Koi Pond Covers On made from Polycarbonate sheeting.

[@marekswan5093]

Brilliant idea using square section guttering for the supports,better than lugging my heavy 4'x2' frames about,thanks for sharing.

[@KoiChronicles]

Hey Marek thanks for commenting Sir, and your welcome. 👍#worksmartnothard 😉👌🙏⛩️🈂️

[@progressivepondkeeping]

Love the MGM intro 👌

[@KoiChronicles]

Thank you kindly 😎

[@KoiTimeUSA]

I love the intro also. great vid bud

[@KoiChronicles]

Thanks for the compliment buddy. Make sure you stay tuned for more. 👍🙏⛩️🈂️ P. S hope the cameras better later on 😉

[@andyfindlay8554]

Hello KC, very neat set up and covers. Interested in how the pond and filter is built, look forward to more videos 👍

[@KoiChronicles]

Thanks Andy for commenting and for popping in. Keep a close eye on the channel for more. 👍🙏⛩️🈂️

[@YimmersKoiNReef]

Nice setup! Subscribed!

[@KoiChronicles]

Thank you for stopping by Sir. 👍🙏⛩️🈂️KC

[@boxtriker]

Very neat finish them covers like it lots my plants I just leave in the veg filter after a trim and they seem to do ok over the winter. Thanks for you time filming and editing it I can see the effort and time put into it Martyn

[@KoiChronicles]

Thanks Martyn appreciate the comment Sir. Yes they sure do take some time filming and editing #allthebest👍⛩️🈂️🙏

[@boxtriker]

Mate you can see from my early videos how far I have come editing and filming I joined the after school video club with the kids at the school and have learned so much and its been fun learning with the kids as apposed to teaching them plus I made them all sub to the channel in that group. And with the kids in the Classes I teach about 100 of my subscribers are aged 11 to 18 and love following my channel

[@KoiChronicles]

@@boxtriker Martyn that's awesome mate, my better half's a teacher 👍 Fair play to you Sir. Ask them about my channel 😉 👌 #everydaysaschoolday

[@mountainkoi9673]

Great idea with the aluminium frame, wish I'd seen it before making my wooden one.

[@KoiChronicles]

Hi Mountain Koi #subbedyouup 👍 It wasn't just an idea of mine. It's specifically C- section for polycarbonate sheeting. There is also F-section have a #google about buddy. Thanks again for taking the time to comment. 👍🙏⛩️🈂️

[@Tom_Prendiville]

The long awaited koi pond cover video 👏🏻, may i take this opportunity to say you undoubtedly have one of the best koi pond cover ideas I've seen. Thanks for sharing KC

[@KoiChronicles]

Good Morning Sir and why thank you. 😁 #Simple #smart and #effective They are so lightweight and very very easy to move. Thanks for popping in as always and stay tuned 📺 Best Regards KC 👍🙏⛩️🈂️

[@barrykoikeepercooper8052]

Great job on the cover mate. I wouldn't of cut them plants down stick em in plastic tub with a bit of water and put them in your shed or garage. Now you have cut them I would just leave them their 👍👍👍

[@KoiChronicles]

Cheers fella and thank you for taking the time to comment. I'm not one for messing about. 😁 👍🙏⛩️🈂️

[@markcartwright4393]

Great ideas on your pond could you explain more about your pond air and how it works would like to know how you connect air pipe to conduit thanks

[@KoiChronicles]

Hi Mark and thank you. I will clear this up for you in another video. 📺 #staytuned Sir. Kind regards KC 👍🙏⛩️🈂️

[@markcartwright4393]

Thanks for quick reply will be interested in how it works looking to do something like your set up on mykio pond rather than have large round air stone pushed over to one side.

[@KoiChronicles]

No problem Mark and agreed Sir. They are out the way and I can still appreciate the Koi when they are on. 👍🙏⛩️🈂️ KC

[@douglasbannister9517]

Are you using clear or translucent polycarbonate sheet?

[@KoiChronicles]

Hi Douglas it was clear for me Sir. Thanks for stopping by and commenting. ✌️🙏⛩️🈂️kC

[@jop1928]

Can i ask how you fix the aluminium frame at the corners? Many thanks

[@KoiChronicles]

I mitered the corners so each piece married up and used fish friendly silicone to fix the together. Thanks for stopping by on the channel. 😎🙏⛩️🈂️KC

[@jop1928]

Thank you so much for replying, can you recommrnd a fish friendly silicone? Also what size of gap is needed under the covers. I see that you put yours directly onto guttering with a gap below the guttering. My covers will be fitted onto wooden shelf, but will need to leave the right size gap? Any advice is greatly receoved 👍😁

[@jop1928]

Also ive found some poly sheets triplewall in 16mm or 25mm. I now just need to find the aluminium section, in 18mm or 27mm or so to accommodate the sheets i go for. Not having much joy with the alu profile, can i ask where you got yours please 🙏, excellent work my friend 👌

[@KoiChronicles]

@@jop1928 No problem Sir drop into the FB group easier communication on this subject. 👍🙏⛩️🈂️KC facebook.com/groups/KoiChronicles

[@richbas2002]

Hello bud. Can u tell me where u got the aluminium frame bits for polycarbonate sheets. Thanks.

[@KoiChronicles]

Hello buddy long time no see 🤷‍♂️ Thanks for the comment, the C section is readily available when purchasing polycarbonate sheets. Came as 4m lengths. Great hearing from you again. #staysafe 👍🙏⛩️🈂️KC

[@richbas2002]

I always watch your videos matey. Never miss them. Thanks for ur reply. I got polycarbonate sheets. Just need to fit it out. Keep up the good work.

[@thepondowner]

How much does the sheet cost and we’re is the best place to get it in your opinion

[@KoiChronicles]

Hi Aldo and thanks for stopping by, There are many Trade/Consumer suppliers out there Sir and price always depends on size of sheet and thickness. If you look further into my channel library there are plenty of ideas involving #KoiPondCovers 👍🙏⛩️🈂️K

[@therockakaada6109]

Oh boy 🤦‍♂️🤦‍♂️🤦‍♂️🤷‍♀️🤷‍♀️🤷‍♀️

[@KoiChronicles]

Thanks for watching Sir and hope you're well. #SuperThanks 👍🙏⛩️🈂️KC

[@ianj6857]

Bad sound, can hardly hear you.

[@KoiChronicles]

Thanks for watching and for the feedback Sir. 🙉🙏⛩️🈂️KC