant remove the wrench so easily as shown here,it stucks.....using the 2 point method you can remove the wrench easily as shown here....

[@latestbuzz5066]

Thanks man ❤️

[@Know-How-Now]

You are welcome.

[@king0vdarkness]

any chance you can do some more videos on tools like: how different pliers/torque wrenches/sockets/rachets work/are used?

[@Know-How-Now]

I have a video on how to use a Harbor Freight torque wrench. kzbin.info/www/bejne/pqKpd4R4qL99rKc

[@corygriffiths4394]

I’ve got some pipe wrenches the largest pipe wrench I have is 36 inches.

[@capn1600]

Richard the plumber on this Old house says the exact opposite of what you said. He says you should always have a three corner bite on a pipe so that you don’t take it out of round and you said just grip it with teeth two points of contact

[@Know-How-Now]

Hi Steve, there have been several discussions in the comments about 2 or 3 point contact. I consulted Rigid and they recommend the method shown in this video. They make wrenches so I went with their advice. There are several links to that document in the comments. My guess is that the wrench design has changed and the two point method is something that applied to older design of wrenches and it continues to be taught.

[@tonyswhirl]

Stone smooth - thanks

[@Know-How-Now]

You are welcome.

[@karolynsanford7857]

Thank you! I feel better about using my new pipe wrench now. I've been trying to open my sewer cleanout with a pipe wrench, but I'm hearing from the video that that is the wrong tool for the job. What is the right tool, and how do I use it to open the sewer cleanout?

[@Know-How-Now]

You might try something like this: www.homedepot.com/p/Camco-RhinoFLEX-6-in-1-Sewer-Cleanout-Plug-Wrench-39755/207160401

[@karolynsanford7857]

@@Know-How-Now Thank you!

[@sirchdreams1221]

thank you so much!!

[@Know-How-Now]

You are welcome!

[@gogaton]

great video thanks

[@Know-How-Now]

You are welcome, Jes. Thanks for the compliment.

[@Vorheesplays]

I feel like i remember a marine wielding this

[@commonerIndian]

nice thanks

[@Know-How-Now]

You are welcome.

[@teebu]

"This old house" channel says use 3 point contact, otherwise you may make your pipe oval if you put too much force on it.

[@Know-How-Now]

Below is a link to a document from Rigid, a manufacturer of pipe wrenches that tells you how use a pipe wrench and it's not the way shown on the This Old House video. There does seem to be controversy on the correct way. Over the years the design of the wrenches has evolved. Perhaps that has changed how the wrench is used. Some folks have added some insightful comments. I have to go with the the people who design and sell the wrenches method. www.dmp.wa.gov.au/Documents/Safety/MSH_ProductSafetyAlert_Ridgid_ProperUseOfPipeWrenches.pdf 2

[@king0vdarkness]

4:11 To remove the bite marks you can wrap the nipple joint in a cloth?

[@gwjuggernaut]

Good

[@abdel-hadikaddourn2bricola725]

Tenk you. Félicitations madame

[@Know-How-Now]

Je vous en prie.

[@SheepDogNumber6]

Thanks!

[@Know-How-Now]

You are welcome!

[@Morichika_Rinnosuke]

"Who touched my wrench" -Adrian Shepherd

[@vijaysidana3217]

thanks for the video . mam, please make a video on pipe vice.

[@Know-How-Now]

You are welcome, Vijay. Thanks for the suggestion for a video.