KOCHCHEMIE P6o1 (all in one )

[@carlphillips3399]

Koch chemie is my go to compound without a doubt. If you are getting dust then you are using too much compound or not cleaning your pad regular enough.

[@serranosmobile]

Facts

[@jerryguillaume6435]

I'm pretty new to paint correction and I’ve been doing some research on the best all-in-one polish and P601 and 3D speed are the best so I have watched so far from all the KZbin videos. What foam pad do you use with P601(besides the orange pad) and if you use 3D speed what pad would you use?

[@serranosmobile]

I use rupes yellow foam

[@serranosmobile]

Diy use 3d much

[@dwayneelroy8888]

Thank you bro. Great timing too.

[@serranosmobile]

🙏🙏

[@robertfranklin1311]

3d one would have been awesome on that paint. Use it with a uro fiber 50/50 pad its 🔥🔥

[@ct181]

I would recommend air or a pad brush to keep the product from clogging up the pad. Just a recommendation not trying to slam you

[@serranosmobile]

Oy yes I keep those on me all day

[@serranosmobile]

Usually vortex air tool at 45 psi to blow them off. But I also carry like 12 pads to correct

[@Hearts4cloudss]

Hi mate, thanks for your video ,what is the cycle time for P601?

[@serranosmobile]

@Hearts4cloudss last up to 1 yr

[@MrKingsniper22]

Are you using a D A polisher or rotary, forced rotation d a? Let me know please thank you for this video. I just purchased the P602 with the orange pad. I’m looking for a polisher

[@serranosmobile]

DA POLISHER

[@ddautodetailing]

Thanks for sharing with us!

[@serranosmobile]

Thank you

[@joaquinmireles3912]

Ive ysed and its a plot sealnt wa very impressed with the bottle was to little gor my use

[@serranosmobile]

I agree

[@alserrano5140]

Hi Carlos. Would you use it with a lake country SDO orange pad? Thanks. Great work. 🙏🙏🙏🙏

[@serranosmobile]

Yes I would

[@alserrano5140]

@@serranosmobile Thank you 🙏

[@Alexey-fl7bp]

Do you mind sharing how you deal with the stripes on the hood and the trunk? Those are stickers, not paint, right?

[@serranosmobile]

So many ways one is taping the edge of stickers so the polish doesn't stain. As for me I polish over them and haven't had any issues

[@ryanramil7281]

Would you recommend using this to remove heavy etched water spots?

[@serranosmobile]

Hmmm haven't tried it yet

[@TheCeki1982]

Get a cheap bottle of Megs Ultimate Compound for this job, apply with your da or by hand followed by an aio.

[@verduzcoautodetailing3183]

Will this work to polish and protect boats?? I got a job coming up and doing some research on what to use

[@serranosmobile]

I believe it will, it's not labeled for boats but in my opinion only a coating will be best

[@verduzcoautodetailing3183]

@@serranosmobile which coating would u recommended? Along with a good polish to remove oxidation?

[@serranosmobile]

@verduzcoautodetailing3183 when it comes to boats I'll go woth rotary on wool pad with kochchemie h9 then followed by f6 by kochchemie f6 on a rupes yellow foam pad. coating I have used drive auto appearance seal. but any marine coating will be good

[@verduzcoautodetailing3183]

@@serranosmobile appreciate you brother🙏

[@Icanexplainbro]

Would you recommend this to polish a brand new car with little to no swirls?

[@serranosmobile]

Definitely

[@richardrodriguez4114]

have you tried 3D One. i’ve heard good things about it. I’m looking for an all in one for light to moderate defects

[@serranosmobile]

I have it did well, I think kochchemie does better for me, but again I'm just an opinion

[@robertfranklin1311]

3d one is very good

[@serranosmobile]

@@robertfranklin1311 yes it is

[@MyNameJeff-ck4sb]

Great video. What light and tripod is that?

[@serranosmobile]

Hyper tough from Walmart, cheap tri pod from Amazon

[@MyNameJeff-ck4sb]

@@serranosmobile thanks! Looks like a nice setup for paint correction

[@serranosmobile]

Tripod I'd from Walmart lol my bad thr light tri pod

[@TopTierDrivers]

will it clean up enough to ceramic coat after? if I use the heavy cut do I have to follow with the microcut?

[@serranosmobile]

Do this p6o1 is not made to use for coating as it has fillers. Now u can do F6 paired with micro cut and will look amazing. But f6 does amazing alone at times

[@TopTierDrivers]

@@serranosmobile does koshchemie have a 1 step corrector before ceramic coating?

[@serranosmobile]

F6 or m302

[@TopTierDrivers]

@@serranosmobile will i have to use an eraser or remove the m302 wax after correcting before applying ceramic? I read it’s also a polish

[@serranosmobile]

Always IPA after

[@chavezcustomdetailing9540]

You know with that product I have a love hate relationship. It’s great for a quick paint enhancement but it’s not a enjoyable as HD speed. That’s my opinion but it is what is Mr. Carlos.

[@serranosmobile]

Definitely love the feedback 🙏🙏

[@1stfrompuertorico568]

Aquí tu primo caribeño bendiciones 👋👍🙏

[@HooksetAnglers]

So you didnt have to apply any wax or sealant?

[@serranosmobile]

Correct

[@HooksetAnglers]

Also did it add any fillers or is actually correcting

[@serranosmobile]

@@HooksetAnglers no fillers

[@HooksetAnglers]

@@serranosmobile bet how long do you think the sealant last

[@serranosmobile]

@@HooksetAnglers if maintained 8 months

[@JuanRamirez-gm9kt]

How long did that job take you?

[@serranosmobile]

4hrs

[@GaLaxY-1905]

Is 250ml enough for a car

[@serranosmobile]

@@GaLaxY-1905 yes

[@beeslandscaping]

I noticed all your cars you never tape anything off what’s the reason behind that!!!

[@serranosmobile]

I don't tape due to my always cautious and I use a mini to get on the edges

[@Carlos.Rivera]

@@serranosmobile it save time?

[@serranosmobile]

Lot's

[@stephenwhite5444]

With a da you dont really always need to tape off, it depends on the product. Some products dont mark up the rubber like others

[@rajvitela]

American for life 🇺🇸

[@serranosmobile]

Amen 🙏

[@NickVetter]

I bought a serrano pepper plant today

[@serranosmobile]

I have been wanting to buy one 🤣

[@robertfranklin1311]

1st from Kansas city mo

[@serranosmobile]

Thank you 🙏

[@hifibloke]

koch not coach 😊

[@serranosmobile]

Thank you

[@404notfound.....]

Just re-watched this video. Will be using this product this weekend. Great video Brother!! 👍🏻🏆

[@ricardoalexandre9308]

Nice job serrano…. This stuff is amazing results

[@serranosmobile]

Thank you

[@1stfrompuertorico568]

1st