I've been eyeing up these fans for like 2 months now, and I'm genuinely hyped that you're reviewing them. 👌
@KosherTech3 жыл бұрын
Appreciate that 💯
@blizruby3 жыл бұрын
same actully this video made me so hyped to buy those fans. thank you very much for doing that video, Koshertech!!
@KosherTech3 жыл бұрын
Thank u guys for enjoying em ☺️
@blizruby3 жыл бұрын
@@KosherTech 😊
@sod1kov3 жыл бұрын
@@KosherTech whats your RAM model?
@welcometoronsworld65893 жыл бұрын
Yes CoolerMaster fans are coming up as well as there cases. The fans are super nice with nice heavy and durable plastic molding which is superior, but once you mention no light adjustment and you got to change everything in the ARGB software but overall nice and looks good in a white case.
@xcloudx_2 жыл бұрын
How’s the airflow and the temps compared to the sickleflow? Debating on these two for my next build?!
@docholliday62962 жыл бұрын
You need more subs. You have a refreshing tech channel. Thanks for the info on these fans man.
@MohamadYoussef-kc5fsАй бұрын
I just built a PC with 7 of these fans and the hub and absolutely stunning. Evey fan is adresable can be programmed for different colours and patterns. The dual rings just adds more vibrant colours and style. Must be used with rhe hun to get the best out if it.
@thunderarch59512 жыл бұрын
You can also buy one of those third party argb controllers, since these fans come with the 3pin and not a proprietary, and they also come with the remote If you pick a good one you'll also have a variety of RGB effects
@saitamajr122 жыл бұрын
I bought just one unit of this fan, but the 140mm version, it's a great fan so far, the led ring is very beautiful, the air flow is strong, and the best, the connector is the standard 5v ARGB 3-pin, it worked with a simple Coolmoon controller. The only concern is with the screws, the head is not wide, in my case (corsair 4000d) the screws almost did not hold. Another problem with my corsair 4000d (in fact it depends on your point of view) is because my fan is 140mm, some parts of the led ring were covered in the front panel.
@astro897210 ай бұрын
is it software controllable ?
@robertweekes57832 жыл бұрын
These are sick fans. Would be nice to see a slow handheld camera pan, or another shot of the inside toward the front. Wondering how good the rear sides look
@dronzer007 Жыл бұрын
Nice guide, I was going to build a pc soon and the fan connections were my biggest issue. This video just made my life easier.
@holdenfuster2582 Жыл бұрын
thank you so much, I suck at wiring and am a bit dumb sometimes, have never done this before so your tutorial helped me out alot more than you think. Thank you
@bajerle2 жыл бұрын
you don't have to use software for the mobo or the fans. SignalRGB works with CM argb controller, same with the fans. after setting up correctly all works similar to iCue. Cheers!
@nottoolive2 жыл бұрын
would any brand fan work (asia horse) withe cooler master argb controller?
@downundergarage69682 жыл бұрын
Hi Mate, greetings from Australia. For me its about the execution and fine details. If i am after a white fan i want it to be fully white so this included white cable, white hub sticker and white rubber pads. Hence why the cooler master makes sense for me. CM ML fans can be had here in Australia for 25 AUD or about 20 USD. So the price is also right.
@Cranji Жыл бұрын
thank you bro weve been confused for a week
@lexx__fr2 жыл бұрын
Thank you for reviewing these fans! I had doubt on whether to buy them or not, but this video convinced me to!
@samt.13563 жыл бұрын
You didn't show how to set up using bios. That is the one I most need
@CristuelCasto2 жыл бұрын
Thanks for the helpful video. I was really going crazy trying to set up these fans. The instruction was a little bit too complicated, why do they never include written instructions instead of these drawings? Still, thanks to your video, I was able to set them up. My problem now is that, since I'm using the splitter, the motherboard refuses to detect the presence of the fans so now they're at full speed and making a little bit of noise. Is there a way around this problem or I'm stuck with fans rotating at full speed?
@AhmadMaseh2 жыл бұрын
Do you not have any other unused PWM headers ? Some motherboards have up to 4
@CristuelCasto2 жыл бұрын
@@AhmadMaseh I was able to change it through the BIOS menu, so it's no longer rotating at full speed. As to why it was not detecting its speed, I have no idea, but it's working now.
@42orangeman2 жыл бұрын
Awesome vid, I've been confused with how dasiy chaining works and how to set up fans using the 5v argb header but this video cleared it all up
@kpadalldotablet10092 жыл бұрын
The EZ DIY and other Chinese knock offs are usually rated at 40K hours mean time to failure (MTTF - or average failure time). The Cooler Master fans are rated at 160K MTTF. So, in all fairness, we should be looking at technical specs also, since the MTTF rating is how long the fan lasts. 40K vs 160K MTTF is is over x4 longer life for the CM fans. Incidentally, the Noctua Redux fans, also excellent fans, have a 150K MTTF.
@Sam-to1zg2 жыл бұрын
18:00 for controlling brightness use Cooler Master Plus+
@lesterjohntalde2962 жыл бұрын
it doesnt detect lol
@gabecu42092 жыл бұрын
Hello!! Been thinking about buying new fans and just want to make sure that all the products that was shown in your video is included at the amazon halo cooler
@jranberg394227 күн бұрын
Anyone else having their fan bearings making noise ? i have 9 MF120 fans in my case and the 3 on top that is used as exit fans have started making noises after about a year and a half 🤔
@JayzBeerz3 жыл бұрын
I just got these today and they look great. But as far as keeping the case cool they are so-so. And one of the fans started making a grinding noise right out of a box.
@Blyyyyyy3 жыл бұрын
That happened to me too, check if any wires are in the way.
@bajerle2 жыл бұрын
just replaced a set of Corsair LL120 for the same amount of MF120 Halo and the Coolermaster one's are MUCH louder in person...
@mikheim40402 жыл бұрын
can you review these fans again using COOLER MASTER GEN A1 LED CONTROLLER? 😊 I HEARD YOU CAN CUSTOMIZE EACH LED USING THAT CONTROLLER 😁
@sageofsixpath993 жыл бұрын
hi, can i connect this to argb fan hub of pc cooler(5v) corona the one taht you reviewed before? im planning to buy just 1 fan of this coolermaster halo(as repalcement for the air cooler fan),, although the fan hub of corona have 4pins, but i bought an additional corona fan but it comes with 3pins so i just punch a hole on the connector using heated paperclip so that i can insert it to the hub good thing it works,.
@KosherTech3 жыл бұрын
Lol nice
@kireyeve37673 жыл бұрын
they look pretty nice, still sticking to my fans :D not fan of no hub again. but I got a gigabyte x570 board and got two 3 pin headers. so the newer gigabyte boards come with 3 pins now. like you said it mostly older once. nice video as always it was FUEGO
@KosherTech3 жыл бұрын
Lol appreciate that 💯☺️
@muixgohanx35792 жыл бұрын
Sickleflow also come with the AiO's which means that the Bigger Blades ist just for the H20 movement and the Halo's are just for Normal Case or CPU use case
@jhulenoscarantezanamendez6106 Жыл бұрын
The Illusion AIO comes with Halo's, so they are fine for AIO
@ryqnvfx2 жыл бұрын
@KosherTech are these fans compatible with asus aura sync? Am I able to use the remote outside of the case or is it attached to the fans inside?
@purplejoeyo7359 ай бұрын
that case looks gorgeous what case is it?
@quantikosound Жыл бұрын
Hi and many thanks for ur usefull content! Im planning to install 9 Halo fans (I will buy 3 kits with 3 fans each one), so can I wire all 9 fans between them and connect to a controller included in the kit or need to wire every 3 fans and cinnect every connection in the cooler master argb hub (if I remember right its not included in the kit)? Thanks in advance
@duncandonuts52683 жыл бұрын
I have a white Cooler Master AIO in my Phanteks P360A, and I wanna match the fans, but the Phanteks fan's RGB is some of the nicest RGB I've ever seen!
@dharkbizkit Жыл бұрын
thing about these fans is: 120mm is in white or black. 140mm is only black.. why coolermaster, why?
@jrwong21813 жыл бұрын
Do they sound noisy when in a quiet room? Thank for answering
@KosherTech3 жыл бұрын
Nah they'll b good
@dancedany11 ай бұрын
I don't have the Rainbow colors anymore. One morning it was gone. Now they have only red and blue colors. Any thoughts?
@frog7118 Жыл бұрын
I'm about to try to take ML240R ARGB AIO and add Halo fans to it along with 6 Halo case fans. The ML240 controller has 4 ARGB ports so I will daisy chain 2 fans each to the ports trying to keep the load down. The ML240 controller has a USB 3 port in the bottom that can be linked to a USB connector on the mobo to give me access to Cooler Master's control panel (I hope). My mobo doesn't have a dedicated ARGB connector. Expensive, but all 8 fans should be the same.
@ClassicDura3 жыл бұрын
Would say that the MF120 Halo Duo-Ring or Asiahorse FS-9002? When you reviewed the Airhorse fans it looked like they had more customized lighting, or did you just not demonstrate it?
@KosherTech3 жыл бұрын
I'd go with the mf120. But remember they're best utilized with aRGB software
@gracefulmender3 жыл бұрын
I have the same case as you. The Corsair. iCUE 465X. Did you get the HDD slot inside the case? I managed to but that really made the stuff around it tight inside.
@KosherTech3 жыл бұрын
Yeah but I removed it
@McNizzle3172 жыл бұрын
Where do you put that little black box? How do u cycle thru the colors when the reset box is hidden?
@noostNL Жыл бұрын
Bought the MF120 halo set 3-1 and I got a whole different controller. Not even a controller because there is no button on it. WTF
@boabs3 жыл бұрын
good vid man good detail best ive seen
@marleyonthemove80582 жыл бұрын
Would you pick these over the DEEPCOOL CF120 plus?
@justinhoang9922 жыл бұрын
Hi, I really like your video, great work!!! Just wondering if this will work if I chain this with the Lianli ST120 (3pack) (you had reviewed) + B560 gigabyte mobo that has ARGB headers. I might only use the accessories that come with the Lianli, not using any extra hub or so, and control it using Gigabyte software. I know that you mentioned in the video it doesn't work with Giga mobo, but not sure if there are any updates. Hope someone can help me with this. Thank you.
@Just_a_Bit3 жыл бұрын
Hi I have a question, can i control the fan light and ring light separately from the controller ? Like if I would like to use ring light one day and change to fan light another day ?
@siccmike843 жыл бұрын
Great video! Love the breakdown! Just to recap I bought 7 of these fans but 140MM. My motherboard is a MSI MEG Z490 GODLIKE. It does have compatibility to use the 3-Pin headers. Is it required to use a Hub. Also do you recommend using and cable splitters or just straight daisy chaining them since I have 7 fans. Love the content!
@KosherTech3 жыл бұрын
Honestly whichever way you think works best for your setup or for your cable management & thank u!
@tejaskn45913 жыл бұрын
@@KosherTech ur wish
@ruzaqir354 Жыл бұрын
u can now use the 9 pin usb connector on ur mobo to control it gen2 rgb led
@adambomb10172 жыл бұрын
Did anyone have any issues with the screws included with these fans not really fitting very well in their case? For my case the flathead part of the screw is barely wide enough to hold the fan on the fan mounts without the screw from going through the mount holes on the case. My fans are all installed and holding on my Lian Li Dynamic Evo but I’m afraid they will come loose over time and the screw will slip through. Does anyone have any recommended alternative screws for these fans with a wider flathead?
@nickgarcia12923 жыл бұрын
Hey what about the masterplus software? I ordered 6 of the black fans and plan to use the hubs with masterplus software so I can control each individual led color. Hoping it works as I expect it to. I do have 2 argb headers but with the mb software you cant control the individual lights.. By far the best video for these fans it's great thank you
@MrAckers752 ай бұрын
Why do people insist on putting an exhaust fan above and in front of the cpu cooler ffs
@jayruka25083 жыл бұрын
What about using a remote control hub from something like Montech Z3s or LEDless controller? I wish CM would just make a fully remote controlled hub instead of RGB MB bloatware or the internal hub.
@KosherTech3 жыл бұрын
It might work 🤷♀️
@cinabiitgaming2 жыл бұрын
Hi, iv recently just bought 2 cooler master mf120 halos and daisy chained them together both have the rgb on but only one is spinning, any advise would be massively helpful
@afro.sensei2 жыл бұрын
I have a question, my mb only has 1 4 pin rbg header but I have one non argb fan and 3 argb fans, how do I get them both to be connected to that 1 pin? Do I have to just use a hub?
@TheTriangle4442 жыл бұрын
Will it light up even if i dont plug in the four hole plug?
@amineaminos4185 Жыл бұрын
can i change it with the fans of the my cooler Corsair Hydro Series H75 V2 ?..thanks
@iikarko11 ай бұрын
With the hub it comes with how many fan can i connect to it
@Domniak3 жыл бұрын
Either it's the camera or I don't really like how they look, i guess the build quality is nice, but idk it's kinda like a seethrough rgb fan, like you can see through them, this is what makes them so weird for me
@angeltensey3 жыл бұрын
They look nice, the rgb is very smooth and pleasant, but they have quality issues that re inconsistent from fan to fan: defective (dead or flickering) leds, bad balancing, vibration and motor hum. Im considering buying more expensive Arctic argb fans just to get rid of problems.
@supremeoverlorddiamontethe45573 жыл бұрын
@KosherTech Love these, have 8 in one of my builds (Meshify C Mini to boot!). Yes, they do work with Gigabyte RGB Fusion/Mother Boards and they look spectacular! However they do not work with Cooler Masters own MFY-RCSN-NNUDK-R1 RGB controller, like the one included in the Mirage 240 AIO. Not sure why, maybe something to do with mirage effect but only a hand full of Cooler Masters other fans do.
@fubar3953 жыл бұрын
Good to hear. I have B550 Gigabyte board and was interested in these fans. Thanks
@shreyashchauhan63593 жыл бұрын
www.coolermaster.com/catalog/coolers/rgb-accessories/argb-led-controller/ Will they work with this?
@KosherTech3 жыл бұрын
I actually just bought one from Amazon. It should make it work idk I will review it
@supremeoverlorddiamontethe45573 жыл бұрын
@@KosherTech I have had mixed results using many ARGB fans with the Cooler master MFY-RCSN-NNUDK-R1, it seems like maybe 2 of the wires are switched. Right now I got it working with 2 stock ARGB 120's from the CM Mirage 240 AIO & 3 Deep Cool ARGB CF120's. Had to make custom splitter and couldn't get more than 5 total fans going through the controller.
@KosherTech3 жыл бұрын
Swing by our discord server let us see plz discord.gg/f5g7NA4
@ploshi Жыл бұрын
hi, i’ve connected the fans to my mobo, is it still possible to control the functions/colors though the coolermaster software ?
@SENPXL2 жыл бұрын
so if i use the software i can make it white and etc? like theres more modes??
@ElShosto3 жыл бұрын
I'm thinking of getting cooler master fans and an AIO liquid cooler. Would you personally go with a 240mm cooler with MF120s or a 360mm with sickleflows?
@lukefrench4643 жыл бұрын
I used them on a 240mm with a 7 5800x never went above 65c for me I now use them on a 360mm
@macblink2 жыл бұрын
they look GORGEOUS indeed
@airsound52 жыл бұрын
Hi, Nice fans! any idea if there is any option to keep RGB only on a ring and disable the inner light? Thanks!
@kayliz18722 жыл бұрын
Did you find out?
@ehme15063 жыл бұрын
those sleeved cables you have are sooooo nice
@KosherTech3 жыл бұрын
Thanks 😊
@uctran1942 Жыл бұрын
hello, i have a question, if i want to install 9 pcs of this fan, could i sync RGB with main with only 1 port 5vRGB or 12vRGB, cos my mainboard has only 1 port 5vrgb and 1 port 12vrgb, thanks
@mohamedhabibi13842 жыл бұрын
I have a gigabyte z390 gaming x motherboard. If I buy these fans what will be the downside of it?
@tejasparab23893 жыл бұрын
Can we set different colour on fan led and different on ring led? Do we able to see led hot spot? I hate them Which one should I buy? These mf120 halo or deepcool cf120 plus?
@KosherTech3 жыл бұрын
I reviewed those fans check em out. I really liked the Cooler master halos alot
@tibrewa68793 жыл бұрын
Is there 3 pin splitter i have 2 types of fans in my pc but my motherboard has 1 argb header
@Psycrovv2 жыл бұрын
So if im using the ARGB on th emotherboard..can i then install 7 fans or am i limit to 4 fans on one ARGB connecter on the board since i think they only allow 4 units on 1 argb port
@mythydamashii9978 Жыл бұрын
Im confused i didnt get the small hub but a big hub and the slots are weird so are the cables
@Zmappingss Жыл бұрын
Same, i have those 3 sharp pins on tbr controller
@chinesejohncena91379 ай бұрын
I installed these fans on my Corsair AIO
@aaronhumphrey7464 Жыл бұрын
will this work for the razer chroma arbg controller?
@rafwijnen54613 жыл бұрын
On my case i got a LED button on top of it, it was for the old fans so can i connect that to that controller and you think it will change the colors?
@KosherTech3 жыл бұрын
Yeah it should
@04jaywilli19753 жыл бұрын
Kosher, in your opinion, what are the best white argb fans to get?
@KosherTech3 жыл бұрын
Damn that is a tough one. I maybe should just do a vid about that. I really like these to be honest.
@04jaywilli19753 жыл бұрын
@@KosherTech if you could do a video, stating your favorite fans, that would help out a bunch!
@KosherTech3 жыл бұрын
Brah brah I will try it would be a great idea thank u!
@sbryant.813 жыл бұрын
How do I control the lighting for the mf120 halo's? The cooler master software doesn't work and I can't find any other software please help.
@KosherTech3 жыл бұрын
How u have em connected. Swing by our discord server we'll help u out discord.gg/f5g7NA4
@juanchicho64263 жыл бұрын
Can I use this fans even if my motherboard doesn't have an ARGB header with that cotroller?
@KosherTech3 жыл бұрын
Yeah of course that how I was using those fans
@seaneckhart9914 Жыл бұрын
They had a very annoying humming sound around 1000RPM. I pushed them to 1100 and its completely gone
@BlueSharkRides Жыл бұрын
Warning to those buying these fans. The LED's will go full yellow over time. I had to replace a exhaust fan barely and the LED's do NOT match anymore as the other older fans are completely yellowed out. Never noticed until I had to replace this rear fan.
@dodysher3 жыл бұрын
I see you are obsessed with white :)) Not all fans white are beautiful, but these fans are extraordinary, and i'm very pleased you make them a presentation. I like how you present all of stuff. Ok, if you like so much white, please put youre hands on a Arctic P12 white and if you want blink blink (leds) put them some halos from phanteks, you will like them. P12 are very powerfull, quality and silent even at 1800 rpm. Nice presentation man, increase in work and much success in the future!
@KosherTech3 жыл бұрын
White just shows better on camera thus improving your viewing experience
@dodysher3 жыл бұрын
Yes, you are right. On camera are beautiful, but in real life are extraordinary. I have the black pieces and i love them. I like how you pronounce ”sliky flow” :))). Keep up the good work, I am keeping my eyes on you! :)
@KosherTech3 жыл бұрын
Lol appreciate that bredrin 💯
@Brykeise253 жыл бұрын
That wasn’t white right after that cyan blue?
@IzziksGames2 жыл бұрын
Can i only turn on the ring and turn off the fan light?
@seifhamdy576811 ай бұрын
Them or xigmatek starlink ultra?
@drewoo6118 Жыл бұрын
7:42 WOOOOO😂😂
@niko_okin44303 жыл бұрын
would you prefer the mf120 clone or the actual mf120 for the price I'm debating whether to buy the Chinese clones since they are half the price
@KosherTech3 жыл бұрын
Which Chinese clone I think of?
@sijedevos23763 жыл бұрын
I’m looking to upgrade my pc visually and was thinking about getting a Corsair 4000d airflow with 6 white fans. I have a msi x470 gaming plus with a 4 pin rgb header. Software is horrible and indicator leds for ram and gpu are always on and only red unless I turn off the rgb functionality. So they basically need to be controllable outside my motherboard and any software or I will have red leds screw up the color scheme. Preferably pwm fans so I can control speed through the bios. I also plan to put 2 on my aio. Budgets for fans is around €75. Any suggestions?
@KosherTech3 жыл бұрын
Man I reviewed plenty of ChineseRGBFans check out my playlists. Or my top 7 rgbfans
@sijedevos23763 жыл бұрын
@@KosherTech thanks I will
@poepflater Жыл бұрын
I'd save a bit and get the cooler master ones with 4 addressable rings...
@Luka.Perovic3 жыл бұрын
so if my motherboard doesn't have a argb header, the fans will spin but the rgb won't work?
@KosherTech3 жыл бұрын
The aRGB will work but u won't have the complete functionality of the fans.
@randymartin91303 жыл бұрын
just pure awesomeness
@brentbell50772 жыл бұрын
I plan on using these fans with the razer controller.
@wavyspooky82792 жыл бұрын
Can i Daisy Chain 10 of these? case- Td 500 mesh Aio- Nzxt Kraken z73
@djangojansen76482 жыл бұрын
Nah
@twentyonenix83863 жыл бұрын
Hey are you going to review the IN WIN Sirius pures in white?
@KosherTech3 жыл бұрын
Hey thanks for the heads-up about em fans. I just added em to my amazon cart. But the fan isn't RGB though just the outer ring only is. However I should be able to cop em, again tha ks 💯 for that suggestion!!
@twentyonenix83863 жыл бұрын
@@KosherTech np, i built my o11 around them and i made a youtube video on it, should give you an idea
@kameronsalas8964 Жыл бұрын
I wanna know what case that is
@bunnyrabbit2851 Жыл бұрын
which case is it?
@1930sumit3 жыл бұрын
Can u please tell me how max speed of these fans at 1800rpm
@przemysawingielewicz93803 жыл бұрын
I would like to buy such a set only in black.
@jackoff694202 жыл бұрын
Thx mate love you
@mawarriors26603 жыл бұрын
Can i buy 3 pack of 3 in 1 and then get 2 1fans pack and connect them together
@KosherTech3 жыл бұрын
I believe that will work
@PersonManManManMan3 жыл бұрын
What is temperature difference?
@vasilisbill3 жыл бұрын
@KosherTech my motherboard has 2 argb fan headers and they are connected to 6 argb fans (3 each on each header) and i want to connect 9 argb fans total in my case. how can i connect them all? do i need some kind of hub? mobo is asus x570 e-gaming.
@KosherTech3 жыл бұрын
Swing by our discord server brah brah we'll help u out discord.gg/f5g7NA4
@darkknight23463 жыл бұрын
The best choice is to use a SATA Powered ARGB Hub
@vasilisbill3 жыл бұрын
@@darkknight2346 Yeah i figured. I got a sata powered argb hub from amazon with 10 argb outputs for less than 10 dollars. I now have only one cable from mobo connected to the hub, and from there everything connected to the hub. Case is so much cleaner now. Now i have 9 argb fans, 1 argb gpu bracket and gpu rgb connected to the hub directly.And i still have 5 free ports on the hub. Works great with Aura! It literally saved me. No need for expensive hubs like corsair's or sticking to only one brand with its ecosystem. Thnx for reply btw!
@Skourken Жыл бұрын
Do these work with the razer chroma?
@vaggeliskiriak Жыл бұрын
No
@aubreyonthemove3 жыл бұрын
Recently got a new case with these fans and they put my old ones to shame lol. My old ones look like cheeks.
@mariospanayiotou66443 жыл бұрын
I want to ask, do you see any hotspots with these fans? Like, the individual leds.