Mira Minimal Dual (ERD) Step By Step Installation Guide

[@mx54kev]

Just fitted one of these using push fits and copper tube will give you full flow but make sure pipe is supported close to mixer valve from behind as one of my pipes moved slightly when pushed on prior to cutting, if in doubt put a packer behind the elbows. Also would recommend trying the valve cover over the valve to align everything before putting valve on pipes as a lot going on in there that can catch as you put it on. Also valve cover seems to sit off the wall a bit don't know if this is normal but does not cause a leak.

[@yeknommonkey]

At 2:18 you don’t show the orientation of the spring washer things behind the retaining nuts. But they look like they are on backwards compared to the way they are shown in your diagrams in the booklet. Can you confirm that the ‘fins’ should point away from the wall as shown in the diagrams? Or towards the wall as they appear to be in this video. ??

[@jamesmetcalfe8509]

How do I get the yellow installation tool to disassemble my shower?

[@simonrees6028]

Can plastic pushfit elbows be used on the other end of the copper pipes behind the wall? Or would they restrict the flow to the shower? Thanks

[@mirashowers]

Hi Simon, the correct push-fit connections shouldn’t restrict the flow.

[@MultiJonv]

Hi… pls tell me how to remove the mixing valve as I need to change my tile.. I have been able to take out the temperature control and outlet connector… but unfortunately It looks to be very difficult to get the other chrome part out.. Doing DIY Would appreciate your help

[@CraftyTan]

Can you do one taking it apart plewse

[@curlypara9]

Hi @CraftyTan did you manage to disassemble this? I’m struggling to get the cover shroud off and wonder if you’d managed it. Thanks. Michael

[@CraftyTan]

@@curlypara9 we replaced the whole shower mec which part you stuck at?

[@curlypara9]

@CraftyTan Thanks for getting back to me. I’m struggling to get the cover shroud off. Removed the thermostat dial but can seem to pull off the cover. Feels like it’s clipped in somewhere and needs releasing and I’m pulling against the whole system.

[@CraftyTan]

@@curlypara9 Oh have you unscrewed it from the bottom? Underneath do you have the yellow screw for it?

[@i9580]

My Shower has been broken down and very difficult to find the spare parts with Mira. I need outlet connector (why this is plastic one?) damaged with in 1 year of installation and non-of the DIY shop has it. Could help me to get plastic white outlet connector and the orange tool that you used this is video please. otherwise need to replace whole shower

[@mirashowers]

Hi @i9580, I'm sorry to read that you've been having issues with accessing spare parts and my apologies for only just seeing your comment. We retain spares across all of our products, including those that have been discontinued which we hold spares on for up to 10 years. If you're still having issues, please don't hesitate to reach out to our contact centre who will be able to support you tel - 0800 001 4040, direct message on Facebook, Instagram and Twitter

[@curlypara9]

Hi @i9580 just wondered if you managed to sort this. It looks mine was installed without the outlet connecter. Having trouble taking the front shroud off.

[@samrasoliman7005]

How do I get the shroud off?

[@mirashowers]

Hello Samrasoliman7005 thank you for your message. To remove the shroud you will need to remove the upper rail, the hose and the outlet connector for the hose, then the shroud will pull off.

[@samrasoliman7005]

@@mirashowers thanks for the response - still couldn't get it off, just clicked in but no release to remove it. Didn't need to in the end as it all lined up so all good for now.

[@7_Olss]

See I’m currently mid way through this and I’m trying to change a single to a dual and it won’t remove

[@mirashowers]

Hello, Our customer service team will be more than happy to help advise further on the installation. If you visit our contact us page you can see how to get in touch www.mirashowers.co.uk/support/contact-us/ regards, Mira Social Team