The BEST All-In-One Polish we've found!

[@Esotericdetail]

If you're looking for more detailed information on how to be better at paint correction and ceramic coating, then check out our new ONLINE training at: www.esotericdetail.com/education

[@paulintile]

Love your no-bullshit approach to these vids. You’re concise, and always cover all the bases necessary.

[@TKTampa]

LOVE this product. It's my go to for a one step. You will be surprised how much cut you can get out of it and the gloss level blows away the rest of the AIO products.

[@peterjurenovskis5933]

Good pointer on pre-placing the drops of product across the panel to save time. TY

[@AR-rs2dy]

Your videos are the best. The explanations are simple and great for beginners. Keep it up.

[@Esotericdetail]

Thanks, and glad you liked it!

[@J1Z06]

I love this channel. Todd is a great guy. No bs! Gets right to it.

[@andrebassick4360]

Thank you, this was so very helpful in understanding this new product. I so appreciate how you explain not only how the product works, but also how you would use it at your shop. Your real world examples are very helpful.

[@Esotericdetail]

Thank you, and glad to hear that you enjoy the videos!

[@dappergent9422]

Excellent video and no nonsense overselling. The bottom line is that swirl marks are inevitable, no mater how many times you polish your car. They always come back.

[@chrisoo8998]

This is perfect for qik clean up job I done my work truck come really good sure there was some defects left but come up really smooth and glossy

[@davidortiz6173]

Thank you for your advices, greetings from Colombia

[@jonbravo9278]

I detail for a living. For the money it's hard to be Meguiars Cleaner Wax line. They have a ton choices and they have AIOs for 12 bucks. UNO for 3x the price isn't 3x better.

[@dontworry7113]

Just used it yesterday leaves no mess easy to wipe off amazing product!

[@georgemyers6518]

Spectacular product for main stream daily driver cars and used cars. I like using it with the Rupes yellow medium cut pad on my LHR MKIII polisher. I blow out the pad with an air gun in between every panel

[@Esotericdetail]

You'll find it even more effective if you change out your pads completely multiple times during the process. It's not just what's sitting on the face of the pad, it's also how saturated the pad gets inside.

[@pacpremiumautocleaners9396]

We love Rupes UNO Protect too. Great video here!

[@bikerider5296]

I would love to hear your thought on Rupes Uno Advanced. It sounds like it might offer a decent amount of protection.

[@Tops1212]

This new Rupes AIO, is getting awesome reviews. May have to pick up a bottle in the new year.

[@Esotericdetail]

Just give us a shout when you're ready!

[@lead-dog]

Thanks. Great video! Honestly, so much great and useful information in the first 5 minutes alone. Amazing!

[@Esotericdetail]

Thank you...glad you liked it!

[@rickyrice7376]

Excellent video Todd. Great concept. If I’m not selling paint correction for a customer. It’s a great alternative. Thanks Todd. Always Prefessional.

[@RUGQBIFF]

Great point pre applying compound on each panel. Every minute counts.

[@RUPES]

Fantastic video guys!

[@Esotericdetail]

Thanks, and thanks for the great product!

[@visker81]

If you sponsor me I'll do a positive video too.

[@RUPES]

@@visker81 well, they're not sponsored, they are an authorized distributor of our products 🤷🏽‍♂️

[@Esotericdetail]

@@visker81 Correct...we do not do sponsorships!

[@dontworry7113]

RUPES amazing product way better than chemical guys and 3D

[@ELEDUCADITO1]

Simply amazing guys. Thank you for the instruction

[@marybetheby5184]

Wow!A product i have used before Esoteric!It is good stuff.

[@jaykid007]

Lol probably used it long before

[@marybetheby5184]

@@jaykid007 Yeah,,he is in with this company.Just weird seeing a vid with him showing a product AFTER i used it!😂

[@jaykid007]

@@marybetheby5184 very nice great product for sure! I'm trying the koch chemie line soon as well

[@jaykid007]

Like the idea about place dots on the areas to polish so don't have to stop.

[@404notfound.....]

Great video! This product is excellent For paint enhancement and correction. It's on the list.

[@Audittr2108]

I decided to try an AIO combined with the yellow Rupes wool pad earlier this year as I only had minor swirls having corrected previously (UNO Protect wasn’t out yet). On medium/hard paint it gave excellent results then topped with a spray SiO2 sealant after the next wash a week later. I took my time with each polishing set but it still took only half a day and I was done. No IPA wipe downs after and moving on to protection stages. I’m going to get my hands on some Uno Protect to try next time. An AIO enhancement is all I need and you have to remember that a car has only so much clear coat so a full polish year after year isn’t a good idea.

[@cburgz3697]

Awesome video, answers EVERY question I had!

[@steve1700]

Good video Todd. Can't wait to use it.

[@MikeBee77]

I am going to polish a Tesla which has soft paint with the yellow wool and Uno Advanced, do you think this would be a good idea since it is soft paint?

[@richardtregonning954]

Love u videos thank u for the great advice u always give keep up the good work and stay safe from Richard in the UK ❤️

[@Esotericdetail]

Thanks so much

[@mikeeonfiya]

Typically, would you need to decontaminate before using an AIO for single stage paint? Thanks in advance!

[@nicksdragon6929]

Great explanation on how the product works especially showing how it can be used with the three different pads and that it is a fast finish product that looks to be just what the Doctor ordered. This is really something I will be using because the older I get the less I want to do the heavy corrections and I enjoy doing the polishes that make it look like a million bucks. Question though on the coating part, because most of my polishing is prep work before coating. So, is this more for a car that currently has a coating but it's older or is this more for a car that doesn't have any coating at all and we're just going to use a spray coating after the polish for maintenance to the protection that's just been applied? Is that because of the fillers? Is there a book you can recommend that explains the ins and outs of polishing? Thanks for all you do for us.

[@Esotericdetail]

Thanks for the positive feedback. If you're working with coatings, this is not the product for you because it contains 3 different kinds of waxes / protection in it and your coating will not bond. If you're doing a quick prepping for a coating, then you'd be more interested in their Uno polish, which has no protection in it. There's no book(s) I can recommend on this subject, as it changes rapidly. Perhaps one of our classes might be well suited for you! www.esotericcarcare.com/training/

[@nicksdragon6929]

@@Esotericdetail Great idea, but I checked flights and Ohio has a two-week quarantine for those of us coming from California. Maybe next year. Thanks for the advice because I think you and Brian at Apex are the two I respect the most for your knowledge.

[@BB_Detailing_00]

Tip: this is good for clients who say, "I want it to be shiny and smooth." Those people don't generally care for 100% defect removal. Todd: good video. Good product. Used it once so far. And thanks for dropping the price on the "older" Rupes yellow pads! I got 6 of them. My friend tried to order but looks like got most of what was left. Oops.

[@Esotericdetail]

Correct...there are MANY levels of polishing when it comes to solutions that you offer to customers. Too many detailers think there are only 2 options...wash on one end of the spectrum, or "full" correction. We definitely promote the Good / Better / Best system so that you've got something for everybody.

[@BB_Detailing_00]

@@Esotericdetail keep it simple :)

[@alexisamtosta]

You cant get 100% defect removal either. But it is crazy how much you can correct with a one step polish with cutting pad.

[@J1Z06]

Most people around Me want ceramic coating jobs but for very little money. I like doing the whole 9 yards, buffing, coating, etc. Hmm, this could be a good option for those that have limited funds. Thanks, Todd. I hope You’re well, safe/healthy.

[@Andresthebigkat]

What was their rate they were seeking for the coatings?

[@J1Z06]

@@Andresthebigkat They thought $400 was too expensive.

[@Andresthebigkat]

@@J1Z06 for a coating plus buffing that is a damn good price! Where do you live at?

[@winogod917]

None of the this n that, what if you try.... direct and straight to the point. If only all KZbin videos on products by others are like this. As a diy er, rupes duetto rupes yellow pad and sonar finish polish. Possibly use this product the following time....

[@SwavyDetails]

So do you still have to clay bar the surface for prep ?

[@Esotericdetail]

Only if it needs it.

[@SwavyDetails]

@@Esotericdetail thank you for replying I’m ordering some for sure for a f-250 to do and this would be perfect I assume

[@tier1detailcompany]

You mentioned this as a good product for mobile detailers, curious how it behaves in sunlight. Does it stain plastics, and does it have a good wipe off in the sunlight?

[@Esotericdetail]

The comment about mobile detailing is more centered around the ability to do it quickly.

[@tier1detailcompany]

@@Esotericdetail gotcha thanks!

[@coreykeyz3471]

I’m a mobile detailer and I use this weekly. In direct sunlight in 80-100 degree heat. Doesn’t matter. Easy wipe off no matter what

[@elevatedshine]

Great product, perfect for mobile detailing. Don’t have to wipe off until completely done. My entry level service. Plus the wipe off is a breeze

[@aldenmartinez6842]

Is it ok in the sun to not wipe off immediately?

[@MindbodyMedic]

I’m a total noob and have picked up makita PO6000C and Perfect finish for DA. Is perfect finish enough to achieve 95%+ defect removal? Which pads do you recommend? Looking at lake country v rupes pads.

[@Esotericdetail]

Depends on a lot of variables...the paint condition, paint type, your skill level, and techniques used. I'd team it with Rupes yellow polishing pads. Being new, you should be really happy if you can achieve 50% correction.

[@MindbodyMedic]

@@Esotericdetail thanks for reply. its on a car that's never received any correction at all&horrible sponge car washes, so pretty bad condition. ok so I've narrowed down to rupes yellow vs buff& shine 5050 microfiber. still stick with rupes? I'm using this car as a practice piece because it has little value.

[@Esotericdetail]

@@MindbodyMedic For polishing, stick with foam pads...jump to microfiber pads when doing a 2-stage.

[@MindbodyMedic]

@@Esotericdetail thanks! I just gave it a quick run on some panels with a cheap foam pad as I'm waiting for post. very impressed at swirl removal. I can see why this game is addictive!

[@garcia5986]

i use that after all compound(heavy or not) it is my favorit ''polish''

[@markmoore6264]

Great video with plenty of information .

[@Esotericdetail]

Thank you!

[@fokanerantsieng4642]

I like this product. Just wondering if you could apply by hand just in case

[@Esotericdetail]

You could, but you've have limited results / performance.

[@patrickpeterman4890]

VERY GOOD VIDEO AND INFO; MUCH APPRECIATED,PATRICK.P

[@Esotericdetail]

Thank you Patrick!

[@achkc]

really interesting. in a previous video on how to polish he mentions "if you ever are learning from someone who puts polish down on the paint to pre place it then walk away they don't know what they are talking about." 5 minutes into the video he talks about doing exactly that.

[@Esotericdetail]

Completely different kind of polishing and polish...

[@achkc]

@@Esotericdetail with all due respect...I've never seen a difference in paint correction results whether I put polish on the pad first (after primed) or on the paint.

[@tomasaro4910]

I really like your videos they are very informative and easy to understand. The only problems is that you making me buy more car detailing products. Last buy was the Rupes Uno pure Because I don’t want protection in the polish compound. I just bought sonax cutmax, cut and finish, perfect finish and also the two new Rupes D-A gel fine and coarse. You also made me try and buy the new Rupes foam line with the new yellow, blue and white foam. Also the Yellow wool for more cut. I will be correcting a Audi SQ5 red 2015 and wonder were to start? My plan is yellow wool and perhaps blue Rupes D-A coarse gel or should I go for the Sonax?

[@Esotericdetail]

Sorry I am costing you money, but they're all good investments! As for the Audi, you just don't know until you start to do your test sections.

[@Admin-ie9hp]

Does this have UV blockers as well

[@MiataPower96]

To go around the whole car in 30 minutes you mean with employees correct? Or is that 30 minutes possible to do solo?

[@Esotericdetail]

Solo!

[@polesdehid]

how to clean and polish around the emblem car? should I take off the emblem to polishing the body car? Thank you 🙏

[@Esotericdetail]

Not on a quick detail like this, but in a more comprehensive paint correction detail, it's the best way.

[@polesdehid]

@@Esotericdetail could you please make a content for this matter? Thank you 🙏🙏🙏

[@arnold4340]

Great video, I’m actually looking for polish with a protection, this would be a great product, can I use rupes uno every 6 months?

[@markzl1608]

First time I’ve seen this product but if it’s doing any correction/cut then I wouldn’t do it every 6 months. This would take thin layers off your clear every time you use it. No big deal if you do it 2-3 times but I imagine 4-6 times will start stripping away your clear coat more than you want. Still, I’m just speculating.

[@Esotericdetail]

If you feel you need to do correction every 6 months, then you need to work on your washing / drying methods. You may want to do this (maybe) once per year. You could decontaminate the paint, then use Rupes Uno. For the rest of the year, you can apply some kind of sealant / wax / etc to protect it since the protection in this product will only last a few months.

[@arnold4340]

ESOTERIC I have a soft paint, I have 7 wash mitts in one bucket and normally wash car every week, I would probably improve washing and drying methods, thanks for the advice👍

[@ahmeda3227]

@@arnold4340 your car needs to be ceramic coated Soft paint and constant polishing will ruin the clear coat in less than 5 years You need ceramic coating Do your wash, decontaminate, 2 or 3 step paint correction, ipa wipe down, then ceramic coat After a week wash the car and apply a ceramic coat topping spray sealant with every wash as drying aid And enjoy flawless and protected paint for 2-4 years after 3-4 years you can polish and reapply ceramic coating

[@ahmeda3227]

@@arnold4340 oh and use ceramic coat safe car shampoo for your washes

[@user-bf6go9nf6g]

Outstanding video, I learned a lot. I’m looking for an all in one to clear up some light wash induced marring. Would Uno Protect work well on Tesla paint ( grey model 3)? Thank you!

[@Esotericdetail]

It would work fine on light marring!

[@milla5920]

Nice video Todd. Seeking your expert advice on UNO Prime Protect. What is the different with UNO Protect? Thank you.

[@Esotericdetail]

Prime Protect is designed to be used before ceramic coatings.

[@Belle1337]

So this is better than Sonax Perfect Finish?

[@tomasaro4910]

Perfect finish will cut more.

[@Belle1337]

@@tomasaro4910 I know that already. Esoteric however, states that this is the new best one step polish.

[@tomasaro4910]

Belle1337 ok, then you also know that Sonax Perfect finish isn’t a AIO? So why are you asking about a AIO and it it compare to a polish compound? It is like comparing an Apple to a banans? They are two totally different products. It is silicon in this product which I don’t like but Rupes also have the Uno pure ultra finishing (it have not protection in it). I really would like to see a review of that instead of this one.

[@weaverdetails4747]

Any pad staining issues?

[@Esotericdetail]

Different animal. Sonax is an intensive one-step...this is a quick all-in-one. They're for two completely different processes.

[@halimxxii]

Sir, do you clay the paint first?

[@Esotericdetail]

Only if needed...

[@rhooks01]

3d has had a product called the one thats been out a couple years that works awesome I've started and finished cars with it just change the pad.

[@Esotericdetail]

That's great, but not really what we're talking about here. An all-in-one is a different animal altogether.

[@jamesbrowne9959]

Great video as always. How much of the correction seen in the 50/50 do you think is from the product filling imperfections vs removing them? I imagine with some of the gloss enhancers and such could possibly be making some the imperfections. Thanks for any feedback.

[@Esotericdetail]

James. Here's a better question...when doing this level of polish, does it really matter? This is for making a nice difference, in a really quick process.

[@coreykeyz3471]

There’s no fillers in uno protect. What you See is what you get

[@Sims746]

Tod, how do you compare this to sonax perfect finish? Very informative 👌

[@Esotericdetail]

Two completely different uses. Perfect Finish is for either an intensive one-step polish, or a finishing polish. Rupes Uno Protect is a quick all-in-one.

[@Sims746]

ESOTERIC answer that i was looking for👍 Thank you Sir👌

[@404notfound.....]

Just ordered a bottle of this yesterday. Todd what pad would you use from the Lake country foam line up.. Would it typically be a black finishing card or white polishing pad?? And what is the preference for a medium cut one-step finish. Tks

[@Esotericdetail]

@@404notfound..... Well hopefully that order is coming from us! :). We don't use LC, but most likely a polishing pad. For a solid one-step, Perfect Finish is the way to go.

[@dnetsuj]

@@Esotericdetail Hey Todd, would Rupes Uno Pure be comparable to Sonax perfect finish then? If not, what are the differences?

[@vasts1479]

I bought my car one year ago and protected the paint and maintain it from day one. I do have some lights swirls that I want to correct (or temporarily cover). If I apply this product by hand will I get satisfactory results? Thank you

[@Esotericdetail]

No, you will not...

[@vasts1479]

@@Esotericdetail I appreciate your honesty. Thank you very much.

[@nosyhulk6863]

Can I still use Ceramic coating after using this product to polish?

[@Esotericdetail]

No, they are not compatible as this product has protectants in the formula that would prevent a bond of ceramic coatings.

[@EstebanSDMX]

Is this product save working in direct sunlight?

[@Esotericdetail]

I wouldn't recommend working with any polishes in direct sunlight.

[@TurnerMobileDetailing]

What kind of protection is it leaving behind? A polymer wax, or a SiO2 based sealant?

[@Esotericdetail]

A combination of polymer and traditional wax...

[@billbuss7542]

Do you follow this with a wax or sealant?

[@Esotericdetail]

No...it's already in the polish!

[@gelahascue]

If you are going to put it into percentage, how much % of removing defects would you say this Uno Protect did? Lets say using the Fine Yellow Foam pad

[@Esotericdetail]

It will vary greatly from paint to paint based on the hardness level, and the condition.

[@noel3466]

Why is polish white mines purple and dyes my pads

[@KaiSongSee]

Is this better than sonax perfect finish? Im new and would like to start with a great one step

[@Esotericdetail]

They are in different categories. Sonax PF is an intensive polish, with no protective properties. This is a light polish with protection added in.

[@djdny8764]

is it possible to do this job with a rotary polisher?

[@Esotericdetail]

Possible? Yes. Practical? No. You can blaze through this with the DA without any worries of holograms like you would if you were using a rotary that fast.

[@xianreiss]

What would you recommend if ceramic coating after polishing?

[@Esotericdetail]

If you mean what polish, then it would be something like Sonax Perfect Finish. www.esotericcarcare.com/sonax-perfect-finish/

[@LKN4WAR]

How does this compare to Uno Advance

[@Esotericdetail]

Advance is the premium of the two: kzbin.info/www/bejne/kHzblpStjNlorZI

[@danielstyrczula3168]

Just placed my first order with Esoteric today. Bought my duetto polishing kit and this product . Do I need to add any protection after this product or sonax perfect finish ?

[@Esotericdetail]

Thank you for your order. If using this product, you do not need to add any because it's already in the formula. Perfect Finish is a pure polish, and you would need to add protection after using it.

[@agoodbogey]

Can I use a finishing wax for more gloss after using this rupes product?

[@Esotericdetail]

You could if you want to, but the chances of "increasing the looks" by putting something on top of it are slim.

[@agoodbogey]

@@Esotericdetail i appreciate the response I probably won’t then. My wife car is from 2017 but it always stays in the garage so I don’t think it’ll need much correction.

[@johnj3052]

would this be a one step or quick machine polish?

[@Esotericdetail]

This would be a light machine polish...

[@kylegeldmaker]

I feel like I might be using this product incorrectly or something. I've used about 2 of the 1000 ML bottles so I think I have decent experience with the product, I use a Griot's G9 and Rupes Medium wool pads every time. I use the wool pad for slightly higher cut without having to finish with another pad. Every time I use this, I expect to get a better cut than I do. It does return gloss, clarity and I like the sealant - but it's really disappointment, sometimes, to spend 1hr+ polishing a vehicle and still have swirls and water spots, especially defects that I consider superficial. Do you have a recommendation on pad for 80% percent defect removal without having to polish? Maybe my expectations need to be adjusted. Thanks.

[@Esotericdetail]

You're trying to cheat physics, which is where your disappointment is coming from. High level of correction and high level of finish isn't achieved in such a small amount of time. Correction, Finish, Speed...pick 2!

[@kylegeldmaker]

@@Esotericdetail Thanks for your reply. I shouldn't be able to expect superficial swirls and light etching/waterspots to be removed with this and a wool pad?

[@Esotericdetail]

@@kylegeldmaker Superficial is subjective at best, and for etching, it can be difficult to remove with heavy compound and a slow process. If somebody's looking for a higher level of correction, you need to sell them on a higher level process.

[@kylegeldmaker]

@@Esotericdetail Thank you. I understand what you're saying.

[@STILLNIGHTPEARL]

@@kylegeldmaker usually heavier swirls and heavier water spots that have somewhat etched on the surface requires more than just a quick AIO style pass that takes an hour plus around the vehicle. That’s more of a one step process, slower arm speed, moderate pressure; going over the paint with fast arm speed and light pressure is only going to brighten up the paint for the most part, remove some of that hazy look, light water spots, light swirls on soft paint, you’re not going to improve it much more than that. Like esoteric said, even some water spots barely come out with heavy pressure, slow arm speed with a heavy compound, and I agree, sometimes I take my rotary, wool pad, M100 combo and those suckers barely level out, and that’s a serious combo, paint hardness makes a difference, there’s just so many variables. These AIO products are great, but they simply can’t do it all, sometimes you simply need to grab a stronger dedicated polish or compound and adjust your technique. Like esoteric said, if the customer wants more correction, you need to explain to them what needs to be done, and adjust the price accordingly, don’t try to do it at a lower price because you’re going to work extra for it, and then feel like you weren’t compensated enough for all of that extra work, but remember that you promised those results at that price, so now you pretty much have to deliver at the lower price, you don’t want to have that feeling that you’re doing extra for free. Detailing is a lot of work, pads, chemicals, machines aren’t cheap, ultimately time is money, you got to make the best out of it.

[@roebbiej]

So light contamination doesn't have to be off beforehand? Thanks for the video!

[@Esotericdetail]

I would still at least do a chemical decontamination with something like Gyeon Iron first.

[@roebbiej]

@@Esotericdetail all right thanks a lot!

[@chrisjt7346]

Is this the perfect product for fast production shop?

[@Esotericdetail]

Indeed!

[@housedjnyc]

I’m curious how it works in the heat. Being mobile here in FL, I typically have to do cars outside...

[@Esotericdetail]

While we don't get as hot here, we still used it in some pretty hot and humid conditions this summer with no issues.

[@g..3095]

could you apply wax after?

[@lukeevans7598]

you could but what i would suggest is doing just a one step correction just to get rid of micro scratches and then use a wax after

[@alenmacak3427]

Can i use ceramic coating after this?

[@Esotericdetail]

No, we talk about this in the video. They will not bond.

[@HEMi1995]

Would probably be a great second step after a compound

[@Esotericdetail]

I'd recommend sticking with a pure polish after compounding!

[@Jan-zm2yv]

HELP PLEASE So I recently switched from my rotary DeWalt to rupes 15 inch with 6 " pad Dual polisher Watched bunch of videos and techniques Using blue and yellow rupes pad and blue compound and yellow polished. Took time with one panel . Washed , claybar , sanded gently with 3000 Did step one and two , slow motion , overlap the whole 9 yards And it looked absolutely stunning .....BUT 3 days later I saw it on the sun and 🤮🤮🤮🤮🤮🤮🤮 Scratches ( spider ) everywhere, color next to the door I didn't do was too dull as if I am looking through the fog .... I am open to any suggestions and pointers . Understand it is hard without seeing me working it but I figure I would ask anyway . Thank you

[@alexeyk.9144]

Rupes Bigfoot mark2/3 не будет даже близко резать так как режет ротор. Микрофибра, стриженный синий мех и т.д. не решат проблему резки. И диск на Rupes нужно предварительно загружать/ пропитывать, только после этого три четыре горошины и в путь. Я всю срочную работу делаю flex 2-14-150 с мехом. Rupes с жёлтым или белым полировальником только финиш. То что Bigfoot с микрофиброй или жёстким поролоном делает за полчаса или совсем не может сделать, роторный флекс с мехом делает за 10 минут. И расход пасты в разы меньше. После долгих мучений с bigfoot 21, заказал flex xce cordless. Думаю что принудительное решит вопрос. Завтра буду тестировать.

[@alexeyk.9144]

P.s. Сравнил три пасты 3d Speed/ Rupes One protect/ Koch p6.01. Bigfoot 21+ жёлтый круг/ синий стриженный мех rupes/ режущая микрофибра. Жёлтый круг очень слабо. Даже лёгкие завитки удаляет с трудом. Микрофибра и мех поинтереснее. Rupes и 3d похожи и режут слабо. Koch намного интереснее режет, но блеск не такой насыщенный.

[@scottohms2799]

Excellent video @Todd, how would you compare the cut & finish, minus the protection, to perfect finish?

[@Esotericdetail]

Apples and oranges, really.

[@Lornika100]

Can Uno Protect be used on hard paint? Like Audi?

[@Esotericdetail]

It can be used on any type of paint.

[@sonicwht]

Is that fine to apply coating over this product?

[@Esotericdetail]

No it is not. The waxes inside this product will prevent bonding of a coating. They soon will be releasing a similar product to this that is designed to put coating on top of it. Stay tuned...

[@billbuss7542]

What would you top this with if anything?

[@Esotericdetail]

Nothing. The person looking for this level of polishing isn't in the market for the highest level of durability. Quick, simple, and effective is the key with this one.

[@rodstawaa]

Could I use Rapidwaxx or Master sealant after?

[@Esotericdetail]

No need to. Could you? Perhaps. But is somebody at this level looking for really extended durability? Probably not.

[@hakman239]

Have you tried Koch f6 with rupes yellow as a one step?

[@Esotericdetail]

Yes, but it didn't best our reference combo...and we're here talking about all-in-one polishing; not one-steps.

[@hakman239]

ESOTERIC I know but it would make a good video comparing it to perfect finish

[@Esotericdetail]

@@hakman239 We do all of our comparisons and testing behind the scenes...

[@nomore10s]

is this product suitable for Boat GelCoat?

[@Esotericdetail]

It would be fine to use, but gel coats typically require a heavier level of polish. So it just depends on how bad of shape the boat is in.

[@greggriffin3242]

What speed were u on

[@Esotericdetail]

With this product we'd typically be somewhere between 3 and 4.5.

[@AK-xg7qo]

Perfect👍👍 supporters 🇲🇾🇲🇾

[@rogerrabbit1934]

Should you still cay the car first?

[@Esotericdetail]

If it needs it...

[@RM-iu6mm]

Great video, how long does the protection last?

[@Esotericdetail]

A couple of months...

[@benbirch2393]

Can you add a spray topper or really not?

[@michaelc4577]

Does this contain abrasives?

[@Esotericdetail]

Yes, which is why you can get correction out of it.

[@roycemcphee-bayha7394]

What is the real world length of protection this typically leaves behind? Curious if I could perform this in a vehicle and then coat with with say Jescars powerlock?

[@Esotericdetail]

You'd probably get a few months worth of durability out of this...similar to what you might get out of a wax. It would be worth a try to use Jescar on top of it as I'm not sure if it would have any potential bonding issues.

[@derekhanson4215]

I was wondering this same thing. I just did my car with Uno and it’s still sitting in the garage. I think I’ll throw some Powerlock on top and see how it goes. The Uno Protect was really easy to use. It had a long working time and virtually no dust. I think it’s going to be a great product to use to freshen up my paint every few months. My wash process is great so I don’t typically get scratches but because of where I work I get a lot of contamination on the surface that needs to be clayed off and then a quick polish afterwards. I think this is my new go-to product for this. 👍

[@joaquinmireles3912]

Only problem with it 9nly last three months 7se th uno protect advance it's 12 months of protectoon

[@lukeskywalker2013]

Quit giving away my secrets! Lol! I throw on a meguiar ceramic wax after. I feel like it gives it a better protection.

[@alexisamtosta]

I am about to buy this product. I have used the 3D HD Speed that is also very good. Have you used 3D HD Speed? From what I have seen with these all in one polishes is that the wool pads are the best combo for them. I love the HD Speed with a microfibre pad.

[@Esotericdetail]

A heavy cut pad like MF or wool would normally be the least popular with a product like this. The most common would be a foam polishing pad.

[@alexisamtosta]

@@Esotericdetail I have been using a MF pad with my 3D HD Speed and it does work very well for me. Of course MF pads dont work well on all paints. I also use Autoglym Rapid Renovator with a MF pad and also with a Wurth hard blue pad and both work very well. Those wurth pads are excellent. Im about to buy the Rupes Uno and the 3D ONE and will try both type of pads. Never used a wool pad yet but Scott from Dallas Paint Correction has a nice video using a All in One polish with a Rupes medium wool pad and its a very good combo.

[@on-site4094]

I’m familiar with 3D. I’ll give Rupes uno next time

[@AntLive29]

This is my secret weapon

[@Esotericdetail]

But it's not a secret anymore! :)

[@glowaxbelgium4257]

Menzerna 2500 best one step

[@Esotericdetail]

Would argue that with Sonax Perfect Finish, but this product here isn't considered the same as a one-step. With a one-step, you're typically going for as much correction as you can get with one type of pad and polish. With this, you're getting some correction with protection being added, and doing it quickly.

[@Esotericdetail]

@@SPPACATR Thank you!

[@virendrawate2128]

uno contain silicon

[@BadTrainDriver1]

Esoteric detail hourly rate: $135ish... 30 minutes to polish my car: $67.50 I'll drop it off tomorrow!! :)

[@AK-ui1zl]

Lol the prep work is what you’re paying the most for mate. 2-3 hours to prep for polishing.

[@sadaisebrenabravo5150]

30 minutes 2 guys.

[@Esotericdetail]

30 minutes, 1 guy!

[@chad..]

Your ad placement is terrible

[@jjjjjjjjjjjhjjjjjhjj]

How many pads would you use for something like this? And do they get caked up with product and need to be blown out?

[@Esotericdetail]

Probably go through 6 or so pads per car. Blowing out doesn't do much because the foam itself gets saturated inside.

[@samiyahanif7724]

All.in.one.car.polis.making