This is the most realistic installation of the Mauslane range hood on KZbin. I have seen the installation video from Mauslane (manufacturer) and some others, all of them skipped the holding of the hood before the screwing of the hood to the çabinet bottom. Yes, the Mauslane official video used çabinet jacks, but the hood just "magically" transported itself from the island to the top of the jack. In this video, the hood was on top of the head of the installer, you saw the struggle of balancing the weight of the hood while locating the hood to the wall opening. Not a pretty picture, but real. It is this kind details make this video priceless to those of us feel ease before installing the hood...
@lolboy-6429 ай бұрын
do you mean hauslane?
@dougmetcalf51735 ай бұрын
These hoods are terrible, why in the world they don’t use top down bolts like a microwave mounting system is beyond me. The screws are a mess, the hood is heavy and unwieldy. Don’t even get me started about having to use the “filler pieces” of board on a recessed cabinet(which I have, doom on me). First attempt at this is ended with the cabinet so damaged I don’t trust the screws now, going to get some bolts with some large washers to spread out some of the stress loading. The hood is beautiful but the install is horrible.
@KSMP44228 күн бұрын
I put two L-angles on the side of the cabinet that the hood slid on it like a drawer. The supported tge weight & I could easily mount the hood & screws. It also takes the weight of the back support
@SandeepGoraya7 ай бұрын
you recorded each step , one of the best video for insallation for Vesta Atlanta ... thank you
@michaelj.sullivan19683 ай бұрын
excellant tutorial on the installation, you took the fear out of the unknown, thank you.
@13nohead2 жыл бұрын
You videos have helped me a lot. I work maintenance at a hotel and I'm always having to repair drywall and paint etc. Thanks man
@rupinderpandher291511 ай бұрын
Salute to u .. it’s really heavy me and my husband just got frustrated while installing this one..may be u r a professional who does it just in a click😃
@debralynnbailey6527 Жыл бұрын
Thank my hubby needed help and his Dad passes so this sure helped him. 🇺🇸❤️
@ramoneshere2 жыл бұрын
Great video. I am about to do my install tonight and this will be great help. I am going to use the round top cut out and go through the cabinet and duct it out through the wall to the outside.
@saivongnakhone4631 Жыл бұрын
Thxq for the video I'm going to install my hood range this weekend.
@bemeup7 Жыл бұрын
Thanks for all to the tips, and this will make my installation soooo much easier. Linda
@RitzaM_19657 ай бұрын
Awesome install!! Thanks SO much!!
@alhambra1192 жыл бұрын
Good job! We are about to install one tomorrow. Thanks!
@ef4264 Жыл бұрын
Thank you for the instructional video!
@andyrusso65992 жыл бұрын
Worth the effort. Thank you.
@youaxeng2 жыл бұрын
Great video show how install the vent
@chrismoran2619 Жыл бұрын
Great vid. Thanks!
@billon2wheels Жыл бұрын
Good job!
@ptg016 ай бұрын
Well done ! You should have played the lotto too ! Curious, how do you know that the venting behind is spot on ?
@KooperSalmo5 ай бұрын
I just got lucky that the previous manufacturer of the hood that was in this home was in the same exact placement as the new one
@miaomiao8292 жыл бұрын
I hope to see how the duct is connected to outside. And the actual vent power eventually goes out?
@urielgomez3701 Жыл бұрын
I was wondering the same thing.
@hazzy90794 ай бұрын
Thanks for the video, it's really helpful. Can i know were the 2 screws enough to hold the range hood in place?
@KooperSalmo4 ай бұрын
Any hardware store make sure to have washers
@husseinharb25092 жыл бұрын
Hey your video helped a lot but I have the same one I'm trying to install and you want to fast on the wiring
@mytho11375 ай бұрын
Since my vissani is ducted to the outside, do I still need to use the carbon filters?
@Mr.G.77 Жыл бұрын
The existing vent going through the wall is rectangular as well?
@topcat59922 жыл бұрын
Nice video, did you have to add something for "make-up air" ? Usually the local county has a limit (400 cfm) where you don't have to worry about "make-up" air.
@richardiporter Жыл бұрын
Thanks !
@drk6799 Жыл бұрын
How has the vent held up? Any issues?
@KooperSalmo Жыл бұрын
No issues love it
@UstinMalapagin2 жыл бұрын
Weight of this range hood is around 40 lb. This guy is a monster if he can hold it with his head.
@ptg016 ай бұрын
I know right ? Seems a bit risky...
@frgggggdsedd691329 күн бұрын
Hey how is it holding up? Does it remove smoke or steam from front burners?
@KooperSalmo29 күн бұрын
Love it works great
@annonemus21 Жыл бұрын
when you are grilling meat in the oven and you open the door, can the range hood handle the smoke coming out of it?
@KooperSalmo Жыл бұрын
Yes it would
@dsertwq3 ай бұрын
did you use spacers under the cabinet since it's recessed?
@KooperSalmo3 ай бұрын
I don’t think I did this model had a very solid sheet of steel
@beantown_bennie6935 Жыл бұрын
Ill be installing one of these soon. Question. The space between the cabinet bottom and hood top if seen some recommendations that you cut some planks to fill and then screw the range to into them instead of the cabinet itself. In your video looks like you go direct. Did it pose any issues?
@ptg016 ай бұрын
Looks like no response.. My take is if the bottom of the cabinet is FLUSH, then no planks required. Else, I would screw in planks front to back on both side to give it a better grip. The top of the hood must be flush to the bottom of the cabinet surface...Hope this make sense.
@richardgrant7235 Жыл бұрын
CFM = cubic feet per minute😊
@scottpatricknow Жыл бұрын
Where is it venting to? Not good venting to attic.
@KooperSalmo Жыл бұрын
It’s venting outside
@bobbychamberlain11949 ай бұрын
I'm impressed 💯 i think ur amazing n u did a great job 👍.