Matco Tools: New Spark Plug Sockets, Brake Line Wrenches and The SALE Wrenches Finally Arrived!

[@rogercoffman6472]

Sick to my tummy I didn't see that wrench steal...I mean deal

[@chryslertechnician3439]

Sorry for commenting 100 times but what is neat is the fact that Michael was a technician, and being a dealer technician myself, a lot of the things he says I relate to and he has a lot of knowledge on tools and the auto industry which helps him be a great dealer 💯

[@charlesshankle3178]

The best tool truck reps were prior techs. I am thankful that my Matco and Cornwell reps were prior techs.

[@Terry_Baker]

Going to have to ask my Matco dealer about those sockets, they look awesome!!!

[@chryslertechnician3439]

Michael has that truck super full and organized! Good job Michael and his Pretty woman 🙌🏼

[@MrSpartanicus]

Johnny Watters Im callin it, pure MAC truck envy. Hell im jealous of it and I’m not a tool dealer.

[@scott1708]

Yes, a year later it is still as neat, as organized, and as full as it was the first time we saw him...

[@davidwalle5025]

Good video great to see mama michael running the show. The wrenches are a great deal.

[@rlenoxIII]

I use a Milwaukee 3/8” right angle impact to get the plugs out of the 5.4L Ford. Works great

[@kingsporttoolreview8703]

Last April the Government sent everyone a stimulus check, three months later MATCO has a tool box shortage ---- Hmmmm Coincidence?

[@drippedoutnick5053]

On one hand I understand where Michael's coming from I absolutely can not stand a watered down drink but then on the other hand i will always choose a nice cold drink over a warm one. 99% of the time I won't have the drink long enough for it to get watered down lol. I always tell the people light ice in my drinks. Some places go crazy on the ice and you end up with hardly anything to drink

[@MrSpartanicus]

A jest in good fun, new nickname “Salad Spoon Michael”

[@nickshowsstuff435]

Embarrassing I can’t eat out with someone that would do such a thing😂😂

[@marclowerysr1006]

bought my spark plug sockets after watching your video great buy.

[@Rick_Dunaway]

I agree 100% with the need to have a drink while I eat! I've gone as far as to take my glass to the kitchen and request a refill if the drink machine is not accessible on the floor. Personally, I do not mind getting up to get my own drink. And this method is effective but it will not win you any brownie points with the wait staff. So use at your own discretion...

[@scubbarookie]

Great deal on those wrenches! 👍 I really liked the spring loaded, swivel spark plug sockets... I can imagine all the different scenarios with those. Thank you Clay! 👍

[@216mechanic2]

I like those brake line wrenches especially that flex head which can come in handy. I ordered those xl wrenches when that sale started and my matco guy was like they are on back order...his truck is so un organized that he had two sets on his shelf that I found. He didn’t even know they were there. I got lucky lol

[@stevelapointe140]

I'm with Michael if I have to put something on a steak once it is on my plate it is not a good steak. Great video Clay. Keep up the great work.

[@niteninja0133]

Those hose removal pliers work awesome. I couldnt get a PS hose off a nissan and fought and pulled and yelled at the hose and tried talking nice to the hose and it still didnt come off so i borrowed those pliers and it came off nice and easy. Worth the money

[@charlesshankle3178]

I prefer bright orange also. My box, my tool handles are orange when possible. Being a Texas Longhorns fan is an added bonus so I can justify my orange

[@jeffreypitt1684]

5.4 3 valve spark plus will come out intact with a 3/8th impact gun. I was a Ford Master Tech and we did this all the time. Now I am retired and don't have to worry about these things now.

[@edgarsanabia6874]

I have a snap on pick for going around hoses and I have the pliers they work good for like trans cooler hoses smaller coolant lined ect. I like them

[@Metalstorm56]

Good on Michael happy to see that he is doing well

[@quiksol]

I am not in the trades and dont have a tool truck, wish i could buy those wrench sets, hell i would even pay shipping...that deal is amazing, thats the price of a Icon set.

[@jimhaines8370]

I have had those hose pliers fromLisle for years and use them all the time, with out those sometimes I don’t think some lines wouldn’t come off

[@isaacpargas5158]

I got the spark plug spring loaded set today, love then. Thanks for the video!

[@farmer8957]

Try a set of whisky stones in ur drinks ! It’s a lil ice cube shaped stone u freeze , it don’t melt and u don’t have to drink hot coke like a lunatic

[@biggiefitz6275]

I'd rock that North Carolina blue box. It looks good!

[@Lukey741]

I’m really sad I missed out on those wrenches. I tried to get with a distributor but he hasn’t gotten back with me in months, can’t believe he doesn’t want my business. Kinda left a sour taste in my mouth. Anyways love the videos Mr. Koon! Keep it up👍🏼

[@kanjorsx4969]

Muller kueps has a line wrench set that looks exactly like that probably another rebranded product that Matco slapped their name on

[@Toddford1568]

I do the drink on the side and I don't like ice in my drink. Also the lubercant we use is nut cracker by rubber seal

[@aknonnerd]

I love to see a video that you get one of these guys on the other dudes trucks be super fun I feel like.

[@WizzRacing]

I just got some Gentos GZ LED lights made in Japan...These things are insane bright. I got one shop light up too 4000 lumens. They even included 5 foot AC charging cord. You need an adapter to US plugs. Tool trucks need to sell these things. There not that expensive when compared to cheaper Chinese junk...

[@alexgoalby9485]

Slowly working my through Clay ! Midnight over here in the UK...

[@jrbpit1]

$149 for those wrenches is a steal. I just got a 15” 1/2 drive 90 tooth flex head ratchet from SK for $62.00 with shipping. I suspect the tool manufacturers are doing stuff like that just to keep the lights on during the rona.

[@TheTheomax]

I love some Ranch dressing even better when it's not so thick like I've had at some restaurants almost like they poured something in it. I will say this I don't think it will do anything for cat hair?

[@niteninja0133]

Where is snap-on Friday? That's my favorite day of the week. I look forward to it

[@KoonTrucking]

Hamilton was off

[@andrewbooher1106]

Hamiltons on the beach drinkin a beer lol

[@6.4DieselDoctor]

My dealer was doing the virtual tool show

[@scott1708]

What happened to his boy Thomas? Did the kid let point of his cocky wisecracks out at the wrong time?

[@Fordcrownvicp71]

I hear yaa, I wish I could just tip the cooks cause they are the real MVP. Too many servers don't do there job correctly. And my tip is mainly based on the food N drinks

[@nevillepretorius8948]

That wrench deal is awesome! Wish we had a Matco dealer! 👍

[@codyrobertson4630]

That's a nice looking spark plug set

[@matthewmartin7639]

I'm just as bad as Bill used to be, but I'm a bright orange guy. From my box to my tools to my Tennessee vol football. That's the one complaint my snap on rep has with me. He has to special order orange tools for me which just kills him being a Crimson Tide fan.

[@donaldhollums3278]

That's funny right there, Martin. Roll Tide!

[@asmautollc]

Ooh stubbies on sale soon! Might need to grab a set of those. I’ve got a good assortment of the ratcheting. The regular not so much.

[@nickshowsstuff435]

The trailer would actually be a good idea you can put a few tool boxes in it and save space for everything else in the truck!

[@gregcothrum4045]

Great video y'all have a great one and stay safe 👍

[@leandrewcordova3990]

My 2005 GMC Sierra 5.3 vortec had one sparkplug work it's way out middle of the night and I just put it back in side of the road and went on about my business lol

[@Toolaholic7]

With flare nut wrenches,the good ones don't spread.I like the Snap On flare nut wrenches for this reason followed by Mac.The cheap flare nut wrenches I would not spend money on,skip sizes and spread out easily.Lot of times I use my air ratchet to take out spark plugs only and install the new plugs by hand.There are GMs you can easily can get to the plugs through the wheel well.This is with the Chevy S10 and S10 Blazers.I replaced plugs in a 1986 El Camino,2 of the plugs on passenger side and one on the driver's side were loose.had a hell of a time getting the plug wire off of them.I have had a meal for free once,forgot to make my order.

[@russellsmith1651]

I actually have one of the light blue roll carts, got it $500 cheaper because of the paint defect. Great cart, love the color

[@chryslertechnician3439]

Going to have my dealer order me those brake line wrenches! That flex head is great

[@charlieretherford]

How much does Hamilton charge for the 18 volt snap-on batteries and the 14 4 Snap-on batteries

[@charlieretherford]

They need to make those with the magnet instead of the rubbers

[@turbolifestyle6548]

Agreed, the Matco magnetic set is my favorite I’ll never go back to rubber spark plug sockets

[@williamunruh3838]

Can you do a review of the new Matco 3/8 20 volt impact.

[@KoonTrucking]

Already done it kzbin.info/www/bejne/qWeyfZ56qpaInsU

[@bjblanchard1508]

I like those liners he has on the shelf

[@ronbowman4145]

They say that behind every good man is a woman rolling her eyes, although she didn't actually roll her eyes I love the looks on her face when he was telling about his picky eating and ice issue.

[@billycoppenger3706]

All you guys I just love the videos

[@niteninja0133]

My dealer has 1 of each of them carts on his truck. Dirt will stick to them and you'll never be able to clean it off either. It's a rough surface

[@BattleDroid134]

I like my cokes in a can in a cooler full of ice. That way the can is as cold as can be and i put it in my SO socket can coozy. Amazing never gets water down

[@dieseldoctor9294]

YT has not been sending notifications the last 3 or 4 days for me, good thing I know the upload schedule!

[@KoonTrucking]

Haha 🤣 one thing everyone can agree on is I am consistent on what videos and the times ! Haha never know what it will be but something will be there!

[@Toolaholic7]

Same with me too,never sent me one when Joe was on Monday

[@pelotas56]

Like snap on and the bed liner tops. They always seem to bubble and peel

[@RichTeaMiniatures]

I love the look of those matco 3/8 ratchets you just can't get them in the UK 😔

[@Re_DEEMD]

Salad without lettuce 🤣 that’s pure gold

[@godfreyappliance5585]

Way to go Michael. I do not eat lettuce on my salad either.

[@jimhaines8370]

Matco Mike has lots of rules for eating out LOL

[@avvenrichmond980]

You can get a set of sunex wrenches 8mm to 32mm for $135 on Amazon

[@claytonscheiber3493]

We dropped 250 on my son's birthday cake a few years ago. It was bitchin. They did a great job. It was a dinosaur and it looked pretty damn real. But 250 on a cake? Boy, my son is lucky hes an only child. I'm with ya on the waitin on a drink and a seasoned properly steak. I hate waitin for a drink. When it's gone and I got food left that I'm still eatin, I'm not happy. Theres nothin better than a properly seasoned steak. No sauce garbage.

[@robertandreoli9764]

Michael is one awesome dude 👍

[@harveysmith100]

Regarding the hose removing pliers you looked at, "Amesie's Automotive Corner" had them in his top ten tools. He is a good tech so worth looking at them.

[@scott1708]

I have a set... might not be in my top 10, but most definitely worth owning for $10. The 2nd and 3rd puctures on Amazon (Lisle 47900) better show how they work.

[@asmautollc]

My Matco dealer’s dad is a Matco dealer as well.

[@nickhouze8849]

I heard a rumour of some newish exclusive ball joint set matco has or is selling if so get Michael to show it !

[@KoonTrucking]

We showed it when it first came out that’s been a LONG time ago. I actually have one

[@nickhouze8849]

I'll have to see which video it's on.someone was telling me the other day making it sound like it was yet to be unvieled

[@jeffmoses5383]

Great videos. At the 11:40 where Matco Michael is leaning up against the box I spyed some cool black magnetic bowls/trays down by his right hand. Are they a Matco products? Does anyone know where to find some?

[@jeffmoses5383]

Sorry after getting through the 18 pages on the search I found them on the Matco website Part No. MMHCUP3

[@kanjorsx4969]

Motivx tools started that spring loaded universal socket design again another tool Matco slapped their name on

[@trenton12515]

Those pliers are rebranded also. I got a Carlyle set from Napa and compared them. Same cast marks and everything.

[@upnorth5465]

Don't see those companies coming directly to your shop to sell them now do you?

[@kanjorsx4969]

Justin Boyer yeah the whole coming to your shop argument is irrelevant now my dude considering the speed of shipping now a days I can buy a new tool and have it at my door the next day same thing with warrantying tools sunex and tekton are prime examples of how easy and fast it is to warranty tools now a days

[@jbcustoms-jeff8436]

Hey Michael your not the only one that doesn’t eat dressing on salads. I never have liked dressing or steak sauce

[@ryand8281]

Steak sauce is for one reason... to help a shi&*y steak lol

[@chryslertechnician3439]

Man those are nice wrenches!!!

[@PaganWizard]

Sending out my prayers for Michael's Mom!!!! Where did Michael get the metal American Flag hanging on the wall under the key rings??? I really need one of those!!!!!! 6:30 Very nice pliers set, but uummmmmmmm blue, please. 24:50 Clay......Hidden Valley makes a few different flavored ranch dressings you have to check out including bacon, garlic, and, avocado, they might even have a cucumber flavor too, I don't remember, but they are deeeeeeeeeeeelicious. 26:25 Michael, I have had a very similar experience in a restaurant, and I left a three penny tip for the waitress. Every time after that if we got seated in her work area, I immediately asked to be re-seated in a different area of the restaurant.

[@bradfaught1695]

I'm guessing the alternator Michael did was on a toyota sienna?

[@siedpe13]

Enclosed trailer, aka the warehouse

[@stevebanda8776]

I’ve still been looking for a smaller ratcheting line wrench. I seen tribus makes them but there too big. Need a 3/8 and 7/16, 8mm 10mm. Oem tools made them years ago on another video I watched but there discontinued.

[@KoonTrucking]

They are fixing to release smaller sizes pretty soon if you can hold off a little bit. They should be pretty awesome.

[@chryslertechnician3439]

Oh I need one of those shirts!

[@Jester_1]

My region never got the deal on those wrenches, and looks like were not getting the stubby wrenches deal either :(

[@KoonTrucking]

That sucks

[@mikeholt3545]

That's why I drink mine fast love my sweet tea!

[@upnorth5465]

I'm with you. I'm easy to please. All you need to do to get a good tip is keep my drink filled. That and don't call me hun, sweetie, or anything else like that. I'm a grown ass man for crying out loud.

[@ig8575]

Slick give away shirts 👍🏼👍🏼

[@irvingtriggermortise9321]

Yes you can tip the cook. If your steak was cooked to perfection, You can get the manager give him the money and her will give it to whoever cooked your steak. I also agree if you need any type of sauce on your food it was not good to start with. I can not stand having a $20 something or more piece of meat and then covering it with all this stuff till you can't taste the meat you are paying for. And I agree on the watered down drinks. been doing no Ice thing for years and years.

[@williamsinclair4482]

I'd buy that flex head line wrench set if the flex could lock

[@scottluthi4839]

Is it common for a 4s made in January to be sold for 10k, 18k+ with interest?

[@KoonTrucking]

Seems high

[@TinoR626]

I didn't even pay 8k for my 6s triple bay that way just made. White with purple trim.

[@danieltubbs458]

Hey Clay, on Monday are you able to remind Joe about my streamlight please. Thanks, he hadn't responded to my text yet regarding my new cap.

[@KoonTrucking]

I forgot best thing is to text and call him over and over. I personally can’t be responsible for Joe and his poor business habits of ignoring people. I know guys think I joke when I state that text him 3-4 times and he will eventually get back with you but I’m not. People complain to me about it but I don’t run his business. He’s got a very one track mind.

[@larryborkstrom3580]

Thought I was the only one who drink a warm soda

[@michaelsieber6601]

I didnt think anything besides tool boxes were matco made lol

[@chriswilliams1595]

UK here

[@tylerpearce2891]

Can a regular joe order 🔧 from him cause that wrench set is a hell of a deal and i need to upgrade my long 🔧 set

[@KoonTrucking]

That wrench set was in the flyer a couple months back and anyone can buy the same deal even from Matco online but it’s just during that sale when they are that price

[@tylerpearce2891]

@@KoonTrucking gotcha well I will have to pay attention to your flyer videos more

[@travisrader648]

Where's Hamilton this week

[@emroatanathach2165]

I thought he said “ass”... it was “ice” 😂

[@cucolopez1942]

No ice, I drink my bourbons neat

[@donaldhollums3278]

Snap-on has a father-son rep duo over here. The son runs a route in the area of the side of the I-State I live on and the father rubs the area on the west side of the I-State from me. that's a hint for Michael and his son. Or do you think Michael's son will start a Cornwell route? HA!! I don't like "Lite" beer, that's just a glass of water to me; Naw, it's a full beer only.

[@ericgunter45]

Ice ruins a coca cola, I want them either room temperature or so cold its almost slush.

[@CCxKiller13]

Part number on the hi viz liners @ 4:12?

[@hughbetzer5274]

Where had wild bill been?

[@KoonTrucking]

Off with his dad

[@Chadh4x]

@25:55 is you're brain flip flopped lmao!

[@swimjigjake3567]

So does matco in fact make their own ratchets?? Or do they outsource and slap their name on them? I can't seem to find out.

[@KoonTrucking]

Matco doesn’t manufacture any of the tools they only make their toolboxes but they have tools built to their specifications, some are only exclusive to Matco such at the ratchets. They are made in USA I’m pretty sure in Illinois from what so have found out. The only way to get them is Matco

[@vallito11]

Part number on the wrenches please

[@Chris-cu4ge]

Hate when I cook a steak for someone and they ask for A1

[@FusionBoost2.0]

Hot Coke, dear lord lol

[@mramseyISU]

You guys would hate eating out in Europe. The waiter takes your order and does not come back to the table. They figure if you need something you’ll ask. Then again you don’t leave them tips over there either.

[@odomandr]

Cheese bacon and ham is not salad

[@keithmerce3863]

Is it really salad with out lettuce?

[@nickhouze8849]

Chicken or tuna salad lol