Korda Boom fluorocarbon rig : Using the boom material to make a ronnie rig also know as spinner rig

[@kghwanadoo]

Watch those Krank hooks they are SOOOO sharp, guaranteed to not only catch carp but the odd finger too! Nice video.

[@nickward5190]

Hi mate the best Idea is cut the boom at a angal and then it's more easyer the put the crimps on

[@mariocatalinilie4396]

El boom hay que enderezar estirando con dos puller.

[@johneturbo]

Hi Darryl, I use it on a Heli set up myself. If I used it on a lead clip I'd make the boom a little longer

[@scolemans]

Make sure you use the right krimps with boom as the old ones will break ! The new ones are copper and work much better 👍

[@johneturbo]

Good point, hopefully all the new krimps are the newer ones now

[@hogawitcha1970]

Cut the boom line diagonally and it will slip into the crimps better.

[@170adamb1]

Been making these myself but pushing the crimp right up to the swivel as per instruction on back of crimping tool, to stop it slipping. Do you think it's better to leave a bit of a loop to allow the swivel to move? Cheers Adam.

[@johneturbo]

Hey Adam, The Korda guys used them with a loop at both ends. I've been using them with loops at both ends of the boom, and I've had fish up to 35lb no problem. I like the loops for extra movement. I aways give the boom a good pull with pulla tools to make sure it's all good.

[@170adamb1]

Johneturbo cheers I'm now putting 2 crimps on as mine just to be sure and am leaving a bit of a loop at both ends.

[@johneturbo]

I think the crimps changed recently, I can't remember exactly the reason. might be worth looking into as you might have the older crimps.

[@170adamb1]

Johneturbo I'm probably worrying too much. Can make them slip quite easily with pullers but is probably more pressure than a fish will put on em with drag set right etc

[@darrylclarkson1799]

Do you use this on a lead clip or helicopter set up?

[@michaelradford373]

So much putty!! Way to much want it sinking slowly rather than dropping like a lead.

[@gertmeering6270]

Nice , better use the ''fox kwik change pop-up weights'' instead of putty..... it looks better en works better.

[@johneturbo]

The good thing with the putty is you can add more or less easily, also it sticks on the crimp nicely

[@Enpassantful]

The only thing I don’t like about this rig is the rip-off price of the pliers, could you get away with using a standard pike pliers used to make up wire traces?

[@johneturbo]

Joss. I know what you are saying. but i wouldn't trust anything else to crimp them. especially on my lake where bites are few and far between! i'd be gutted to loose a fish because it wasn't crimped right. I guess you could try and see how it hold ups when you give it a good tug oh-er

[@Enpassantful]

@@johneturbo Thanks for the reply, pike pliers have the same grooves in them so should work exactly the same, nothing ventured as they say. 👍

[@jasonnewton3842]

If you do a demo ,make sure it's all in shot or it's pointless

[@johneturbo]

which bit wasn't in shot? the only bit i can think of is when I crimped down the end, however, I'm sure you don't need a demo on how to use a crimp tool lol

[@mattholmes2589]

Pretty much the same as a ronnie rig

[@Commander_Krill]

Far to much going on with that rig

[@arfurfoxhaike]

What exactly do you mean? can you explain what you mean by far too much going on . ?

[@ernstcoetzer809]

Get some scissors man...