Snap On Friday: This Impact Is Destoyed

[@jrbpit1]

My first tool truck experience was with Mac. I bought a 30” breaker bar, 3” 1/2 drive chrome extension, and 16” ball peen hammer. Mac guy gave me a couple of hats. I thought I hit the lottery. Super nice guy.

[@gaelicstorm7]

Just what I needed ...just attended my father in laws funeral..needed cheering up

[@KoonTrucking]

Oh man I’m sorry for your loss but glad we could brighten your day up a little bit and get your mind off things even if it was for just 20 mins or so

[@gaelicstorm7]

@@KoonTrucking thanks buddy

[@danieltubbs458]

Sorry for your loss buddy. Just lost my grandma and it’s rough HMU if you need anything. [phone]

[@anthonythompson4110]

I've shot plenty of 9mms but the only time I've ever used a 9mm socket is like Hamilton said, a 10 was rounded off and I beat a 9 on it to get it out

[@forgedsteelwrench9249]

I just used one the other day. Fords have very strange socket sizes at times. This particular situation was on a f150 extended cab, the little vent window frame uses eight 9mm nuts all the way around.

[@SUMDUDE.]

Ford used 9mm on their quarter glasses for years. Only thing I have used a 9mm on

[@BaltazarSMZ]

Some old honda atvs also use them

[@kimojon9665]

I've got two of those breaker bars and also the large breaker bar ratchet...LOVE all of them!!!

[@nevillepretorius8948]

Tool truck talk with Hamilton is always awesome! 👍

[@malan828]

Mann!! You and the TODAYY IS FRIIIDAYYY IS STUCK IN MY HEAD! Hahahaha i bought a couple ratchets because of you

[@krugmanlandscape1]

If you work in the Rust Belt 9mm 6MMS etc all the odd ball sizes become extractors

[@Mopars_41]

This week did suck, worked on a 2012 Autocar Xpeditor Trash truck. Needed a rear main seal, started tearing apart Monday, got the trans out yesterday took 4 days to remove an allison transmission. Rear main seal was easy at least.

[@KoonTrucking]

Oh that sucks !

[@austinwilson8929]

Ive used a 5/8 12 point 3/4 inch drive socket on a shear head at my work, 4 bolts that hold one of the knifes on it are 12 point with a 5/8 head.

[@Rob_Basich]

I worked for a large auto recycler and forgot my almost new 3/8 Snap-on impact in a car that was placed in the crusher before I realized it was missing. We had to cut the car open, but the impact survived with a twisted handle. Made me sick to my stomach 😫

[@KoonTrucking]

Oh man that sucks

[@jeffreydevoti7000]

My go to cheater pipe is the handle off one of my floor Jacks. 😁

[@brandonsizemore3619]

A few years ago I watched helplessly from across a field (albeit arms waving and screaming as loud as I could) as my brother-in-law dropped a loader bucket on a brand new Stihl 025 chainsaw. Stihl replaced the plastic and frame and only charged for the parts and labor. Nobody works like Stihl though

[@jefferysmith5280]

That battery crimper would make a good nut cracker

[@nickhouze8849]

That snappy 3/4 ratchet is tough..busted a yoke nut free on a 78 ram charger of a buddies like I was busting a a hose clamp loose ..that things a beast

[@Frankie_M.]

He said $425 for the sockets plus tax $700 😂🤣😂🤣😂🤣👍🏼👍🏼👍🏼✌🏼

[@danieltubbs458]

Nah not that bad

[@danieltubbs458]

Tax is only 10.25%

[@Tap-a-roo]

I put a 4’ Snap-on jack handle on a SN24 breaker bar. No issue. No flexing.

[@mikeluffy]

@Koon Trucking if you got snap on flyer december 2020 please make a video of it please and thank you

[@1hasbeen531]

That crushed impact reminded me of when I was in the saw business. Stihl had just rolled out the 066 and the first logger that bought one only made a couple cuts before running over it with the skidder.

[@KoonTrucking]

🤦🏼‍♂️

[@KoonTrucking]

That’s my luck

[@josephriddle2772]

Oh-boy Clay, go my snappy tools and swag today 🔧🔧🔧🔧🔧

[@jordanpizer1707]

The very best day!!!! Keep it up clay. Unfortunately I work tomorrow too 😂

[@jasontompkins4341]

I do like the 3/8 electric ratchets I've got them in matco as well but the 3/8 slim impact ain't got nothing on my matco 3/8 stubby she's four years old but she still gets it done I used my snap on 3/8 impact today to do some light semi trailer work and it didn't seem long before you heard it be maxed out struggle to tighten bolts and loosen them my matco one will break them if you ain't familiar with it

[@gregcothrum4045]

Great video y'all have a great weekend and stay safe 👍

[@codywrites]

Best day of the week!

[@U_ever]

I had 5 freakin' Mondays this week but this little piece of artwork you 2 crafted made it all worth the wait ! Keep 'em comin' Clay !

[@KoonTrucking]

Haha I feel your pain man I’ve been waiting on today since Monday morning

[@robertbates8599]

I love when you two get together!!! Joe in the early week and Snapon Friday!!! Must see channel!!! I love my snap on guy which actually is a very close friend of mine but I told him last night when he dropped off a used box in my warehouse that I want a snap on guy like you have because his sense of humor…… I could hang out with that guy all day long and drink 20 beers at a clip and I don’t even drink! LOL

[@KoonTrucking]

Haha 😂 it’s fun we have a good time. I’m glad others enjoy it. Many fuss because we don’t always focus on tools but many enjoy it because it gets their minds off things for a bit.

[@robertbates8599]

@@KoonTrucking Keep doing what you do! You give a lot of instructional videos to accommodate the ones that want the tools. You do a amazing job and I try to catch you live because I will try to donate. I donate to a lot of tool channels now VCG is one of them and you’re up there of one of the best out on KZbin! I really mean that! Again you do an awesome job!! Also I love your honesty…… It comes through to your viewers and with that being said anything that you recommend I don’t even question and I would buy it instantly!

[@KoonTrucking]

Thank you very much I appreciate the support.

[@ruebenoverton2996]

I have that same snap on 1/2in rachet, the best rachet on earth, mine is still undefeated it broke loose 1 1/4 u-bolt nuts on a Pete, rachet was damn near bent 90° and came back to strait.

[@dj85rocco]

Hamilton be slacking on the new flank drive pliers. Got mine Wednesday and love it

[@arenaissanceishman6689]

Hamilton may very well be the best snap on rep in the world. Wish he was my dealer

[@nuclearexplosion5841]

1st FINALLY the very best day of the week

[@jeramy2398]

My old cornwell guy told me he stopped at farm got of truck seen they were using loader tractor to lift on 3/4" breaker bar

[@KoonTrucking]

Hahaha 🤣

[@pooinyourass]

Only reason I bought a ez red 3/4 extendo ratchet was because I watched Stephen Cox use it on a hydraulic cylinder rod nut On a grader 2+" socket , used his service crane too break it lose with the ratchet fully extended and it didn't break any teeth or nothing. Looked for the video but I think he deleted it when all that de monitization was going on or still is

[@goldhunter9641]

Clay clean the CV boot off good with brake cleaner and take some super glue and add a pinch baking soda to it and mix it up and cover the pin hole on the boot And then put a touch of 2 part epoxy or Hot glue over that to help hold and seal the super glue and it'll last for a while that way

[@Toolaholic7]

I was given a Snap On hat with a purchase once.I have zero regrets when I bought my 3/8 short brute ratchet,fits my left hand perfectly besides the button trigger and selector.I do wipe it off with tub o' towels when not in use.Had my appendix taken out when I was 13,cyst taken out in my lower back twice,vein stripping due cellulitus.Do have to watch big time with my dad's side of the family,heart problem history.

[@fuzzytek2794]

Used a 9 on furnace repair last week.

[@jordanfixesstuff1492]

The new flex head Cordless Impact has arrived. Hamilton always on top of getting the new power tools when it comes to power tools.

[@mikehuff2173]

I have bought many tools after hearing you talk about them. I don’t regret a one of them!! I love the tool advice and that CT761 14.4 3/8 is one of the best darn tools I own now!

[@mike_holdread]

I've heard of people running over their phones with a forklift, but never an impact.

[@guyconnell2250]

1999-2013 Harley Road Glide headlight adjustment takes quarter inch deep 4.5 metric.

[@andrewgarcia1250]

I work on forklifts for a living and that ct761 is my absolute favorite 2nd would b the 3/8 long neck ratchet. Greatest tools ever!

[@KoonTrucking]

Yep ! Both are my favs

[@ncwolfneck]

Just got long neck HO 3/8 ratchet. It's great

[@denissession9423]

9mm on Porsche Macan and. Audi rear wheel alignment adjustments, a lot of vitamin c will get rid of those kidney stones , a lot of laughs on this episode

[@Na7ure]

My Pontiac Vibe (really a Toyota Matrix with a Pontiac shell) uses 4.5’s to hold the blower motor in behind the ecu up under the passenger footwell Random fact I know but Hamilton was talkin bout. 4.5’s so I figured I’d throw that out there hahah

[@coreysuttles1362]

Laughed all the way through thank you for that!

[@KoonTrucking]

Haha glad you liked it!

[@vincenth6603]

That axle boot installer tool has special c/v boots.

[@workingmanpatriot8760]

I work in a "job shop that supports manufacturing" the fork lift runover deal is very rare but does happen. We buy our own tools but if destroyed by others the co replaces it. These things happen, who pays is the deal.

[@Jetli120]

It really is the best, I use it more than my Milwaukee stubby impact ever since I got one

[@davidwalle5025]

good Friday video.

[@bluefj-wc3vz]

Great Friday vid with Jovin lol

[@peterchristlieb]

I miss Hamilton and Snap On Friday. Sometimes, You guys had so much on screen chemistry, as the viewer, you felt like you knew both of you for years and were laughing and bullshitting with a couple of old friends.

[@henryg683]

a friend of mine had headaches so bad that the police wanted to take him away for DWI made him blow and felt bad that they didn’t believe him!!!!!true story!!

[@Adams_Grage]

The end of this was hilarious

[@roarkfabworks]

I need that socket set. Not sure if he will ship or not though.

[@dutchynehtam]

I can understand high prices on heavy equipment. Anything that says CAT, you can take and say it’ll be 5x what any other manufacturer would ask for. Our 345b CAT excavators are a pain when they have any issues.

[@OffroadTrucker740]

i love the sound of a 345b. are parts hard to get for on that model these days? id love to own one, or any pre teir 4 machine.

[@chuckbean7851]

Long week has come to an end FINALLY!!

[@KoonTrucking]

Finally !!! Thank goodness !!! I’ve been waiting for 5 days this week for today to come !

[@chuckbean7851]

@@KoonTrucking same

[@horaciogarcia7215]

I broke my snap on 3/4 rachet on a jd 644h loader hydraulic cylinder i was supposed too rebuild it out in the feild i didnt check my torch tanks i had no acetelyn used my crane too pull the rachet and snap packed my shit and left my snap on guy was not happy gave me a hard time didnt want too rebuild it for me i contacted snap on talked too a few ppl and at the end they sent me a brand new one sent the broken one in the box back they said keep the new one

[@davidpinnix7446]

I guarantee someone would try to get warranty. Good video

[@markarmstrong3394]

Man thats sad ! Poor impact

[@LuisFlores-eo6mh]

Yes that ct761 is the best impact

[@ericluba6287]

That's a damn good price for that set considering 24-piece of the long and small is 5 something

[@paulmendenhall5226]

Any Snap-on guys out there have a empt20 magnet i had one and let someone use it never came back i have been trying to find one for over 10 years

[@johndeeretech10]

Just a heads up, If you need a new axle for a 4 wheeler or side by side check out sixity.com. They’re axles are awesome and cheap! You can often find a coupon code to save a little more too. Check them out

[@alexwheeler8026]

Does he still got that set??

[@alexwheeler8026]

17:20 time stamp

[@thomasweatherford4975]

Got and vintage snap on box today it's a kra380a from the early 1980s I think. It's missing the badages. Can the badages still be ordered. And what are this boxes worth?

[@brandonrobishaw7606]

Thick wall is a harmonic balancer socket.

[@sebastiang9435]

Finally friday

[@leviperez5072]

799.99 😂😂😂😂😂tool only 😂😂 I love this guy

[@kevindavis6042]

I've used a 9mm once to remove a shock

[@spartenj]

I wish it was finally Friday..I’ll be working the next three weeks straight. Still an awesome video as always.

[@KoonTrucking]

Oh man that sucks but on the bright side .... Christmas money ! What Uncle Sam leaves you anyways

[@EdAtoZ]

Koon, On the subject of the new Snap-on pliers why not use a 8 inch adjustable wrench instead ?

[@KoonTrucking]

Well mainly because they have them now and I don’t own them ..... hey at least I’m honest right?

[@Austinthoms5575]

Hey Clay I have a 3/8 stubby milwaukee already do you think the 14.4 snapon 3/8 inpact would still be worth buying or are they effectively the same.

[@KoonTrucking]

The Milwaukee is stronger. We proved that in our impact test videos on each of them. The 14.4 is much slimmer to get in tighter spots and the rocker trigger is nice on rusty bolts because you can go back and forth with them

[@brandong1990]

That cable crimper is the cats ass ain't nothing better

[@brandong1990]

Matco has one similar to that and a threaded style both are nice for different situations i like the fact I don't have to pull the cable off of the truck just over to the frame a smack it with a hammer a couple of times

[@danieltubbs458]

Come on guys 30K views and like hardly any likes. Smash that LIKE BUTTON!!!!!!!

[@theone9564]

Long week. It's a hard week when you get all parts for all units you working on at same time.

[@eddean6663]

What is the part numbers for that? 😁

[@patrickwb24]

Not sure if you have answered this question in another video that I may have not seen, but do you know what brand of lubricant/grease Snap On uses in their ratchets and other hand tools? On the topic of broken products, i can say the brushless polisher/prep tool is a huge improvement from the brushed model and i run it hard. Thanks!

[@KoonTrucking]

Snap on has a tube that comes in the rebuild kits with them clear tube no name. Try superlube if you want to use something good

[@patrickwb24]

Thanks bud

[@stephenross9282]

Only thing I got for free was a hand scrub brush. And my dealer was gonna charge me to but the others guys told him to give it to me for free especially since I just dropped 12k for a tool box lol

[@alexklayum4188]

Is it possible to order the outer shell for battery power tools?

[@kennethsouthard6042]

Little JB Weld should fix that.

[@larryborkstrom3580]

Another I don't like about battery tools made of plastic air is tougher

[@messagedeleted2797]

Yeah, but carrying the compressor around sucks after a while.

[@KoonTrucking]

Yep and stronger and lighter and oil or diesel doesn’t hurt them and they are faster and never need charging.

[@anthonythompson4110]

Damn Clay! I've been in two branches of the military, been to combat multiple times, I've broken almost every bone in my body, and kidney stones are the absolute worst! I've passed enough kidney stones to pave a highway. I've had two that a surgeon had to take out! I've been shot, and I've had kidney stones. I'd rather be shot once a week than to have another kidney stone

[@KoonTrucking]

Haha I have them all the time ! At least 2 a month

[@donotrobme9295]

I guess all the guys that pay fir hats on jovin truck know they aren’t good customers ha ha

[@chuggywuggy3370]

How much for the hard handle screwdriver set?

[@travisrader648]

Clay would you check for me I'm wanting Mac screwdriver set the red hard handle old style see if they still make them we don't have Mac dealer

[@j.walker3498]

Okay that head survived a forklift without being crushed that says a bunch.

[@DGFishRfine1]

Until he got to the part where the forklift ran it over, I was thinking "It died after falling off a forklift?!?!?"

[@Metalstorm56]

I had a rubber tire front end loader run over my 14.4 3/8 impact broke the nose cone off

[@mikeevans5112]

When are you going to do a another one!!

[@747rotate]

Ha I guess running over tools with a forklift wasn't part of Snap-on's testing

[@nickayivor8432]

❤it

[@dylancolburn5296]

I think it’s destroyed no destoyed

[@dylancolburn5296]

You still never corrected the title to destroyed lmfao

[@andyarmstrong5378]

Does snap-on make a 3/4 ratchet that doesn't have the removable handle

[@jimhaines8370]

9 and 11 have become brake bleeder sizes now

[@fastlanecarcarellc3608]

Yep. Had this happen on a jeep I was working on. It had one caliper that was aftermarket and my 8 was too small, I grabbed the 10 and it was too big. I thought noooo, it can't be... But it was. 9mm.😂

[@nuclearexplosion5841]

Hey Clay, just thought I would let you know that when I tried to buy something at vamplier tools the code in your description didn't work

[@KoonTrucking]

Ok it may have expired ?

[@nuclearexplosion5841]

@@KoonTrucking ☹

[@joshuaadams291]

RTV the small holes in CV boots

[@asmautollc]

I already had the Milwaukee 3/8” stubby and I bought the CT761 after it just because of the glowing reviews by Koon and others, out of curiosity. Yeah, it is awesome!

[@KoonTrucking]

They are awesome !

[@tcharlesmatos5388]

Does Hamilton have a social midia?

[@KoonTrucking]

Facebook

[@stevenwdoolittle1195]

Do they sell a 2 pc.(split boot) Boot for them clay?

[@KoonTrucking]

Not that i have found

[@stevenwdoolittle1195]

Try rock auto under universal split boots by the MM

[@richardcotner2297]

I have spent over 30,000.00 dollars on my snap on truck and have never got one thing for free so it just gos by the dealer

[@mramseyISU]

The dealer makes a huge difference. When I was a kid my dads snap on dealer would stop by the house on Friday nights with the truck and I got free shirts all the time.

[@brucerichardson5647]

I replace my own cv boots.

[@brandonkelsey4676]

Was it 3/8 drive on the repo or 1/4

[@KoonTrucking]

1/4

[@brandonkelsey4676]

Thanks if it was 3/8 consider buying them already have the 1/4 set

[@adamdaniello2300]

Don’t buy those boot tools. They’re dangerous. Just separate the axle on one side and buy a boot kit from moose racing. Clean repack and reassemble put back on sxs you will hate that boot tool trust me

[@mikeevans5112]

Hey umm do you do snap on Friday every Friday??

[@KoonTrucking]

Snap On videos on Friday Matco videos on Saturday Every single week. Click that subscribe and hit the bell notification

[@mikeevans5112]

@@KoonTrucking ok every Friday snap on??